How To Correctly Wire Up A Kill Switch & CDI On A 2 Stroke Motorized Bicycle. Proper Wiring

How To Correctly Wire Up A Kill Switch & CDI Ignition On A 2 Stroke Motorized Bicycle. Proper wiring.
Wago Connectors
eBay - ebay.us/qLGqdF
Amazon - amzn.to/3NViJt4
NGK Spark Plug
eBay - ebay.us/28UZBO
Amazon - amzn.to/3zpNoe5

[@TheWannabeOutdoorsman]

I'm autistic. The way you explain shit is EXACTLY what I require to understand this stuff. Thank you for your videos and your ways of explaining shit. I appreciate you so much ☺️

[@jimketchum3169]

My autism won't let me puzzle out what CDI stands for, lol. 🤣

[@TheWannabeOutdoorsman]

@@jimketchum3169 😁

[@jimketchum3169]

@@TheWannabeOutdoorsman You don't know either, do ya? 😂

[@TheWannabeOutdoorsman]

@@jimketchum3169 Nope. Thought of Googling it but it wasn't interesting enough 😅 Let's see 🤔 Control Distribution Initiator Critical Diffusion Insulator Conscious Demented Instigator Compliance Direction Investigation 😂

[@TheWannabeOutdoorsman]

Capacitor Discharge Igniter.

[@shaunacottrellolszko3331]

This is great i appreciate the vidoe too. Alot of people are doing this now and it does help to go straight to the phone for information. Please keep it up.

[@melucs1]

Thanks alot hughes for a very simple straightforward explanation!!

[@angele2217]

I had to sub after watching the whole video from start to end bro thanks for this I got a kit from bikeberry and didn’t know how to set this up this was the last step I needed really appreciate the content going to look at what else u have lol 🤘🏾👍🏾

[@PukiukasyahoocoukSamsung]

All day I was thinking how to connect the cables until i find you video ;)Absolutely amazing video;) thank you

[@andrewbucior]

Thank you, sir! Of all the various sources of info out there related to wiring the CDI/kill switch, this video breaks it down in the simplest, easiest terms to understand. Thank you for making this so clear!

[@HughesMotorized]

Glad it helped

[@ifhewenheyj1466]

Thank you, man working on our OCC chopper build helped out a lot

[@HughesMotorized]

Glad I could help

[@nywherebuthere]

Thanks man. The manual was useless. Someone hand drew a picture of wires

[@adamfreeborn2969]

You made my day. Ty ty my man

[@cnccontroller]

Great idea, thanks!

[@richardkeith9490]

Thanks so much was more than helpful

[@iamjaylosh]

You're doing the lord's work

[@jfi-y8o]

The black motor wire connects to the black wire on the CDI (ignition) box. It's the ground wire (negative). The blue wire from the motor connects to the blue wire of the CDI box. It's the positive wire. The throttle wire has 2 little colored wires. You can either connect one of them to the blue wire or both of them, by splicing them together, etc.

[@davidherwald3360]

Thank you been watching a lot of your videos, helps out a lot, first timer , been able to get it running but seems to die, trying figure it out , spark -air fuel been there done that idk what up .

[@HughesMotorized]

Adjust idle? Fouled plug? too much oil in premix? (should be 3.2 oz per gallon)

[@n017kingg7]

Good video

[@jimketchum3169]

Thanks, bud. My clutch thanks you too. Had some bad noise events using the manual shut-off method. 😖 Nice metal during the Samantha Stevens speed-up spell segment, btw. 😝

[@user-vv4fz8jc4j]

This helped me out so much thanks

[@HughesMotorized]

Glad it helped. Momma told me when I was young "No one will ever find ya handsome son. So make sure some will find ya handy"

[@Saltydoglove]

thanks for making the video ^^

[@HughesMotorized]

My pleasure!

[@i-prophetrobertson6444]

Big help 👍🏾👍🏾👍🏾👍🏾👍🏾

[@RJYT2024]

Thanks!

[@Anhel-jv6is]

Thank you so much

[@HughesMotorized]

You're most welcome

[@coreyfellows1945]

Thanks

[@patrickmcquillan3039]

I remember now the white wire is to run a light

[@Championlakers22]

What are those things called again that the wires were connected too

[@patrickmcquillan3039]

Awesome

[@Bobs-yer-uncle]

Digging the videos man but I gotta question Where I want to mount my cdi the wires don't reach is it a good idea to extend the wiring and what kind of wires should one use if so thanks 😀

[@HughesMotorized]

Mount the CDI so the spark plg wire fits and add in 18ga stranded or solid wire. I'll sell you the wire and some solid connectors or you can source yourself. hughesmotorized.com/upgrade-ignition-electrical-connections-motorized-bike/ just email me how much wire you need if you order and I'll hook you up

[@adamandthemotorizedbikes]

It does make sense though, the white wire taking in power. I will Make sure to get rid of that wire. Thank you!

[@RicardoTeixeiraCarromeu]

I use the white wire for the killer switch blue or red will be direct from "cdi" to magneto ... also I use a BPR7HS (no contact with the piston) spark plug with a 0.75mm gap

[@zackperron6090]

I have a BPR6HS is that acceptable?

[@skids4days42]

Hey if you have the white wire to touching the engine can it cause it not to run? Please let me know some helpful tips it only runs when I rivet when I don’t rivet it dies

[@darkdestroyer2837]

white wire is hot. hot and ground no good.

[@Westhelockpicker]

I don't usually use the kill switch but my chain broke once while I was going about 35mph so it's nice to have just in case

[@charleneblack2792]

If you don't have a kill switch, how to you turn it off? I'm not mechanically inclined, so I'm genuinely curious.

[@Westhelockpicker]

@@charleneblack2792 when you stop just squeeze the brake and let the clutch out it'll shut right off. You don't need to squeeze the brake but if you don't the bike will move forward a few inches

[@malek6129]

​@@charleneblack2792he is basically stalling the engine to shut it off

[@smackahoetribe1906]

So this video is Show8ng us how to hook up the Kill switch Well Hoe do we use the Eletric start

[@nywherebuthere]

The white wire is a hot wire if you want to add a headlight.. ground to frame

[@gringoanon4550]

Kill switches will burn out the coil, it would be better to have a toggle switch on the earth or the live wire to stop the circuit.

[@user-lx3mm2se5k]

Hey Jean how much is it starter kit Lego I have a 80cc high performance

[@HughesMotorized]

You have to buy the engine that is made for an electric start

[@machfiver753]

I'd like to add that it is quite possible that the wire colors do not always correspond to how they need to be wired up. I bought 2 new CDI units and a new magneto before I eventually thought about reversing the connections so that blue went to black instead of blue to blue and black to black. After doing that I got spark working. I just assumed that the wires were colored properly from the factory and that it was just my bad luck that I paid for non working parts. And due to the cheapness of them, that they were chinese made, and my experience with buying direct from China that I should expect faulty goods. But the wrong colors were a new one for me. Now my issue is a weak yellow spark that has (lol) to be a bad wire issue causing that problem. So I'm going to replace the entire wiring harness assembly entirely. And solder each connection instead of using Spade terminals etc .. I'm currently trying to discern what guage of wire will work best. Any help on that front would be appreciated. I knew going in that frequent maintenance and replacing various parts would be a regular routine but not the 3 weeks of use then this problem which has frustrated me no end and I've left it sitting now for about a year since it last ran. I've exhausted everything except the replacement wiring after which if that doesn't increase spark strength I only have the magneto magnets left to replace or try yet another seller for a quality CDI magneto setup. I've found no difference between the so called high performance ones with red wiring for the plug other than cost and color. I don't think quality parts are even made at all for these bikes unless the sheer volume of junk part sellers has so dwarfed them that is almost impossible to find one anymore. As I'm sure the bad seller just makes a new account when they've destroyed the reputation of one so much that no one buys anymore.

[@kimpark283]

U get wot u pay for and it sounds like you're too poor to pay for much

[@gasmaskkiller3853]

Also want to add that I'm fixing to start on my bike and motor project here soon,hoping I don't have problems,lol!!I'll be using mine for going into town and fun. I really do wish you good luck on your bike and also don't listen to all those a-holes. What you buy and build is yours!!I wish I could help you sir but I'm way behind on any no how on these things lol!! I'm very new to this. God bless you and yours and good luck

[@user-lx3mm2se5k]

Hey money how I can get the Wiggles

[@HughesMotorized]

kzbin.info/www/bejne/gISyqXt5jJeLorM

[@supersportryder]

Eugene, I do not run a kill switch because i believe shorting a magneto to shut the engine is harmful to the magneto. Am I wrong?

[@HughesMotorized]

I knew I forgot something in the vid. You are good. I don't use one on my daily runner. Just stop the bike an kill the engine.

[@andrewgonzalez4230]

What's the recommended way of killing the engine without using the kill switch? I release the clutch, as smoothly as possible. Is that bad for it?

[@supersportryder]

@@andrewgonzalez4230 Yeah i do it as slow as i could, what could it break? This dude that i like is pluggin connectors that will do the job so much better than stock if you want to use them. I feel I should not have even brought it up here but it does make a neater bike and your magneto does not have to push current up and down those long wires, only direct short wires to cdi.

[@andrewgonzalez4230]

Thank you for the reply.

[@daveharper6951]

Why if you said go ahead cut the white wire why do have there in frost place?

[@HughesMotorized]

These components were sourced from existing products and have several applications

[@WinstonMyers-il5dl]

My motor came with everything connected, except for the Kills switch ., The kill switch has 1 black and 1 blue wire with connecting heads on the wires, but my 4 stroke motor is all covered . I don’t see a cdi or anything and this is my 1st gas motorized anything. I don’t see any wires coming from the motor with the female ends on them to push the wires in.

[@HughesMotorized]

Look at the top right of the engine. You'll see the spark plug wire and just underneath it you'll see a wire. That one can be hooked up to the kill switch. If the wire is connected to a switch, you can use that switch to kill the engine or you can tie that wire to the kill switch (either wire) then the other wire coming back from the switch can be connected to the case on the lower right of the engine. All is required to kill the engine is provide an electrical path of the wire just under the spark wire to the engine case and you'll kill the engine

[@WinstonMyers-il5dl]

I think zi found it , my motor has a off/on switch on the body of the motor. 1 wire is black and the other is yellow, the yellow wire looks like it’s ran to the body of the motor. Did I find it ?

[@HughesMotorized]

@@WinstonMyers-il5dl You found it. All it does is provide a path to the case and shorts out that wire. You can splice a wire to the throttle switch and use either one. Just make sure the switch on the body is set back to on to run

[@WinstonMyers-il5dl]

Thank you for your initial response and Thank you for the helpful instructions, I hooked the kill switch earlier today 🙏🏾

[@MR-Garcia83]

Do i have a Facebook page i have 3 motters i need get help on

[@HughesMotorized]

facebook.com/groups/hughesmotorized/

[@gewizz2]

i have 3 motorized bikes, i have never bothered using the kill switch. i know its fun for kids to have the button, but i prefer the simplicity, plus i suspect that shorting out the spark wire is asking for trouble from the cdi and magneto. you really dont need it anyway.

[@EliWagnon]

So how do you turn the bike off just choke it out or do something else?

[@gewizz2]

@@EliWagnon sometimes i choke it out yes, but usually i stall it, btw the clutch can take loads of slipping, infact the pads don't even wear down in my experience. sometimes i pin it full throttle burnout and stall it that wayto turn it off. have you tried doing a burnout? its fun and challenging, stand over the bike both feet on the floor, hold front brake and try to get rear wheel to spin. its fun!

[@kennyshannon7580]

My motor want fire

[@omararellano6249]

Thank u sir. U explain this is suck a way. It makes it easy for my dumbass.