Husband & Wife Make a Resin Tumbler for the First Time

[@EvanAndKatelyn]

Ahhh we’ve been working on a revamped merch store for like 6 months now and can now offer new fun stuff! Embroidered items (hoodies and joggers, sticker sheets (with new Joob in space design), cropped hoodie/tee, and more comings soon at shopevanandkatelyn.com

[@UnderCoverBudgie]

Hello! Just wondering, will the old store also be kept open? Or is it only open while supplies last? Also, I hope you are both having an amazing time at twitch con and I will be cheering for you (virtually) on Saturday!

[@wilibee4360]

Great job 😀

[@datgaydangernoodle1315]

Week three of asking for a baked bean toliet seat!

[@Cattissosilly]

yey

[@kronicwolf9944]

I absolutely love this video. The composition, the chaos, the cup..XD . But I would love to see a 100 layer resin Joob statue/ statuette !

[@binkusbonkus]

the "science adjacent" segment is a trip because it showcases not just the old house, but it also includes THE ORIGINAL GARAGE with the cupboards (in the song). Loved it. kinda wild how far y'all have come!!

[@balicard00]

And for a bit of continuity Evan is wearing the same shirt

[@moji3812]

@@balicard00 true👀👌

[@kyleejenkin8609]

Amazing job guys! My first tumbler was a dumpster fire compared to this one! The little pockets you were experiencing are called “fisheyes” and they happen where the resin is being repelled in tiny places. This can happen from fingerprints or oil in your skin from holding the tumbler, or even just small imperfections in the spray paint. Next time (we both know there will be a next time!) try wiping your cup down before each layer of resin with Isopropyl Alcohol or even Acetone. This will clean off any contaminants and help ensure a clean surface and help prevent fisheyes.

[@laurenjerzak8526]

Also sand the resin before the final layer to have a nice smooth surface

[@kennakamfonik3941]

I was just going to say all of this! I’ve been making tumblers for over a year. Also one thing not mentioned is use satin or matte spray paint.

[@EvanAndKatelyn]

Oooh great tip thanks!!

[@iseetheWAYVision]

Love this advice !!

[@MCS91013]

Definitely helps to sand between each layer. Also reduces clean up to plug the top during resin process (taping the inside rim works too.) There all kinds of option you can buy or make. I’ve used both wood and a piece of foam insulation board I already had cut to the inner, top diameter then a hole in the center for the pvc pipe. After all the resin cures, sanding the top rim is the easiest. I like to even sand about 1-2mm around the top off before the final resin coat to make sure the resin has a good, rough surface to grab onto and prevent the risk of separating/chipping off on that edge later. I’m also impatient so I use quick setting resin for the under layers and then use a regular archival resin with good UV protection for the final coat. 😊

[@cori0420]

Now Katelyn needs a red fuzzy velvet cup to match her nails and keyboard lol Also 100 layer resin cup, rainbow, different glitters, mica powder, alcohol ink, everything y'all have, rainbow gradient using spray paint, with another "hidden" decal with Jube ❤️

[@rxdxl]

YES

[@fayre19]

I was also going to say this if no one else did 😂

[@tuesdaywithanh]

13/10 idea, i really want to see it ;)

[@seriokan2971]

Don't forget the red fuzzy velvet toilet seat.

[@kaykay9240]

omg yessss

[@chargeit7897]

Watching Evan laugh and then stop, and begin to look scared is the most hilarious thing I’ve ever seen.

[@CasondraM]

Oh my gosh, the prank she did with drinking the 'paint'...!!!! I'm dead!! I love the editing as always, it just gets better and better!

[@HyperWolf]

Evan’s face got me. It’s perfect how you can pinpoint the exact moment when he realized it was the same container and for a second believed she was drinking paint. 😂

[@auryangus6303]

Imagine she drank the wrong one 😂😂😂

[@EvanAndKatelyn]

I was so nervous to prank him I could barely contain the giggles

[@HyperWolf]

@@EvanAndKatelyn I feel like knowing this makes it even better.

[@brontezaf9210]

I love that it's one of the most replayed parts of the video because I feel like we were all like - "HOLD UP.. did she actually drink that?! Lemme go back a few seconds" :'D

[@Sanrio2]

The Evan and Katlyn sponsors are the only sponsors I never skip

[@katiepetersen7489]

Let us not forget how careful Evan was when he fell through the ceiling :)

[@CalliEdwards]

I was looking to see who else was thinking the same!

[@EvanAndKatelyn]

Never forget...

[@RoseDragon529]

My dad is OBSESSED with making tumblers He's cleaned out the local Goodwills and thrift stores It's madness

[@corakat6439]

The video just barely started and I can already tell it's going to be awesome

[@liasherwood1230]

It's Evan & Katelyn, of course it's going to be awesome.

[@katekucharski9208]

Same lol

[@l3sb1antr1c3rat0ps]

Ofc it’s Evan and Katelyn duh 🙄👌✨

[@Shyknit]

the omg sound effect got me lol

[@ThePsytripper]

How many people here don't have any interest in doing arts and crafts, but just really like Evan and Katelym (and the stuff they do\make)?

[@FullMoonOctober]

This reminds me of the free coffee mug my grandma got from her eye surgeon when she had her cataracts removed. It was an eye that had a white film over it when it was cold, but when you poured hot liquid in it the film turned clear, and the full eye could be seen. I always called dibs on that one when we made coffee or hot chocolate. This is way cooler, though!

[@gr33ngirlsea]

That's brilliant marketing for a cataract surgeon!

[@SpencilPen]

For the 100 layer resin cup you could drill certain parts of it like jawbreaker nails.

[@cortburris9526]

If it's thick enough, you could even drill a hole all the way through the resin to make a handle.

[@JeanaBarry]

I’m obsessed with the Joob tumbler! And Katelyn’s incredible editing! Ya’ll really go above and beyond for your sponsors!

[@EvanAndKatelyn]

This one was actually edited by one of our editors! They're so good! Really glad you enjoyed it :)

[@evelynveritas]

Evan, I've made resin tumblers, a second coat for chunky glitter definitely helps! So happy to see you guys finally make a tumbler. Your the reason I started using resin, I'm always really looking forward to seeing what you think of! 100 Layers of resin would be kinda crazy, and cool. I too have a lumpy cup, it's got about 6 Layers on it. It's a bit chunky.

[@christopherkarr1872]

Ever tried applying the chonk glitter directly to wet clear-gloss spray coat? I'm wondering if that might reduce the resin layer thickness and improve the interaction with the liquid crystal element. As their clear-coat thickness went up, the thermal conduction/gradient went down.

[@evelynveritas]

@@christopherkarr1872 I have actually, the paint dried a little too fast for the glitter to stick, when the resin was applied the glitter started float in the resin. It was fun to watch. Putting on clear resin and pouring different glitter over and watching them blend for a galaxy effect is super mesmerizing

[@christopherkarr1872]

@@evelynveritas Thank you for the quick response! Sorry I ran off too quick to see it. :) Alas, maybe a clear-drying spray adhesive would be a better option. Science adjacent time!

[@EvanAndKatelyn]

Thanks for the resin tumbler tips!

[@aqualatte7500]

Make a 100 layer resin book end. Make it in one big block and then cut it in half to make the two book ends. With some LED's

[@kandykassy]

It came out sooo cool! Great job you guys :D A little pro tip for the vinyl: peel the white backing away from the transfer tape (instead of peeling the transfer tape + design away from the white backing)--it's a bit easier that way to make sure that those small little details stick where you want them to!

[@stephrogers5491]

This!! And maybe a less tacky transfer tape. Most regular adhesive vinyls need a medium tack. Specialty adhesives do like a high tack. Not sure which y’all use but it looked super tacky.

[@kandykassy]

@@stephrogers5491 Yes! My favourite hack for this has been using painter's tape (or masking tape). It doesn't stick to the vinyl as strong as transfer tape does, so it's such a breeze when you're trying to remove it. Even those tiny little pieces don't give me problems! It's been a total game changer, honestly.

[@meganmoore1175]

I’m extremely unwell right now and can’t even look at my phone without blinding pain, but when I got the notification that a new video was out I fought through the pain and smiled. This has made my day, I love you guys so much you honestly make my little heart happy, keep crafting!

[@duck1590]

Hope you'll feel better soon ❤️

[@bellarose2323]

100 layer resin image. make a picture of like a nature scene but all in resin, so you can use the layers to make it kind of 3D! That could be fun. =)

[@theyaremycrocs6009]

Katelyn pondering evan's chaos is the best thing I've seen all day. 100/10 much chaos

[@johanschneiders6293]

The editing was PERFECTION too. Also, I love your username!

[@wandaXmaximoff]

Looks amazing. Honestly surprised you haven’t made custom tumblers before, it totally seems like your type of thing.

[@jimmerseiber]

When Katelyn said "I already said you have the coolest cup" I died 🤣 her express. Your videos fill me with so much joy. I really hope I find my person one day as you all have so obviously found yours. I know this is parasocial but your dynamic as a couple is just as much the content as the rest of the planned content..it's what keeps me coming back for anything you guys ever release!

[@EvanAndKatelyn]

❤❤❤

[@vidhoard]

Evan's face when you drank the "coffee" was hilarious! So much cognitive dissonance!

[@moonbasket]

Honestly got me for a second too lmao.

[@EvanAndKatelyn]

Haha definitely cognitive dissonance! My brain knows that Katelyn is smart and careful but it was also telling me WARNING

[@vidhoard]

@@EvanAndKatelyn haha exactly! 😂

[@TruthIsTheNewHate84]

Reminds me of a prank I did where I drank blue food coloring and water out of a cleaned Windex bottle. My wife thought I lost my mind.

[@alyssaferry600]

My mom and I also became addicted to custom tumbler making and now it's our fun side business! It's seriously so much fun! E&K did a great job on this!

[@Cattissosilly]

You both went above and beyond with it this time! From the editing to the end product, it’s all great!

[@kylieshoffner9671]

honestly you’re the only channel i don’t skip over paid promotions bc you make it so damn entertaining

[@Madi_Miso]

Yes! 100 Layer wooden or plastic object so you can cut it in half like Evan said. excellent idea!

[@aicirtkciub9167]

I love how the magical mood rings of the 70's have transitioned into so many cool things!

[@Narja23]

This cup is really cool! And i actually enjoy seeing you protecting your breath system with a ventilation system while working on these! So many people don't, and i cringe each time i see someone working indoors with resin without any protection

[@mariontheantiquarian7849]

Me too!!

[@angieemm]

If you decide to do another one, I'd look into a tutorial from awhile back by Makers Gonna Learn. They tested a bunch of different ways to get the best results. I've tried it their way and I'm happier with it that way, rather than having resin all over the bottom of the cup. Or having to trim the top!

[@xoxolaurynwuvsu]

Oh my goodness Katelyn such a good prank I had to rewind and watch it again.😂😂🤣🤣

[@itsboyinspace]

Gobstopper 100 layer resin cup! Use a dremel to expose the layers then do one final clear coat

[@cupidzsnakes6865]

Glad to see some improvement with the color changing crystals also I would love to see you put paint on the cup and spin it off at full speed to see what patterns are left

[@Hushvodael]

I'm new to the channel, and must say. Going from the older videos to these, I adore the confidence and comfort you guys have achieved through all of this.

[@runaway9236]

Been watching y'all for years and your still adorable

[@morapello13]

I've been watching a couple years and your commercials (and joob dialogue) just get funnier and better 🤣 thank you for the smiles during a hard year! ❤️

[@springroll6589]

For the 100 layered resin challenge, what if the resin slowly changed from the beginning of the rainbow to the end so when it gets cut it shows a gradient.

[@sofiarocha9907]

I saw a tumbler so pretty I started crying?! If I had the means I would DEFINITELY make one myself

[@ayrethd.3916]

Omg omg I can’t decide which I’m more excited about, the project or the new merch store!!❤️ I love having your videos to look forward to on Fridays.😊❤

[@EvanAndKatelyn]

So glad you like the new merch store!

[@WJS774]

Katelyn's outfit from the sponsor spot was amazing. 🤣 Also for cleaning up the top, I'd have maybe tried some very fine abrasive instead of a knife? Sand the resin etc. off then polish the metal underneath.

[@kaylaboland637]

KATELYN the mood ring paint drink was the absolute perfect prank, congrats, proud of you 💜💜💜

[@angefox4153]

absolutely in love with the editing Katelyn!!! its so much fun

[@PracticalArcana]

Have you thought about creating a 3D printed jig for the inside of the cup to also act as a shield from the spray paint and resin?

[@Drummerchef13]

Or super basic tape

[@terrarosa8181]

Wahoo! This is going to be a fun one. Hope you guys are having fun on your mini work vacation 😜 Lots of love from GA! 💕

[@ssylp5910]

I say this in every video but this is my favorite sponsorship spot 🤣😭 Was katelyn doing an Australian accent??????

[@catfoodzplz]

Katelyn holding the toilet cover and nodding at us was peak comedy for me, I’m dead

[@dolphin64575]

The video itself is amazing, the editor's contributions make it incredible. Katelyn's P-P-P-Prank is FANTASTIC, Joobie's "I need to get away from this accident" made me lol! I think E&K's parents might be getting custom cups for Christmas this year...

[@Sam-bx9zr]

The Evan chaos montage being not safe was incredible Also PLEASE DO A 100 layer video if you haven’t already, that would be awesome!

[@MacietheMini]

I love how katelyn just was like” OI CAn I hAVe SOME?” And evan already had a bowl on his lap 😂

[@ksoup_24]

100 layer resin idea! 3-d print a Joob, then slowly cover her in more and more resin, then cut in half at the end and see all the layers. use lots of color!

[@arsenic3382]

Why do you guys always do cool things? 🎉

[@luigipowdemo6458]

Because they're so cool. And funny.

[@arsenic3382]

@@luigipowdemo6458 that they are 🥳🎉

[@escapedgoat5865]

I think the tumbler turner is what made the smooth less spotty paint job but also skill and past experiences

[@macynbrotherton2010]

0:02 THE OH MY GOD KILLED ME😂😂😂😂

[@summerflint1310]

I NEED to see a Evan vs Katelyn resin cup battle

[@TisaTinkers]

As someone whose accidently drank my paint water before, the beginning of this gave me sooo much aniexty

[@EvanAndKatelyn]

ahhh oh nooooo!! ... what did it taste like?

[@luanamiyamoto1484]

That’s why I now only use closed tumblers with a straw… I trained myself to drink only from the straw while painting, and now there’s no paint brushes in my drink and no paint water in my mouth 😂

[@TisaTinkers]

@@EvanAndKatelyn pain and suffering. And really really bitter. 🤣

[@elzettefourie8921]

Envy, jealousy and etc. Is the reason why I learn new skills. So yes It is the best reason ever.

[@bloemundude]

Not everyone can say that their cup matches their toilet seat. I know there's an inappropriate euphemism in there somewhere, but I can't find it.

[@Toria2186]

After so much resin time, I'm glad they got tumbler making in

[@thegrumpymusician5009]

"Jeleaousy, envy, desire" Me: Say no more!

[@PolySpinal]

100 layer resin. different glitter in every layer. 3 dimensional glitter storm.( probable would need sparse glitter, from chonkiest to finest)

[@noiamhippyman]

You should cut a template that follows the curve of the tumbler. Then you could use that to make a perfectly smooth finish on future tumblers.

[@astrid3321]

I love this channel cause yall just genuinely want to make cool stuff. That’s what art is to me

[@amandanicole5401]

Honestly more entertaining than any of the hundreds of hours I’ve spent watching cup making tutorials.

[@jima1135]

I think Katelyn's 1 amazing prank makes up for her panic when it comes to pranks during streams. Quality > Quantity, and that was pure quality right there!

[@muttshouse]

I love the colors and results!!! Love that Katelyn pranked us all good! You guys rock.

[@redcrocs6367]

Idea for 100 layers resin! You make two cups, one clear resin cup and one with different colours, in the end you cut both cups in half vertically and stick clear and colourful together! That way you can see the resin stripes through the clear! Would be kinda cool, and no more tumbler envy 😂🥰

[@alligatorwithwings]

Okay but I would actually sit and watch you guys make resin cups for hourssssss

[@rjwedits_ae]

Y’all’s ads for your sponsors are the only ones I sit and watch the ya re so entertaining 😂

[@stephrogers5491]

Y’all did great for a first time. Highly recommend sanding and wiping down with alcohol between layers. Also. Let your decal sit on the cup for a few hours - just to make sure it’s on there before smearing on epoxy. 😅 heat gun helps to smooth out the epoxy while it’s spinning. Just some tips I’ve learned working for a vinyl crafting store! 😊

[@dowarnette]

Love the mood ring effect on the cup. An easier way to clean the inside is a magic eraser and the acetone. Even the weak nail polisher remover acetone will work and won't risk messing up the out side. I've even used the strong acetone paper towels, foil, and zip lock back to strip resin off of cups.

[@jeanine6492]

I hate the ads usually, but I love how you guys do your own ads. I always watch them and pay attention because of how creative you are. Love the videos too of course.😂

[@lburton874]

Anything that starts showing the mood ring toilet seat is a good one.

[@drunkdogartwork4016]

For fisheyes in the resin just sand it smooth and add a thin coating. Cleaning use isopropyl alcohol with a green scrub pad. Getting the outside wet with water will help protect against small drips. Good job on your first tumbler!

[@MikeD87916]

"I'm a super careful guy" needs to be new merch. Keep up the videos guys, they're always awesome.

[@z3r0n3ss]

You could do Resin dipping, like they do when making candles. But dip in different colors so some might bleed through a bit.

[@EthalaRide]

100 layer resin coasters!! Take a wooden dowl (or something cuttable) and build the resin layers up around it, then slice it up to make resin 'tree-ring' style coasters!

[@justchelsay]

Jealousy... Envy... Desire... I NEED THIS CUP! I NEEDS IT! 😍😍🥰🥰

[@jacksmancave170]

With all of the resin projects you've done over the years, I can't believe you never did this. Joob will be proud.

[@dwaynezilla]

_props_ to TotalBoat for sponsoring

[@jamesamell2231]

You guys have the absolute best ad skits, I never want to skip ahead in the video ♡

[@illuminuz]

The best way to ensure even coverage is to avoid smoothing resin back and forth. best to start from the middle then move to the end of one half then start from the middle and move to end of the other half then torch to warm it up a tad so it self levels again. And with tumblers, its always good to let resin sit about 3 to 5 mins after you mix so its not runny. If fisheyes or dimples occur (usually because you didn't wipe down with alcohol to get rid of oils and lint or dust), lightly sand between coats, and you should sand a thin line on the top rim to expose the coat below before the last coat of resin to ensure seal. Loved the cup design..You guys should do more with other inserts!

[@dragondungeon6986]

I would love to see a hundred layer resin marble or something where you start with a little bead and let it grow. Also honestly would love to see a hundred layer resin tumbler!

[@16letterd1]

i can't believe you conned me into watching an ad all the way through again!

[@Lisa_Flowers]

These videos give me an alarming amount of joy

[@mebinns1070]

For the 100 layer resin project try a wood vase. Layer it and then cut it on the diagonal when dry. You could sand and polish the edge and all the layers can be seen and it could still be useful.

[@MsWendalina]

I’m sure someone already explained this but those bumps/dips in the resin are called fisheyes. They’re usually caused by not allowing the spray paint to “gas off”. Although the paint feels dry to the touch after an hour or so, there are still chemical reactions happening, so it’s best to let it sit for at least eight hours before applying resin. The good news is that you did the right thing Evan: you just wait until the first layer of resin sets then add another layer of resin 😊 (Fisheyes can also be caused by the oils from your fingers if you touch the tumbler with your bare hands, but in this video it looks like they were caused by the spray paint ;)

[@beansieopiela4777]

Yes!! I have a 100 layer resin cup shaped hole in my heart, please make that video! I think whatever colors you do you should make them half opacity so you can see through them. It’d probably create some crazy visual depth

[@pandalion342]

ooh why is the mood ring stuff so satisfying to watch,,,,

[@puffymustash]

The Star Spangled Banner playing when the cup is finally revealed is so funny I loved that

[@polymathDIY]

So awesome, love the design! Small tip with vinyl and transfer foil: turn it around, keep the transfer flat and peel the backing away, just like you pulled the transfer away from the tumbler. Small details still might want to not stick to the transfer, but generally this seems to help loads.

[@Oonagh72]

Y’all did a great job!! To smooth the cup out you have to sand in between resin layers. With glitter if find it a lot easier to use the tack it method, or just mod Podge it. You can also hit the resin with the heat gun to help smooth it out. For my 100 layer of resin idea. Make a geode. You can put a plastic glass from the dollar store on your turner and start layering from there. Start with glitter for the Crystal inards and then build out!! Once you are done you can slice and go. I would not recommend using UV resin. Maybe use quick cure resin in a warm room. Like with your studio lights. You can use a plastic champagne flute. You can just adapt the turner so it will fit. You can the take the heat gun to melt it just a little so the center of the geode won’t be perfectly round. Eventually it will be.

[@christinaadams4187]

I added more after mine cured. My husband’s came out perfect, mine still needs a little help, but I did it a little differently than you guys, and my epoxy apparently wasn’t properly mixed. I’m taking my time to get to fixing it.

[@Sirens.Lullaby]

To help against worrying abt lumps, as well as help secure drinking safety while keeping the design safe (when washing), you could go for a double-layer tumbler (the kind w a sleeve) which could also enable different ideas re: floating glitter 👀👀 Imagine, tiny chunky glitter in the shape of space jube!!

[@DaimyoD0]

8:08 "Clippy says: Lawyer up!" sincerely made me spit out my drink. Just something about the threatening energy there. S tier editing on this episode

[@rjcarr5511]

I’ve been wanting to make custom cups for a while and I think this video was my sign to start

[@KLune92]

Little tip for weeding vinyl, use pointed pin type tool, and when peeling the backing off, lay it design side down and peel the backing off instead of peeling the transfer tape off like you did there, and the closer you keep the fold to the work surface generally the easier it will come off, by peeling off the backing like I described it helps reduce tear factor in intricit designs, as well as make it easier for thin/small pieces to stick to transfer tape. At least these have made it easier for me. I make all the stickers for the company I work for, as well as my own personal decals :D

[@Chocibunny]

I love the editing in this one!! the voting section,clippy and think emote were golden!

[@ItsAWanderfulLife]

I just want to let you guys know that I have been watching you guys for years Now and I took a little bit of a break from KZbin in general so when I came back and started watching yall's videos again I was like singing along to the resin time intro and I missed it so much!!!!!

[@shiasung6321]

Such a nice birthday present! I love the mood ring projects, they're so fun!

[@ChewieBabyTW]

Ohhh Evan and Katelyn Custom Tumblers! A great gift idea! woot!