Great video. I'm about to do this mod this weekend. It's funny, I was just looking at the fittings earlier and then your link sent me to the same ones. lol. Can you tell me what torque specs you did for the intake bolts for the LT2?
@demonworksmotorsports Жыл бұрын
Thanks ! 44 In lbs then 89 in lbs. Not listed is the fitting in the back, That is a GPI one that allows you to reuse the factory vacuum line.
@adammeder5452 Жыл бұрын
@@demonworksmotorsports I just ordered it from them. I have an order on its way from Phastek, but they use a completely different fitting. One that requires me to cut mt stock tubing up. No thank you. So I wasted a little money, but that isn't the first time I've done that on my car.
@adammeder5452 Жыл бұрын
@@demonworksmotorsports Also, what was the size of the tap? Can you throw a link up?
@chrisx20152 ай бұрын
I don’t know how you are using the rotofab intake tube cause of the angle. I ended up using the factory intake tube on mine and works perfect.
@bobbywilliams18239 ай бұрын
Man would you mind telling what part number that 90° Dorman elbow on the front of the intake is? I've been looking all over for that. I have vacuum hose plugged straight into it and it's always bothered me
@demonworksmotorsports9 ай бұрын
this one right here - amzn.to/3TPfWHS
@bobbywilliams18239 ай бұрын
Thank you very much my friend 🙏
@jaredgonzalez53172 ай бұрын
@@bobbywilliams1823 hello! I just wanted to know if you had a link or part number for the silicone hose you put on the doorman elbows? Mine is making a high pitch noise and looks like it’s sucking in so I’d like to replace it. Thank you in advance!
@vinceoneal3122 күн бұрын
I cant find the GPI fitting, would you happen to know the part # or a link to it?
Hi do you have for sale the C8 intake manifold cover ?? let me know great video thanks
@demonworksmotorsports10 ай бұрын
I do not, sorry.
@davidprice171916 күн бұрын
I bought a nice plastic black carbon fibre look cover with no Corvette lettering from Ebay. $170-00 to my door (Canadian $ )..looks great...fits nice.
@Kastra7073 ай бұрын
Put the cover back on
@demonworksmotorsports2 ай бұрын
nah, it's not a corvette
@thatrealcarguy Жыл бұрын
Wait until you go MSD. You will wish you didn't waste your time and money on the LT2. Cause that is how I felt... Only had LT2 on for about 2 months before going to MSD and 103mm TB.
@mayosturgell447410 ай бұрын
Hey did you have your car tuned for the LT2 intake? I have an MSD & a 103mm TB. I also have a RotoFab cai that’s not installed on the car. Do I need to have the car tuned in order to install this stuff?
@Bens1LE10 ай бұрын
Tune it after. @@mayosturgell4474
@Bens1LE10 ай бұрын
I would personally rather have the LT2 intake manifold with LT5 95mm TB for less than $700. OEM Parts mind you. MSD manifold is over $1K and 103mm TB depending on brand is $500-$700. After taxes that's definitely over $2K. Talk about wasting money.
@mayosturgell44749 ай бұрын
@@Bens1LE well I bought my MSD intake off a good friend and the TB is new.
@StevenMcCartАй бұрын
do you need to disconnect the battery when installing this
@demonworksmotorsports25 күн бұрын
Always safest to.
@tgigaming82808 ай бұрын
What did you use to seal the back of the intake manifold? I couldn’t hear
@demonworksmotorsports5 ай бұрын
teflon tape.
@dontrellwalker73153 ай бұрын
Did you tune the car?
@demonworksmotorsports2 ай бұрын
No, stock tune.
@mfrfpv90794 ай бұрын
Locktite eats plastic 😮
@demonworksmotorsports4 ай бұрын
Per loctite, there is a chance of cracking from loctite when used on thermoplastics and that is from the loctite expanding slightly when dried. It is my understanding the intake manifold is actually polypropylene and does not have the same risk. I appreciate the concern, others can opt to use a different product if they feel the need.
@blackice74089 ай бұрын
9:38 it lowkey sounds somewhat like a diesel
@demonworksmotorsports9 ай бұрын
It does, always interesting what the camera will pickup more of with the mic 🎙️
@gbass732811 ай бұрын
Yes it's cheaper but not as good as an MSD. With all that work just spend the money.
@demonworksmotorsports11 ай бұрын
it's really not much work, but we can all do what makes us happy.
@jonburk825611 ай бұрын
@@demonworksmotorsports I love my LT2 Intake. Was a cheap mod for good gains. Most people say, " Oh just go MSD. " but the main difference is price. Price to performance is always good too, and you can always upgrade to a bigger and stronger manifold down the road if you truly wish. For me however, my car is pushing 482 whp with my current setup and it's plenty of fun for the street and track days.
@grantnumrich971910 ай бұрын
keep you ten speed with your automatic controls on it! the system is horrible! I will stick to a manual which I have which runs clear and clean! thank you
@demonworksmotorsports10 ай бұрын
Wow, from left field on that one.... 2 ZL1 1LE's with manuals and decided to give the A10 a try. Enjoy your Manual, we can all be car people together...