CHECK-OUT THE FULL ISUZU D-MAX BUILD HERE -> kzbin.info/aero/PLloptHW8MGGhzVQRkJaMUeCIUh5ZEplfB
@bonkendlela7140 Жыл бұрын
Thank you, I’ve been waiting for this video for some time. Now I’m waiting for the 12V socket in the loading beam 😊😊
@mountainsstreams2133 Жыл бұрын
Great video! Ordered mine last week through Opposite Lock.
@MissLeeMusic Жыл бұрын
Hi Adam, thank you very much for this video. I would love for you to test the integrity of the rain getting in. I would much prefer this optionif it is 100% water resistant instead of getting an ugly canopy that will spoil the look of my x terrain. Please please consider doing a follow up video, thanks so much. 👍🏼
@jasonwebber9811 Жыл бұрын
Great video as always, looks like a well made bit of kit! I thought I passed this beast heading up north in the Bruce highway last week
@VideoShowMeHow Жыл бұрын
Yeah top notch bit of kit, very well made and 100% made in Australia too!
@andyneilmcg Жыл бұрын
Also we found out after a certain amount of time it is used. I believe like 500 times. The light bar will start flashing. Indicating the roller shutter needs to be serviced. Like cleaned and lubed up. Then reset the service period.
@VideoShowMeHow Жыл бұрын
Yep also if getting too dirty in canister etc. Pretty cool
@lowrider15in11 күн бұрын
Hi Adam, I wanted to ask if the central locking patch cable connects to the same plug you used for the tailgate central locking, or if they have different connectors. Or maybe you need to splice the Y connector? As I couldn’t recognise the tailgate plug from your previous video. I'm planning to install a canopy and tailgate lock so the process should be fairly similar I guess. TIA
@roocrew86 Жыл бұрын
good video mate, id be keen on this but I wanna keep the rear wing
@bushmagpie3312 Жыл бұрын
Great instal video again Adam. I was looking at rear rack but could not locate one that hinges forward so you can access the front & mid of the tray. As you have lots of contact with manufactures is there a rear rack which can hinge? Looking forward to long range tank instal. There is ones which fit above and to side of the spare wheel now.
@glenncross3196 Жыл бұрын
Great content as always, looks like a nice piece of kit, can you advise if the two rails for bolt on's are in the same position as the OEM (ie same distance apart) and what load rating does it have ? Thanks Adam
@friskym8559 Жыл бұрын
What’s the rough price? They don’t have it listed on website.
@TravellingOutThere Жыл бұрын
Hey mate, how has this been? How’s the water resistance and such? Do you notice it getting stuck and not working with the lubricant? Do you get any water into your tub at all??
@VideoShowMeHow Жыл бұрын
So far so good, love the electric and particularly the app access (opening or closing without getting out is awesome), water ingress is next to nothing, maybe a couple a drops in heavy rain but better than the factory one by a mile, I give it a 'service' once a month which basically just means blowing out the track if there's any crud in there and a quick squirt of silicone type lubricant. Happy with it.
@bryceapap1384 Жыл бұрын
Hey Adam quick question mate, what mount did you use for your UHF antenna that fit on the Roll r covers running track?
@Andrew-ym2syАй бұрын
Have one installed on my 2024 hilux gr sport. Where the water grommet is at the back water builds up and comes through the tub liner. The inside is completely filled with water?
@VideoShowMeHowАй бұрын
Worth contacting HSP for help, is the drain hose twisted or anything?
@marc3152 Жыл бұрын
Great video!!! Do you get any water in the tray when it rains?
@VideoShowMeHow Жыл бұрын
No so far so good!
@MissLeeMusic Жыл бұрын
Hi Adam, thank you very much for this video. I would love for you to test the integrity of the rain getting in. I would much prefer this optionif it is 100% water resistant instead of getting an ugly canopy that will spoil the look of my x terrain. Please please consider doing a follow up video, thanks so much.
@anthony2682 Жыл бұрын
@@MissLeeMusic agreed, only thing I hate about my dmax is the water ingress in the tub, I’ve sealed some spots but still get water in
@porkchopexpress20567 ай бұрын
Hey mate, great video. does the ruler affect the seal between the tray and the roller cover?
@VideoShowMeHow7 ай бұрын
How do you mean?
@porkchopexpress20567 ай бұрын
@@VideoShowMeHow sorry mate autocorrect, raptor liner. Does any water get between the raptor liner and the roller seal ?
@VideoShowMeHow7 ай бұрын
Ahhh. No it was all good
@porkchopexpress20567 ай бұрын
@@VideoShowMeHow ok great, thanks for the reply
@Andrew-ym2syАй бұрын
Whatever drainage holes are under the tub liner ant handle the amount of water. I thought it should be drilled through the actual tub?
@VideoShowMeHowАй бұрын
@@Andrew-ym2sy for the drainage? The factory drainage doesn't go anywhere, literally just pipe under the liner in the DMAX/BT. The two exit hoses for this go out the existing slots in the front of the tub, HEAPS more capacity 👍
@Andrew-ym2syАй бұрын
@@VideoShowMeHow mine is flooding. The guys installed it yesterday and I can see two hoses from the back going into the tub liner. The front ones are good
@Andrew-ym2syАй бұрын
@@VideoShowMeHow just put the hose an can see so much water filling up inside
@VideoShowMeHowАй бұрын
Hmm something doesn't sound right mate, does the rear drains connect to the outside? You can see towards the end of the vid where I had connected mine into, they literally drain out the tub holes
@Andrew-ym2syАй бұрын
@@VideoShowMeHow I am see water coming under the car but after a while it’s starts to seep through tub. Yep no idea what happening but should t be that much water
@faialamo1476 Жыл бұрын
Hello mate! Would you please comment on why not going with the Mountain Top Evo roller
@VideoShowMeHow Жыл бұрын
HSP is the better product IMO
@Machsattack Жыл бұрын
Quick question. Can the sailplane be removed while still leaving the standard roller cover in place?
@VideoShowMeHow Жыл бұрын
Not easily no
@beachboys4x4perth94 Жыл бұрын
why the push button is not in the th driver side easy to access otherwise need to go around to push thr button 😊
@VideoShowMeHow11 ай бұрын
Links to keyfob as well, so just need to double tap the unlock and open presto (or via app)
@ahmadelkheir1392 Жыл бұрын
Hey mate is it possible to do the install and still re install the stock sail plane?
@VideoShowMeHow Жыл бұрын
No unfortunately, the factory sailplain is connected to the standard roller
@anthonysalafia7017 Жыл бұрын
Cool 😎
@cowboyjr51167 ай бұрын
My question is: waterproof?
@VideoShowMeHow6 ай бұрын
Not waterproof, in saying that it did an excellent job of keeping the water out, better than the factory cover
@brendan6948 Жыл бұрын
Is there any difference in clearance under the roller housing compared to standard?
@VideoShowMeHow Жыл бұрын
Yes it's about 30% smaller
@JeffreyWalder Жыл бұрын
Does that have the the long black metal under the roller like the oem one or do you have more height when the roller shuts
@VideoShowMeHow Жыл бұрын
Yep have more height, the bar at the end is prob half the factory one in height
@JeffreyWalder Жыл бұрын
@VideoShowMeHow cause i bought a my coolman 85 litre which is 47 cm in height and tub 49 cms but its hitting the top of the fridge cause of that long metal bar under the roller.. Thanks adam
@VideoShowMeHow Жыл бұрын
Have you got the tub liner in?
@JeffreyWalder Жыл бұрын
Yes adam I tryed removing the corner pieces off the fridge but still hits only just
@VideoShowMeHow Жыл бұрын
Yeah the liner chews up some height, 20-30 mm.. in my raptor liner vid near the start I show just how much space you lose
@thepeacefultemple1434 Жыл бұрын
A shame it's not actually waterproof. It sounds like it should be but the reality is very different. I quote from the HSP Customer Relations Manager "we have never claimed or advertised our product to be waterproof." How very disappointing.