Huina Attachment's; Yellow Bucket, Ripper Claw & Quick Disconnect

[@jaykay9927]

Thanks for the demo. Saved me from wasting money on one.🤙🏻🏁

[@R.C.A.D.]

😊👍

[@troydorame890]

Thank you for the great demo

[@R.C.A.D.]

My pleasure Troy 😁👍 Thanks for taking the time to check it out.😊🙏

[@Wolverine1228d]

Thank you for the great demo! I was thinking about getting the quick connect/disconnect, but now I think I'll just save my money and stick to swapping out attachments by hand. Thanks again!

[@R.C.A.D.]

My pleasure Wolverine 😊 And you're on the right track with not getting the Quick disconnect,🤔 now that I've used it a little bit, I can honestly say that it's not needed, and it's more cumbersome than it's worth,🙄 😕 You gain a little bit more reach, and a little bit more bucket curl while having it attached, But you lose bucket curl hight,(measuring from the ground to the bottom of the bucket, with the boom raised up all the way, and the bucket curled in) as well as the bucket being closer to the machine,🤔 😕 you have to be careful when you're curling the bucket close to the excavator or else the bucket will get caught up on the tracks.😕 Another bad thing about it, Is the "screw drive" mechanism that actuates the quick disconnect,🤔 Depending on what you're digging in, theirs a strong chance of packing the entire mechanism with dirt,🙄☹️ And it don't work when it's filled with dirt 😂 I ran the Quick disconnect on my 580 for around 3-4 dig sessions, and then I modified the 580's main boom so that it would lift higher, and kinda decided to get rid of the quick disconnect at the same time,😊👍 I was planning on removing before hand, But I kinda wanted to make a "note" of the removal on video, that way people would understand why I removed it, so that people could make up there own mind on wether or not it's worth it,🤔😕 Anyways, I think that the Q.D. is a complete waste of money.😁😂💸💸💸 So Good thinking Brother... 😁👍👍 lol And Much Appreciation for your kindness.😊🤜🤛

[@jdsrcs8061]

Heck yea brother!!! I really like these RC tractors!!! 🤘🤘🤘🤘

[@R.C.A.D.]

😄👍 Me too Juan! 😁 Sorry for the Huina Double feature, But I'm overloaded with video's, and seriously Low on upload Time,🙄 and I was starting to feel overwhelmed with my backlog of video's.😕 My 13 year old Neice, pretty much has full control on the internet throughout the week.🙄 She is, and has been, "Homeschooled" ever since all the C-19 Started,😕 Which has limited me to the weekend, or late at night, for uploading my videos.☹️😭 So today was a Double feature. 😂👍 Lol Thanks for your Awesome Comment, and Much Appreciation as Always for checking out the video my Brother.😁🤜🤛

[@rcrelatedstuff6092]

Been thinking about getting that yellow bucket for a while now. Not too sure it is worth it but it sure looks nice 😀👍 Great and informative video as always 👍

[@R.C.A.D.]

😊👍 Right on! I haven't used the bucket, or even the Excavator as of yet,🙄 "mother nature decided to give us another taste of winter"🥶 But in my downtime, I did a lot of online part's searching,😄 And discovered several ebay sites that were selling the Yellow Bucket, for as low as $30.00 us dollars,🤔 Not bad at that price,🤔👍 For 30 buck's, it's well worth it,😊👍 $60.00+ on the other hand, is definitely Questionable.🤔 I have my 580 bucket on my 1550 at the moment, But I'm seriously thinking about getting another one of the yellow buckets for it.😄👍 I'm also in the market for a one of the Larger Yellow Grading Buckets, and the smaller Trenching bucket too.😁😂👍👍 Lol Thanks for your Awesome Comment & Compliments, and many more for checking out the video Brother.😊🤜🤛

[@martinsrc8752]

would you not go for 580 bucket instead?

[@R.C.A.D.]

🤔😊 or maybe both 😄 Can never have to many buckets,😁 In all honesty, I want the Complete set for both of my Excavator's.🥰

[@martinsrc8752]

@@R.C.A.D. too much is never enough!!

[@R.C.A.D.]

That's what she said 😂 lol

[@satorrotas]

Excellent, very good job, this quick coupler looks really good, well I don't quite understand what you are saying 🙁 because the YT translation does not work, so I will watch your other excavator videos as soon as YT corrects these translation problem 😉 in the meantime have a good and beautiful day James 😊

[@R.C.A.D.]

😁😂👍👍 Right on Pascal, I still Appreciate your efforts Regardless my Brother.😊🙏 P.S. My apologies for the late reply, I've been pretty busy over the last few weeks, and I'm still pretty busy,😕 Which is better than the alternative I suppose.😂👍

[@satorrotas]

@@R.C.A.D. No problem, we all have several occupations 😉👍

[@satorrotas]

@@R.C.A.D. I just watched the translation came back, I will be able to watch your videos 😊

[@R.C.A.D.]

Nice! 😁👍 I'm glad that it's working again.

[@balzate26]

Excelente ilustración, definitivamente no gastar dinero en la conexión rápida

[@R.C.A.D.]

😊🙏

[@Rcnallostudio]

I love huina ❤

[@dvega69]

Dang it! I really wanted the quick changer for the log grappler. No where to use the small screw to keep the other claw stationary

[@R.C.A.D.]

Sadly the Quick disconnect is kinda a waste of money ☹️ I talk a little bit more about the "quick disconnect" on my Huina 580 upgrade video, and it's also when I decided to quit using the quick disconnect all together.🤔😕😆 Thanks for your great comment and for checking out the video my friend. 😊👍

[@WoodsUnknown]

Great video my friend, would jbweld work on the buckets where they just tack welded them together. Stay safe bud.

[@R.C.A.D.]

😊😂👍👍 jb weld! It would definitely do the job, but it probably wouldn't look to pretty,😬 esh! 😂Lol Although,🤔 if it was done smoothly, and repainted afterwards, It might actually turn out pretty good.😄👍 A small tig welder might be a better alternative, or possibly some Fine Brazing work.😊👍👩‍🏭 I on the other hand, Am gonna Run what I Brung, and see how long it lasts.😂👍👍 And then I'll fix it afterwards. 🤣 lol Thanks for your great question/suggestion,😁👍 And much appreciation as always for checking out the video my Brother.😊🤜🤛

[@islandrc-duke1972]

Cool excavator parts

[@R.C.A.D.]

😁👍🙏 Thank you Sir! Hopefully they work as good as they look,😂 lol Thanks for your Great Comment, and for taking the time to check out the video my Brother.😊🤜🤛

[@IDBRCvids]

I dont think the quick attachment would last long in real life use TBH. If sand or water gets into the motor and moving parts, it would be all over for it. That wire sticking out of the side could be damaged too and/or get ripped off during digging a trench etc. The one thing that I reckon nobody thinks about is the difference in leverage with it on. It is putting the bucket a bit further away from the arm so the machine will have to work a bit harder to dig. If you have a good strong machine like the 1580, this might not be an issue but I reckon it might be a bit hard on something like a 1592 that does not have the servos like the 1580 has. I could be wrong here but its just my thought on it and why I decided against getting one myself. I definitely agree that the welding is poor quality on the yellow bucket. I even noticed it before you said it on the video. Same with the ripper. They still should hold up to normal use though. Probably wont even be as obvious when they get dirty from use lol.

[@R.C.A.D.]

Agreed across the board, And the Quick disconnect is worthless too, it gets sand in the threads, and then doesn't want to open "and at that point, it's almost a permanent item,😂 You're much better off without the quick disconnect.😁 As far as everything else; The crappy welds are holding up well.😁 Thanks for your Awesome comments, and many more thanks for checking out the video my friend.😊👍

[@MrPopo-pl2ip]

Hay can you give me a link to where I can buy the quick hitch and the buckets so I can buy them grate video you deserve way more subscribers and I’ll tell my friend about you keep up the grate work

[@R.C.A.D.]

Links ? 🤔 Well I could give you a link to Xtreme RC's website where I got these from, but they are kinda of a rip-off when it comes to the attachments, way........... overpriced! 🙄 Your best bet is to Google Huina 580 Upgrades or Attachments, and see what's available, No matter where you buy them from wether it's eBay the Wish app or Xtreme RC, there pretty much all the same,😕 except that you can get them much cheaper from eBay 😁👍 I bought the majority of my stuff from Xtreme RC and paid way to much, my older brother got his stuff from the Wish app and it was half the price, except for the shipping, that was kinda pricey, but still less than Xtreme RC, Yep eBay is the Best way to go. 😄👍 Very much appreciated for your Awesome Compliments "E" 😊🙏 and many thanks for checking out the video my friend. 😁👍🤜🤛

[@Charlesbjtown]

Will the grabber work with the kabolite? I've got one on order.

[@R.C.A.D.]

Kabolite!!!! 😧🤤 Whoa! Stand back! Big spender coming through,😄 Which one did you get Charles ? The 336GC or the K970 ? If it's the K970 then I'm done talking with ya 😂 lol 🤑12k for a toy excavator is Nutz 🥴🤒🤢🤮 that's like Drug dealer money 💰💰💰 And I don't know any dealer's who are that crazy 😄😂 lol Man if I had 12k laying around, I certainly wouldn't be spending it on a toy excavator,🙄 although I am guilty of spending that kinda money on Harley's, my last one cost me 28k, and that just gets you in the door, after that they keep costing you more money, Money for Gas,money for dinners,money for events, money, money, money, 🤑 It ends up being a few hundred per week on top of the initial motorcycle purchase,🙄 not to mention cross country trip's, things really start adding up with those,😵 ahh! 💸💸💸💸 It's almost as bad as owning a boat, which is just a hole in the water that you throw money into,🙄😂 lol Except the Harley is much cooler, if it breaks down, or runs out of gas, at least you don't have to swim home,😂 Anyways, out of curiosity, which one did you get Charlie, the Kabolite 336 or the 12k 970 ? 😊 All joking aside and to answer your question, 😉 I would have to say probably not with the grabber, but I'm just guessing, 🤔 It might be able to fit, but I would need to know the Dimensions of the Bottom end of the Secondary boom, before I could say one way, or the other, if it's going to fit, or not, But I tell you what we can do,🤔 When you get your Awesome excavator, take a few measurements on the secondary boom, Measure across the bottom of the boom where the bucket attaches "boom width", And then measure the bucket linkages, and the length between the linkage and the bucket itself, and then measure the width of the linkage where it attaches to the back of the bucket, and write everything down, After that, Hit me up again, and let me know what the measurements are, and I'll do some measuring on this end, and let you know "for sure" wether the grabber will fit, or not.😊👍 In closing; Many Thanks for your Great Question Charles, And a Big Congratulations on your new Excavator 😁👍🎉🎉 Very Cool.... And many more thanks for checking out the video my Brother. 😁😊🙏🤜🤛

[@Charlesbjtown]

@@R.C.A.D. I can't afford the 970, I don't have 10k to throw at an RC, wish I did though. Ok, will take some measurements, when I get it. I ordered it days ago, but it STILL hasn't shipped. Hopefully I get it soon.

[@Charlesbjtown]

@@R.C.A.D. Got the 336gc

[@R.C.A.D.]

😁👍 Right on, and I'm in the same boat Brother,😂 I currently don't have 10k to throw at a RC excavator either, But I certainly wish that I did, that would be Sweet,😁😂👍 But just like anything else that's cool, it would just be the beginning of the spending spree, The excavator gets you in the door, but the package isn't complete until you get everything else that goes with it, Dump truck, Loader, Dozer, and a Big enough Truck & trailer to haul everything around with.😂 RC Construction Equipment is a Very addictive side to the world of RC's.😄👍 Hit me up when you get that kickA## machine my friend and we'll see if the grabber will fit or not.😉👍

[@SimpleGuy795]

The claw dont need no spring. There is a special Little hole for a screw. I cant show You the picture here. But i have it and i was thinking Just like You ka spring or something) no. Look for a second Little hole in arm and claw.

[@R.C.A.D.]

Well unfortunately... I'm right in the middle of moving all the contents from One of our pole barns, into a new larger pole barn, And all of my "RC construction equipment" is completely buried,😕 So I'm not able to see what you are talking about with "that little screw hole" at least not anytime soon anyways.😕 Now back to the screw hole in question, What exactly is the purpose of that little screw hole ? 😕 You failed to mention the significance of that little screw hole 🤔 What is it for ? And how does it help out with picking stuff up ? I mean it's not like Huina explains anything about it, or include instructions of any kind, about any of the attachments.😕 All I seen, was a obvious problem with the claw, and then came up with a simple solution to fix the problem, But that doesn't mean it gives you the right to say, That the Claw doesn't need a spring, 🤔 Especially when you fail to mention the significance, or purpose, of the "little screw hole" that you are speaking of.😕 Basically all you told me is that you don't need no spring, And then you said absolutely nothing about the cure for the problem... Which means that you're not much help for me, or anyone else who might be reading these comments. I'm not trying to sound like a jerk, But that's exactly how your comment is coming off to me,🤔 "The claw don't need no spring!" Sounds pretty strong Sebastian 😕 And then it taper's down to ignorance, since you failed to explain the purpose of the second screw hole, Which means that you're not much help.😕 Fyi; You can catch more fly's with Honey, vs using Vinegar Sebastian! 😕 You starting out by saying that "the claw don't need no spring" Comes off pretty Strong, at least that's how it sounded to me anyways,😕 Maybe next time try rewording it, 🤔 For instance; The Claw doesn't necessarily need a spring, and then go into an explanation as to "why" it doesn't need a spring, Instead of starting out with "The claw don't need no spring" 😕 (Just a suggestion towards getting a kind response from me in return) Otherwise thanks for your Half-assed information, and for checking out the video.

[@SimpleGuy795]

@@R.C.A.D. i Will record a movie for you today and show You what is the Point of that Little screw. In simplest way : one part of the claw is static and fixed to the arm. Only one part is Moving.

[@SimpleGuy795]

@@R.C.A.D. i have recorder a movie for you. Look here kzbin.info/www/bejne/fnTai6yYq7mUisk

[@R.C.A.D.]

Right on 😊👍 My apologies for being harsh too,😕 Your comment was received at the wrong time, and I probably should have waited a few more hours before answering you the first time,🙄😕 Sorry man.... I'm usually Nicer than Nice 98% of the time, But I also have a Wicked Temper! Down Right Evil Temper, and when I'm in that mood I'm not to be trifled with,🤔😕 My Apologies Brother 🙏 Back to the Robster Craw! 😂 It would have been nice, if Huina would have given some instructions, on how to properly install that darn thing.😂 Lol Otherwise.. the spring thing works pretty good, as an "alternative" to the Correct way of installing the Timber Grabber. Ha ha ha lol 😂 Sorry for the Bit€hin SimpleGuy 😕🙏 please don't hold it against me, I'm normally a Cool Dude to chat with.😉👍 Hit me up when you get that video out, and I'll make sure to check it out.😁 And then you can bit€h at me in your comment area,if that would even things back up for you. 😂👍🤜🤛

[@michaelhutson6428]

Will any of the up grades work on the 1593 or is there some different up grades for it

[@R.C.A.D.]

All of the 580's bucket attachments will work with out a Doubt,😊👍 And the 580's all metal Track Drive units, (which are the motor assembly's that drive the tracks) Should also work on the 1593 🤔 And The Screw drivin servos on the 580, would also probably work on the 1593 And If you really wanted to, You could probably Install a 580 Main Boom assembly on the 1593 as well, 🤔 But that's about it 😕 For the Slueing gear, and Slueing servo, I believe that you have to use the Upgraded "1550" metal slueing gear and servo assembly for the 1593. And I believe that is about all that you can Upgrade on the 1593, fyi I also have a 1593 sitting here for reference 😂👍 lol Thanks for your great question Michael, And much appreciation for checking out the video my friend.😊👍

[@michaelhutson6428]

@@R.C.A.D. thanks for the advice I just purchased my first 1593

[@R.C.A.D.]

no problem, And Nice! On your 1593 purchase, I can definitely Dig That! 😄 lol Congratulations Brother 🎉 😁🤜🤛

[@lachlansoutdoorworld]

Does this work on the 1592

[@R.C.A.D.]

It should work on it, but no guarantees! 😕 It works on the 1580,1550 & 1593 But I'm not sure about the 1592, I would assume Yes, "just because it works on the rest" but once again I can't guarantee it.😕👌 Otherwise thanks for your great question, and for taking the time to check out the video my friend.😊👍

[@martinsrc8752]

Jim-I know you will be working on your 580. I wonder if you can make it heavier than mine? Those hitches are all red-the dumbest thing so far..

[@R.C.A.D.]

How much is your 580 weighing in at Marcin ? 😕 I know that adding extra weight Void's the factory warranty,🤔 not that I'm very concerned with that,😂 But I might keep it in stock form for the first year just in case,😊 After that though, it's totally Game On! 😁👍 Technically Speaking, I still haven't even used the Excavator as of yet,😕 Still waiting on replacement parts,"which are currently in New York and on their way here" And mother nature decided to give us another taste of winter for the last week, or so.❄️🥶 So I still haven't had a opportunity to use my new Excavator.🥺 Back to the weather for a second; it's funny, it was warm and sunny for a few weeks, Then we decided to do a complete yard Spring Clean-up, cleared all the leaves, and I even mowed the lawn,🤔 And I kid you not, It snowed the very next day,❄️🤷🙄 and it's been Cold 🥶 ever since,😕 Unbelievable! 🙄🥺 Back to the Excavator; 😁 Red Hitch is downright Ugly! I don't know what the manufacturer was thinking,🤷 All that I can come up with, is that they must have had a bunch of red paint laying around that they needed to get rid of,🙄 Because otherwise, it makes absolutely no sense whatsoever,🤷 Yellow would have been a good choice, and I think that Black would have been even better,😁👍 Black would be a Perfect Contrast.👍 But Red is Ridiculously! 😂 Lol And I don't exactly like the plug 🔌 hanging off of it either,🤔 kinda ruins the scale realism.😕 They need to make that plug look like a Hydraulic coupler or something,🤔 "Magom hrc" makes a manual operated hitch, that I'm thinking about replacing this one with, It's all aluminum, and has Absolutely no Cord's hanging off of it.😁👍 As always thanks for your Great Comment, and for checking out the video my Brother.😁👍👍 P.S. Hopefully all is well with You and your Girl, I recently seen some stuff on the news, about what's going on in your country, Very troubling to be sure! Hopefully you all are doing well, and are unaffected by everything.😊👍👍

[@martinsrc8752]

@@R.C.A.D. I have manual hitch and happy with it. I can't play around changing buckets for videos but it's simple and strong and that's good enough for me. We're both absolutely fine. Thanks for asking, that's very kind of you Jim'O :) As for the weather it's great here for the moment but we had a winter strike too.

[@dcfphilrc5832]

👍

[@R.C.A.D.]

😁👍🤜🤛

[@Ghryst]

the following points jump out at me: 1, incompatibility with original parts, and 2, the non-proportional controls of the arm movements will make it hard to line up with any attachments sitting on the ground and practically requiring manually putting the attachments on the connector before engaging the clamp.. these two points brings me to the conclusion that an electric quick connect is a waste of money on these lower end machines, such as the 1580, 1592/3 etc, as you will have to break the immersion by getting your hands involved in the changeover process, and you might as well save a few dollars by getting a manual quick connect.. but even then, now i have to assume that a manual quick connect is also incompatible with the original attachments too.. so sad..

[@R.C.A.D.]

Yup... That thing is Totally worthless... The quick disconnect is a quick way to waste your money.😄lol

[@R.C.A.D.]

But all of the other items in the video work just fine, And they are compatible with just about all of the Huina Excavators.😁👍

[@Ghryst]

@@R.C.A.D. i do like the look of that yellow bucket, and agree about the 'welding' being just spots. do you know if it is steel or alloy? steel could be fixed up with some solder and a fresh coat of paint. but even if its alloy, you could glue up the gaps and re-paint

[@R.C.A.D.]

@Ghryst All those yellow items are Awesome, and since I purchased them I haven't gone back to the stock one. As far as what they are made of; I'm not sure... They might be steel, to their definitely magnetic, so they're definitely not an alloy.😁 Side note; I get more use out of the Giant Yellow grading bucket "than anything else... 😊 Weld's; it's been a few years since I bought this stuff, and everything has been well used in that time, And so far everything is holding up perfectly.😊👍

[@Ghryst]

@@R.C.A.D. i seen an electric Rotary Trommel Bucket advertised online from similar sellers thnat have your yellow gear.. you had any experience with that? it looks really cool