Husqvarna Rider 13 and 16

[@nathanashburner5429]

Good video mate i just got one myself today so this help out heaps

[@NilsKall]

Great! What model did you get?

[@nathanashburner5429]

@NilsKall 13 02

[@janetyeoman1544]

I have to kick my belt tension wheel like you did at 10:10. Mines 4 wheel drive and seems pretty reliable. Same battery for 7 years, as I leave a small solar 12v charger on it. Needs a drink holder like every other vehicle in North America. 🇨🇦👍

[@NilsKall]

Yeah I thought it was stuck but it was me who had forgot to tension the front belt. There is a grease zerk for that rear tensioner, have you tried to grease it?

[@NilsKall]

Didn’t know they sold the awd versions there, and yes, a drink holder was introduced in the later models. I have seen some guys add a bicycle drink holder to the plate under the steering. I can give you a link, he speaks Swedish but you can se the concept.

[@NilsKall]

kzbin.info/www/bejne/mWSQc3uPmJuijLc

[@TommyB196]

Great Video Thanks, I have a Jonsered FRM 13 Automatic which is basically the same Question Which Decks Fit These machines

[@NilsKall]

Thanks! There is no official guide to deck interchangeability but I assume (newer tried) that the corresponding deck from Husqvarna/Jonsered fit. Another kind of deck (ex. Mulch to rear ejected) might fit but there is no guarantees.

[@TommyB196]

@@NilsKall I have a twin blade mulching deck which has rotted away. I would like to find a replacement or total rebuild

[@dennismackiewicz1032]

I have a Rider 16H. I had it worked on by a Husqvarna dealer, when I got it back, the cutting height will go no higher than 2”. Before I took it there, at 9, it would cut at 3 1/2”. Can you tell me how to fix this problem?

[@NilsKall]

Hi! Did they remove the cutting deck or what did they do to it? There is a way of adjusting the height, I can add a link below to a video that describes how to do it.

[@NilsKall]

@@dennismackiewicz1032 kzbin.info/www/bejne/jJWng4idl8yljKssi=HQrJDdfN4pTYtpu2

[@haraldpost]

does your 15,5 hp briggs engine in that Rider 16 have an oil filter? I have the same Rider 16 and I can't find the oil filter... it is the 28N707 engine and the parts diagram does show an oil filter!

[@NilsKall]

Hi! There was no oil filter in my rider 16.

[@nicolasjanssens8658]

Hello Nils . i've got a r 13 c lawn mower. the belt between the dubble pulley and the cutting unit is broken. may i ask u a picture or could you explain how to fix the new belt? Especially, with the belt adjuster. thanks for your help, there isn't any vidéo specific on this.

[@NilsKall]

Hi! Sorry for the late response, I don’t get notifications when someone comments. To change belt you have to loosen the pulleys because they have a belt holder, a small metal tab designed to make sure the belt doesn’t fall off. If I remember correct you have to do this to the double pulley also. Maybe I should make a video of it, the rider is standing inside waiting for all spare parts to arrive🧐

[@richardpack8655]

Hey i have a new drive belt but i am struggling with the spring underneath any suggestions would be greatly appreciated many thanks ps love the video cheers

[@NilsKall]

Hi! What spring is your problem? The tension for that belt or the one under the engine? I don’t remember having any direct difficulties with either of them but I used a spring “tool” to release the springs.The workshop manual for these movers are easy to find on the internet if you google. If you don’t find it or are afraid of virus you can send me a Facebook messenger PM and then I can send a copy to you.

[@soulis1000]

Wasnt the 13 powerful enough or why would you rather have the 16? Is there anywhere where you can buy new plastic for it?

[@NilsKall]

The 13 was powerful enough but I wanted a new project and more power is always nice😀 I bought new plastic and stickers from www.maskinklippet.se but I think it is available from other suppliers too. Might not be for long, I know they are no longer available for many Jonsered riders or the older HQ Rider 1200.

[@StephenMortimer]

What the SEK did you pay for that ??

[@NilsKall]

6000

[@StephenMortimer]

I notice Sweden has no GOPHERS ... you could be the first to have a PAIR... want I send you a pair ??

[@NilsKall]

No 🙏, have enough of invasive specimens here......

[@StephenMortimer]

@@NilsKall That was easy .. the Lutheran Church should use GOPHERS to get Swedes to return to the Church.. PRAY AWAY the Gopher ??