Thank you Atom Bomb Body for being such a valuable creator in the VR industry 💙
@Ttreal-j2r17 сағат бұрын
Need help setting this up, been back and forth since Christmas!!
@sugoi1581Ай бұрын
lucky to find this as I decide to dig up the trackers and use them again got stuck on the space calibrator part only to see it right there in my face the whole time xd
@gonsodany11 күн бұрын
a tip while mapping, you dont really "move it around" to fill the ring, but the correct and better way is to move the tracker in the 4 directions (twice for each direction). For example left, right, left right, then up down, up, down. You will see that each time you turn it into one of the directions (left, right, up, down) it will fill that side a little more, takes 2 times to fill a side
@SynthRider13 күн бұрын
I cover the trackers with a blanket, will it interfere with the trackers?
@BraveryTheVA3 күн бұрын
Hello, Hi, when im doing the calibration with the controller, it just says tracking lost when i press the power button could somebody help me with that please?
@silverfireVRgaming2 ай бұрын
Don't the Quest devices provide upper body tracking (Quest 2 is estimated, but still provided)? I know Virtual desktop allows that info to be passed through, and I believe Steam is going to be allowing that plus hand tracking through soon. Just mentioning because that plus the three tracker would give you all you need for full body tracking, and might have been good to point out in the video. That said, good video, and informative!
@dejhabashton230129 күн бұрын
I unfortunately am bot able to get these set yo every time i turn vive on they will not sync and i haveto do the whole process over as well as in the space calibration it takes almost an hour to even get them recognized and i lose tracking almost immediately please help i don't know what im doing wrong ive messed with thos for a week now
@predatorking300c6Күн бұрын
Every time I click the power button on my tracker, it says lost tracker
@kalebjensen33212 ай бұрын
"Little patience" ive been messing with mine for probably 4 hours and they constantly lose tracking and the map making process refuses to work. The first time i tried setting them up it actually worked fine until i got to the steamvr part where they were like 15 feet below me and the figure 8 process didnt even go up a single percentage. Idk if its user error or what but these might be the worst purchase ever if i cant get them to work.
@AtomBombBody2 ай бұрын
You might have to re-do the room setup part (the kneeling and turning) or what I do when the trackers end in an ERROR after the figure 8 part I just restart SteamVR and do the calibration and that seems to get them in the proper place again. Not an ideal solution and it is frustrating, but hopefully one of those works for you!
@gloomsoulsАй бұрын
How did it go? You get it to work?
@kalebjensen3321Ай бұрын
@ yes I got them to work I just didn’t have sufficient lighting after i fixed the lighting issue they work almost flawlessly besides how recently one of the leg trackers moves into a different position and recalibrating dousnt do anything only unpairing it then pairing again. Seems like a bug tho and not something wrong with the actual tracker.
@lexmanbrother123913 күн бұрын
THIS CAN HELP SETTING UP YOUR TRACKER ---GET A LONG SCREW THAT FIT, TAPE THE SCREW HEAD ON A STICK, SCREW THE TRACKER ON THE STICK TO HELP YOU SCAN THE FLOOR, SO YOU DONT HAVE TO BENT DOWN ON THE FLOOR. THAT SHOULD MAKE SCANNING A LOT EASEAER. 0VER 250 POUNDS, CAN'T BEND THAT LOW ON THE FLOOR FOR THAT LONG.
@bigpappa_14 күн бұрын
I ended up selling my set I bout them as soon as they released the whole possess of using them was so buggy. I went back to using the Slime VR trackers 10 point tracking
@shotofinternetАй бұрын
2 Questions: 1. Do i have to redo the Playspace scanning sometimes even if i move no furniture? 2. Do i have to open the Vive Software all the time or is SteamVR just ok after calibration?
@AtomBombBodyАй бұрын
1. You don't need to redo the playspace scanning thing unless you notice things are seriously off about your trackers, and the tracker calibration (figure 8 setup) dosent seem to fix things. 2. Yes, the Vive app must be running alongside/with SteamVR
@moncimoov23 күн бұрын
what is the minimum play area for this?
@AtomBombBody22 күн бұрын
The minimum recommended space is 2 m x 1.5 m (6 ft 6 in x 5 ft)
@ILYDAN922 ай бұрын
Thank you very much, it is a very clear tutorial and helps with the configuration, one question, what is the name of the map on which you appear at the beginning of the video in VRchat, thank you.
Hi, great video!! My question is if i ad a 4th tracker to the headset and use active calibration will it work. I have used it before with regular trackers. Im waiting for my 4 ultimate tracker to arrive today and see if it works.
@AtomBombBody2 ай бұрын
What do you mean by 'active' calibration?
@bluebell12 ай бұрын
Great video! I love how you detail your tutorials! One question. How did you get your Meta avatar to look so good. I was forced to update to the new Meta avatars and I hate them. No matter what I do, it doesn’t look like me!
@AtomBombBody2 ай бұрын
The one in the video is actually a Ready Player Me avatar! readyplayer.me/
@victoriabryant78329 күн бұрын
I’m very confused. What USB are we supposed to connect to the vive trackers?? Do we need to have a USB that converts to the USB C? I only have one USB C port in my PC. I can’t unplug the adapter or it’ll start all over. Very confusing.
@victoriabryant78329 күн бұрын
This is for the update part-
@victoriabryant78329 күн бұрын
Update! I used my link cable as a usb c converter. Just in case anyone needed this info (:
@AtomBombBody29 күн бұрын
@@victoriabryant783 Oh yay, glad you were able to figure this out. If it helps I also have a powered USB hub which helps because I'm always running out of ports
@novaximeno79529 күн бұрын
would this also work for Vive Trackers 3.0s?
@AtomBombBody29 күн бұрын
No, because those trackers need base stations. I do find that as long as you are OK with putting holes in your walls, base stations tracked trackers are a lot more reliable and easier to setup.
@DaShomuraiАй бұрын
Can't get the figure 8 thing to start working. How do I fix that?
@AtomBombBodyАй бұрын
Is the icon not appearing in your SteamVR dashboard?
@victoriabryant78329 күн бұрын
I’m running into another issue with the calibration (The last step). It won’t let me do the figure 8. It keeps saying “Hold tracker and controller securely” I have the camera facing the dongle and I’m holding them both tightly but it’s still not letting me do the figure 8.
@AtomBombBody29 күн бұрын
Once you have them held, did you press the power button once? IIRC that will get you to the next step of actually doing the figure 8
@victoriabryant78329 күн бұрын
@@AtomBombBodyI was able to get it to work! I had to reset everything and uninstall steam vr but I got it to work thankfully and am now rocking in full body. Thank you for the video! Would’ve never been able to set these up without ya!
@AtomBombBody29 күн бұрын
@@victoriabryant783vr stuff can be so annoying sometimes... but congrats on getting everything set up!
@BaxornVR2 ай бұрын
Do you still have to do the figure 8 every time?
@AtomBombBody2 ай бұрын
Its good practice to, but you just need to do it with one tracker (vs all 3 or more)
@stingierelf85Ай бұрын
i have a quest 3s and when i went to manage add on's i don't see the options you see but all i see is game pad support and business streaming am i doing something wrong?
@AtomBombBodyАй бұрын
Go into the Vive Hub settings, then 'about' and navigate to the 'Vive Ultimate tracker' section and click 'install'. If you do not see that you may have to opt in to the beta program under 'advanced'
@stingierelf8516 күн бұрын
@@AtomBombBody it wont install sadly im not sure whats happening i can click it and itll load half way then itll stop and disapear
@AtomBombBody14 күн бұрын
@@stingierelf85 Very weird, I recommend maybe joining the Vive Discord and getting some support there! discord.com/invite/viverse
@stingierelf854 күн бұрын
@@AtomBombBody i have it download now but still wont show up on steam vr im sorry for bothering you about this
@AtomBombBody2 күн бұрын
@@stingierelf85 It dosen't appear in addons? Does the pair new or start setup options appear in the Vive Hub?
@technikchegger72282 ай бұрын
Thank you, you explained it very well.
@Hellozzzzzzz9942 ай бұрын
i have one problem the quest 2 is a bit different to the quest 3 so im sadly a bit loosed to find the vive ultimate traker settings on my quest pc
@AtomBombBody2 ай бұрын
@@Hellozzzzzzz994 how/what are you using to connect your quest to your PC?
@Hellozzzzzzz9942 ай бұрын
@@AtomBombBody cable
@Hellozzzzzzz9942 ай бұрын
dose this work on quest 2? if you can can you make a vid on quest 2???
@AtomBombBody2 ай бұрын
@@Hellozzzzzzz994 As long as you can connect your Quest to the PC (link cable, airlink, Steamlink, Virtual Desktop whatever) it will work
@Hellozzzzzzz9942 ай бұрын
@AtomBombBody okay love thanks for ur help tho
@toasterkolin99512 ай бұрын
Perfect, concise, informative, well edited video, the avatars kinda suck tho lol.
@AtomBombBody2 ай бұрын
Ugh I do need a better one
@raminagrobiz92332 ай бұрын
you are pretty atom bomb i like your style
@gamingwithwolves56152 ай бұрын
Ok I got a complicated one for ya and I'm guessing the easy answer is probably no but.....I use Shadow PC i do not own a physical pc so could I use these still or no?
@AtomBombBody2 ай бұрын
No because you would need to physically attach a dongle to your PC to have it "see" the trackers. That is an interesting one though. Does it work well for VR in general?
@gamingwithwolves56152 ай бұрын
@AtomBombBody yeah works well enough to get full pcvr. Most things work so far such as standable, ovr settings, etc
@hexshadow6647Ай бұрын
@@gamingwithwolves5615trackers that require a cable to be plugged in a pc when a majority of all controllers are Bluetooth and work just fine. This not sound odd and halfassed to nobody else? Cmon now reducing cable management is key especially for those who use alot of accessories in their pc.
@baconman60483 күн бұрын
unfortunately vive cant make a product so linking them to the controllers with the big sweeps you are doing will not work as as soon as it looses sight of the device it losses tracking
@Paintingsvr2 ай бұрын
Quest pro não?
@AtomBombBody2 ай бұрын
Quest Pro tambien
@jaggerthejagyt24 күн бұрын
Should i get Base Stations for the Quest 3?
@AtomBombBody23 күн бұрын
You don't need them for the ultimate trackers, only for the 2.0 or 3.0 trackers. But if you are or think you will be a hardcore tracker user, base stations still are the best in terms of tracking quality.
@Dkatz232 ай бұрын
Thank you for this info !
@kenpomonkey2 ай бұрын
Great tutorial!
@SyafireАй бұрын
Thank you so much!
@spidermonkeynr12 ай бұрын
Great info. Also love that dress
@andricstudioyt177919 күн бұрын
My trackers slowly drift over the span of 10 minutes
@hexshadow6647Ай бұрын
Yeah those idiots need to fix that crashing problem immediately. As well as the lack of efficiency with all this unecessary repetitive calibrating every however many seconds. Turns off other wireless devices? Yeah that can't stand, pc accessories could be affected and fuck shit up while your playing. They did not do well at all with this piece of garbage, having to spend 1 or 2 minutes spinning in circles dancing like some primate shaking a tracker in your hand is ridiculous. Even the quest 3 can just look in a direction and figure shit out, it's near 2025 this technology is making the people developing it look really stupid.
@MurderdronesdestinationU4 күн бұрын
i had to slow video speed down. you talk way too fast for an instructional video
@AwesomeRepixАй бұрын
Man, they make so much junk for these headsets now, holy heck.