Husqvarna Z560 Series Review and Demo Medium

[@TopNotchPropertyServiceLLC]

This mower is my dream mower can’t wait to own one someday thanks for sharing your opinion

[@SubStationSparky]

I just got the z560 for the home. Not the X BUT It’s a little overkill but I only do things big. The cut on this mower is amazing. I’m getting the clamshell bagger(very expensive).. hopefully I can just use that for leaves instead of using my cyclone rake.

[@mdpoutdoorsolutions7175]

We have only had issues with a few units when the parking brake needs adjusted. If you look under the seat where the handles attach to the frame you will see the cables coming in and where to make the adjustment. These usually need adjusted after 10-20 hours of use and then are good for the long haul!

[@cameronwilliams6611]

And That's Why It Turned The Engine Off

[@nicholaslowe4667]

Had ours about two years and just needed to replace the main belt on the deck, it has 700 hours on it so I am super impressed with how little service it has needed other than the normal oil change / air filter type stuff

[@jeffblackston724]

Nicholas, I've got 700 hrs on my Z554, and have started to have deck noise and occasional vibration. I've replaced pulleys and belt, but still have the issue. Have you guys replaced the spindle bearings on your machine?

[@nicholaslowe4667]

@@jeffblackston724 the mower now has about 900 hours and we have had a few issues. One of the stabilizing bars for the deck broke and we also needed to replace the front wheel bearings. But other than that nothing else

[@jeffblackston724]

@@nicholaslowe4667 dang, can't believe a stabilizing bar broke. I should check mine. I've heard the front wheel bearings sometimes crap out.

[@nicholaslowe4667]

@@jeffblackston724 yeah an employee hit a stump and it got a little bent and after a while it broke at the bend. But we didnt have to replace the front wheel bearings until about 500 hours i think thats pretty decent

[@jeffblackston724]

@@nicholaslowe4667 yep, I've drug the deck into a stump before. Luckily I wasn't going very fast. Hey, what were the symptoms of the bent bar? How did you know it was bent?

[@garrisonfamilyalbum3901]

I just left my Husqvarna dealer. Great people and great customer service. But to buy this unit without the fleet pricing, The unit is$12, 000.00. At 20% off with fleet pricing, it's $9,600.00. Wright is the equipment I want to start my lawn company with, but the dealer is 74 miles away. Husqvarna 2 miles away. Thank you for the doing this review.

[@mdpoutdoorsolutions7175]

Gary Cecil Garrison: You are correct they are expensive without fleet pricing! Hopefully your dealer let you know that right now when you just buy that mower you receive the 20% off. The program runs till 11/31/19.

[@patrochism7700]

Do a review on your 2018 commercial zero turn on 2019-2020 Doraville on a zero-turn and tell me all about your new zero-turn review and I could video but I want you to do a review on it has sound and everything on it.

[@jamesreddington2327]

How does the seat pop up? The red thing is stuck

[@johnphinney292]

“I’ll do a little cutting “ Mows 1/4 acre in 5 minutes lol Nice mower I have the 554L

[@Adam_Newman]

Excellent Mower ! Do the fuel tanks auto switch or are they plumbed together ? Thanks

[@georgex.patton.5362]

Separate tanks (not connected) with manual left/off/right switch easily reached from seat or standing next to it...Very accurate LED gauges on each tank.

[@jodyserecky9940]

How does this do on hills/slopes?

[@americandream_89]

The z560x isn’t that great on slopes. The front tires are not spread far enough. Along with the tank and seat being higher. Rear tires are also about 2” narrower then most mowers. That being said the mower cuts an stripes better then about all zero turns. The exmark/tore hold the hill better then any mower. The pumps are smoother take off.

[@lauderdalechad]

Why did the mower die? Ran one gas tank dry??

[@mdpoutdoorsolutions7175]

lauderdalechad Yes it did run out of fuel!! 😂😂

[@lauderdalechad]

@@mdpoutdoorsolutions7175 🤦‍♂️😂

[@thecuttingforce]

good video. I love my pz-t 54. I've made some crazy videos with pz-t.

[@elevationlandscape]

want to bring one up to Michigan for us to try?

[@CainsCollect]

Has anyone had any problems with the mower moving on its own?

[@TommieNall-ip8st]

The little people come out at night and look for the pot of gold must not have found it because never comes. Back with gas 😢😊

[@rodneyturner6423]

What price range are on this mower

[@Purplexity-ww8nb]

So the difference between a Z560 and a Z560X is a better seat, cast iron spindles, flat free tires, and a heavier duty deck. The price difference per Husky website is $3500. What size Hydro-Gear is in the Z560?

[@mdpoutdoorsolutions7175]

7700Purplexity The 500 series has Hydro Gear 4400 transaxles and the 500X series has the Hydro Gear 5400 transaxles. The other differences are what you mentioned.

[@sethparker4012]

That’s the 560X not the 560. They are not the same

[@jorgenjarl5842]

I Think that p25d are mutch better....

[@sethparker4012]

That’s a 560x not a 560 change the title of the video not even close to being the same mower

[@travgodfrey]

I got a new 560 i hate it , build quality is rubbish, so many bolts loose , seized castor bearing, wheel bearing sloppy , engine missing sometimes , handbrake cable fell out 2nd day , not very impressed, over 10 things wrong with it

[@patrochism7700]

What's up how are you doing is that a 2018 horse buying a commercial zero-turn you got the death of 64 cut do you got the what what you think about the 2019 Ford van zero turn commercial cut or 2020 commercial zero-turn I like the zero tell me more about the 2018 commercial zero-turn does a 64 cut commercial zero turn with the roll bar left for 2020 tell me about all the features in a gas gauge and an hour meter and do they come with two keys at 3.