HUGE Progress On Our K-Swapped Jet Boat! (Ready To Jump Logs)

[@boostedboiz]

New Bespoke Post subscribers get 20% off their first box - go to bespokepost.com/boost20 and enter code BOOST20 at checkout. Thanks to Bespoke Post for sponsoring!

[@kinn1647]

Happy birthday for the other day 🖖🖖🍺🍺

[@lobsterbisque7567]

Happy Birthday, Brotha!! Awesome build

[@ericteipen]

Need to put some of those stick-on grip strips on the bow so you don't bust your ass walking on it.

[@chicagovasko]

Happy birthday Kyle.

[@ProperMethodz]

Huge Happy Birthday man :)

[@threedirty5455]

Pretty cool to see Wyatt take over for a bit! Definitely a Boosted Boi for lyfe

[@garciagarcia930]

“Taking my trainer on a boat ride” lol

[@koby4284]

PLEASE

[@anthonyestevez118]

This will be a must!

[@scioli700]

Taking my trainer on a ride on Kyle

[@nightcrawlerc9842]

😂

[@Goat-vy2bi]

In a bikini oh yes. Alot of cameras that shoot so you get all the views. Peace

[@isthismyfault]

I’m knocking Kyle by any means but Wyatt’s attention to the small things has made this channel so much better. He is killing it and Kyle and him really have something special going on right now. Between the Florida move and the Wyatt partnership, Kyle has made some great decisions over the past few years.

[@Matty.Hill_87]

@@mayshack exactly that mate

[@chestermcgillicuddy4368]

It's a smart business move for sure. Good dudes!

[@tjcmoto5484]

Having a good team is clutch. Just look at the success of Cletus and the team he has.

[@andwooo9460]

Good people with great work ethics, and are like minded = a good recipe for success.

[@joshbertrand]

Oh he kills it. But I bet he has some forearm burns after all that welding.

[@dcalsv02]

Bow = front of boat Stern = back of boat Starboard = Right side Port = Left side

[@stykytte]

In the company of royalty you might "BOW over FORWARD, or get a STERN reprimand BACK", and if you're asking if there was any of a specific alcoholic beverage remaining you might ask "is there any RED PORT LEFT over?" which gives you the colour of the running light on that is usually on the Port or Left side of a marine or air vehicle. .. Green/Starboard/Right I never heard one for but it's easy to just think the opposite of Red Port Left.

[@miatadawg]

@@stykytte also, port and left are 4 letter words, ports also red as wine goes

[@mx5_enigma308]

Boat hood= front of boat Boat trunk =back of boat

[@crxh22honda37]

Hood works for me lol

[@fauxque5057]

I got a laugh out of hood. Bow and Stern are the easy ones. Port and Starboard I never can remember

[@toddmoyer225]

Wyatt absolutely kills it. Super hard working dude.

[@trophbrwntrouthunter]

I have that stuff on my river pro jet, grind the front edges to taper up to the boat. The 90* angle on the front edge becomes a problem over time, once that stuff starts to peel, it’s over. Maybe you’ll have more luck, I replace it every winter. Nice work boys!!

[@93z32]

this deserves some likes so they see it

[@risingstar1309]

Yeah I’m thinking they’re gonna come back and add the chamfer. But if they weren’t maybe they sure consider that!

[@stoker20]

I'd want to poly weld the keel to bow gaposis to keep out the H2o PSI???

[@trophbrwntrouthunter]

Can’t wait to see how it runs!

[@eddominates]

me and wyatt have a very similar process when it comes to custom stuff 1. Stare at it for a while 2. Slap it together, Stare some more 3. Take it apart, scratch head 4. Bust out the grinder 5. Now it fits

[@MattiasFriman93]

i think that is every mans process. haha.

[@happyhappyjeepjeep725]

@@MattiasFriman93 true story lol

[@Iamdesignproducts]

So far that's how I've gotten my Miata to where it is haha

[@TheOnlyKontrol]

With 580 comments on KZbin my guy you ain’t building no custom stuff. Maybe just customizing your comments.

[@eddominates]

@@TheOnlyKontrol the fuck are you all salty about

[@hpa101]

Enjoy the log jumping! Jet boating is epic and the unofficial national sport here in New Zealand 😂 - Taz.

[@birdness]

Fancy seeing you here.

[@ryubiggie]

Love your guys content! I listen to the podcast and don’t miss an episode.

[@rynodeweerdt6729]

That's a boat load of progress!

[@Benjamin-t5l]

I enjoyed this one

[@esqueue]

😄

[@ChrisBeevor0511]

Ayyyyyyyy 🤪

[@Jasta315]

You should have converted the filler neck hole into a blower motor outlet to clear gas fumes from engine compartment once cover is on. Gas fumes and enclosed compartments are no joke!

[@rexrunner]

Needs 2. One in one out

[@chickenfordinner2093]

or for the bilge pump they have not added yet

[@stoker20]

I think it's required for any safety inspection. Any sealed engine compartment.

[@stoker20]

They need a spark arrestor not an air filter. They're not running that boat down a dirt road.

[@SloppyMechanics]

if it looks straight, it is straight -jimmy diresta

[@alexmanning8710]

Y 'all are some mad dogs!!! Awesome to see Wyatt use his mad skills on the boat! Can't wait to see the truck come alive! Happy Birthday Kyle!!!!!!!!!!!

[@eddie_built]

Definitely loved seeing Wyatt pick up the torch while the boss was away and running with it. Did a really good job!

[@gt1man931]

Kyle: Do not let Wyatt get away. Do whatever it takes to keep him happy.

[@stephencarter1442]

Make sure you add a blower its a uscg requirement to evacuate fumes. You'll get dinged if you don't. My two cents. Looking awesome Thanks for sharing.

[@jcbrena]

thumbs up for the fact that you guys worked till 1:33am, uploaded the same day, and had to get up early too. crazy work guys

[@vintagetweed]

Love it. Haha "the hood" aka bow. Great progress boys. Huge shout out to Wyatt for letting Kyle enjoy his birthday and put in the grind to get it done. Really impressed with the build quality on this one. Y'all have come a long way 👏 👏

[@MrBistrochef]

The pointy end is called the bow. The window allows access to the foredeck. Good luck on the water y'all, boat looks great

[@Stratigizing]

the jetboats are honestly almost cooler than some of the cars😂😂, not to take away from how badass the cars are the little jetboats are just so fun and the videos are always 10/10!!! keep up the great work guys! yall are killin it!

[@nickwalston1322]

I think they are actually paying way more attention to detail. Wyatt is killing it with him

[@Smokkedandslammed]

I think Cletus and BoostedBoiz are turning all us car nuts into jet boat nuts hahaha

[@nickwalston1322]

@@Smokkedandslammed yes. This too

[@gnarkiller]

This boat is interesting because of the engine and doing custom work. Jet boat content is pretty lame tbh. Maybe it's because I grew up on the lakes so it's not really that exciting

[@castanza128]

@13:45 they have a dwarf friend to do all of the tight spaces work. He just slid right in there like it was nothing. That was pretty awesome to see a disadvantage become an advantage. Dude was jacked, too. LOL

[@noahplanitz5296]

Anyone else’s face light up soon as they seen Wyatt taking over? Definitely a refresher forsure. And cannot wait to see more of that go fast truck build 😎😎

[@juliarose8593]

I know still workin on it, but you might wanna think about a bimin top, with the windshield and the four seats you might like some shade on the water. I love how it is a miss mash of parts. Maybe even put a pink leopard rocker cover on it.

[@kadengineering8983]

Love those drill tap's!! Best invention! The trick not to break them is to use high speed to drill and go down to low speed for tapping. Make sure to use cut/tap fluid. Air blow between every hole to ensure a good clean thread

[@royalarmyworks5446]

The kraftwerks supercharger intake manifold would probably fit perfect 🤔

[@sleighridefishing9027]

I can't wait to see a snail in this boat! Going to be well worth the wait!

[@ambirbtruckdriver]

Witt, I’m glad he hired you so we actually get to see your stuff now. I followed your channel for years and you do good work, don’t forget it

[@stevegreenaway9527]

Looks sick! A supercharger would look at home on that engine 🙌 also don't forget the engine bay ventilation.....we don't want any explosions 🤣

[@dustyc324]

blower needs to be added when that cover goes on.

[@NorwayVFX]

A supercharger would actually be a great idea, compared to a turbo. Way less heat generated and the water cooled exhaust would be easier to do.

[@Pieter-vdP]

Happy belated birthday Kyle! On a side note… I think we all can agree on a Twisted Tea wrap design for the yet boat!

[@alexdeaver4823]

Looking sweet. When you put in the rear seat/engine cover make sure you get some ventilation in there too if you haven't provisioned for that yet.

[@simonelchami5151]

Wyatt has been a beast as long as I’ve been watching the channel. Love that hes around 24/7 now

[@Tyler27B]

Awesome work bois and friends! Throw some rubber sealant for a fridge or freezer etc at the front window to prevent rattling and wear and tear on the latch system you use 👍🏼 can’t wait to see her progress

[@kbar150]

Don't forget fire extinguisher mount , bilge pumps, and definitely an engine vent fan. 3 things that can make or break a boat. And Happy belated Birthday

[@coleedits1288]

I bet small homie is the god of working on Hondas. Imagine him being a mechanic on heavy equiptment… he would be top of the line

[@eg50]

Wyatt needs another bonus after grinding so hard in the jet boat. Definitely a good dude and your lucky to have him with you. As an employer myself I know you need to take care of good employees. Keep Killin it boiz

[@accordinglyryan]

Echoing the other comments, Wyatt is the best thing to ever happen to this channel. Dude's a g

[@johnnymaripacheco6961]

Wyatt killed it on the jet boat 🚢 💪💪 Awesome job bud. Keep on the good work Boyz.

[@andre14141000]

We ALL gotta put some respect on Wyatt.He gets shit done and even picks up the camera 💯💯💯 salute boostedbois

[@noragoodwater9727]

Don't forget the girls watch you too! The boat is looking awesome! Good job you two!

[@jerryrossiter2204]

The front of the boat is the Bow. Also, install a “oh shit bar” for the front seat passenger

[@The_DrivingAddict]

When people think KZbin is easy, but then at some point get enlightened by all the behind-the-scenes stuff and editing. Boiz putting in the hours. Jetboat looking good, team! When you showed the seats picture, all I imagined was the turbo air filter poking out under the cup holders; I'm sure you'll find a much better spot for turbo intake.

[@reddog5153]

Yeah you can tell that look how many kyle puts out compared to Emilio and Charlie

[@blackdragonx1186]

technically you don't have to run a filter. out on the water the dust is minimal, most boats don't use them. same as your snowblowers back home in CO

[@dustyc324]

You need a blower fan for the engine compartment. Should have left that hole for a vent. the battery really should be moved away from the fuel. in case of something coming loose or shorting, it would be best to be on the opposite side of the fuel. Oh and your cockpit is on the wring side. That's kinda cool though. Keep it a car guy's boat.

[@joedegre9807]

u have the best friend of a lifetime youre lucky to have him !! fun to watch

[@poenaification]

Hope Wyatt gets shown the love for the work he puts in damn son that guy is a machine,

[@breakupgoogle]

hats off to good friends helping out.

[@jeffreis5194]

So glad y'all hit it off with cleeter. Would love to see y'all do a race week in the van with all 3 of you. Or maybe y'all could do the musketball rally

[@Brutalford]

Hey Kyle the hood is called a bow (bow-el) looks amazing and I looked into the kits that's insane for the amount of work that's required...I'm gonna find a inboard boat to put a engine in and go from there

[@svr27rr87]

Well happy birthday kyle..& i would add a custom hood scoop & cut aof the back seat engine covee to fit a hood scoop on to be able to get some freash air to the engine & air intake system..so that engine can breathe some cooler air cause it gonna get hotter with that engine being cover up m8ght even want to install a nice mini fan like what they use on trans cooler to help that engine run cooler..

[@user-pwfus]

That rear seat is wicked and the front window split door love it as usual you guys went over and beyond.

[@joellabrecque5696]

Great work Wyatt, thanks for grabbing the camera and make work happen! I think we all appreciate it 🤘🏼

[@trentdeemer6404]

Wyatt taking over is a huge step. Absolutely love seeing you on the channel dude

[@bryduhbikeguy]

Glad you were able to celebrate your Birthday Kyle.Hope there was allot of fun involved too."Skippy" is looking ship-shape,and ready to bounce over the waves.Enjoy!

[@chriswatson9705]

Happy birthday Kyle.....great job Wyatt....you both keep killing it keep it up

[@Andrew-vd2ko]

Every boat operator should know the following terms and definitions. Bow : Front of a boat. (Not Hood) Stern : Rear of a boat. Starboard : Right side of a boat. Port : Left side of a boat. Hull : Body of a boat. Gunwale : Upper edge of boat's side (generally pronounced gunnel) Cleat : Metal fitting on which a rope can be fastened.

[@OGbqze]

You guys are going to be so freaking glad that you took the time to do this thing the right way the first time, especially when you're out on the water RIPPIN!

[@throckmorton1972]

Tapping aluminum is pretty easy have you ever tried using a separate tap after you have a drilled a hole it seems like a lot more work

[@timbuckingham6734]

Nice job on the boat! With the nozzle all the way up you should make some good rooster tails.

[@RiposteThis]

Should do a Jimmy Oakes and use some generic window stripping to put around the cut out for that fuel tech, just to protect the wires.

[@aleknive]

Your results speak for themselves.

[@br549rdr]

Looking awesome. Can’t wait to see the trip with Cleeter.

[@scottpatricio2173]

How about putting some poly on the lower sides just in case of hitting rocks like Cleetus. Enjoy all your builds! Sending some Aloha from Hawaii 🤙🤙

[@dylanhearn4269]

Cletus has the Mountain Dew boat, jackstand Jimmy has the bush light, so that means y’all have to get the twisted tea boat. Or just come up with a bad ass boosted boys wrap‼️🔥‼️🔥‼️💪👌

[@RadDadisRad]

If you use a haltech elite or better, a Gyro sensor and an accelerometer you can program automatic trim functions into your programmer. It’ll automatically trim up and down the boat depending on angle and acceleration.

[@Shadowrally413]

Dude yall are a killer team. Shout out to Ryan putting in the time and the others. Boat is looking so sick.

[@Gr8ValUVinDiesel]

Will you guys have to pull the engine each time to change the oil? I know the actual marine applications require a vacuum pump through the dipstick as they have no drainplug.

[@rexrunner]

If they just run a fitting and hose to the drain plug they can use that like marine applications. I’m a marine tech lol

[@Nebbia_affaraccimiei]

funny u think they change the oil xD

[@tripprogers4814]

Looked like the Poly wasn’t the only thing Wyatt knocked out while his friends were over lol

[@chuckfowler8875]

Kyle you need to get you some shims for that jet foot by the grate so you can dial in the flow of water into your pump it will make all the difference in the world.

[@grantlewis7885]

Best looking jet boat on KZbin. Cant wait for a turbo later.

[@Danger-Dave]

Kyle and Wyatt fixing to get their sea-leg's on! Hood=Bow, Deck-lid=Stern, Left=Port, Right=Starbord.../ I wanna see a Boosted Boiz Skull & Crossbones livery on the K-Boat!

[@jeffreis5194]

It's gotta be a turbo for the skull and rods and Pistons for the crossbones

[@dougberry6886]

Who thinks the gym trainer should get a reaction video in the jet boat? Not trying to get Kyle in trouble. Wyatt could drive even.

[@williamforbes7156]

Good luck guys/gals, looks like you have it sorted. have fun on the water ha.

[@mistymoo5230]

Think wyatt wants this thing done just as much as us all! 4 seats is gonna be good! Another hammock, bowl up to a sand bar with the boys bbq and a lounge in the sun after jumping logs and skiping rocks 100% have to ice tea wrap this thing

[@Epsonblade]

Very happy you moved the tank to the other side. I commented about it a couple videos ago. Nice work!

[@anthonyestevez118]

Well happy birthday Kyle! You guys are killing it!

[@benpowitzky4820]

Happy belated birthday Kyle. Congrats on getting the jet boat finished, besides the turbo. Can't wait to see the next video racing cleetus.

[@kevinssketches]

Wyatt you're killing it my guy! enjoy the water tomorrow

[@LionMayne98]

The jet boat has come a very long ways look really nice and unique boys great job 😤 can’t wait to see the next video ripping it with Cleetus

[@spyder-cq2by]

Well first off happy birthday kyle. Wyatt u and kyle and the boys worked super hard to makesure you got the jetboat done in time congrats cant wait to see the second voyage hope all goes well.

[@Backupnow-gf7wb]

Looking good, can’t wait for the Turbo!!!!! 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥, p/s how does the engine breathe with the back seats in ?????

[@Smokkedandslammed]

Wyatt is such a bad ass. Happy Birthday brotha!! 🤙

[@peppermintnightmare4741]

I dont know why but I put your newest videos on loop when I drift online, great banter. feels like im with the boiz

[@jasonhill390]

Good job guys! Sweet ass boat right there! Can’t wait for the turbo, it’s gonna be rad! Happy birthday brother man!

[@Meatman285]

That hammock entry was legit 👌

[@nickw0tup]

Be safe on the water guys and Happy birthday Kyle

[@thomasnygard2334]

For space on the jet boat would the k24 headafold head be an option? fast spooling compact easy and relatively inexpensive. Just my 02

[@jackweta]

put some aluminum tread either side of boat on trailer for walking on when launching & loading

[@james10739]

With those little tap bit things I always predrill just because it sounds like a good idea I don't need to dull up that bit since tapping the main purpose and I figure rivets would be the play just because I assume they will see rocks and sand if the heads are not usable that could be a problem

[@ripnliptightlines5092]

Get use to that hammock buddy. We want more Tiffany! 😂

[@srt-4-thompson]

Honestly enjoyed Wyatt doing his own video.. least need it once a week!! He explains well and works hard🤟

[@armandopatane5343]

Excellent work Wyatt = love ur work= always said every one needs a Wyatt and a Oscar from B is for B

[@joshmontgomery9488]

Looks amazing guys. Everyone putting the work in to get this ready is awesome.

[@danpeltier1354]

too cool. you and Wyatt kicking ass and working good keep at it .🤑💯👍

[@slowrps13]

Wyatt's just knocking work out like a beast 💪

[@UpTheCreek496]

Kyle, living in Florida you need to get your boating terms down. Such as, on a boat the hood becomes the bow, the trunk area now becomes the stern, you'll get it.

[@shanesmith8757]

happy late birthday Kyle 🎂🤙🏻 The jet boat is coming along nicely she’s a beauty I can’t wait for the TURBO KIT

[@darianwebb666]

Love seeing wit take the hold of the camera and being more apart of the channel ❤️ love the videos bois keep up the great work 🤌🤌💪💪

[@josecaparroso577]

That's brotherhood right there... love your stuff !!

[@TheVevaxel]

U should get a 3dprinter. Its awsome for interior and brackets. Its good for a lot of things

[@DrRob-rt2lf]

Bro the boat stuff is amazing I can’t wait till y’all get some epic footage on these lol to be honest I’m in Jax,FL and we got some fun spots to hit on the jet boats for sure!!!