Thanks for the video. Any chance of leaving the drivers side aluminum structure & steering column in place? Not sure if the box will still come out
@s10blazed4 жыл бұрын
How many bolts were left over?
@sterlingwitherspoon57093 жыл бұрын
Right 🤣😂😅
@OfficialAbyssGaming2 жыл бұрын
on my car i had 3 left over haha
@4sho100 Жыл бұрын
😆😆😆
@stingylizard3 жыл бұрын
THIS guy!
@mohammadalmokhtar96864 жыл бұрын
Nice work you've done, how much the approximate exact time for this process??
@bishop51664 жыл бұрын
2 years
@fun6103 жыл бұрын
@@bishop5166 😂
@fsu37843 жыл бұрын
By myself took me a few days
@afiguerasjr3 жыл бұрын
How much does the whole process cost?
@johnparada8655 Жыл бұрын
$1,500
@justinjacobsen84 Жыл бұрын
Not to be rude, but this video is almost of no help. Would have been GREAT if it went step by step showing and explaining what needed to be done in real time. But many thanks for at least making a video
@Reesetrain44 Жыл бұрын
in the first 3 seconds they have immediately broken the center console, its bolted with 4 bolts after removing the shift handle and the "console" that the lid goes on (6 screws) you can see the other 2 bolts at the very bottom prying at the top part broke the plastic welding and that will not go back together i have delt with 3 diffrent consoles all with varying states of being broken most of them its due to this EDIT this whole video is filled with what not to do on taking apart one of these
@marioneichelberger12372 ай бұрын
Sure did
@fsu37843 жыл бұрын
You don’t have to take out the steering wheel or any of the back behind it
@jdsstegman3 жыл бұрын
Atleast book is only like 4.6 hr. Not like some I have done at over 12hr!
@nono56383 жыл бұрын
Warranty time 4.6, book time 8.4. Plus evac and charge AC labor time.
@jdsstegman3 жыл бұрын
@@nono5638 woops. Miss reading the book time. Still did it in 4.5 anyway. Win! Great video by the way. Shows people what it takes to do a heater core.
@karenvanderwall6693 жыл бұрын
watch all the way through and you didn't show replacing the piece needing replaced....why would you not show that??????
@jbawlls13 жыл бұрын
I mostly just make these videos to show my friends but I'll try better next time. Thank you for your input.
@sterlingwitherspoon57093 жыл бұрын
They did.
@76629online3 жыл бұрын
There is absolutely no way in hell that this is how these dashboards are assembled and installed in these vehicles in the factory. I refuse to believe it. That entire dashboard assembly can probably be removed as a whole very simply if you know exactly what to unbolt and disconnect.
@jbawlls13 жыл бұрын
Every Chrysler product I've ever done I've been able to do exactly what your talking about. I couldn't figure out how to do this one that way. But I'm sure it can be done a better way.
@fsu37843 жыл бұрын
I didn’t have to remove the steering wheel or the big aluminum plate behind the dash above the steering wheel but other than that I had to did all of it
@zacherynagy84453 жыл бұрын
Is there an easier way to see the 2 blend door actuators that are tucked into the top of the dash? Ive found 3 of the 5 of which I have to replace 2 of for sire but I can't even see the other 2 that are towards the top middle and top of drivers side to even verify if they work or not
@fsu37843 жыл бұрын
@@zacherynagy8445 there’s actually 3 more. You also have the recirculating air door as well on the far passenger side top of dash. You have to remove the dash to get to all 3. Btw the 2 you are talking about are the defrost actuators. It shouldn’t be that bad to remove it honestly like I said above don’t remove steering wheel or aluminum plate behind it just lift and turn the dash out above and over steering wheel
@zacherynagy84453 жыл бұрын
@@fsu3784 so there is a total of 6 doors in the front dash? Or 6 doors total for the vehicle? I thought there were in the front then the one for the rear cabin