Hush, Garage Door! How to Make Your Garage Door Whisper-Quiet.

Is your noisy garage door causing disturbances and annoying your family and neighbors? Worry no more! In this video, I will guide you through simple do-it-yourself tips and tricks to make your garage door quieter, providing a peaceful and smoother operation.
Amazon Links:
Rollers - amzn.to/46BMhWP
Shrink tubing (11mm) - amzn.to/4496phj
Double sided tape - amzn.to/46vhJ8V
Don't forget to like, comment, and subscribe to our channel for more useful tutorials and helpful DIY tips. Hit the notification bell to stay updated with our latest videos.
Support the channel on Patreon: www.patreon.com/user/?u=82149206
Cameras and Gear Used to Shoot This Video
Rode Microphone Kit - amzn.to/3W8FPBc
Gopro Hero 10 Black - amzn.to/3UcUk54
Iphone 13 Pro - amzn.to/3U7sffJ
Tri-pod - amzn.to/3gWaS3a
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
SECOND DISCLAIMER: Videos produced by Jay's How To Channel are provided for informational, educational and entertainment purposes only. Please use SAFETY precautions when following the tutorials on these videos. Due to factors beyond the control of Jay's How To Channel, we cannot guarantee against improper use or unauthorized modifications of this information. Jay's How To Channel assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Jay's How To Channel recommends safe practices when working with tools seen or implied in this video. Due to factors beyond the control of Jay's How To Channel, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Jay's How To Channel.
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/zoo/light-speed
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/hartzmann/sunny

[@geniferteal4178]

Every situation is different. when I first realized they were making quieter garage door openers, i wondered why. Thinking back to my childhood it was always helpful to know i had 30 seconds before mom came in. LOL.

[@JHTC]

:-)

[@williepelzer384]

How long does the shrink tube last?

[@williepelzer384]

So why are trying to be so quiet? Got caught leaving the house in the middle of the night? 🎉😂

[@williepelzer384]

So why are trying to be so quiet? Got caught leaving the house in the middle of the night? 🎉😂

[@len9213]

@@JHTC😅😅😅

[@Channelman3]

Just did exactly what you did on my single car garage, and the difference is staggering. My door went from waking the whole entire neighborhood at 5am to the smoothest door ive ever opened

[@JHTC]

I’m so glad it helped. Thank you.

[@HEYMLO]

I’m more impressed that this man can walk around a clean garage

[@JHTC]

(smile)

[@rickhadfield1097]

Lol

[@jeffj2495]

What is a "clean garage"....says me, whose garage is full of junk.

[@HEYMLO]

@@jeffj2495 its a mythical creature said to exist only in new homes

[@kendallevans4079]

Me also! Just getting to the tracks would be an hour of moving stuff!

[@danwebster5439]

I received a quote of $25 per roller to make my doors quieter with "silicone" rollers. My door already has nylon rollers as it is just 6 years old.. I declined and Im glad, now that I watched your video. The shrink tubing is a clever idea if it holds up

[@JHTC]

I installed the shrink tube over six months ago and they’re still in the same condition when I installed them.

[@jeffpitzer8521]

Another garage door tip not related to noise. Thieves will slide a coat hanger through the top crack between the door and the header and snag the release cord for the trolley. Once they're in the garage they have total privacy to to get your walk door open... If you remove the Tee handle from the cord they can't snag it.

[@JHTC]

or you could just cut the cord and leave it short. good advice.

[@darrellbrown8547]

I love opening the garage door, waking the person sleeping above the garage, early in the morning.

[@JHTC]

My Garage door still makes noise. It let's me know when my wife gets home.

[@789295]

One of the things I noticed in your video was the use of a chain drive opener unit. The chain drive units are the noisiest type. Either a screw or even belt drive opener will be much quieter and cause less vibrations. :)

[@JHTC]

Yea, I should have not used the opener. just disengage the opener and test it that way.

[@redbaron6805]

Excellent point, especially on two story homes where the master bedroom is often right above the garage...

[@mikewatson4644]

Or use a wall mount opener. Much quieter and fewer moving parts to maintan.

[@redbaron6805]

@@mikewatson4644 Wall mount openers have a lot of limitation as far as door type, door weight, are more common in garages with cathedral ceilings and have other limitations to consider. So, they are no suitable for homes that have the garage below the master bedroom which most 2 story homes have, and are considered less durable than overhead openers.

[@jeanvaljohn3921]

If this works , as you say, Its gonna be a life changer

[@jcrewguy123]

Nice idea on the pool noodles. The replacement nylon rollers I purchased also had the appropriate sized nylon sleeves for the stems, which should hold up better than heat shrink.

[@anthonyhitchings1051]

Step 1 = get a belt drive opener, this yields a huge reduction tion in noise

[@JHTC]

We had a side mounted opener in our last house. I was super quiet.

[@ronaldwoodruff4676]

Get a wall mounted opener.

[@darinkauffman1026]

Direct drive wall mounted openers are quieter, if you can imagine.

[@guywhite1004]

We had a belt drive opener that was quiet, but when we installed a heavier door during a whole house renovation the belt broke after about a month ( it was already about 5 years old). We were advised to go with a chain drive on the same opener and have had no problems with it after 4 years, and is only a little more noisy.

[@BrianWood74]

​@@ronaldwoodruff4676yeah, not buying a $400 garage door openers and spending God knows how much to rework the jank opening I have to make it work.

[@deanherrington]

Jay, I just finished quieting my garage door, as your genius video showed. I did run into 4-5 rollers that would not fit into the hinge after I added the heat shrink tubing. Even after cleaning the hinge with my .45 barrel brush and carb cleaner, then lubing with WD-40, I still had to remove about 2" of the tubing, then force/tap the roller into the hinge and It finally fit. My door is now amazingly quiet!! Many thanks for your video.

[@JHTC]

Thank you. 😊

[@Dogsnark]

Excellent video! Great ideas that I’m eager to try on my very noisy garage door.

[@JHTC]

Thank you, i'm sure it will work.

[@octopusfanclub]

WHOA!!!!!! The noise difference is WILD!!!

[@JHTC]

Thanks WKCIV!

[@gregnarez]

TY I used your links to order the shrink tubing and tape. I already replaced the rollers with the ones you suggested and already made a large difference.

[@JHTC]

Thanks, I’m glad it helped 😊

[@jimknowles5483]

Good job ! Well said !

[@JHTC]

thank you.

[@gibsonj5035]

Great idea! I think I'll try it! Thanks for sharing...

[@JHTC]

You’re welcome

[@Showup9000]

great info, I like the before and after.

[@JHTC]

Awesome, thank you!

[@GvMainberg]

Woww, I'm pretty good around all aspects of home improvement, but this one sticks out to me. Very good, thank you Jay!

[@JHTC]

Happy to help! 👍

[@GerryStilton]

Jay, that was awesome, thanks for the tip, subscribed!

[@JHTC]

Thank you so much.

[@bettygentry9672]

Awesome info!

[@JHTC]

Hi Betty, Thanks for watching!

[@johnduffy6546]

Great info. I really need to do this

[@JHTC]

Thank you.

[@321CatboxWA]

Well done .

[@JHTC]

Thank you. Hope it works for you.

[@jamestyrer6067]

THANKS FOR THIS INFORMATION

[@JHTC]

You’re welcome

[@latu8923]

Thanks for the tip, Jay! Excellent video!

[@JHTC]

You’re welcome Thanks for the comment.

[@Adabulldoya]

Definitely going to try this on the one in my parents house after I get super stoned

[@JHTC]

Lol

[@thebronzetoo]

This is cool! I wish I would've seen this before I replaced my rollers!

[@JHTC]

Thanks for the comment!

[@odiesclips7621]

Great tips!! Thank you.

[@JHTC]

Thanks

[@MrTimdtoolman1]

Great idea!

[@JHTC]

Thank you!

[@user-hm1pd2xi2l]

I tried your sugestions and most were successful. I have a new garage door on a two car size garage, so it is big and heavy. I live in Florida so the door is hurricane resistant too. I bought the materials that you suggested. I found that I could not use the double stick tape on the roller shafts. They were already pretty snug. I did use the heat shrink tubing and that was able to fit in but only when I let it cool down from using the heat gun. Lubrication of the torsion spring made the biggest difference in sound reduction. Thanks for posting this video.

[@JHTC]

Thanks for the comment. I appreciate you.

[@mikeedmonston3209]

Great tips man. Thank you :-)

[@JHTC]

Thanks for the comment

[@JIM-fj2dy]

this is positively ingenious. Thank you so much

[@JHTC]

Thank you

[@drozcompany4132]

You can buy heat-shrink tubing that comes with a thermal-melt adhesive inside already.

[@JHTC]

I didn’t know that product was available. Good advice

[@Cad1900]

Excellent thank you 🙏

[@JHTC]

Thank you for the comment.

[@Timsmo0th]

Huge difference!

[@JHTC]

Thank you!

[@engineermajidd]

You are a legend! great tips

[@JHTC]

I appreciate that! You’re so kind.

[@xordoom8467]

Outstanding

[@JHTC]

Happy to help

[@hermanmoore3301]

Very Interesting AND Different - Now I have use for my left over pieces of Pool Noodles

[@JHTC]

😊

[@IAMLoveBuilders]

Hey Jay this is Casper. Our new garage door is very noisy so I will be checking this fix out very soon. Thank you.

[@JHTC]

Thanks Casper. let me know if it helps.

[@717273mopar]

Thanks for the tip, great video, I did replace my ball bearing rollers with the nylon ones but I will try your heat shrink tip, will also see if I can find some insulation for the middle hinges. Thanks again!

[@JHTC]

Glad it helped

[@dwaynemcallister7231]

That is a impressive noise reduction, more than I expected. I have a belt drive and it is not so quiet but I guess I need nylon rollers and heat shrink

[@JHTC]

I hope it helps.

[@alanatkielski2572]

Use Rubber Electric Cord Strain Bushings between Motor and Metal Brackets to further Isolate Vibration. These Bushings have a Flange on Both ends And Hollow in the Middle. Isolating all Metal to Metal Contact is Essential to eliminate noise-vibration

[@susanpeterson9558]

Brilliant😊❤

[@JHTC]

Thank you!!

[@thomasnappo6309]

Well done😊😊

[@JHTC]

Thanks 😊 and thanks for the comment.

[@rayv43]

Best video yet!

[@JHTC]

Thanks Rayv43!!!

[@JHTC]

We’re you born in ‘43?

[@rayv43]

@@JHTC 1843

[@Calimero-1980]

I have a belt drive garage opener with the nylon rollers, but I still thinking is loud, so I will try the tubing on the rollers. Thanks for the video!

[@JHTC]

Thanks for the comment and I hope it helps.

[@Mr572u]

That pool noodle hack worked so well I can’t even believe it! Thank you!

[@JHTC]

😊😊😊 You’re welcome.

[@user-ey9lc9cv9g]

the world is safer place now. good work !

[@JHTC]

Hahaha, thank you.

[@Bama1963]

I just recently used the Owens Corning garage door insulation kit on my door, not only did it help insulate the garage it also made the door much quieter when it’s operating.

[@JHTC]

That's good advice.

[@daveward1484]

Lets see a followup after one year. I bet the shrink tubing will be history.

[@johna6850]

And the foam.

[@JHTC]

I installed all of these the last week of June 2023. My garage cycles 4 to 6 times a day. it is still in the same condition as when I installed. it. 11/8/2023

[@justin1978]

Great video. I’m thinking something like automotive ball joint grease would help keep the heat shrink from wearing out.

[@dalemacdonald201]

I think a lot of the noise that's still occurring after you added the shrink tube and the foam is from the motor attached to the ceiling. If you install a rubber spacer, you'd probably get rid of a lot more noise.

[@JHTC]

That’s good advice. Maybe I should shoot another video about that.

[@swimminwitdafishes8059]

I isolated the opener from the ceiling with rubber spacers. I don’t have a decibel meter but to the ear I didn’t notice any improvement. Didn’t work for me.

[@jcvord]

I had the same experience. It was a waste of time and materials.@@swimminwitdafishes8059

[@MakeitZUPER]

@@swimminwitdafishes8059 I use large truck mud flaps and cut them into short strips with a hole at each end. Then I hang the opener from them. It reduced the physical transfer of noise to the upstairs. Belt drive instead of a chain drive is substantially quieter too. There are torsion spring versions that aren't so noisy also, but my doors are too big for that style with the side mount openers.

[@r.castano4325]

the people upstairs will feel and hear the difference@@swimminwitdafishes8059

[@snaplash]

If your door has side mounted coil springs with lift cables, you may find that they go completely loose when the door is up. Id that case, you can safely remove the lower roller, but first block the track with a c-clamp or vise grip pliers if you don't have an opener holding it up. Be sure to maintain tension on the cable while it's off so it doesn't come off the pulleys.

[@JHTC]

My door doesn't have side coil springs.

[@postulatingspin4470]

A garage door pro showed me how to eliminate most of the noise. It was simple. Just lower the door, then loosen and retighten all the hinge and roller fasteners. This process releives binding tension that has built up….especially in newly installed doors that warp, shrink, expand, etc. They get noisy about 60 days after install. I was amazed…especially after wasting cans of lube to no avail.

[@JHTC]

That’s also good advice.

[@TommyLindquist]

Do you loosen and retighten each, one at a time? Or do you loosen all of them first, then go back and retighten them? Thanks for this advice.

[@OregonDARRYL]

@@TommyLindquist I was wondering the same thing. The only way this would work... in my mind... is to loosen all of them, to let everything go where it can relax and then retighten... maybe from bottom up? Who knows... but I am going to do this.

[@JBK647]

Please follow up & reply to the posed questions.

[@senthilrajanr1]

@@OregonDARRYLdid you try this? Did it work?

[@danlah1303]

Unique and cheap alternative!

[@JHTC]

Thank you

[@4Him4u2]

Bueno. Thanks!

[@JHTC]

You're welcome!

[@piezoman79]

A lot of nay-sayers in the comments. Remember folks, garage door mechanics hasn’t changed is 60-odd years. These improvements help correct some of the design elements that have been in place for decades to allow for ‘slop’ in installation. I will say that it’s imperative that you first ensure that your door and tracks are installed correctly (not out-of-whack) otherwise nothing you do will help in the long run.

[@JHTC]

Good advice

[@DanoSlingz]

Great tips! Also, I had a Craftsman chain driven opener for over 20 before I had to replace it. Installed a Genie belt driven opener and was really surprised at how much quieter it was than the chain. A huge difference! 🙂

[@JHTC]

Mine is chain driven. maybe I should get a quieter opener.

[@garydp9760]

belt drive OR manual lift

[@DanoSlingz]

@@garydp9760 belt driven

[@Mattyoung5150]

My garage dooe opener worked good until the garage door spring broke.

[@jmer3536]

You are a genius with the roller and hinge noise. I want to try when I have time. I do feel my chain driven opener has some slack/slap in it. Was hoping you had some tricks/tips for that too. But a great video non the less

[@JHTC]

Thank you.

[@root1657]

with the shape of my track, I was able to cut a slit up one side of a whole pool noodle and put it on the track without interfering with the chain or trolley when they run. Probably cut the noise of the whole system in half just by not having that 8' rail rattling.

[@jmer3536]

Hey good idea thanks@@root1657

[@jeffj2495]

Holy Smokes - this actually is pretty amazing. Great idea. 15 Decibels is a huge reduction.

[@JHTC]

Thank you.

[@Steve_K2]

If I remember my electronics training, every 3 db reduces the volume by half. For example, from 75 to 72 will be half as loud. Then to 69, half again. Do I have this right?

[@jeffj2495]

@@Steve_K2 yes i think so.

[@fiouable]

Thanks for the video. I lube the door hardware twice a year. Including the spring. Clean the tracks with an old rag and wd-40 and live well with the noise.

[@JHTC]

Thanks for sharing

[@hugh007]

Be sure the WD is removed thoroughly. The rollers should roll on their bearings, not slide through the track. Some people grease the track and it really creates a problem.

[@NotSoLiberal]

@@hugh007is this also true for plastic rollers (no bearings) ?

[@AlanAngelo1]

Be sure to check if the roller will go back in after the heat shrink. Mine was too big and I had to do without. The nylon rollers alone made a big difference.

[@JHTC]

Thanks for the info.

[@cliffshaw6530]

I had the same issue and drilled out the pin receiver just about 1/64 larger and the pin with the shrink tube fit fine.

[@canucha1985]

Thanks for the video and great ideas!! Definitely cost effective and if you're not super worried about aesthetics then this is a great option! For those that have a room above the garage door, this would be a superb way on keeping the noise level down. There's an actual company that sells spring loaded hinges that eliminate the ratttle. I think it's the Green Hinge system or something like that. Of course that'll be more expensive than pool noodles and heat shrink. So for those that dont want to use pool noodles, look at those hinges.

[@JHTC]

Yea, I saw the spring loaded ones. I just thought I would use foam for the cheapskates. lol.

[@canucha1985]

@@JHTC Hey. Nothing wrong with that. It's s quick, easy and affordable fix. I might have to try this ones mine break in and start rattling. Just got my insulated garage door in June and I have a wall mounted opener so it's really quiet as is, but I'm sure I can get it even quieter.

[@lylejohnston4125]

I'm going to try a black foam pipe insulation. Looks about the same but, not red.

[@thereplacementfordisplacement]

Spring hinges make noise, there's no sound dampening in them because it is all metal on metal.

[@jesusbaez4427]

Will definitely try this, great video thank you.

[@JHTC]

Thank you. I hope it helps.

[@russellstephan6844]

I had a two-car garage door that screeched like no one's business. It was *_loud_*! It was so loud that my neighbors would know exactly what time in the morning I arrived home (long weekends far afield hundreds of miles from home). For years I played with tracks, roller-wheels, etc. with no luck finding the cause of the screeching. Then, when I was closing the door, I thought to reach up from the outside through the gap as the sections where rolling down, and put my fingers on the torsion spring bar. Well, spank my monkey and give me a carrot! That full-length-of-the-door torsion spring bar was vibrating like a highly out-of-tune violin string. The torsion spring bar is steel. The center support for the bar is aluminum. I shot some used motor oil in the support's through-hole for the torsion spring bar. And guess what? No more screeching! The thing now opened and closed nearly silently! For a longer term fix, I drilled a small hole in the aluminum center support all the way through to the steel torsion bar. I can now shoot the hole with a grease gun every few years to keep the peace.

[@JHTC]

Wow, That's amazing. I liked the "Spank my monkey" lol

[@jeffrzentkowski2307]

Don't drill through the aluminum, it is not a support it's the cones the springs are wound onto. Drilling through that cone could cause it to shatter. The springs are tightly wound around the aluminum spring mounting cones. The cones are attached to a steel plate anchored to the header. For your own health, stay away from the springs, cables, and bottom brackets. Any of those 3 could kill you or take off your hand, head, etc. 45yrs. Of door experience says I'm right.

[@russellstephan6844]

@@jeffrzentkowski2307 As with all on the Internet along with all the experts... Use informed and proper judgement. A 1/16" hole through the aluminum isn't going to degrade its structural integrity one bit. But, duplicate at your own risk. A dozen or so DYI replacements of torsion springs for friends, family, and my own properties over five decades of major mechanical DIY, including house jacking*, says I kinda have a handle on things too. *And I fabricated my own house lifting screw jacks.

[@delinquense]

Oh yeah... Well I once watched back-to-back episodes of "This Old House". Game on!

[@kennethvankley7089]

To do the bottom rollers, raise the door and prop it up with a 2x4 so there's no tension left on the spring. Only do one side at a time.

[@JHTC]

Thanks for the comment.

[@kthom2001]

Like all your ideas! I’d switched to the nylon rollers and also used Gorilla Duct tape on the roller channels. I just ripped it by hand to the right width and then carefully applied it to the channel radius surface so I didn’t get any lumps or bumps. The shrink wrap’s also a great idea. I again used Gorilla Duct tape, ripped to match the circumference of the roller shafts and the carefully applied it. Mine fit really snug and eliminated any “sloppy sound.” The other major sound reduction improvement was to install Green Hinge door hinges! They are designed with a coiled spring around the roller tubes and the rollers slide in a slot. The

[@OregonDARRYL]

Maybe just adding something to the inside of the flat part to trap the roller better...

[@kthom2001]

@@OregonDARRYL OD, Thanks for the comment. Yes, you could add the Duct Tape to the flat side OR to BOTH sides, as there is plenty of room. However, the Green Hinges tend to force the rollers away from the curved side of the rails, so the door has a better seal against the exterior door seals as the door settles in at the bottom of the travel. Also, the rollers tend to run against the curved, lower channel on the horiz plane at the top of the travel, due mostly to Gravity. Because the Gravity is no longer "pulling down" on the door from the bottom end, it appears that they door is also rattling it's way toward the end of it's travel. Does that make more sense? Also, My chain drags on the steel rail on either side of the rail and there isn't an easy way to "tension" the chain as it runs on the track. I have a couple of pieces of HDPE that I''ve tapered the ends on and am going to mount those as wear "shoes" so the chain will run more silently on the HDPE....instead of slapping along the metal railing and increasing the noise levels. I'll comment on that after I get those mounted.

[@JHTC]

Thanks for watching my video.

[@wonderwhat4]

I love to tinker for a good cause. I cringe sometime at the noise my garage door makes. Especially in early morning hours. I've tried sprays but was still too loud. I'm going to look into this. One person commented to get a belt driven. But that is expensive and they have their own issues over time. Plus most of the noise comes from the door. Not the opener. They are just making the comment from their armchair anyway....Thanks for the idea. Can't hurt to try. 👍

[@JHTC]

I hope it helps. Thanks

[@jimjohnson3244]

Yes, I have a belt driven opener………still very loud.

[@racerx6948]

Nice improvements. I would also lubricate the bearings on those new wheels using a needle adapter for a grease gun. Flood it and ensure the bearings are fully surrounded by grease, wipe off the excess. The small amount of grease that will be exposed will get a bit of dust on it but the bearings will be sealed and outlive the door.

[@JHTC]

Good advise. Thanks

[@brucemacduffee6969]

One thing I did was to put a couple drops of 90-weight gear oil on the ends of the tubular hinge pins. Thanks, I did dribble a little across each spring. The reason I use 90-weight is because it's thicker than the regular "garage door" lube so it stays put longer.

[@JHTC]

That's smart. You should use that on your spring too.

[@glennr9913]

It would have been interesting to see how much the foam inserts quietened the door before bothering with replacing the rollers. Thanks for the video. I'm looking forward to trying these tricks on our doors. 👍👍

[@JHTC]

I should have done an experiment between the two projects. Thanks for the comment.

[@dingznthingz]

I replaced my steel rollers with nylon covered rollers. All my door openers are belt drive. Nice and quiet!

[@JHTC]

Very nice!

[@lakrfan4980]

An alternative to the two sided tape and heat shrink on the roller stems, Amazon sells plastic sleeves that fit nicely over the roller stems.

[@JHTC]

Well, that’s very smart.

[@MakeitZUPER]

Excellent presentation. I already came up with the shrink tubing idea on my own, but the pool noodle is a great addition. I was thinking about using some spring steel to do the same thing, but I like your idea a lot better.

[@thereplacementfordisplacement]

How long does the heat shrink last, I would not expect it to last more than a years worth of average use. You need some sort of HDPE plastic I think. The shrink will eventually extrude out where heavy contact takes place. It might work on light doors but not very long on a heavy insulated door.

[@JHTC]

Thanks

[@MakeitZUPER]

@@thereplacementfordisplacement If the wheel bearings are working, then it's just pressure on the heat shrink. I was going to hunt down some nylon tubes for durability but the shrink tubing is too easy to ignore. My doors are old school wooden and 10 x 10 each. They're holding up fine after a year of use.

[@ecospider5]

Since the heat shrink really isn’t spinning I bet a layer of gaffers tape would also work.

[@MakeitZUPER]

@@ecospider5 Prety much anything really. Work with what you have, lol.

[@suby22b]

I enjoyed that, thank you. I would offer that doing a separate set of before and after noise measurements with the electric door opener disengaged, and opening/closing manually, would have really added something to the video.

[@JHTC]

Shoot, yea, that’s a good idea.

[@tjriver6653]

what about give more friction to the motor? i just wonder that it could make it worse if motor fail earlier than what is supposed to last. but its result is very good. awesome job bro.

[@JHTC]

Thank you. Appreciate the comment.

[@arubaguy2733]

For even more quiet, install sound-deadening material on those 2' x 4-1/2' resonating aluminum panels. Polystyrene foam sheets or automotive urethane sticky sheets, or better yet, spray foam insulation. Quiet AND temperature stabilizing.

[@JHTC]

My garage door is hurricane proof, not flimsy aluminum. It is very heavy duty.

[@drozcompany4132]

The 118 Hz peak on the sound meter indicates the majority of the sound is coming from the opener motor (60 Hz line frequency harmonic) not the door itself, even though there was a significant improvement, it could be that you reduced the load on the opener with cleaning and new rollers.

[@sgnt9337]

Try attaching a 10 or 20 lb weight to the motor housing.

[@JHTC]

I should have released the trolly and just ran it manually. Maybe in a future video.

[@tomb816]

Regardless, quieter is quieter. If someone upstairs is no longer awakened by the sound of the door opening, I call it a win.

[@robertmckay7943]

Changed rollers on ours four years ago. The nylon rollers alone made at 60% different in noise

[@JHTC]

Good for you. Our garage door was so noisy. I'm glad I made it quiet.

[@davelevy4394]

Props.....respect......heat shrink tubing, would never have thought of that. I don't see the need for the two sided tape first, because once heat is applied, the tubing will be REALLY stuck on the roller pin.

[@JHTC]

I just had extra two sided tape.

[@kennethmcooke]

you can get heatshrink tubing with adhesive on the inside.

[@Jeff82556]

I agreed with Dave before I even saw his/this post. The double-sided tape made no logical sense at all.

[@davelevy4394]

@@kennethmcooke Doesn't ALL heat shrink have adhesive on the inside?

[@kennethmcooke]

@@davelevy4394 no

[@gg80108]

Use the heat shrink, dont get those expensive nylon tubes that are too thick. Also hurricane doors have extra long roller stem.

[@JHTC]

Yea, I live in Florida. We get a hurricane every once in a while.

[@TizzleT]

How long will that shrink tube last in that axle type of situation?

[@JHTC]

I just installed it last week. It still looks good. No tears or wearing. I’m sure it will last at least a couple years.

[@davecaron1213]

I put rubber washers (available at Lowes) between all the metal-on-metal motor attachment points. Huge sound difference.

[@JHTC]

Thats good advice

[@JohnKut]

Loved the content, I will definitely do it pretty soon, maybe even tomorrow. I am just surprised you didn't lubricate outer of those heat shrinks. You might have missed to mention that?

[@JHTC]

The plastic is pretty slippery, but maybe I should have.

[@terrywade6172]

If someone came to my house and opens the garage door; the noise will wake up the guest bedroom folks. I plan on buying isolators to the motor mounting to reduce the motor noise transfer and also the walls; The bedroom is above the garage. I do like your suggestions of the heat shrink and foam. Thank you for this video.!

[@JHTC]

You're welcome.

[@crcurran]

Great job. Now add insulation to keep the cold/heat out.

[@JHTC]

We live in Florida, it's 70-80 degrees here most of the time.

[@crcurran]

@@JHTC Insulation tries keep the heat out. Just like insulation tries to keep the heat in when it's cold outside.

[@ronchildres2451]

@@crcurran I did that to my doors and they are quiet, did not know about this video to also help with the sound as well. Now another weekend project in the works😀

[@stevenscott4096]

I found the rollers wouldn't fit with the shrink tubing on so I replaced took the shrink tube off and replaced the old rollers. Not really any improvement. It seemed the noise was more of a grinding type of noise. So I sprayed PTFE on all the hinges. WOW! What a difference. Now the door is all but silent.

[@JHTC]

Thanks for the comment, and good advice.

[@thereplacementfordisplacement]

Will be interesting to see how this works after a few years, unfortunately only the wheel conversion is a durable solution. Thanks for demonstrating the process and results.

[@JHTC]

I installed the shrink tubing the last week of June, I cycle my garage door 4-6 times a day. The shrink tube is still in the same condition as when I installed it. And you're welcome :-)

[@horlbecm]

Do you use any lubrication around that heat shrink over time?@@JHTC

[@byrysh]

I bought the heat shrink that has the adhesive in it. Marine grade

[@JHTC]

That's smart. I should have done that.

[@thangknowa3288]

Spring tension adjustment will assure the motor is not working any harder than it should and will be quieter. Close the door, pull the handle to release the trolley, and insure that the door rests comfortably between knee and waist height when you manually place it there. Adjust accordingly. Motor will be quieter and last longer, too.

[@JHTC]

Thanks for the advice.

[@JBK647]

How is spring tension adjusted?

[@thangknowa3288]

@@JBK647 At least two types, winding rods for one, spring end colors and placement for the other. Tons of videos. Basically, you want the door to balance itself between waist and knee high when disconnected from the mech.

[@JBK647]

I read that part.@@thangknowa3288

[@christoschristakopoulos1478]

i wish i saw this one before i moved to a condo 😀

[@JHTC]

Thanks for the comment.

[@dl440]

Great ideas and is short and sweet. Is the correct size of shrink tubing 11mm?

[@JHTC]

Yes it is. 11mm.

[@sybo10]

I'm definitely giving this a try, what is the double sided tape for?

[@JHTC]

It binds the heat shrink tubing to the roller rod.

[@steven.h0629]

🎯 PSA: Heat Shrink also comes in large enough width to cover a deteriorating Fiberglass shovel (or any garden tool) handle.. 👍😎✊

[@JHTC]

You're right.

[@SpyderRTL]

You missed one other area. When the motor is attached to the ceiling can generate a lot of noise. Put a piece of rubber or foam between the mounting bracket and the ceiling. This is especially helpful if you have a living space above the garage

[@JHTC]

Good tip! thank you

[@hugh007]

That would help, to be more effective you would have to isolate the bolts into the ceiling joists too. I can't think of any simple and reliable way to do it, though. Maybe some hard rubber grommets under the head of the bolts in addition to your pad.

[@Amopower]

Could you also link the decibel meter you used? I like it’s look compared to most others.

[@JHTC]

it's on the Apple Store. apps.apple.com/us/app/decibel-meter-sound-detector/id1254994873

[@ecospider5]

I had not thought of heat shrink, I have found a good coat of candle wax works for decades but the heat shrink is going to be quieter.

[@JHTC]

I hope it helps you.

[@Michael-jv2cn]

lift it halfway up and only pop out one side at bottom at a time with a claw hammer and replace bottom rollers. Put roller in and bend track to pop it back in.

[@JHTC]

That sounds dangerous.

[@papacamino2286]

My streak is still going,learn something every day,thanks Nerd!

[@JHTC]

you're welcome.

[@alanatkielski2572]

Also,Try using Sheet Cork Gasket material behind all hinge mounting positions BETWEEN DOOR AND HINGES themselves. The same Pool Noodle Noodles used as Isolation Material between the Back of Ceiling brackets where it screws into the STUDS . Extremely Effective if a living space pace is directly above it !

[@JHTC]

That's so smart.

[@victoryfirst2878]

What does the clear tape do for the roller axle Jay ??? I will be doing the same thing to my rattling doors fella. Do you think that the sound number can be lowered even more Sir ??? Nice video and work too.

[@JHTC]

It's double sided tape, and it binds the heat shrink to the roller rod. I think you could get a wall (side) mounted garage door opener and it would make it super quiet. But you would need to spend around $500

[@victoryfirst2878]

WOW I got that Sir. @@JHTC

[@TheArchersTungsten]

Amarr sells a quiet door system which is just putting plastic tubes on the wheel bars. If you live up north or a non hurricane area and you don’t have insulation in your door it’s gonna be loud as hell no matter what you do spend the extra money for it when getting a new door .

[@JHTC]

Thanks for the comment.

[@southbound1969]

Jay, I'd like to ask you brother where I can get the same hat that you are wearing. I love it.

[@JHTC]

I got it at Walmart 5 years ago. Thanks for the compliment

[@southbound1969]

@@JHTC Thank you, my friend.