Husqvarna 545 pro unboxing and action Husky 545 mark ii pro chainsaw

Husqvarna 545 pro unboxing and action
Not available on amazon but here are some options amzn.to/2Sspn2I
husqvarna 545,husqvarna 545 mark 2,motosega husqvarna 545 mark ii,545 mark ii,husqvarna chainsaw chain replacement,motorsåg husqvarna 545 mark ii,husqvarna chainsaw,husqvarna 545 mark ii,husqvarna chainsaw start up,motosierra husqvarna 545 mark ii,mark iii,husqvarna 545 mark ii vs 460 rancher
Tools
Rubber Hammer amzn.to/2sr2UG6
Double head rubber hammer amzn.to/36CeWes
Drop light amzn.to/2RQCgRm
20lb telescoping magnet amzn.to/34c2P6l
3lb telescoping magnet amzn.to/2YGi8Ts
Screwdriver set amzn.to/34gBKPt
Shop-vac/ blower amzn.to/2PaHOET
Wet Dry shop vac amzn.to/36fZ5lE
utility knife blades amzn.to/2PAlAe7
utility knife amzn.to/2E7dnZU
Alan Wrench set amzn.to/2DUFc7B
Alan T handles amzn.to/2YslQ2U
star bit T handle amzn.to/36djvvu
9" Level amzn.to/2YbFobN
2' Level amzn.to/33FXhjY
4' Level amzn.to/35SUJRb
Socket set amzn.to/37VzG2g
Drill bit set amzn.to/2svamQh
Cordless drill amzn.to/33u1Z4r
Pliers set amzn.to/34nWy8z
Adjustable wrench set amzn.to/33o20ab
Wrench set amzn.to/35DPk0o
6 in 1 screwdriver amzn.to/34pXQj8
11 in 1 screw amzn.to/2DgpIdP
Hammer amzn.to/2XTOx8H
We are a participant in the Amazon Services LLC Associates Program (and other potential affiliate networks), an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites

[@c.saragian9502]

Awesome saw!! It is the best saw I have ever had. Easy to start 3 to 5 pulls max, tons of power and super light weight. I would like to try a 550xp mark 2 but the 545 mark 2 is an excellent saw.

[@shanesmaineshop]

I agree it’s one of the best saws I’ve had as well. Thanks for commenting

[@pattonger]

love mine. cuts so smooth. ton of power and not too heavy.

[@shanesmaineshop]

Yeah it’s a good song for sure, thanks for commenting

[@pallmall5495]

My go to saw everytime and I have several.Light and more power than I need most times.Mine does crank a bit hard though when it is very hot outside,but all saws will vapor lock a bit in extreme heat.

[@davido6915]

Good saw, I guess this model was a way for husky to sell a pro saw through the big box stores. It’s basically a 550xp with a few changes to the looks.

[@EcSsAwS]

545 and 550s are pretty different. Different port timing numbers on 550mk2. The 545 DOESNT have crank stuffers The 550s do 545s have a limited coil. 550s do not

[@ΗΛΙΑΣ.ΧΑΝΤΖΗΧΡΗΣΤΟΣ]

All great, enjoy my friend!!!

[@scottfoster2487]

I have a 550 ,good saw. The 261 is cheap to fix ,get a after market cylinder and redo it yourself,lots of good videos online to help so it

[@shanesmaineshop]

You know i never really gave it a thought, I really liked the saw as well. I will look into the parts to rebuild it. thanks for the idea and taking the time to comment

[@andrewray656]

Did you fix the 261?​@@shanesmaineshop

[@colinbourke9016]

Cool saw mate 👌.

[@shanesmaineshop]

thanks, I was using it today.

[@68fmj51]

I'm considering the 545 or 550. I need a more powerful saw than my little Stihl 170 that I've been using for years. Thanks to the wet weather and storms a lot of bigger trees have come down lately and the 170 just isn't big enough. I love Stihl, and around where I live you can't swing a stick without hitting a Stihl dealer, but I've read so much good stuff about the Husqvarna I'd like to give one a try. Fortunately there's a Husqvarna dealer about 30 miles from where I live so that's not too far away if I need warranty service.

[@shanesmaineshop]

I’ve heard a lot of good about both Stihl and Husqvarna but I will say I prefer the Husqvarna problem because that’s what I’ve had for so long. Thanks for watching the video and taking the time to comment I’m sure you will enjoy either one of those that you mentioned as far as the size I should do the trick just fine.

[@68fmj51]

@@shanesmaineshop thanks for the info, I appreciate it!

[@ChrisNieves]

Just grabbed mine today.

[@jonnysnipes3123]

What exactly is responsible for rev boost on the 550? What would I need to add to my 545 to make it have revboost?

[@shanesmaineshop]

I am sorry but I can’t help you with that one.

[@BDPGGames]

Hello. Thank you for reviev. Greetings from Poland 🇵🇱🙂

[@loimt]

It's a great saw💪

[@davidtrent5308]

Love mine it's a bad ass saw!!!

[@davido6915]

You got a good saw, i just don’t know why husky makes a 545 when they already have a 550 for a little more money you get a little more power, I guess they try to nickel and dime you to get the more expensive saw. My suggestion to anybody out there is go with the 550mark2 the first time, i do like the looks of the 545 better.

[@xrsuperduper7660]

Nice saw, i think i want one :)

[@shanesmaineshop]

It is a very nice saw, however I Wish I got the next size up

[@georgedavall9449]

@@shanesmaineshop The only way you could have improved, is to go with the 550 XP Mark ii, which is your saw with same motor, but ‘souped up’ a bit, to produce about a 1/4 HP More. After that, you’re going UP ^^^ in Price! Put an 18 or even a 16 inch bar, with a good chain, and you'll think its a different saw! Peace

[@shanesmaineshop]

@@georgedavall9449 I am gonna most likely take your advice and drop the bar size down a bit I feel that it is not as powerful as it should be for this bar size, however it has been an excellent saw and it starts every single time which is fantastic. Again thank you for taking the time to comment and watch my videos I greatly appreciate the feedback.

[@damblduig7264]

What bar size are you running?

[@janeriktangenhalvorsen9144]

13 inch i guess

[@shanesmaineshop]

sorry i just saw this question. 20 inch bar at the moment

[@davidtrent5308]

Love mine it's a very nice saw

[@shanesmaineshop]

Yes I’ve used mine quite a bit now and I like it very much it starts every single time on the third pull when it’s cold then after that one pull fires right up. Thanks for commenting.

[@plisken8799]

Nice saw

[@shanesmaineshop]

Yes it is, thank you

[@harryharry3193]

still like it?

[@shanesmaineshop]

Yes I have used it quite extensively to the fact that I finally put a new chain on it and I still like it. If I had to do all over again I would’ve got the next size up, but it’s a great chainsaw.

[@dustinkahn8619]

If u could buy one with an extra bar and 2 chains for $300 would you? I run Sawa at work ut this would be my first.

[@shanesmaineshop]

@@dustinkahn8619 Yes, if it appeared to be well taken care of and in good working order I personally think that’s a great deal but that’s going on just your information not looking at it or hearing it run or anything else but if everything is considered and it’s a good working song yes I probably would buy that. Thanks for the question and good luck

[@ВасилийУткиин]

Себе тоже купил 545 mark 2 отличная пила 18 шину тянет хорошо только не могу понять где эта модель собирается в Канаде или Америке.?

[@georgedavall9449]

Good video! Picking this up in a few days from my local Lowe’s. Please stay safe! Get some gear to protect yourself! Peace 👍👍👍✌🏻😀

[@shanesmaineshop]

It’s a great saw, I think you’ll like it. Thank you for taking the time to comment

[@Antonstrutovskii1309]

👍

[@ericfuller6326]

The poulan that is

[@CRyan55]

The 545 and 550 will eat a 460’s lunch. Those mark ii saws are downright ignorant.

[@shanesmaineshop]

I’m confused lol do you like the 545 or not just curious because it is a mark ii and your statement praise is it in one sentence and not so much in the next. Either way thank you for taking the time to comment..

[@CRyan55]

@@shanesmaineshop Definitely in favor of the 5 series saws. I’ve got a gen1 550xp and a buddy of mine has the 545. Probably the strongest saws on the market for their size class.

[@shanesmaineshop]

@@CRyan55 Yes I’ve been pretty happy with it so far however I don’t think it is as strong as my old 261 which I’m now rebuilding to make it a 262XP. But yes the 545 has certainly turned out to be a good saw.

[@georgedavall9449]

@@CRyan55 Indeed!

[@georgedavall9449]

@@shanesmaineshop He was a bit ambiguous in his comment. He may have meant ‘arrogant?’ Who knows? But he was right, and I failed to mention in my original comment the fact the 460 mainly has cc’s going for it, when the 545/550 are more powerful. Do yourself a favor, get an 18, or even a 16 inch bar, and that 545 will run rings around just about anything! A big bar is not needed to take down larger trees, if the proper method is used, i. e. ‘Bore Cut. Check it out, and please stay safe. How is the AutoTune working for you? Peace

[@ericfuller6326]

Actually its a husqvarna bud lol!!

[@shanesmaineshop]

I know that, did I miss speak in the video?

[@user-mu8mr6rk8c]

OMG! Nobody should cut trees like this guy did!!! That was more suicide than felling!!!

[@shanesmaineshop]

Lol, thank you for taking the time to comment.

[@na-et2gp]

He plunge cut a leaning tree so it didn't barberchair, fell it where he wanted it to fall. Good technique if you ask me, only room for improvement I can see is helmet and chaps. Nice saw!

[@shanesmaineshop]

@@na-et2gp Thanks for the support, I suppose hardhat and chaps are a good idea and I have them I just hate them. I suppose if I have a branch whacked my head or I cut my leg I would’ve wish I had them on. Anyway thank you for taking the time to comment.

[@na-et2gp]

@@shanesmaineshop yeah I agree the safety gear is a pain, but worth it if it saves you from an accident

[@shanesmaineshop]

@@na-et2gp very true