How To Clean a Throttle Body ~ The RIGHT Way

  Рет қаралды 1,812,311

HumbleMechanic

HumbleMechanic

5 жыл бұрын

How to properly clean a throttle body or throttle plate. In this video I will show you exactly how to clean a throttle body. Cleaning the throttle body is an EASY DIY, and can help with a rough idle, check engine light, even sticking throttle. Reprogramming or adapting a throttle body is also recommended after cleaning. #throttlebody #humblemechanic
Throttle Body Cleaner ~ amzn.to/2Colrp7
WD-40 ~ www.wd40.com
Gloves ~ amzn.to/2R7BUpJ
Electric Ratchet ~ amzn.to/2QFjFIL
Shop Towels ~ amzn.to/2Ra3lPu
Green Scrubbies ~ amzn.to/2R6EzzU
Cleaning Brush ~ amzn.to/2EF3XHg
Old Tooth Brush ~ (Just use someone's old brush)
~~~~ Support the Show ~~~~
Become A CrewMember ~ goo.gl/D7eROI
Patreon ~ www.patreon.com/user?u=4243029
Shop Amazon ~www.amazon.com/shop/humblemec...
Audio ONLY Podcasts ~ goo.gl/5XcZxB
~~~~ Recommended Tools ~~~~
Impact driver ~ amzn.to/2HsxS2H
Small Impact driver ~ amzn.to/2DZdsMN
Electric ratchet ~ amzn.to/2FydxMS
Magnetic tray ~ amzn.to/2FEpQ6g
Basic hand tools ~ amzn.to/2GnjF7K
Box wrench set ~ amzn.to/2FzoJch
ScrewDriver set ~ amzn.to/2FEjcgd
Shop towels ~ amzn.to/2FC7UgM
Torque Wrench ~ amzn.to/2I7ke5h
Allen Sockets ~ amzn.to/2GlcnAz
Torx Sockets ~ amzn.to/2pL0SfL
~~~~ Playlists ~~~~
Humble Mechanic Podcasts ~ • The Humble Mechanic Po...
Project White Wookie ~ • MK3 VR6 GTI Project Car
Failed VW parts videos ~ • How VW Parts Fail
Tool and Product Reviews ~ • Tool and Product Reviews
How To videos ~ • How To Fix Your Car
MK1 VR6 Swap Videos ~ • VR6 Engine Swap MK1 Ca...
~~~~ Be sure to follow me at ~~~~
humblemechanic.com
INSTAGRAM ~ / humblemechanic
FACEBOOK ~ / humblemechanic
TWITTER ~ / humblemechanic
Amazon Store ~ www.amazon.com/shop/humblemec...

Пікірлер: 958
@alibairos8934
@alibairos8934 3 жыл бұрын
THANK YOU, SIR!!! - my wife's 2004 Explorer hadn't been started since February (CV-19, y'know); replaced battery but car stuck in limp home mode, codes P211/2112 (throttle actuator stuck open/closed). A thorough cleaning per your clear instructions and it runs like normal. Cost=$0.00; already had cleaners and scrubbier.
@TonyTorzido
@TonyTorzido 3 жыл бұрын
$800 dollars for a new one and labor. Just bought some spray and old brush. $10 lol. Thx G
@Ericsaidful
@Ericsaidful 3 жыл бұрын
Its odd to me that humans in modern society spend so much of their lives in cars yet oftentimes know so little. Believe this will become a required bit of learning at home for my 3 kids.
@nicolasfernandez7402
@nicolasfernandez7402 3 жыл бұрын
@@Ericsaidful I have a boy on the way and you bet ill be teaching him young on how an engine works.
@tallpaul9475
@tallpaul9475 3 жыл бұрын
It is so easy to pull remove and put a new one, I bet it would be much less than $800.
@CorbinAce
@CorbinAce 3 жыл бұрын
@@Ericsaidful Your' comment jogged my memory of when my father bought me my first car in 1951 so I could get a job. When he handed me the keys his comment was you better learn how to work on this thing, you're not calling me at 3:00 in the morning if you get stuck. It was a 1937 Plymouth. :O)
@mrclean2108
@mrclean2108 3 жыл бұрын
@@tallpaul9475 mine also costs upwards of 800 lol think he meant the throttle body itself is 800 and then labor is extra
@jeffc6832
@jeffc6832 5 жыл бұрын
Perfect timing, my wife's '09 Sonata just had a no-start yesterday due to a dirty throttle body.
@sarahscarborough4995
@sarahscarborough4995 3 жыл бұрын
Great tutorial! The way the process was explained leaves no gaps in understanding throttle body cleaning. Thank you.
@Jan-gq6nz
@Jan-gq6nz 3 жыл бұрын
This is the most comprehensive , easy to understand instruction for cleaning the TB that I've seen...I now need to get up the courage to do it! Thank you!
@carlosabreuv
@carlosabreuv 2 жыл бұрын
Totally agree.
@RickyPisano
@RickyPisano 3 жыл бұрын
The best throttle body cleaning vid I've ever seen on KZbin. And I've watched a LOT. THANKS A MILLION BRO!!
@matthewshambler2644
@matthewshambler2644 5 жыл бұрын
The difference that doing a throttle body adaptation can make is amazing! In SA we have a lot of Mk3 Golfs/Jettas and "Citi Golfs" that use the Bosch MP9 EFI system. The TB's get gummed up and the stepper motor struggles more and more to stabilise idle- a good clean and adaptation (channel 098 on a Launch scan tool) and you're good to go! Even works on getting a car with a 268,272,276 degree cam to idle "properly".
@mygmail4148
@mygmail4148 3 жыл бұрын
Love this brother video. He explained it in a simple to understand manner for a non mechanical guy like me. Well done bro 👍
@dc76384
@dc76384 3 жыл бұрын
Excellent video. Very thorough. You even remembered the small details that alot of people miss, as in cleaning the mating surface of the TB and intake, also replacing the gasket.
@davegillett4036
@davegillett4036 5 жыл бұрын
This is exactly the information i need right now! Thank you! 😁
@alexrush5780
@alexrush5780 2 ай бұрын
Just spent the afternoon thoroughly cleaning my mustang that’s been dead since last summer. Started up and drove no problem after a $10 fix using this video. You’re the best man thank you!
@s7powell87
@s7powell87 Жыл бұрын
Explained to perfection and done so thoroughly. Thank you for sharing and for all the other helpful comments.
@markphilpot4981
@markphilpot4981 4 жыл бұрын
Very good basic cleaning video! You did not forget safety issues and kept it real! Not everyone has all the tools, but a torque wrench can be borrowed or rented so it is not that hard. The key on torque is not to overdo it. Some guys think you have to grunt it or it isn’t tight. That is another trip to buy a part that isn’t cheap! Duh!
@seandunks3526
@seandunks3526 Жыл бұрын
No need for a torque wrench at all it’s just extra
@bluemonday2000
@bluemonday2000 9 ай бұрын
​@@seandunks3526shut up nerd
@brownbunny2513
@brownbunny2513 4 жыл бұрын
Thank you so much for making this video. My 2010 Chyrsler 300, has never seen a throttle body cleaning, but it will tomorrow.
@krasimir424
@krasimir424 3 жыл бұрын
I have kia forte koup 2010 and haven't cleaned the throttle yet. Thanks for posting
@rogerpr364
@rogerpr364 Жыл бұрын
Wow! This is THE best school of servicing throttle body, Thanks for posting this, very much apriciated!!
@zackpoire7095
@zackpoire7095 3 жыл бұрын
Very helpful, did the same yesterday now watching to double check everything. Thanks man!
@condor5635
@condor5635 2 жыл бұрын
Great video. Funny I clean mine today and used a screwdriver handle to hold it open just like you did. Brilliant minds think alike! I just use acetone since it’s 80 to 90% of what’s in a spray bottle of CRC throttle bottle. Thanks for posting!
@BigDaddysGarage
@BigDaddysGarage 5 жыл бұрын
Your how to videos are so nice and detailed. I don't even own or work on any VW's, but I still like watching your videos! Thank you for making such great content!
@HumbleMechanic
@HumbleMechanic 5 жыл бұрын
Thank you so much for that. I tried to make this video apply to all cars, just with a lean on VW.
@stewartrivers2730
@stewartrivers2730 Жыл бұрын
Lol this guy 🤣
@lafamilia9328
@lafamilia9328 3 жыл бұрын
Just did my 06 Jeep Grand Cherokee (replace IAC Valve too) following your video. Just what to reach out and say thx video was perfect step by step. Jeep feels better, runs smoother. Again thx
@joreymcfadden5299
@joreymcfadden5299 Жыл бұрын
This video is awesome, clearly a professional! I'm a backyard mechanic with a auto auction right down the road! Love these videos
@Siillky
@Siillky 3 жыл бұрын
Best throttle body cleaning video I’ve ever seen
@Tony-Rinaldo
@Tony-Rinaldo 3 жыл бұрын
What you got on my 40, homie?
@mr.nobody4900
@mr.nobody4900 5 жыл бұрын
Wow, I am blown away by this video...So helpful thank you, Mr for making this video.
@HumbleMechanic
@HumbleMechanic 5 жыл бұрын
Thanks for the kind words.
@jeanlouisroederer5140
@jeanlouisroederer5140 2 жыл бұрын
Great video and clear explanation. I like how careful you are and the cautions you advise. Thanks
@jasonrainwater1218
@jasonrainwater1218 15 күн бұрын
Thorough, articulate, clear . Home run podnuh. I will be referring back to this video soon to clean my throttle. Hats off to ya !!!!
@eazyonewiththeforce
@eazyonewiththeforce 4 жыл бұрын
Ok sir this is a great video. Definitely learned something. Just got my VW back from the dealership they cleaned the Throttle body and on my way home my tac would not go over 3k I did the key on then off and it worked. Thanks again
@Cheepchipsable
@Cheepchipsable 3 жыл бұрын
Pretty slack of them not to do it before returning the car to you. May have been some other fault.
@final0222
@final0222 4 жыл бұрын
IMPORTANT! If your throttle body is an electric one, don't force open the butterfly as you may break the spring inside. Also the adaptation without vcds or vagcom might work, but always check on a forum of your car on how-to do it properly, as if you aren't prepared it's cost more than let a mechanic clean it for you
@final0222
@final0222 Жыл бұрын
@Thatbeanieguy If the TB is controller by wire from gas pedal? then it's not electric. Most cars in the last 15-20 years are electric controlled.
@9aws.14
@9aws.14 7 ай бұрын
Yepp I tried to clean mine the way he is cleaning it in this video throttle body went bad because I used my hand to opsen it
@darylkik6204
@darylkik6204 2 жыл бұрын
Thanks for putting it simple and easy terms. I will be checking out more of your videos.
@jeffreylouism
@jeffreylouism 4 жыл бұрын
Perfect video, very professional and well thought out. Keep it up. 👍🏆
@yanislavslavkov3564
@yanislavslavkov3564 5 жыл бұрын
For old cable driven body on Peugeot is 15 Sec key switch on, 15 sec key switch off than switch on again start the car and leave it to idle till operating temp and cooling fans turn on . For new models its similar technique but with diagnostic tool :) Great Videos , im working in Peugeot dealership. Cheers
@mr.sharik
@mr.sharik 2 жыл бұрын
So on newer (2005+) models you actually NEED propper diagnostic computer to relearn after cleanin dirty throttle body - no more handy key switch on and off for that? My 1007 1.4 petrol started to work like a diesel after throttle body cleaning..
@rw5640
@rw5640 2 жыл бұрын
T to yu uyyy
@bojanpetric5030
@bojanpetric5030 5 жыл бұрын
Helped with idle problem, thanks a lot, just done it today and car from almost dead, and choking and spitting missfire explosion to normal idle work, can't beleive this was problem that much, once again thanks for help
@justinstevenson2061
@justinstevenson2061 3 жыл бұрын
Ya fingers crossed it works for me!! Started sputtering and stalling, threw ecm code which shows either bad air or fuel intake. Most people said MAF or fuel filter. Changed the MAF no luck. Fought the “quick disconnect” fuel lines to change the filter. Aaaaaaaannndddd nothing. Heard my throttle whining and clicking so going to take it apart and see......
@myskullisred
@myskullisred 10 ай бұрын
Really love the little tips/tricks you add in along the way (e.g. 3:00 & 3:30). Little things like that are so helpful to novices like me.
@jcarey1010
@jcarey1010 5 жыл бұрын
Awesome!! Another thing added to the list I need to do to my MKIV I'm sure it needs it lol. Great info Charles. Awesome work!
@salvatorespalato3503
@salvatorespalato3503 3 жыл бұрын
Getting my throttle body cleaned on my car has worked absolute wonders. My car was stalling sometimes when stopping and getting it cleaned has stopped it wanting to stall. I'm so happy. 🤞🏻🇦🇺
@t.stephengardner8151
@t.stephengardner8151 2 жыл бұрын
I thank you for the insight as to why my 2006 Trailblazer is stalling and running rough when stopped. That's what I was looking for when I Googled how to clean the throttle body.
@richardbustin4140
@richardbustin4140 2 жыл бұрын
I was having problems with my car and was quoted R4500 for new throttle body, saw this video and decided to follow it and do as explained, long story short car works, money saved, great video.
@BroadwayLTDProductions
@BroadwayLTDProductions Жыл бұрын
Yeah shops are like that. That is why I mostly work on my own car especially since I drive for Uber and put a TON of miles on the car!
@marialab1292
@marialab1292 2 ай бұрын
Thank you ! Great explanation/demo in a not too fast manner. Planning on doing this to my 4runner when the weather breaks
@twinpro7424
@twinpro7424 2 жыл бұрын
Thank you for this video. The shop was trying to replace it. But it just needed to be cleaned. You saved me money! I subscribed so o can see more ways to save. Thank man!
@carlosmaurencig6763
@carlosmaurencig6763 5 жыл бұрын
Great video and tip about the Key-On relearn Thanks
@corradokid90
@corradokid90 5 жыл бұрын
Great video Charles!!! Keep them coming. Happy Holidays to you and your family
@NickOfNight
@NickOfNight Ай бұрын
Thanks! Clear, easy to follow, very informative!
5 жыл бұрын
Just had to do this to my car. Was running like crap and I knew what it was right away. Runs great now!
@coorsman5499
@coorsman5499 5 жыл бұрын
Great video appropriate all the videos you put out alway super informative I own a 2010 Silverado that’s need a cleaning what kind of affordable device could I buy to reset the throttle body
@AlexKalicinski
@AlexKalicinski 5 жыл бұрын
Cool! and thank you for the help. You rock!
@dekalogue
@dekalogue 2 ай бұрын
Great video! Thank you for making this.
@TheUberdude14
@TheUberdude14 5 жыл бұрын
Oof this hits home lol, clean vw throttle body's daily at work. Customers really notice the difference when done properly
@steprockmedia
@steprockmedia 3 жыл бұрын
This vid was really well done. I appreciate it.
@JorgeRodriguez-po7kx
@JorgeRodriguez-po7kx 3 жыл бұрын
Definitely
@amak1131
@amak1131 5 жыл бұрын
I did similar on my 97 Saturn SL2 as I was able to get the throttle body off easily. Gas pedal needed a kick to engage, fixed it!
@MrGreenelight
@MrGreenelight 4 жыл бұрын
amak1131, I have a 2001 Saturn L300. I suspect I may have a throttle body issue. What were the symptoms with yours.
@CerronPritchett
@CerronPritchett 4 жыл бұрын
I might have to do that on mine with the throttle body it starting idling high this morning.
@MrMatt713
@MrMatt713 3 жыл бұрын
make sure you replace the gasket, even if it looks good those cars are picky. Had a Saturn with a weird idle creeping high idle and it turns out it was the throttle body gasket.
@jamesjones7847
@jamesjones7847 Жыл бұрын
Thanks for the video . And can now clean my throttle body with no worries 😊
@teddyvillaflor4036
@teddyvillaflor4036 3 жыл бұрын
Thank you for sharing your knowledge... From Philippines.
@RepairRenovateRenew
@RepairRenovateRenew 5 жыл бұрын
I'd say don't use a scrubby pad if your throttle plate is coated, like in a Mazda Miata. Personally id say avoid abrasive action if possible. That said awesome vid mate
@slygrinko253
@slygrinko253 4 жыл бұрын
why?
@seanwatts392
@seanwatts392 4 жыл бұрын
@@slygrinko253 because you can scratch around the throttle plate and air can escape and make your idle more rough
@slygrinko253
@slygrinko253 4 жыл бұрын
@@seanwatts392 got it, thank you
@jordonboring3729
@jordonboring3729 3 жыл бұрын
a scrubby pad is not going to scratch aluminum...
@metzmatu8409
@metzmatu8409 3 жыл бұрын
The aluminium plate is not the concern, its the coating surface may get damage
@johnaclark1
@johnaclark1 5 жыл бұрын
Some manufacturers don't want you spraying the cleaner directly in the TB because they have special grease on the shaft that can be washed out. Spraying on a rag and wiping it is the preferred method. Also a lot of them have special coatings that can be removed by some harsh cleaners. I'm not sure the scotch brite would be good to use on something like that so be sure and check your service data before cleaning. Lastly, some vehicles it is impossible to readapt the TB learn values without an expensive bidirectional scan tool (like VCDS.) You can end up with some wierd stuff going on with idle. Honda, for example, will not learn the idle without the bidirectional scan tool.
@sony12345111
@sony12345111 5 жыл бұрын
Actually a way around that with Honda is doing a ECM relearn by disconnecting the battery ends and touching then together for 15-30 mins. That forces the car to relearn everything.
@johnaclark1
@johnaclark1 5 жыл бұрын
@@sony12345111 Nope. That does not reset the PCM, nor does it clear the TP data necessary to do an idle relearn. Been there done that and it doesn't work. I've tried it. I can say that definitively on an 08 Odyssey 3.5L V6. It clears all the stored codes and may clear some other data I'm not aware of but not the TP data.
@sony12345111
@sony12345111 5 жыл бұрын
@@johnaclark1 interesting, we do that at the dealership all the time because it's faster then finding a scan tool. I haven't had to do it that often but on the two cars I tried it worked
@johnaclark1
@johnaclark1 5 жыл бұрын
@@sony12345111 Yeah, when I finally got the scan tool that would do the job it has a data PID that allows you to see the status of the idle relearn. Disconnecting the battery and holding the terminals together would not put that PID into "learning." It stayed at complete. Only a "PCM Reset" or "Clear TP data" would change it from "complete" to "learning," followed by "complete" after about 10-15 mins of idle with no loads on.
@johnaclark1
@johnaclark1 5 жыл бұрын
@@TheRobertChannel It's not false information. I have an 08 Odyssey that would NOT relearn the idle until the TP data was cleared with the scan tool. The idle learn PID stayed at "complete" until I reset with the tool and it then changed to "Learning" and then 10 minutes or so of idling changed to "complete" and was fixed. I tried your method. It didn't work. Trust me, I tried everything and ended up having to buy a bidirectional scan tool. Once I cleared the TP data all worked well.
@BEINGOOD77
@BEINGOOD77 Жыл бұрын
Finally I getting the bugs, issues cleared up. Thank you. ZZ Top.
@MsSherro
@MsSherro 3 жыл бұрын
Great video!!! So helpful! Thank you!
@jalopyjoe3069
@jalopyjoe3069 5 жыл бұрын
Great vid, you should give us a vid on cleaning a MAF sensor properly.
@HumbleMechanic
@HumbleMechanic 5 жыл бұрын
I’m not a fan of cleaning MAFs in many situations. But that comes from seeing so many MK4 MAFs screwed up haha
@dwalto1977
@dwalto1977 2 жыл бұрын
Keep in mind that some manufacturers coat the throttle body bore with a specialized material and if you clean it aggressively, as this video instructs, you will remove the coating and the valve will not seal properly in the bore. This will create a higher than normal idle.
@wellnesspathforme6236
@wellnesspathforme6236 Жыл бұрын
Maybe use a plastic "brillo" pad version to do the scrubbing to avoid scratching off the coating. Let it soak for a bit longer and scrub a bit longer. Recommend this be done on cooking pots and pans, too. Keeps residual metal from being ingested and keeps the pans in better shape so they last longer.
@wellnesspathforme6236
@wellnesspathforme6236 Жыл бұрын
Use a plastic woven dish scrubber instead of the green scour pads. Let the chemical sit for a little longer and scrub a little longer. Recommend you do the same technique for your dishes, too -- using dish appropriate cleaning supplies, of course. Your pans will last longer and you will reduce the micro dose of metals that end up in your food.
@khoda9441
@khoda9441 3 жыл бұрын
Great vid man, you are both practical and techinal.👍👍
@leomysky
@leomysky 2 ай бұрын
Thanks for the video, man!
@theamerican7080
@theamerican7080 4 жыл бұрын
Finally, some CORRECT automotive advice.
@thurm101
@thurm101 4 жыл бұрын
Great video. Just got done on my Honda. Really easy maintenance. I disconnected the battery. Took it off completely so that I can do the backside. It was extremely dirty. I bought the car secondhand. Looks as if this has never been done. Lost a little coolant. But that was ok. Now how does the relearn process process goes on a Honda ?
@metzmatu8409
@metzmatu8409 3 жыл бұрын
Perform a Honda throttle body relearn Reinstall the Honda throttle body using a new gasket and torque to specifications. Now that the carbon buildup is gone, you must “teach” the computer where the fully closed position is. This is called a Honda throttle body relearn or Honda throttle body reset. Shops perform a Honda throttle body reset with a scan tool, but you can perform it manually by following this procedure: 1) Turn the ignition key to the RUN position for 2-seconds. Do not start the engine. 2) Start the engine and run it at 3,000 RPM until the radiator fans come on. 3) Then let the ending idle for five minutes with no loads (lights, heated seats, rear defogger, blower motor, radio, etc OFF) 4) After five minutes, shut off the engine.
@likesrush
@likesrush 3 жыл бұрын
Anyone know how to do a relearn on a 2003 VW Passat W8 wagon (4.0 L) throttle body?
@Blahblahblah94
@Blahblahblah94 4 жыл бұрын
Thank you for this man! Helping with my s4
@marcusmarcuscook
@marcusmarcuscook 6 ай бұрын
All I can say is thank, bro. This was alot of help
@user-xk5so7wb2t
@user-xk5so7wb2t 5 жыл бұрын
Awesome job cleaning T.B. But why did you leave the intake manifold so dirty (7:29-7:35)???
@zuilok
@zuilok 5 жыл бұрын
If you wanna call this throttle body dirty. I am not sure what you´d call the one I once cleaned on a mk3 golf. It had like a solid milimeter of crud all over the inside.
@miralemnermina142
@miralemnermina142 5 жыл бұрын
Yup, same with my mums Punto
@zuilok
@zuilok 5 жыл бұрын
@@miralemnermina142 Haha my mum has a punto. I am afraid to touch it because it just seems to be falling apart by its own.
@brandonburt4244
@brandonburt4244 5 жыл бұрын
zuilok dude my mk4 vr6 had so much shit in there...
@miralemnermina142
@miralemnermina142 5 жыл бұрын
@@zuilok Which gen one? This one has +200 000km and has been abused all his life but it's reliable as fuck
@HumbleMechanic
@HumbleMechanic 5 жыл бұрын
That is how my MK3 was too. LOL
@blinkybill2997
@blinkybill2997 4 жыл бұрын
Well done. Clearly explained. Thanks
@rasheedkareem7520
@rasheedkareem7520 3 жыл бұрын
The video is so outstanding. Good job
@nickolastiguan
@nickolastiguan 5 жыл бұрын
Cleaning the TB and MAFS feels oddly satisfying to me
@AnonYmous-qg4ph
@AnonYmous-qg4ph 5 жыл бұрын
I've seen a few cars go into "limp mode" all because of a (very) dirty throttle body. It can also cause hard shifting.
@MrDCE
@MrDCE 4 жыл бұрын
Can TB cause the gearbox to slipping?
@andrewm5190
@andrewm5190 4 жыл бұрын
How does a dirty throttle body cause hard shifting?
@sabercatpuck
@sabercatpuck 2 жыл бұрын
If the engine load % falls off the PCM can command lower line pressure in the transmission, the 3.4 and 3.8 GM's are known to have issues with this, even had a TSB put out, especially talking about the MAF but I don't see why a throttle body problem couldn't cause a similar issue.
@mexico4463
@mexico4463 2 жыл бұрын
Detail explanation good job man!!
@linkedup7346
@linkedup7346 4 жыл бұрын
Great video...You approach the technical side and the common sense side very well.. Now I won't go and spray dirt from the throttle body into the engine . I'll just spray some on a cloth or shop towel and clean by hand. I don't suspect this particular car has a very dirty throttle body. Looks like I'll soon find out.
@BlatentlyFakeName
@BlatentlyFakeName 3 жыл бұрын
Btw electrical contact cleaner works just as good. Probably safer on plastics too.
@GymChess
@GymChess 2 жыл бұрын
Thats what I used. I didn't even remove the throttle body and just sprayed blindly all over it since I couldn't see what it looked like inside anyway. I noticed that there was a difference in how the car responded. One can also repeat the process at a later point though. Of course the best is to just remove it all together but if it involves reprogramming it and getting a new gasket if not available, it's better to avoid it.
@tellyfuxnbeast
@tellyfuxnbeast 5 жыл бұрын
Another method to re learn your idol.. Start the car and let it get up to operating temperature Press your emergency brake in. Pressed the brake paddle And put your car and drive. Keep your foot on the brake.. Let the car idle for atleast one minute and then turn on the AC and let idle for atleast 1 minute Final release the E brake and take it for a quick drive so it will re learn the way you drive Done!!!💪
@nottelling4828
@nottelling4828 4 жыл бұрын
The Throttle Body Relearn Procedure for 5th Gen camaro is much simpler: Idle for 3 mins, then turn off car for 1 min, then idle again for 3 mins. If it's still not idling correctly, take it for a spin at 44+ mph and then let it idle again. Voila.
@asusgoncalves
@asusgoncalves 4 жыл бұрын
I can’t do that, mine is standard 😬😂
@juancervantez7149
@juancervantez7149 3 жыл бұрын
Not Telling I have a 5th gen having that problem should I just do those steps when I’m at 44mph I just let go again till it idles how?? Sorry for my ignorance I know nothing about mechanic work. But mine is just wants to take off I cleaned the throttle body and know I try to come to a red light and all it wants to do is take off fast or jump like all accelerated it’s weird. Don’t have no check engine light nothing but that
@olenaerhardt7725
@olenaerhardt7725 3 жыл бұрын
Best film on Throttle Body cleaning + 100s very useful tips for many other car projects. Thank you very much for such a detailed film. Can you immerse the removed throttle body in the degreaser and after washing it go over with throttle body cleaner? And can you avoid that procedure with resetting the TB position? I don't have VCDS. Thank you again.
@kanabicibicimara4970
@kanabicibicimara4970 2 жыл бұрын
Thnx for ur video n its really helpful especially work on VW Golf n it’s the first time I’ve work on it after fitting back the new oil cooler n new oil filter housing..
@yednekachewmechal9935
@yednekachewmechal9935 3 жыл бұрын
This is exactly the best information i need right now! how do i reset the computer after cleaning without using a computer?
@cowboyexecution3642
@cowboyexecution3642 3 жыл бұрын
Disconnect the negative post on the battery for a couple of minutes
@shadowopsairman1583
@shadowopsairman1583 5 жыл бұрын
Always use tb cleaner and clean towels, qtips. Do not use straight carb cleaner as it can destroy certain plastics. You can spray the intake opening down too.
@naimdiego9982
@naimdiego9982 16 күн бұрын
Appreciate the video man💯
@mahamaha4816
@mahamaha4816 4 жыл бұрын
Its good you warned about cleaning throttle body attached.. some youtube junkies suggested that.. Also thanks for that clamp spray suggestion. I got a rusted bolt there. But the alignment is not under DIY.
@mentaldan666
@mentaldan666 5 жыл бұрын
File- Humble Mechanic 🚙 L Folder 📁 Videos L Folder 📁 Bad Videos L Folder 📂 Empty
@HumbleMechanic
@HumbleMechanic 5 жыл бұрын
💙💙💙
@sylvester6836
@sylvester6836 5 жыл бұрын
That intro song is so damn old school 😂
@HumbleMechanic
@HumbleMechanic 5 жыл бұрын
Hahaha I thought it was fitting. 😂
@pogchampminku2535
@pogchampminku2535 10 ай бұрын
Our family car is a 2015 holden commodore sv6 wagon. Yesterday we took it to the mechanic because the RPM was quite low (around 500, should be 750-1000) and it stalled a few times. I did some research and it said a vacuum leak or a dirty throttle body were the two most common causes of this issue and I was right! the mechanic said it was the throttle body so he gave it a clean and the car is back to normal!
@blairguinea1337
@blairguinea1337 4 жыл бұрын
HumbleMachanic Sir........I have to say your vids are so informative and man you really know what your doing. with ya style nature thankyou.
@HumbleMechanic
@HumbleMechanic 4 жыл бұрын
I appreciate that!
@mikejf4377
@mikejf4377 5 жыл бұрын
Great video, why are you not wearing nitrate gloves, they can deal with the chemicals better.
@HumbleMechanic
@HumbleMechanic 5 жыл бұрын
I didn't have any at the time. LOL IT was just before I got the green ones I have been wearing.
@trollaphobic
@trollaphobic 5 жыл бұрын
Toyotas just disconnect the battery for a few minutes. Itl forget everything. All the throttle and adjusted fuel mapping are reset, which is totally annoying cuz after disconnecting the battery its totally not uncommon for a vehicle to run rough or even stall for like a day as the computer relearns and adapts.
@carnage50x
@carnage50x 5 жыл бұрын
trollaphobic most Toyotas have a capacitor in the computer to store power for a minute or so. if you change the battery quickly it'll still remember. I've done it a few times on multiple Toyotas.
@JoseManuelCastillodamboo
@JoseManuelCastillodamboo 3 жыл бұрын
Thanks for the tuto!
@cristalak
@cristalak 2 жыл бұрын
Your Channel Is very Educative. Kudos!
@xhesizai4193
@xhesizai4193 2 жыл бұрын
Does you manually moving the throttle up and down mess up the throttle “calibration”? Lol
@MrMleri
@MrMleri 2 жыл бұрын
Hello my friend... If loss calibration how I can restore in home alone?? Thanks
@luissoto1491
@luissoto1491 2 жыл бұрын
There's usually a screw that is used to adjust it, don't mess with it though unless you're into tuning.
@michaelwalker4416
@michaelwalker4416 4 жыл бұрын
That throttle was clean already, compared to the black one I just cleaned. My girl was like, you bought a new one... best sex ever
@ThyWorm327
@ThyWorm327 3 жыл бұрын
having some idling issues with my mitsibishi shogun pinin 1.8, to the point where now it is starting up but after around 2 minutes it gets very low revs then cuts out all together.... reading a lot about throttle body being a common issue with this model so will give this a try! thanks so much :D
@jpscout8002
@jpscout8002 5 жыл бұрын
Fantastic video. Thank you for actually taking the unit off.
@Nobody-U-Want-2-Know
@Nobody-U-Want-2-Know 5 жыл бұрын
Are you certain I need to use an old toothbrush?
@manuelsalvatierra2940
@manuelsalvatierra2940 5 жыл бұрын
He said a cheap new one is fine too
@HumbleMechanic
@HumbleMechanic 5 жыл бұрын
It’s how I get my wife to use a new brush. Haha she holds on to them too long
@FourDigitedMenace
@FourDigitedMenace 5 жыл бұрын
Looool hanging her out to dry XD poor misses H. @@HumbleMechanic
@cheesemons
@cheesemons 5 жыл бұрын
You could also use your brother's toothbrush like the other youtuber.
@scoots8519
@scoots8519 3 жыл бұрын
Finally found out what happen to Forest Gump after he quit running, became throttle body mechanic.
@chriscadman5715
@chriscadman5715 Жыл бұрын
Excellent videography!
@DRE718
@DRE718 4 жыл бұрын
Thanks for this man!!!!
@greer8288
@greer8288 3 жыл бұрын
Whoa you lost me when you started talking about the computer stuff at 9:07. I don't have one if those things and I ain't going to buy one
@ItsPaulby
@ItsPaulby 4 жыл бұрын
Hard to concentrate with that R32 in the background.... come on man...
@HumbleMechanic
@HumbleMechanic 4 жыл бұрын
She’s pretty rad
@blairguinea1337
@blairguinea1337 4 жыл бұрын
Yeah the r32 is pretty nice, those things haul !
@soppingwetburgers6493
@soppingwetburgers6493 4 жыл бұрын
Thank you for making this video , subbed
@billyquaide1902
@billyquaide1902 3 жыл бұрын
Green Scrubby pad was a good recommendation. Toothbrush gunks up quickly and pads go further and work well to reach if you don't want to take throttle body off. (2004 Sienna ltd 6cyl)
@apexkeeper
@apexkeeper 5 жыл бұрын
Dont try this on one of fords goofy coated throttle bodies!
@Blazer02LS
@Blazer02LS 5 жыл бұрын
They make a coating same cleaner but it's anemic compared to the good stuff...
@CheezyDee
@CheezyDee 5 жыл бұрын
Meh, I clean it anyway with regular TB cleaner. What's it going to do, rust?
@IIGrayfoxII
@IIGrayfoxII 5 жыл бұрын
@@CheezyDee Knowing ford. YES
@apexkeeper
@apexkeeper 5 жыл бұрын
@@CheezyDee They start developing problems with sticking once the coating is removed.
@mig21m13
@mig21m13 4 жыл бұрын
This is classical for "das auto" cars, full of oil inside of throttle body.
@justsurf3328
@justsurf3328 3 жыл бұрын
I liked the video. Clear and good sound.
@markreynolds3850
@markreynolds3850 2 жыл бұрын
Thanks for sharing this video,nice job
Should you clean your Throttle Body and How to clean it on Toyotas
18:07
The Car Care Nut
Рет қаралды 1,4 МЛН
How to Fix a Car that Idles Poorly (Rough Idle)
13:52
ChrisFix
Рет қаралды 4,5 МЛН
Sigma Girl Education #sigma #viral #comedy
00:16
CRAZY GREAPA
Рет қаралды 86 МЛН
CAN YOU HELP ME? (ROAD TO 100 MLN!) #shorts
00:26
PANDA BOI
Рет қаралды 36 МЛН
3 Things That Will Make Your Engine Last 500,000 Miles
13:50
Scotty Kilmer
Рет қаралды 358 М.
Bad Throttle Body Symptoms-Some Sure Signs Of The Problem
4:09
Despair Repair
Рет қаралды 43 М.
How To Clean Carbon Off Your Engine!
13:58
Deutsche Auto Parts
Рет қаралды 1,8 МЛН
How to Clean an Electronic Throttle Body Safely
4:36
FordTechMakuloco
Рет қаралды 2,2 МЛН
The BEST Way TO Perform a Parasitic Draw Test
10:49
HumbleMechanic
Рет қаралды 4,2 МЛН
How To Clean The Throttle Body-Without Removing It From The Engine
8:48
Nissan 2.5 Liter (QR25DE) Throttle Body - Full Cleaning Guide!
10:18
Trick Shift Garage
Рет қаралды 65 М.
How to Fix a Car that Randomly Dies while Driving
3:59
Scotty Kilmer
Рет қаралды 2,5 МЛН
Пацан купил Мерс SL за 350тр. Но, есть нюанс…
1:23:45
motorbike invension napaka solid
0:31
JayR watawat tv
Рет қаралды 25 МЛН
Пацан купил Мерс SL за 350тр. Но, есть нюанс…
1:23:45