Hustler Raptor Flip-Up - Common Problems

[@Stephen_Eee]

1:00 Oh so that's why my tiny car payment a month with 44 hrs on it won't start? You're a life saver! Thank you so much, it started right up, so much stress off my life!!!!!!!!!! 5/16 fit

[@jackfrosty4674]

Thank you for posting. There was grass between the handles and the outer side of the handle box. Needed a long screw driver to clean it out as could not really see it. Then wiped down area with safety switches on both sides of handle assembly inside the mower. Then opened and closed handles several times. Worked like a charm. Grateful to God for all of you that post how to fix these problems.Thank you for doing the good Lords work.

[@dannydover3824]

Bought the exact same mower. I figured these issues out on my own. But other than that. A great mower. I’m buying another one soon!

[@supersloth1667]

Safety switch was my problem thank you. Minor critique would be the exact bolt size but thank you so much!

[@PapaCasual]

I wish I would have watched this video before getting into the manual and diagrams. You still were alot if help thanks!

[@matthewthompson9709]

Just discovered that when the mowers come from manufacturer country of origin hustler in the USA adds all the starting relays.. the schematics in the manual don't really apply after all the other relays and what not is put on in the USA

[@goodamnesia]

I have this mower and you solved my problem!!! Great review and problem fixes!! Thank you!!!

[@redcardagainstracism6728]

I expect this mower will last several seasons with decent care. kzbin.infoUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend Also, I ran across the problem with it not starting the 2nd time I used it. There is a safety switch which is pushed in by the chute or mulching piece being attached to the deck. I took the cover off and it wouldn't start. Put it back on, no problem. It takes only a minute with 2 easily accessible wingnuts and no tools. This mower starts up first crank each time and it is a joy to use. It also mows in reverse by putting the key to the reverse area after starting and pushing in the triangular button. It will stay in reverse mode until you turn it off. All in all, for my homeowner needs, I really like this mower-and at 70 bucks a cut here in Miami, it's already more than 1/3 paid for itself in a month.

[@plee501pl]

Thanks for the tips brohemoth, you remind me of Richard Dreyfus and there ain't nothing wrong with that 👍

[@joeyvanostrand3655]

1:33 - thank you! Same issue on my Raptor SD!!

[@trevorburdick7192]

Thank you. Exactly what I had to deal with

[@laoboy316]

Thanks !!! I was thinking getting a hustler flip up 48"

[@mauriziobussolino2115]

Thank you. Same issue on raptor

[@markklement4994]

Mine would throw the belt their update was putting about a 1/4" plate on top of the deck under the pulleys so there wasn't a big space for the belt to get caught haven't had a belt come off since

[@NJonesButler]

It was the switches in arms, thanks!

[@BigP1967]

I've had the same problem with the micro switches. Also, there's no way my seat will tilt all the way forward like yours does. The seat safety switch cable doesn't have enough slack in it the way yours does. I've also just thrown a deck belt off the electric clutch. It's a 2019 model 48" flip up.

[@kieronstump]

Me too Joshua you’re Not the only one

[@JonnyBlazeTCB]

I struggle to get the pin in and out on either side to flip the deck. Any fixes?

[@LRG-]

Gracias!!!!❤️❤️

[@sweettee1931]

Plz tell me how u got the dang seat to flip up?? Is there a lever or bolt?

[@kieronstump]

Laughing out loud I wish I had time to go inspect all the stuff on these videos about the raptor maybe one day I will good luck brother

[@bpooboi]

I bought mine used. Before I even started using it I had to mess with those switches. Damnit. And the rod inside the hydraulic housing got rusted out

[@CSltz]

I have the deck jamed won't move either way now.

[@bradsheppard6407]

thank u much...so i have an issue...my seat safty switch (or whatever its called) is either stuck or broke..idk ..my engine dies even when blade not engaged if i get up from mower...i had to cut with a rock at my feet in case i needed to get up, lol..help!!

[@jeffgorin4578]

Replacing ignition switch noticed I might have pulled two wires loose with female connectors one orange and one black don't know where they go

[@fdlptruckie]

Once those issues were fixed are you happy overall with the lawn mower

[@cmart009]

For the most part, yes. I believe the biggest concern I still have with these machines is the pin to flip the deck, but otherwise they do fine. Most people find that they ride pretty well for their price range, and the deck leaves a nice cut. The kohler auto choke engines also haven't given us any major issues in the year and a half that they've been in use, so that's a plus as well.

[@fdlptruckie]

cmart009 yea ive been looking for a nee zero turn and hustler wasnt on the radar until I stumbled upon this video. But so far im sold

[@MrMnmn911]

cmart009 Thanks for your quick reply cmart. I'm thinking about purchasing one of these. My lawn tractor service man has recommended I get a larger unit. He's had to service my Troy-Bilt, 7 speed, 42 inch deck unit a few times, in addition to regular maintenance, in the last four years. I have 2 acres. He says my mower might be working too hard. He and a friend have recommended Hustler. Hope to see your update video. Thanks again.

[@cmart009]

Not a problem at all. If you're looking for a bigger mower though, you might try the Raptor line or Raptor Limited line. They come in 42", 52", and 60" decks for cheaper than the flip-ups. If you're worried about changing blades or doing work under the deck, they're still light enough to lift the front pretty easily with 1-2 people, and then set on some ramps or other stand.

[@deathcon6669]

Got the 2018 and it sounds like it has a miss and win I go to cut it just dies my filter went out I put a fauls cell on it it works fine no time to cut again it keeps reving up

[@CMDAVISs]

Omg thank u so much

[@BenLakeLakey]

Fitted a mulch kit and greased it up and now the lift actuator gets to a point and struggles any further

[@cmart009]

Is it struggling to lift the deck itself, or struggling when you're flipping the deck?

[@markklement4994]

Mine when putting the deck all the way up the plug would come off the switch to engage the blades

[@MrMnmn911]

It's been 9 months since you've posted this review. Thanks. Has Hustler addressed these issues during manufacturing these? Or, are buyers needing to address these issues with the dealers when purchasing them. Again, thanks for the vid.

[@cmart009]

I appreciate you asking! I was going to do another update video on these units next month, but now is as good a time as any. "Has Hustler addressed these issues during manufacturing these?" Short answer: Yes. Long answer: No. Production of these units has been halted since the tail end of last year. Currently, Hustler has hundreds, if not thousands of these units (48" and 54") sitting in their warehouse awaiting delivery on a per-order basis. All the dealers that I know of are still trying to sell these units, but are finally getting down to the last few in their inventory. At the start of this spring, Hustler distributed a long list of warranty fixes and corrections to the Raptor Flip-up line of mowers to dealers. Any dealer who sells these flip-up decks should be going through every unit, whether they've already been sold or not. Typically, we would call those who purchased one of these mowers and tell them of the issues, bring it in, and fix them. New units out of crates should be fixed immediately upon unpacking, before they go to their new owners. I say 'should be', because we've had varying results with people bringing in their flip-up decks from other dealers, only to see that the unit hasn't undergone some, or any fixes whatsoever. So, 'Yes', Hustler has addressed the issues during manufacturing by leaving the fixes to the dealers...IF they get around to fixing them. But, also 'No", because they're leaving it up to the dealers to fix the issues instead of Hustler themselves. When an order is made for a new flip-up to be sold somewhere, Hustler sends out the unit in the crate as it is...back from the end of 2015/start of 2016, without any updates whatsoever. It lies in the dealers to go through and make sure the units are fit for consumer use. "Or, are buyers needing to address these issues with the dealers when purchasing them?" Personally, I would ask the dealer if the updates and warranty work have already been done to the unit, just to be sure. An easy way to make sure is to have them show you how to flip the deck; If they have issues re-latching the deck, or the pin doesn't line up correctly/doesn't slide in easily, then they haven't correctly addressed the issues. Most dealers that sell Hustler zero turns should have at least one technician on hand that is very familiar with these flip-up units. After working with their issues for over a year and a half...well, you get to know them very intimately. All in all though, these mowers do a very nice job. When everything is functioning as it should, it's a fun little machine!

[@starnet36]

If you were going to purchase a new one, is there a manufacturing date (or date of production) when these issues have been resolved? (i.e., mowers manufactured after Sept. 2016 have been redesigned to correct, or address, the problems you've outlined).

[@cmart009]

Short answer: No, they haven't manufactured any flip-up decks with the current fixes. That all falls on the dealer selling them. The "2017" flip-up decks you see for sale at dealerships are 2016 models with all the updates installed (hopefully). Any other model besides the flip-up decks have had their fixes installed on the units prior to shipping them from Hustler. The flip-up decks you see being sold this year are still from 2016; Hustler stopped manufacturing them after the swarm of warranty issues from last fall (2016). Any time someone orders a new flip-up unit, Hustler pulls from their own stock in Hesston, Kansas.

[@starnet36]

Thanks for the reply; 2 questions: 1.) Is your comment implying that Hustler has discontinued making the flip-up model due to the issues you mentioned? If not, would it be wise to wait until Hustler begins producing the flip-up after addressing the issues; and when might that be? 2.) If you perform the repairs as stated in your message are you saying that will take care of the problems and essentially the mower will work fine?

[@cmart009]

1. Yes, they halted production of the flip-up models late last year. Production started in late 2014. I don't see them producing more until their current stock runs out at their warehouse. 2. Absolutely. Hustler issued a warranty packet this past spring detailing all the fixes for the flip-up decks. It was issues to all dealers who sell Hustler zero turns. The dealerships should be applying all fixes to any units that come in/get sold.

[@markklement4994]

Gas gauge quit working they fixed it had a spindle go bad they fixed it had a head gasket go bad they fixed it

[@53mjackson]

48 " Hustler SD cranks will not start , removed plug plug seems ok , will not crank seat safety switch plug checked the part on seat is loose plugs are in tact no crank

[@markklement4994]

But I'm happy with the machine

[@kieronstump]

Just don’t let nobody else ride it or you be on here searching for a way to get it fixed if it’s out of warranty it’s your mower and yours nobody touches it nobody even breeze on it not even your best friend no one that’s why am in here $3500 investmentAll screwed Up blades motor everything don’t make the mistake bro no one touches your raptor no one

[@neanie0182]

@@kieronstump Yep. I even freak out when my husband uses it, which is why he rarely does.

[@DanielGarcia-wv1lx]

I have hustler super z I have problems staring

[@dorrellmyles9995]

I have a Hustler sport that has no power when I engage my handles Help

[@dorrellmyles9995]

[e-mail]

[@jacquesblanquart7946]

Yes,🌼 allabout.wiki/Hustler the bag fills up pretty quickly when there are lots of leaves and I guess that is expected. It is quick to take the leaf catching bag off and put it back on. There is one bar with rubber ends that fits into a slot (bottom), one bar with angled ends that hangs on rubber hooks (top), and two stretchy loops that each hang on a rubber hook (one each side). You can hold the leaf catching bag with one hand full and not drop any leaves. It is NOT easy to empty it into a lawn bag without spilling. My trick: I put two lawn bags side-by-side in a large garbage bin and emptied the leaf catching bag into them. What spills falls into the garbage bin. 90% of the leaves end up in the bags this way with 0% back on the lawn.