Van Builder's PRO TIPS: 8020 extrusions, electrical compartment design & fresh water tank fittings

(1) The more experience you get with 8020 extruded aluminum, the better your design skills will become. (2) Electrical components must be thoughtfully composed into some small spaces in a van. (3) Fresh water tanks can be a joy or a nightmare.
These are the Pro Tip topics discussed in this week's Humble Road video series. Subscribing now will insure you don't miss any future videos and it helps my channel grow. Thank you for watching Humble Road!
EDITOR'S NOTE
GOOGLE SEARCH: FRESH WATER HOLDING TANKS. BE AWARE OF THE WALL THICKNESS.
Easy Jam by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommon...
Source: incompetech.com...
Artist: incompetech.com/
Music: www.purple-pla...
#onahumbleroad #customtransitvan #customvanbuild #8020 #watertanks

[@HumbleRoad]

EDITOR'S NOTE: GOOGLE SEARCH FRESH WATER HOLDING TANKS. BE AWARE OF THE WALL THICKNESS.

[@Altenurgy]

Too late for me! I can offer personal testimony to at least several of this video's points. 1) I'm getting ready to deal with a wheel well fresh water tank that goes from concave when empty to basically bloated when filled. Since I did all of the dry fitting when it was empty (who knew?!?!?) and my plumbing station is already built right beside it some things need to be redone to allow for the changing dimensions. I'll probably end up supporting it with 1/2" Baltic birch "belt" to limit the expansion. 2) Thankfully it's all 8020 so while its going to take some time I won't be throwing anything out. Thank you for these videos.

[@vagibondremix101]

Do you have a brand or manufacturer of tanks that you recommend? I'm looking for fresh and grey tanks for an ambulance conversion.

[@fournier.benoit1993]

Highly informatiive as usual. Can you share your tank suppliers name or brand? Thanks.

[@kellstat]

Where is a good place to get this level of quality of tanks?

[@Snarge22]

Hi George, Who's the manufacturer of your water tanks? Thanks!

[@ChristianMediaLibrary]

yes please.

[@slackdaddy1912]

Sir, the RV industry must hate you. You give the DIYer a fighting chance of really doing a beautiful job with some pre planning and common sense. Can’t forget, there is an incredible amount of research. Thank You.

[@brianchetelat6601]

George, whose fresh water tanks do you like to use?

[@matthewk6731]

Hi George. Every video is a great learning experience. Thank you. What brand/brands of water tanks do you use? Same tanks for gray water too?

[@maitildamcintyre9344]

Love the modifications you’ve made to the mini me with the slide out baskets. Very space efficient design. If I had a van I would use the sink often for crockpot cooking while driving. Instead of having to cook after a long drive day you’d be all set and free to just set up camp or bed down for the night. The end of the video with all your editing trips was fun. Thanks again for another informative video. 🚐👨🏻‍🔧♥️

[@LJ-jq8og]

Genius George, in every way: Van design, video production, down to humor and wit ! 🙏

[@HumbleRoad]

Thank you LJ, I appreciate your kind words.

[@fredzuccarelli]

I had no idea Fleetwood Mac's John McVie builds vans now!!!! 😂😂😂😂

[@sifudan9244]

george what company do u get the thick water tanks from

[@michaelscarfi3196]

I asked this question years ago. He’s not giving it up. Lol

[@GaryThatsgary]

Thanks George, loving your content. Can you give us a clue what to search for to find those tank fittings with the grommet ?

[@TerryManitoba]

🍲🍲🍲Going on 5 years now - our Instant Pot has made many meals while traveling down the highway. (Very good battery management method) IP is gold for cooking the odd meal on the road. Gold I say❗❗❗ I think leaving options open to change your configuration is so important. Because you "will" want to change things & if it costs too much to do so or if it is to much of a hassle - you won't & you will put up and shut up - & for the love of god - that's no way to live life-:) Lets put the custom back into custom...

[@HumbleRoad]

AGREED! For the love of God, please don't tell me you cook macaroni in the Instant Pot!! 😩

[@TerryManitoba]

@@HumbleRoad No - I'm Keto - So Beef Stew is how we roll when we roll.

[@KentFleshman]

George, can you tell us where you sourced the water tanks?

[@ChristianMediaLibrary]

yes please

[@HeliFly1987]

Every tank supplier I've found so far has 3/16" thick walls. Far cry from 1/2". Would be nice to know where he gets his.

[@TOTALLYRELAXED]

Hey George! I simply LOVE how you do your video magic!…(well, I love your videos, too! 😂) that is, having interviews with yourself and jumping into different compartments of the van you’re building and more for example! I only wished I was as educated as you in that department! Great video as always, and, I wish continued success with your company…however, [and YOU know this] take time off from work occasionally and enjoy life with your wife! Thanks for sharing and have a blessed Sunday! ~Jim~

[@b.kepler4717]

So helpful! Do you put in an method to drain the tanks, like for winter storage? Not sure how if all the fittings on the top?

[@sifudan9244]

after 1 1/2 yrs of planning learning and getting all the needed items i’m about to begin my first build 3500 xd dually 170 2020 4x4 sprinter thank you for all of the knowledge i would of never of attempted this if it wasn’t for all your help i would love to do something for u if u ever need any type of healing we help people even the doctors can’t help i would love to help u as i feel like i owe u may god watch over u and bless you 🙏🏻

[@LilyWasHereMB]

I have the '19 model of yours; you're gonna' love it. FYI, mine is a plywood pro-build, which is nowhere near George level, and it cost $95k two years ago. I've since added ~$5k more. Tip: after build (a) get your wheels re-alinged (b) TPMS if not factory and (c) an appraisal.

[@sifudan9244]

@@LilyWasHereMB i’m at 160k so far and i haven’t started my. uild yet thanks for the tip about alignment the added weight would cause that i’m also doing a upgrade to the suspension once i’m done with the build for the added weight 👍👍👍

[@edm7356]

George, who makes the thick wall water tanks. Thanks

[@themadatheist1976]

Shame there's isn't a grommet system for the service port.

[@photomuse768]

I debated asking this because people can be mean. Why would you need to easily remove the water tank? Cleaning?

[@HumbleRoad]

Yes, sometimes the tank, if not cared for properly can develop a bad mold situation. Or if the integrity of the tank is compromised and it's leaking? These are rare occurrences, but if and when, you'll be glad we thought of you!

[@bwbrady8372]

We put the head of the bed on the driver's side because (generally) if you were to park overnight along side a road, it's more likely to slant downward towards the passenger side. Plus not sleeping with your head next to "central park", shields you from the light caused by your night-owl partner. Also .... because of your videos, we used 80/20, which previously we were unaware of. It's stronger than wood, lightweight, and most important -- bolted to the van frame. Thinking of safety in case of an accident. You don't want your cabinets launched into the cab. Thanks for that.

[@chriscoulthard4947]

I have a secure lock on my cutlery draw for that reason. No flimsy caravan catches. You don't travel in the caravan.

[@markmauro2569]

Truly custom, as advertised = Intentional listening, genuinely caring about what your client wants. Nice.

[@HumbleRoad]

Much appreciated!

[@LilyWasHereMB]

If other van builders put as much effort into their builds as you do in your video production, you'd be ankle deep in competition George.

[@HumbleRoad]

Well, let's keep that between you and me...😉

[@joseville]

Great video as always! So informative! Adding some timestamps. 0:00 8020 skeleton 6:30 Mini-Me physical plant (electrical) 12:23 water tank tutorial

[@joeyfren1748]

Where can we get those water tanks? George, you’re doing great work.

[@ChristianMediaLibrary]

yes please

[@joshuawilliamson7672]

I own a E350 would you be willing to build the inside design?

[@andrewjohntomko]

You’re the Bob Ross of Vans - can listen to you all day!

[@carolinefreeebyrdacw13ly]

Hello. I am so impressed with your attention to detail. Could you please provide the manufacturer of the tanks you use? Where you get them. I've been looking for a thick walled tank and can't seem to find one thru Google search. Much appreciated dear sir!

[@ChristianMediaLibrary]

I would like to know this as well. What is the tank brand?

[@CLdriver1960]

I’m one of the minority ‘mini-me’ owners who sleeps with my head right behind the driver seat. Good idea about the baskets for the mini-me, that’s exactly what I use.

[@hooperv]

Nice video. What type of sealant are you using on the inspection hatch? Are you using 5200? Thank you.

[@HumbleRoad]

4000

[@hooperv]

@@HumbleRoad thanks

[@rudivandoornegat2371]

Today I learned something new about water tanks by watching this video.

[@benjamin2677]

Humble Road productions, thank you for all the the valuable info

[@Tony-um2el]

And Pistol makes an appearance. What a van family you have started.

[@HumbleRoad]

And you are a part of that family! 🙏

[@Tony-um2el]

@@HumbleRoad Thanks George

[@FromShetoMe]

Love the mods in the Transit.

[@HumbleRoad]

I'm beginning to understand that Transit...She's got some hidden potential.

[@leonardcroft1467]

Hi George Always Enjoy Humble Road Videos Love Your Van Build Process !! Thanks

[@OurThrivingLife]

Thanks for this video, George. Can you tell me the brand of the rubber grommets and where you get them? I've searched Google and can't find anything smaller than 1-1/2". I'm looking for a 1/2" or 3/4" for my supply line to the water pump. Thanks!

[@ptivnan]

I've been looking for these for a while and I think I found what he's using. Lookup "Uniseal Flexible Tank Adapter", "Flexible Tank Adapter", or "Bulkhead Flexible Tank Adapter" and you should see a lot of options in different sizes from various retailers.

[@YT-MY]

I would make a way to level the bed frame. I would think a couple of inches of adjustment for N-S and E-W could handle that majority of parking lots, streets and camp grounds. This should be easier than blocking the wheels.

[@HumbleRoad]

I'm listening.

[@YT-MY]

@@HumbleRoad could be a slotted bracket or telescoping leg with a L handle twist to lock, similar to Lagune table support. I like the use of IKEA flex slats with a metal frame. Allows tuning the support along the length.

[@Miggy311]

I like the idea of the access hatch. What size access hatch do you normally use and where do you buy them? I’m about to install my water tank and would like to add the access hatch before I mount the tank.

[@atcbelle]

Love, love, love all the videos. Thanks for inspiring us to work on our own rv. We also wondered about the water tank company you use. We need a larger tank with baffles. Thanks for all you do!

[@LivingSmallLivingMobile1]

Awesome videos and builds. I do have one question: I haven’t seen a gray water tank in any of your videos. What do you do for gray water storage?

[@HumbleRoad]

kzbin.info/www/bejne/j3bHi3-YfdOgi6M

[@RJGilman1967]

Love the video, -"crockpot in sink while driving" brilliant thank you. I haven't heard that before.

[@HumbleRoad]

You're welcome!

[@perrinfarms913]

production value in build and video top notch as usual. Question about the insulation. Some White facing out some black. Is there a reason for this?

[@HumbleRoad]

First layer of Thinsulate; black side adhered to van chassis. Second layer of insulation, flip it so the layering is white to white. That's how we know which bay still needs the second layer of insulation. If we see white, add more!

[@susanscovill6817]

Unless my price point is drastically reduced, I’m going with 8020. I think the term you were looking for is, ‘built like a brick schnitzel house’. LOL What thickness should I be looking for in the fresh water tank George? cheers from Canader eh!

[@LynnRPerry]

I don’t use baskets but I use plastic restaurant food containers with lids. They come in lots of sizes, are light weight ,and they really hold up well. They stack and clean easily and are excellent quality. You can get clear ones but eventually they will scratch. I use a restaurant supply company called KaTom and a plastic product called Cambro.

[@Jeff-gq2tq]

Thanks George - great to watch a genius and Master Craftsman at work.

[@HumbleRoad]

Very welcome

[@craigj6277]

Hey George, how do you attach the 8020 to the floor after you’ve already installed the flooring? I doubt the structures are only attached at the sidewalls. Thanks for the videos, your channel is very informative and entertaining!

[@HumbleRoad]

The modules are screwed into the 3/4" plywood floor as well as bolted to the vehicle chassis walls.

[@julianm5333]

Jorge (HOAR-HAY), any youtube yachtbuilding channels you like?

[@gregoryharris8381]

I love your builds and and I know they are very very expensive but I love what you do you I wish I had the kind of money to get you you know to help me build one or or you know buy one from you I wish I had that kind of income but you you doing a great thing God bless you

[@lindalawson4296]

Thank you for the edutainment!

[@HumbleRoad]

Any time!

[@Greybeardmedic]

Re: Bowed water tanks If you are having trouble mating your flange to a water tank that is deformed, or flexing you could consider using some spreader clamps inside the tank to get the tank back to square. You should be able to get the flange glued and set that way. Although some extra screws might be in order to prevent the seal from coming unglued.

[@HumbleRoad]

Good one.

[@mikekendig6781]

Hi George, I try to watch each of your videos Sunday morning as part of my Sunday ritual. I must have missed the one where you explained how partitions and such are attached to the 8020. Can you point me to that video or show us how you do that. Mike

[@vita-girl4345]

Great tips on water tanks too. I’m about to install mine, perfect!

[@HumbleRoad]

Glad it helped, see you on the caravan across country!

[@JogBird]

how do you accommodate 29er handle bars, theyre so much wider than road bikes??

[@HumbleRoad]

The forks will be turned 90 degrees. Custom bike clamp similar to a roof mount.

[@turnpike420]

I ride a 29 XL frame mountain bike. It’s big. I’m building a drawer to hold 2 bikes, but not turning the bars 90. The drawer tray is already 60”! And with a second bike offset so they fit tightly side by side, the rear wheel hangs behind that 60” by 8.5”! My handlebars are 780mm wide. A downhill mtn bike could be 800 or larger! I’ll have some kind of similar setup to my bike position as George has here, but I’ll have more room against the passenger wall for components since I have to bring it more toward center so the handlebars can clear the D pillar., so that space will be electric or water related… or storage. TBD.

[@turnpike420]

Oh, I will be front wheel taken off to attach bikes to tray using MBP fork mounts.

[@mferrarorace]

TY George. I am so looking forward to a mini finish. Will be interesting. Stock up as I'm sure you have thought, trucking situation may change very soon!

[@teamhaselmyer]

A thing of beauty 👍😃👍 Quality craftsmanship & experience 😃

[@mjremy2605]

10:40 - Head position in MIni Me van. There are two reasons I would agree with the majority view of head position inside not near seats and open doors: 1. Feng Shui dictates you face positions of vulnerability which are doors or entrances. You do not place your head at the door so you cannot see who is coming in. This is a primal security need. In all Feng Shui layouts, the sleeping head is positioned such that they can see who is entering the inner sanctum. This also applies to office chair positioning. You cannot work with the door to your back. Anyone entering will make you jump, and you feel very exposed and vulnerable. You need to face the door /entrance to your office. This is why, it is so hard to concentrate in open office designs - they don't work. You don't feel safe on a primal level. 2. Electrical components need to be at least 3 feet away from your head. Your brain works at 60 Hz, and so does the 110V AC electrical sockets. Not sure how this works with DC power, but positioning a head over the electrical components for 8 hrs every night is a huge no-no. It will buzz the brain. Proof of that are studies done with autistic children who fare better if their heads are 3 ft away from any wall sockets.

[@K9TPT]

Hello George, Great job as usual. What is the width and length of the mini me sleeping area? Thank you

[@jamesmatthews4840]

I’m not sure why you would need a check valve. I build various mobile units and have found that, depending on the pump you use (in our case we use Shurflo 4048 pumps) they have a built in check valve, thus not needing an extra check valve that may restrict your water pressure even more… Just an observation. Great video once again!

[@HumbleRoad]

Think about the vertical pick up tube coming up out of the tank. A check valve inside the pump does nothing for the water in the pick up tube.

[@HumbleRoad]

Now that I think about it, the check valve in the pump would be on the output side. Or.. the impeller acts as a check valve. I'm talking about the input side of the pump.

[@jamesmatthews4840]

I’m fairly certain the check valve must be on the pick up side, we’ve never had an issue where the water would drain back into the tank, or the pump working to build back pressure after a period of time without use. We have always had water readily available once we turn on the tap without any additional check valves. I suppose if you wanted to add another safeguard you could put a foot valve on the inlet of the tank. But as mentioned, these pumps are small and the added valve will restrict water pressure in my opinion.

[@HumbleRoad]

@@jamesmatthews4840 I am definitely going to test your theory, James. It would make service and maintenance much easier. That’s my middle name! Thank you!

[@Greybeardmedic]

George! A few years ago I once commented that I did not think that you had created enough support for your roof fans. Unfortnately I was not able to adequately describe with words alone what I meant by distributing load to structural members, and the convo faded away. I want to say now that I love the support system you created with the angle aluminum! That is a real support structure and its tied in to the support beams of the van! Nicely done! Very impressed sir, very impressed.

[@HumbleRoad]

Thank you Eric! As you could see in the flyby, the 2x4s will be the pick-ups for a "down the center of the van" tongue and groove panel shiplap treatment.

[@12vLife]

I agree 100% with your comment about baskets and cubby holes. Most People complicate their DIY builds with custom cabinets and drawers when really a cubby basket design is the the most efficient design. I also think people buy way too much van and that limits where they can go and park.. I have a friend with a big van and 95% of the time he's by himself in the van and he has to have another car because he can't even park the van in most spaces and garages. I have a tiny van and I manage to fit a big e-bike inside - I can park and go anywhere I want, and if I need to it sleeps two comfortably with the bike chained to my bumper outside. I'm also partial to switch blade designs where the van has a day and night configuration. I think it's also important to draw a distinction between sleeping in a van and living in a van. In Florida (IMO) one does not live in a van, one lives outside and sleeps in a van - so any van I build will require cooking, eating and showering outside of the van so this changes the biggest perameter and cost in most vans.. height of the van you need. I've never had an issue finding a private spot to back my van into to do these activities - and it's 1000 times more comfortable no matter how big your van is. Design a van to cover the critical 80% and when nature changes your plans work around the other 20%. This means some days you might need to spounge bathe, eat cold canned beans or sit in a coffee shop for 4 hours watching cat videos. Use all this new found down time to learn new skills or run an online business instead.

[@deepsea5107]

Another great video from the Master of ProMaster builds! Just another option for installing the check valve on your water pump: you can also install it just before the pump inlet vs installing it in the tank. It will still hold prime. The principle is similar to immersing a straw into glass of water, placing your thumb over the top hole of the straw and then removing the straw from the glass of water. The straw will remain full, until you break the vacuum by taking your thumb off the straw. This is a pretty common practice for electric pumps on hand dug and driven point wells.

[@HumbleRoad]

Thanks for that suggestion. It would make maintenance much easier.

[@turnpike420]

Wouldn’t this theory work without a check valve with just the pump? I think the Remco folks told me I wouldn’t need one suggesting it does just this. If the pump has a vent of some kind, the theory is out and the water will fall to gravity. 🤔

[@HumbleRoad]

@@turnpike420 it all started with the Vagabond van. First with a pick up tube. Check valve fixed the problem.

[@shirjoin]

George, are you familiar with a gadget called a “freeze miser?” They fit on the end of a faucet and when the temperature reaches the freezing point, they automatically start dripping water. No electricity needed. I wonder if there might be an application for them on a van. We have used them for two winters at our house and they do what they are supposed to do.

[@azurdo1948]

Do you know how to pre hole screens to install a pump in a polyethylene tank

[@AsTheTreeBends]

What is that fridge shown in the background? I am trying to find a fridge/freezer for my relatively small van (130" L2H2 transit) with a large section for freezing since I tend to meal prep frozen meals. It looks like that might be suitable?

[@HumbleRoad]

Isotherm

[@mart7404]

Thanks again George for these videos. It's also nice too hear about failures or reasons for shifting to a different approach. rock on

[@SmallVansBigWorld]

Yes, on the small vans having baskets are much more space saving than building in drawers!

[@KKhhoorrnniittee]

Awesome. The all-encompassing level of attention to detail appeals to me very much. I don't have any sort of car (nor am I ever allowed to drive one), but you got yourself a new subscriber.

[@HumbleRoad]

Welcome to Humble Road!

[@yv6eda]

It's so beautiful when people share it's knowledge! Thanks!

[@TheShadowVortX]

Hi! Top production! Again!! One doubt on insulation: having the upper cabinets' 8020 attached directly to the van's ribs, won't that bring the outside cold to the inside? Thanks in advance!

[@HumbleRoad]

Wherever the 8020 touches the van chassis, I put a HMV thermal break

[@StellarFella]

Some users of 80/20 aluminum will use two or more dimensions of it. I just wonder why you don't in some design applications.

[@HumbleRoad]

I use 10 series and 15 series throughout my builds.

[@Lsarsozo]

Hi George. Excellent video. Question, where do you position the drain on the clean water tank? You said that you make all of the holes on the top of the tank - including the drain?

[@HumbleRoad]

No drain. Use the pump

[@luismejia4505]

Thank you very much for that free school

[@adamsherman]

I noticed the Rixens reservoir in the picture showing the round Isotemp. Why use a hot water tank versus Rixens heat exchanger setup, for hot water?

[@HumbleRoad]

I use both. The heat exchanger steals heat from the engine glycol. I've done a few videos on my design.

[@adamsherman]

@@HumbleRoad Thank you for the reply. I’ll go find your videos on the subject.

[@adamsherman]

@@HumbleRoad Ah, I see you’re only using the Rixens reservoir. I was thinking about their complete heating and hot water system, which includes a diesel coolant heater and a heat exchanger dedicated to providing “instant” hot water.

[@HumbleRoad]

I used the Espar hydronic heater in my first build. Took care of hot water and cabin heat. I just didn't like the idea of firing up the furnace in the middle of August every time we needed hot water. Now, two separate systems are redundant, which is my middle name!

[@esparka]

The driver-side slider access for the electrical makes me ponder my no-slider-on-driver-side sitch on my PM. You literally have me pondering if an access hatch could be cut into that side. I probably would never do such, but damned if you don’t have me pondering again. Thank you,

[@HumbleRoad]

...said the ponderer to the ponderee...

[@fitter70]

Do you add anything periodically to your tanks to prevent bacteria growth?

[@HumbleRoad]

Bleach

[@fitter70]

How much? How often? Thanks.

[@argates6507]

Basket storage for the mini-me is a great idea, but I would suggest putting some kind of lip on the floor so that you have to pull up about an inch before you can pull out. Makes left turns at full speed a lot less interesting.

[@HumbleRoad]

Good point!

[@mikefranks4528]

Hi, George. Great video as always. Love hanging out with you. Quick question: For the water tanks, what minimum wall thickness do you recommend?

[@joseville]

13:45 The tanks in the video are 1/2" thick.

[@Bobbyisgoingsailing]

Hi George! Love all your videos. I noticed you cut the holes in the tank on the side with the baffles. The question I have Should the baffles be on the bottom or top of the tank? My thinking is the baffle should be on the bottom to reduce slashing.

[@HumbleRoad]

That tank had baffles on both sides

[@SouthCanadian]

Looks like you may be able to shave off 1"-2" of Mini-Me bed height and still have enough room for systems. That'll give a little more headroom.

[@HumbleRoad]

WE ALREADY DID THAT! We had to wait for the actual components to arrive to be sure of measurements.

[@Iamandthatiam]

so what's the point of not sharing name of those recommended water tanks?) I mean that's the weirdest when these influencers doing this intrigue or whatever is the reason.

[@HumbleRoad]

I'm running a business here. I have spent countless hours evaluating, testing and procuring these components for Humble Road van builds. In my videos; I give away much in the way of technique and building tips. But I can't give away the whole enchilada!

[@vita-girl4345]

Thanks for the top on the crockpot. I’m totally getting one now. Btw, I want to join your caravan later too.

[@maitildamcintyre9344]

Me too Vita-Girl🙋🏻‍♀️

[@nfr3416]

Why no wheel well water tanks ???

[@HumbleRoad]

I feel they are too limiting, whereas they must go over the wheel wells. I can make better use of the wheel well area in my designs.

[@jamestreanor182]

If you are undecided, lol 😂

[@Iamandthatiam]

What none about food grade plastic on the hatch that will always be in contact with water

[@HumbleRoad]

You are correct. I would compare that exposure to less than bottled water.

[@JohnDoe_toetag]

Welcome back from”hiatus”. Thank you for all you do.

[@HumbleRoad]

Our pleasure!

[@turnpike420]

George, you seriously made my day!🤣🥰 “toilet options” 🤣🤓 it’s so you!🤘🏻

[@HumbleRoad]

Toilet time is an important part of my day...

[@loda9510]

Quality control in the details!

[@gtg356y]

What are your thoughts on those special tanks meant to fit over the wheel wells?

[@HumbleRoad]

I can make better use of that space, and provide more freshwater capacity elsewhere

[@Rockn247]

the most waisted space is the side door entrance. why not make a shower stall walk thru there ?

[@HumbleRoad]

There's no walking through a Mini-Me! Are you thinking full-sized van?

[@lindahardy8713]

KZbin “Louis the Van” has a shower in a promaster. Look for “VAN TOUR | HIDDEN SHOWER from a “year ago”. Actually Nov 2020. I’ll post a link but YT will likely delete it.

[@dougfinstad7629]

George, what do you use for a "Food Safe" water level sending unit? All the ones I can find don't indicate food safe and the sending unit float is black plastic, which I assume to not be food safe? Thanks! Love the videos!

[@HumbleRoad]

KUS

[@dougfinstad7629]

Thanks George@@HumbleRoad

[@elizabethm7552]

Why not use 1" 80/20 for the interior cabinet dividers? Do they work together? Also: you're kind of an obsession. You make it make sense. Bless.

[@charlie63-p2u]

MiniMe - Zero Breeze Mk 11 - small enough to stash. In an insulated minivan size platform it would probably work well enough to take the edge off humidity and heat overnight. Power consumption, maybe pack an extra dedicated (Zero Breeze) battery pack??

[@GuumisGuumis]

I like this method when you can reconfigure layout a lot easier. That's why I think using aluminium section is better than wood. Having said that can you explain how you deal with cold bridge where you fix aluminium section to your van? Wouldn't that transfer outside temperature inside your van?

[@HumbleRoad]

Wherever the aluminum touches the van chassis, I place a strip of heavy mass vinyl to act as a thermal break.

[@GuumisGuumis]

@@HumbleRoad How does it compare to having thick insulation in adjacent places? Won't it still create condition points in cold climate? As I mentioned I really like the concept but this worries me a bit 🤔

[@HumbleRoad]

Don't worry. It works just fine. Not one of my clients has froze to death, nor passed out from heat exhaustion. 😆

[@ApteraPioneer]

My favorite van builder by far! Everything makes so much sense. Once the E-Transit gets enough range to be practical (or the E-Sprinter becomes available), this is how I will convert it, ideally after an apprenticeship at Humble Road;)...

[@effie2206]

As always some great tips, hopefully Ford will build my Transit before I forget it all.

[@HumbleRoad]

I recommend that you watch my videos over and over again! 😎

[@avlisk]

I can't find a new Transit, a new Promaster, or even a Winnebago Solis (my 3rd choice). There just isn't any product here in 2022. I've got a storeroom of items waiting to be installed, but nowhere to install them! Frustrating.

[@duncanbrown7160]

Do you need to think about a break in the long 8020 runs? I’m thinking about a rear shunt and skewering the front seats? Maybe have a break or 2 so the 8020 does not get pushed forward like a spear? Love the videos, so many van builders could learn from you. Please keep up the great content.

[@StellarFella]

Pull-out pantries are ideal for spices, canned goods, and cereals that have been transferred into square or rectangular containers. Thought engenders evolution in all aspects of design. User feedback is priceless. Sometimes you'll wake up in the middle of the night with a Eureka solution. Or think of something while you are going to sleep. It is all so enjoyable to witness all along the way. Thanks for sharing all of your innovations and discoveries.

[@traveldreamer4616]

Your video quality is superior. George, humor takes your content to another level. Quality van builds and quality content.

[@yarigainsbrugh9507]

What about an on- demand water heaters. Are they a no - go?

[@HumbleRoad]

I put an electric on-demand water heater in my minis and Metris a real power hog. I do not like them.

[@kalleenmerrill3774]

“Options”. You’re speaking my language. God Bless You.

[@Stewbular]

I can