I clean up the Control Housing and refurbish the electrical switches on my 87 442 A/C Control.
Пікірлер: 65
@garyhickingbottom82854 ай бұрын
Just tackled this before installing interior. I done the 9" rear end, body bushings, ac box rebuild, dash, floor shifter and now climate control rebuild, from your videos. Thanks.
@hutchhiperf4 ай бұрын
Thank you sir!! Glad to hear they helped. Nice LS Regal project you got going on.
@garyhickingbottom82854 ай бұрын
@@hutchhiperf thanks. I meant Quick Performance 9" rear end.
@g3garage Жыл бұрын
Hutch, just stumbled across this video. Couldn't ask for a better tutorial for fixing these control units. Great info!
@stevenshambach7266 Жыл бұрын
I just started watching your videos. They are great!! I have an 1987 El Camino. My heater controls came with the blue and red stripe on it
@denniscaulfield74804 жыл бұрын
Love the addition of the blue and red strip, when it comes to stuff like that I have a bit of OCD too.
@hutchhiperf4 жыл бұрын
It's a good thing in this hobby as long as it doesn't hold you back. :-)
@jayambry5105 жыл бұрын
The videos on this build never disappoint. It’s great to be finding out things about a car I owned some 25 years ago that was virtually the same car. I knew a LOT about the car, but not this much. I HAVE to see this thing in person when it hits the road! 👍🏼👍🏼 Again, great job my friend!
@hutchhiperf5 жыл бұрын
Thanks a lot! I would also love to see this car in person on the road. Some days it seems like it will never get done. I just keep plugging ahead.
@jayambry5105 жыл бұрын
hutchhiperf patience my friend. It’ll all be worth it as soon as you turn the key. And the first time you leave a stop sign/light sideways with smoke billowing out of the fender wells you’ll say to yourself “self...why didn’t we do this sooner”? 😂
@dhill5057 Жыл бұрын
Thanks Amin having the same problem keep the video coming 🙏🏾🏆
@robertoleeva9853 жыл бұрын
Thumbs up for sure, thank you for posting this. I was really hoping that you would show more of the vacuum lines control. My wheel is somehow broke.
@hutchhiperf3 жыл бұрын
If you mean the vacuum switch, it called ACDelco HVAC Control Vacuum Check Valve. That and the electric switch can be found if you hunt long enough.
@daveyelmer32222 жыл бұрын
I'm inspired to investigate my 81 control .... the fan switch stopped working, so I hardwired full power to the fan motor to get heat in winter.... I also bypassed the hot water valve - I have to move the radiator hose to ON in winter, or total bypass in summer :0) Got doubts about my vacuum system too. The switch switch does not move well. Maybe I have the "no ball" style switch. I have to take a walk through the wrecker and see what I can find I totally understand why folks are getting into these G bodies: the 60s "hotrods" are all high priced "collector" items now. Common folk want something they can "fix" (or break) themselves, cheap parts in wrecking yards. Now that is even getting rare. Mine came with a Buick V6, but I knew they also had V8 which would fit, even the 455 big blocks with minor mods (had to weld on a new engine mount to the rear crossmember and get the dreveshaft cur/balanced. Really great to see all the support from parts suppliers, and useful online presentations, thanks to people like you..
@kaywardbouillion13263 жыл бұрын
I really like this video it was very helpful on my 1984 El Camino
@thecentralscrutinizer51053 жыл бұрын
My hodge-podged 79 GM unit...mounted on a Dodge M500 Frame, all driven w/ 440/A727 drive train, all in a 1980 Fleetwood RV, E-25 Package equipped,, well it came as a _"Some Assembly Required"_ deal ;) My issue is the 7 "Teats" coming out the back and why in the world can't I find a diagram for proper what vacuum line to what teat placement anywhere....found a few for the typical round pattern, which also usually is accompanied with these mounted on a pre-fit plastic ring as to plug all vacuum lines in @ once ;) and even more concerning is that there's only 4 vacuum lines (all 1 color, BLACK) to put on said teat's, and should I block off the remaining 3 teats....or start looking for different vacuum depend devices with no lines on them?. I did sort out which was my suck source by of course, starting the engine... guessing the other 3 here, one is for defrost flap other is for fresh/recircl and 3rd for heater core??? But that'll be the easy part, I just don't know which line goes to which teat, I wasn't fortunate enough to have one of those factory form factored pre-set rings that let ya plug em all in @ once. This one also doesn't have said _"Teats"_ arranged in a circular pattern, these are all just splayed across the back of unit, no stamped numbers, letters, nothing Haven't had a free minute to back trace these yet, got one now, and yep....raining blood out there currently Par for the Course...
@drprick74329 ай бұрын
Great instructional video. Can you do this for every part on the car? 😂
@hutchhiperf9 ай бұрын
I'm on it! 🤣
@gmcworkshop11862 жыл бұрын
Great job great video was big help thanks man
@danielstevens69963 жыл бұрын
thanks I have a 92 s10 with the same switches
@donpratt9872 Жыл бұрын
Thanks just got mine out now I know
@anthonyalessi742 жыл бұрын
Great video, thanks!
@hutchhiperf2 жыл бұрын
Thank you sir!
@jayinla81Ай бұрын
Excellent video
@hutchhiperfАй бұрын
Thank you!
@jayinla81Ай бұрын
I can’t find haf rod channel. Is it still up?
@hutchhiperfАй бұрын
@@jayinla81 I think you searched wrong. It's haffrods. www.youtube.com/@haffrods7055/featured You better subscribe so you don't loose track of him again.
@dcal37455 жыл бұрын
Excellent video again Do you know which switch would cause the air to only blow from floor and vents regardless of where the lever is? Is it the larger switch you took apart with the springs? Or the vacuum side of it at fault? The
@hutchhiperf5 жыл бұрын
It almost sounds like vacuum. If you have a vac gauge (or even your finger as a check for vac) you could check the servos for vacuum and trace it back from there. If you watch the video you can see a slider arm for that switch. It controls a vaccum plug as well that distributes the vacuum.
@billyaustin-lj1qz Жыл бұрын
My Ac won't blow at the top. Can you tell me the problem? Which part on mine is broken?
@hutchhiperf Жыл бұрын
Hard to say from here. Do you mean the high fan blower speed?
@slowriot3 жыл бұрын
Just did the same job on my 85 t-type control unit but I had the big idea to disassemble the vacuum switch/valve to make sure it was clear and clean. Realized there’s no index on the valve and not sure if I’ll be able to reassemble it with the valve gasket oriented properly with the holes in the valve body (hope that makes sense). Did I screw myself, or is there a way to reassemble the valve properly?
@hutchhiperf3 жыл бұрын
You got me there. I'm sure someone must have done this.
@slowriot3 жыл бұрын
@@hutchhiperf that’s what I figured! But I haven’t found anyone discussing it.
@hutchhiperf3 жыл бұрын
@@slowriot you might want to check the boards at gbodyforum. That's always my "go to" for info
@Louisianawhips2 жыл бұрын
I did the same thing did you find out how to put it back together probably?
@danieljovanovski39615 жыл бұрын
awesome video once again. Do you know where i can buy those vacuum lines from. I found the gray and yellow vacuum lines cut from a previous owner.
@hutchhiperf5 жыл бұрын
Hmmm. Not sure on that one. Don't know of anyone making repops of that.
@MariaGonzalez-ei1pv3 жыл бұрын
You can find them in the junk yard...
@ramonaguilar99752 жыл бұрын
Goodinfo
@thomasdemarco6174 жыл бұрын
I am surprised you dont address the 9 port vacuum port issues and the dump valve issues how to test and possible repair
@hutchhiperf4 жыл бұрын
Mine seemed to work ok. I don't have a second one to tear apart. My motto is "Ain't broke, don't fix" :-)
@thomasdemarco6174 жыл бұрын
@@hutchhiperf how do you know is isnt broken? is my point they dry out
@hutchhiperf4 жыл бұрын
@@thomasdemarco617 Because I bought the car running and drove it many times. It worked. I'm not going to fix what doesn't need fixing until it's broke.
@hogansmith75893 жыл бұрын
@@hutchhiperf do you refurbish units on the side
@hutchhiperf3 жыл бұрын
@@hogansmith7589 no sorry
@thomasdemarco6174 жыл бұрын
hutch do you know how to test these two switches with a multimeter Thanks
@hutchhiperf4 жыл бұрын
You would need a wiring schematic. Then it's just a matter of positive to power supply pin and check for continuity on the others while the switch is moved.
@thomasdemarco6174 жыл бұрын
@@hutchhiperf ohms continuity would do it don't you think
@hutchhiperf4 жыл бұрын
@@thomasdemarco617 Sorry if I didn't say that right. That's what I meant . Though it wouldn't matter, I always us the red lead on the "power" side. Old habit.
@lamontwhitehead18095 жыл бұрын
Love your videos
@hutchhiperf5 жыл бұрын
Thank you. Tell a friend. I need all the help I can get. Thanks again.
@thomasbourgeois88883 жыл бұрын
I don’t have high speed and my cold lever won’t go all the way over to cold maybe 90% of the way
@alexcallas82225 ай бұрын
Common issue, mine does too. Don't force the lever all the way, or you'll break the black plastic pivot arm (located behind the glove box) that the control cables attach to. They sell reproduction arms as it happens so often. No high speed could be a bad relay (on the AC box under the hood).
@heyese3234 жыл бұрын
How do you remove the buttom cable??
@hutchhiperf4 жыл бұрын
See this pic practicalpages.com/ebay2/ACcontrolChevy84/ACcontrolChevy84bottom.jpg There is a small push washer that is over the cable loop on the stud it's pushed on. Pry that off to be able to get the cable end off. The cable housing end (which is red in the pic, but black on ours) has a clip that snaps in to the housing. Flip the unit upside down and you'll see it. Use a small flat blade to pop that loose and it should come off. Use care with these parts, they're old.
@lstackhouse3452 жыл бұрын
Where is the bulb located? Thanks
@hutchhiperf2 жыл бұрын
Looking at the front, it's in the upper right on the back. You can see it at 4:26 and again at 23:19.
@lstackhouse3452 жыл бұрын
@@hutchhiperf Thanks, just changed it out
@hutchhiperf2 жыл бұрын
@@lstackhouse345 For the WIN!
@ivory1988_slots3 жыл бұрын
can i pay u to restore mines , my ac switch wont blow on high
@hutchhiperf3 жыл бұрын
Sorry, I don't work outside my own car. I'm sure there's a competent shop in your area. Good luck.
@Louisianawhips2 жыл бұрын
They sell the replacement switch’s that’s comes with lifetime warranty that what I did.