Husqvarna 365 - The Best Chainsaw Ever Made - Here's Why

[@JourneyNorthAK]

That saw just fits you like a glove..damn fine

[@WoolysWorld]

its a great saw

[@Sensei948]

@@WoolysWorld rpm max 12500 ?

[@markjackson7650]

Couldn't agree more that the 365 is the best saw ever made. Had dozens of saws from Stihl and husky of all sizes and the 365 special is my go to saw for 90% of jobs.

[@WoolysWorld]

Brilliant saw

[@Matt_T__]

I've had my '02 Special since new and it still screams. ☮️✌🏼🤘🏼💪🏼

[@WoolysWorld]

Nice!!

[@kendallbyrne2788]

It's a legendary saw I know that much!

[@WoolysWorld]

Best I have

[@sethniswender3636]

Just got a 365 special and man oh man

[@WoolysWorld]

Nice!!

[@cadets318]

Nice saw. I got a Jonsered 2065 turbo which is pretty much the twin to the 365. Havent got my hands on a 365 yet but would like to.

[@WoolysWorld]

Thanks man, we don't get many jonsereds over here, in fact I don't think I've ever seen one in person

[@lancesickler780]

I wish I owned 2 of them. Glad I got one while they were still making them. I have yet to get into a job that it could not handle

[@WoolysWorld]

Same here, great saws

[@ryanhargis9227]

Just recently got a husqvarna 365 from 1998 but it runs like a champ. Any advice on how to keep it going strong

[@WoolysWorld]

Keep it clean and the teeth sharp, great buy

[@johnsonlong1272]

Husqvarna saws run good there is no doubt the only downfall I find with them out of the box is the mufflers do not allow them to get the heat out of the cylinder fast enough but that goes for most all power saws.

[@WoolysWorld]

Fair point, I've the muffler modded on this one

[@garengtutorial8923]

Husqvarna memang tangguh

[@WoolysWorld]

Nice

[@MrBaptiste003]

What type of chaine you used full chisel or semi chisel?

[@WoolysWorld]

Full chisel

[@ganicwil]

I got a 135 yesterday off a mate, mighty little saw😁

[@WoolysWorld]

Nice

[@alantester357]

I just need carburetor parts I'm currently 50 cord with mine and she needs a little work I need carburetor parts

[@WoolysWorld]

nice

[@StayRadDontDie11B]

Dude I love this video man. Just getting after it with that saw man. I just moved to a piece of property and helping them get it started been looking for a good starter but serious chainsaw

[@WoolysWorld]

the 3 series of chainsaws from husqvarna are brilliant, the 365 or 372 , id get a 435 first the add a 365 or 372 to it once you get used to it

[@Sparaco487]

@@WoolysWorld i dont like any of the 4series.Id point you to a good old 50 or 51 over a 435,440 or 450..the 350 was pretty good for the clam shells and you can turn it into a 346xp

[@JenkinsMowing86]

Try a 545 for a good (serious) starter saw. Then maybe move to a 550 mark II. Smaller 45-50 cc professional saws and easy to handle. The 550xp is brilliant for a 50cc, they defied physics with this saw. But if your just learning how to operate a saw I wouldn't go there. Maybe 400 series or look at a 135... depends on what you're doing with it. For the money you're better off getting an Echo saw honestly(490 may be good for you). Husky homeowner saws are kind of cheap made and overpriced but they perform well. Imo no saws are better than the Husqvarna pro saws though. Like above poster stated the 300 series are legendary. And if it's an XP it's still made in Sweden. Definitely not for beginners.

[@WoolysWorld]

Great comment @knowledgegod86

[@JenkinsMowing86]

@@WoolysWorld nice shirt man!

[@soggz4246]

Tell me. What’s the difference between a Husquavarna and a sthil?

[@WoolysWorld]

Man has been searching for the answer to that question since the dawn of time

[@soggz4246]

@@WoolysWorld lol. The answer is in the clutch. The Sthil has an external one, the husky is internal. I think the husky’s is to lessen the gyroscopic effect of the saw when you turn it upright to sideways. It’s a question I asked on my NPTC saw maintenance test. The instructor didn’t know, so I told him that, and he looked at me blankly and just gave me a pass. Makes sense, though. All the best.

[@WoolysWorld]

@@soggz4246 depends on the saw I think, my big huskys have internal clutches

[@soggz4246]

@@WoolysWorld do you find they handle better, sideways, than an external clutch?

[@WoolysWorld]

I've never noticed a difference

[@majstorivan4805]

This is very good chainsaw indeed. I also have one 365 XT but it ain't better than lets say old Stihl 038 magnum(also 70cc chainsaw). Why? She's bitch to start sometimes. Even harder to start with decompressor valve than without it(it can start either way). Stihl has better starting or ignition system, more robust housing and plastic, and it is proven in reliability through almost half century of usage. 365 XT has advantages as it is much lighter than old Stihl 038 Magnum, it is also bit faster in cutting, it has an excellent air filter system(no need for cleaning for a really long time while with stihl you'd better clean it after each tank or two) but after some extensive use plastic air filter holder will have melting syndrome (especially at summer days if you work continuously only with her. Is it worth the money? Yes! Probably best buy chainsaw in a world... But it ain't better than Stih pro series of chainsaws.

[@WoolysWorld]

Fantastic comment man , thanks. Funny enough my 36t won't start at all if you press the decomp valve

[@majstorivan4805]

HI @@WoolysWorld... I also forgot to mention that chain also tends to loosen more often than on Stihl chainsaws(after extensive use this was not happening to me when she was new)... I really can't get why? Especially when I need to knock down larger tree(yesterday I knocked one with 1.20 diameter, 20" bar on 365 XT. I had to tighten chain twice during that action... But maybe it is just mine 365 XT?). But it is very powerful and light chainsaw and for such money we got do deal with some minor flaws ;) Greetings from Europe!

[@Broddi169]

Sounds good

[@WoolysWorld]

nice one

[@roddyferguson8765]

It's daen the biz bro 👍👍

[@WoolysWorld]

sure is buddy

[@4550andre]

Yes Brother for big wood you have low and médium úntil 9300 load rpm strike.And yes that Is a long mile saw the litle Brother of 372xp(more top rpm because porting)but litle lack in low torq…in 4000-5500rpm). And no a good 044/440 Is like a Kat engine that one a Ford 😂😜 Cheers Brother and yes you can do a gasket delete and take cad😇 Greatings from Oporto Portugal André Campos

[@WoolysWorld]

Greetings buddy, thanks for the info

[@Francisco-yz7xq]

E o som ao relantim é uma coisa fora do normal atrevo-me a dizer, melhor que algumas motos. Tenho 1 pequenino derramador que é um espetáculo nas oliveiras e o 365 devora pinheiros que é uma coisa absurda.

[@novijeruzalemnewjerusalem3036]

I've got one. It's good when chain is sharp. If not, none chainsaw is good, even not this one 😉😂

[@WoolysWorld]

Lol, agreed man

[@garrykraemer8993]

Why in the world are you sawing the wood? Once you have cylinders (blocks) on the ground, lay the flat side down and use an axe to split them fast! I've split everything but elm, gum, and scaly bark hickory. I needed a sledge and a couple of wedges for them! Too old now to split wood!

[@WoolysWorld]

I understand what you mean, This stuff was to big to split with an axe it's sycamore it gets really tough if you leave it.

[@polderfischer8565]

"black hole sun..." :-)

[@WoolysWorld]

Lol

[@MrPadraigmccarthy]

I'm not even going to get into this conversation. All I'll say is I want what your smoking because it must be good stuff..

[@h.m.a.8066]

🤣🤣🤣🤣🤣🤣

[@WoolysWorld]

Ah man you love the frankensaw!! Lol only the best for wooly

[@johnvernon6663]

Why?

[@WoolysWorld]

It's great

[@h.m.a.8066]

Wooley. You have one of the best saws ever made and it's not the franken saw.

[@WoolysWorld]

The 435?

[@h.m.a.8066]

@@WoolysWorld . Ah come on wooley. The 181 XP I'm talking about.

[@WoolysWorld]

@@h.m.a.8066 lol, I had an idea that's what you were talking about

[@h.m.a.8066]

@@WoolysWorld . 😉👍👍🤝

[@Sensei948]

@@WoolysWorld 140 psi good compresion 372 xp 365 ?

[@mtnviewtow88]

here's why? done nothing more than my echo 680

[@WoolysWorld]

Thanks Scotty

[@budwilliams6590]

Still frosty.

[@WoolysWorld]

Good man bud

[@ericfuller6326]

Know what i like about husqvarna??? Their inventor wasn’t a member of the nazi s.s.

[@WoolysWorld]

I didn't know that

[@ericfuller6326]

@@WoolysWorld it’s a fact is what’s crazy not just a nazi party member but guy was s.s. The fuher called him” The fabriker” or some shit

[@WoolysWorld]

Crazy

[@buddysumner4022]

No doubt the 365 is a dandy saw, it’s one of my favorites ,

[@WoolysWorld]

Great saw