HURRY EVERY AC IS DOWN......

[@htroberts]

it’s almost like skipping preventive maintenance costs you more in breakdowns than you save on PM.

[@colehvactech7117]

Use to do work on a big day care out here in az they change their filters once a year thats all they ever got a call saying there units wasn't working 20 out of 23 units with belts completely shredded 3 about to break 3 units with grounded compressors two outdoor motors seized and and a unit with a restriction and one with a refrigerant leak and asked if I could do a full pm change filters and belts and do all repairs in 2 days

[@htroberts]

@@colehvactech7117 23 RTUs on a daycare? that’s enormous. I wonder how many kids were in that building on a full day.

[@colehvactech7117]

I think they have 12 maybe 15 class rooms with 10 to 15 kids per a room and there's a pretty good size cafeteria

[@kingofthepod5169]

Wait till you see what some people neglect on their cars. I bought a truck in 2019 that had tires from 2004. local highway department says they should be replaced every 5 years or when tread wears out whichever is sooner.

[@rinconusmc]

@@colehvactech7117 this is my first year anniversary working HVAC here in AZ. Being prior military nothing has surprised me until I went HVAC.

[@ryanravencaller]

"Let's let every ac break down before calling the service man, its probably cheaper that way then to have him inspect and repair if needed to the ones that still work" bill: 25k

[@Nighthawke70]

Yeah, there's going to be some screaming and yelling about this bill.

[@0xFF48]

It's probably that s a lot of restaurants have either been shut down or barely surviving during covid. Across the country thousands of restaurants have gone bankrupt. Fixing broken ac or make payroll or rent. You know it needs to be fixed but there are immediate concerns.

[@janquantrill9585]

🇬🇧 and most of Europe back in lockdown.who can blame them

[@ryanravencaller]

@@janquantrill9585 it's coming, were back on curfew restaurants have to close by a certain time, building capacities are being lowered, people are stocking up and buying multiple freezers and things

[@warrenzonator]

In reality, the owner probably saved a lot of money in comparison with staying on top of repairs, and down time costs nothing

[@scotterdoos]

Restaurant: tosses boxes in front of the breaker panels Fire Marshal: Cowabunga it is

[@mwiz100]

Oh yeah, pretty common in every restaurant I've seen and really that's nothing compared to hotels. I've actually seen chairs stored on the fire escape stairwell landings!

[@Nighthawke70]

I'd just send the boxes flying and leave them lay where they land. They'd get the point.

[@cr76802]

Fire Marshall Bill...... let me show you something

[@FishFind3000]

@@cr76802 ah oh!

[@crisproductions7611]

Here in Italy if you leave something in the front of the main electrical panel or the sub electrical panels you can get a very big fine...

[@oldmetalguy4577]

Out loud: "We got multiple a/c's down. Awe, man. That's a bummer." Inner voice: "Cha Ching!" lol

[@plantkiller312]

Most commercial techs dont get commissions. Paid by the hour.

[@locomotive1213]

getting paid the hourly cost´s of a worker isn´t the part you make the money with. buying the parts and whole devices with up to 60% off the listed price and selling it to the customer at listed price is making the money. but to be honest... crappy design of an AC device. Way to much unecessary copper tubing between the parts, what is one variable which determines efficency. i can sell you 23 kw of cooling/heating power in a mashine a third its size. Without the danger of getting mold delivered into my room.

[@JasperJanssen]

@@locomotive1213 of course the supercompact version of that machine still breaks, but the tech can’t get in there to repair anything so it needs to be replaced.

[@redeye2629]

Before I had my own business the company I worked for would only allow us to get them running no matter what. Dump thousands of lbs of R22 in systems and never go back and leak check or fix the issue. Now this was on a federal installation. On one of the major stores I had 62 rooftop gas packs and because we were not aloud to do a proper PM we had to replace almost half of them in the first six years. That’s when I went into energy management then opened my own business. I successfully bid and won contracts for over 30 federal institutions throughout the eastern cost. It was a rewarding adventure for me.

[@AJZulu]

Very nice

[@georgescott1180]

This is the first time a saw a 2nd stage to 1st stage refrigerant TRANSFUSION. That was AWESOME! Fixed.

[@ivemovedmountainswithless1571]

I’ve gotten lucky with that 1 one time. High charge and a low charge in the same unit lol pretty rare

[@nathanielbilicki446]

I don’t know what that is but this guy is HYPE about it and now I’m interested

[@frankoreka2900]

What gauges he is using I would love to See how the first stage and second stage work.

[@alexcunn77]

I feel like this customer just said. "no i dont want anything replaced I just want them turned on"

[@astronichols1900]

I really wouldn't like the idea of replacing whole units tho. Especially after seeing walk ins with non-hermetic compressors with R-12 installed in the 60's that are still running in chem labs at my university. That being said the compressors are indoors with just the condenser on the roof and the university always has the cash to spend on PM.

[@marksmadhousemetaphysicalm2938]

Makes you wonder about the restaurant as a whole...quality of the food, safety standards, etc...

[@williamaraujo779]

I admire how you handled this one/job/call like a multiple car accident and you treated all these units like they were human beings and you were the Dr. Good Job Brother!

[@joeslinky]

I got recommended your videos earlier this year and ever since then I could never stop watching! Even though I know very little about HVACR, I feel like you’ve taught me enough to know a little more than the average person.

[@MartinNyxel]

Same here :)

[@jacksonstephens9772]

@@MartinNyxel Same here

[@PleaseExplainMe]

As a european, I am always amazed by the horrible cable management in all of the units....

[@djtongi]

jeah absolutely dude, check my comment...

[@semifavorableuncircle6952]

American wiring pracitces are quite "interesting".

[@matthewsykes4814]

I still don't understand those orange twisty things they use, haven't they heard of terminal blocks....

[@matthewsykes4814]

@John Doe Fast and cheap doesn't mean it'll last long. Which means more work for the techs over a long period of time, good for the bank account. Strong and solid means you fix it once and it's good till your no longer around...I would still rather do the job properly rather than bodge it, every time.

[@timothybarney7257]

@@matthewsykes4814 They are called wire nuts. They contain a tapered coil spring inside that twist (to some extent, depending on if it's solid or stranded wire) and compress the wire ends together as you tighten them. They are actually deemed to have both a larger contact surface area against the wire and form a stronger connection than a Wago when properly installed.

[@ntsecrets]

1:18 I work in IT and we once had an entire server room go down because of that issue - it blew the MAIN breakers to the entire room and dumped the entire load.

[@thomasbell2644]

That's the reason why we lost internet at school one day because an ac failed and overheated all the servers

[@stephenhunter70]

@@thomasbell2644 The TAFE I used to attend had three server rooms, one was a dedicated for Netlab. They used to have the mains power for all three server rooms go down (it wasn't their issue). With the result being that the student network ended up being hosted on the Dedicated for Netlab server. Oh and the Netlab server also had an AC issue, it had none with the result being it was prone to overheating.

[@gtoger]

Datacenter guy here. That's why we run daily checks on all our CRAC units, including logging measurements for historical reference / trending. We also have temp monitors all over the room in addition to airflow sensors so we get notified if there's an issue before it becomes a problem. Cooling systems are not to be taken for granted.

[@MFCSTUDIOS]

Have a buddy who works in it at a hospital. They had a power failure on the main power. That then went to switch over to generator and for some reason the breakers/ transfer switch then failed all of this was at night. Couldn't find maintenance to reset breakers for generator, it went to the ups backup witch completely died as it never switched over to generator power. And the whole hospital went down. Voip phones, every computer, etc took 2 days to bring it back on line completely and recharge the ups & inspect. Then chase down all the remaining gremlins

[@devonoved7]

turner yikes, now that's a nightmare....

[@HoustonRacewayKid]

As a future business owner, I greatly appreciate stumbling upon your KZbin channel.

[@uelzgeheim6490]

i won't say you should stand behind the professional and watch them the whole time, but its ok to check back like every hour or two and offer them something to drink and have a short chat about what's wrong... it shows you're interested and have the guys work properly.

[@tyhuffman5447]

Chris - A minor point but the belt is made with Kevlar which is 5x stronger than steel. The belt can eat the pulley, it was the old belts that were much softer. Today belts don't break in, except for shape (going from something like a figure 8 to an oval 0). Once the shape is beat into the belts the belts then break in the pulley, that is if the belts are made with Kevlar. That is why you should never slow a spinning pulley with an unprotected hand, the belt can wear a very sharp edge in the pulley.

[@jacksonstephens9772]

Interesting fact!

[@Radi0he4d1]

10:29 I blinked and the disappearing filter jolted me bad

[@forceablepizza764]

lol, that pickle fork tool is an automotive tool used for separating ballpoints, that said, i too use it for several jobs that they were never made for simply because they work

[@domenicdalleva1045]

Do you ever tell your customer. That lack of PM will cost them more in electricity usage

[@Dive-Bar-Casanova]

They don't listen. Same people that don't clean the grease catch over the stoves and get fires.

[@richardscathouse]

Sometimes, that works

[@Moorgoth67]

Even more once you tack on the repair bills.

[@FishFind3000]

14:27 busted bearing...... there is no bearing!

[@GhostOfDamned]

😂😂😂👌. *bearings? What bearings?*

[@davidturney2975]

It don't need no stinking bearings

[@drue6360]

As a master card access tech, it’s comforting watching another professional work from the comfort of my bed. My neck still tenses up when you run up on other companies inadequacies and customer ignorance.

[@blueoval250]

Favorite access brand? I prefer Hirsch.

[@drue6360]

@@blueoval250 ProDataKey all day, every day.

[@blueoval250]

@@drue6360 never worked on it. Mercury hardware?

[@drue6360]

@@blueoval250 early versions were based on rasperrry pi. They make their own hardware now. I’ve been a loyal installer as they backed me while I lived in Portland and when I moved to Montana they had my back at every turn. After ecxpeiencing their stellar installer support and how well their systems run and never generate calls unless people want more media or more doors added, I won’t ever switch.

[@redneckingenuity9376]

This channel is great I’m a second year apprentice for a union hvac contractor and the mechanical problems units have I can figure out no problem but the electrical and controls is what has always thrown me and have yet to fully understand but videos like this are really helping building my confidence ... you gained a subscriber keep yup the work

[@DaddyQ2011]

Thank you for doing what you do. Your videos are informative, easy to follow and understand. I like your "big picture" approach to things. Wish I could learn from someone like you.

[@peterkutas1176]

Wow, I can't believe the dodgy electrical wiring in those units, no wiring looms or cable ducts...

[@MaddRamm]

All those old Carriers are like that. Come from the factory that way.

[@richardscathouse]

Mold! Christ, no wonder people are getting sick! The place should have been shut down for that alone!

[@richardscathouse]

@@MaddRamm Yep! American craftsmanship,

[@futz48]

Wow. Reminds me of my younger days when I serviced tons of this kind of worn out junk. Rooftop units are out of sight - out of mind. They tend to get ignored until they're totally broken, like these units. I've seen some horrors on roofs, and the customers still didn't want to spend the money.

[@Assault_corgi]

I would like to add I can tell you love your work and respect it highly with the detail you put in that many would often slack on and be lazy with.

[@m.s.6545]

Finally ! After discover all Excavator Channel, suck up any Blocked Pipe Videos and all Andrew Camarata Video, i found a new Channel to watch. !!! AC Repair. I love AC's !!!

[@HVACRVIDEOS]

Thanks bud

[@davormaplenik2776]

Amazing what this guy does with one hand

[@uakzkah6001]

Jeffrey Hu, you’re awesome!! I appreciate you supporting the channel!! 🤘🏼

[@EverythingHVACR]

Great video. You can't always fix everything! Good time management and triage work, that's the hardest thing to teach young guys.

[@julianfigueroa6359]

I wish I was you, you know everything. I just started working at Wendy's i don't know if you have Wendy's restaurant in California, but in Illinois there's a bunch, and as a facilities maintenance technician we have to repair kitchen equipment. Fryers, walk in freezers and cooler', and ice makers and pm's on top of that and there's only 3 of us in Illinois, I was just hired. I used to work on residential appliances not commercial. I love your videos. Please make more ice machine and door replacement videos.

[@ElecTrackProjects]

I just recently started in MEP engineering and I gotta tell you, your videos are incredible and gives me a lot of consideration when it comes to HVAC system design. Thanks for the great content!

[@acyv_]

Thanks for all these videos! Having my 3rd year of college during quarantine is a bummer and these videos have been somewhat keeping in the loop/rejogging my memory

[@lawfulpotato]

I don't know how I managed to find this channel. I also don't know why I can't stop watching it.

[@esuohdica]

I've always loved the fault finding process and I see lots of similarities here to my electronics work. Yours is just bigger than mine!

[@vasaricorridor7989]

a real pleasure watching a consummate professional thanks for sharing

[@manuelponce3715]

Great Video, goes to show PM is much needed in the long run.

[@deqwanjefferson2969]

Love watching skilled tradesmen work

[@JamesSamples]

I'm old school and like seeing the new gauges... MeasureQuick... Nice video! Thanks!

[@Inkling777]

I understand how you feel. I worked one summer in Myrtle Beach, SC. At that time most of the city's 40,000 motel rooms used Feder's window units and where I worked provided the service for them. When one was down, the room could not be rented, so motel managers were desperate for a fix. I worked in that miserable heat and humidity for 10-12 hours a day six days a week. The only good news is that I had lots of money for college come fall.

[@SolitarySwede]

Hey Chris! Solid video, thank you! It's always a delight seeing someone who knows his stuff being at work! Something happened with the image quality at 20:12 last up until the 21:01 marker. Looking forward to the next one! :)

[@myNAMEisORANGE__]

If the sheave is worn down like that, the balance is off and airflow is most likely too low. Most balancers are trained to set sheaves to achieve around 350-400 cfm/ton for efficiency. Closing the pully 1/2 or a full turn probably wouldn't be a bad idea to get by in this case. Love your troubleshooting. It helps me out alot too.

[@ninamcclure2193]

That would be a good training session for a newbie if time was on your side. I'm noticing that I can watch these videos now and I'm starting to pick up on what is going on and what to check. Thank you for teaching me how to fix hvacr.

[@warrenzonator]

It's tough for restaurants right now, cause they don't want to spend on keeping mechanical in good shape because it's not really a large return on their business and if it's functional it'll cost even more, but it's tough for you cause it'd be nice to see everything in good shape

[@Assault_corgi]

Oh man I can't tell ya how happy I am that I found ya again and subbed. Im pretty sure KZbin unsubbed me. But man I have missed relaxing and watching your videos. Just know you are part of my daily routine buddy. Thanks for being a bad ass HVAC serviceman

[@dustinurdaneta780]

Your videos are great. Thank you for all of them that you do!

[@chinadave2854]

Temp fix for that bad pulley. Wind string around it till the belt won't stick good for a few days till the part comes in. Works for me and the customer appreciated the cool.

[@YaF3li]

Just before this video I was watching an older one of yours (from last year, I believe). In it, you added new pressure controls (near the compressor) because the old one had failed. Now I'm watching this and when you got to the 5th AC showing those pressure controls, I'm like "wait a minute, that looks very familiar!" What are the chances? ^^

[@johncundiss9098]

"Thank the maker. This oil bath is gonna feel so good." C3P0

[@DigiVore.official]

kinda random but ok

[@fditty276]

Hey cris , I am an ac tech with more that 40 yrs in this trade, an I can tell you I've been down that road! Been there, done that.LOL

[@starlite528]

love all the cardboard piled up in front of the breaker panels! That's how a Papa John's I worked at 20 years ago burned down.

[@michaellewis7085]

I am 75, a retired PBX installer, operator, maintainer, and floor sweeper. for a few years I was considered to be the 'facilities manager' even tho I did not know what a condenser was (or even where it was!.) "just give it to the phone guy - he can do it!." I was probably ripped off plenty, but fortunately I was backed up by a multi-billion dollar public utility...

[@etherealrose2139]

Chris: "These contactors all look okay" Everyone else: "😮"

[@rustblade5021]

lol well the units are junk heaps anyway

[@richardscathouse]

I guess spider web isn't that flammable?

[@johnwalker890]

I like how you fixed all those units with a couple easy fixes or not so easy, but got all of them working.

[@craig1ize]

Very unwell today. Staying home, then this pops up in your notifications!!😊😊

[@russellhltn1396]

Curious about all the tripped breakers with no shorts. It makes me wonder if there was a surge that knocked things out.

[@TheLenaweeTrekker]

After years of searching for the perfect loose hamburger, a Papa's Coney Island moved into town with some of The Best Loose Hamburgers, but the lock down here in Michigan forced them out of business. They didn't even make it to opening for take out only. No one around here wants to put any money into anything. Just get them up and running for as cheaply as possible. I can't remember how many 1609s are now in place of electronic controls on those cheap prep tables, and it doesn't look like it will end any time soon.

[@rickb3288]

Every day (or at least every time I see a situation like this) I thank my lucky stars my father taught me the importance of preventative maintenance. OTOH, it is revenue for guys like you. ;-) Good job my friend - I always learn from you.

[@istvanvarga3326]

Nice channel, great attitude. I'd like to point out than no expert should try to do anything in this video on his own, especially after turning the power back on, not to mention working with bear hands, without gloves and uninsulated tools. At 24:30 you really see that only a few minutes of cleaning can make wonders... thus the AC will run smoother, your pocket will thank you for that... keep up the good work.

[@ivanperez8535]

Ever work on a vrv unit.... I'd appreciate a video to understand them better. I barely started watching so not sure if you already have one. Great videos, great tips.

[@rjeepster8640]

Great tip for the clo board! I always just checked CLO terminal 3 to ground to see if I have 24V. FYI for newbies, to bypass a faulty CLO jumper terminal 2 to 3 for temporary cooling.

[@gbowne1]

Those units look tired. I can see disasters coming down the road for most of those units.

[@ryanthompson2893]

gbowne1 time to rebuild them... or replace them with a crappy new one.

[@johnhoog8279]

Typical restaurant - don't replace anything. Just get them running.

[@epiphany6]

10:40 - aaaaannd it just satisfied... Sir, your unit is broken but, it's working.

[@williambutler7312]

respect , always enjoy checking in here

[@pb4life435]

I have to admit. I've been in the HVAC trade for 35 yrs now. And I've honestly never seen it done in HVAC. I've only heard the Term Double Flare. You can definitely tell the difference in the Meatiness of the Double Flare vs Single. Only thing is that if you have a bunch of Flares to do it would take you alot more time to do. But if you do singles properly they won't leak either. Properly I said! Lol

[@ricardoalvarez7016]

Seems like your work is starting to pick up! That’s good, let me know if you need a hand on the weekends, I’m in the Los Angeles area. By the way love the videos, your straight to the point and you always seem to find the issue!

[@johnwhite6005]

You Guys are Awesome to do what you do.

[@Robertsaenz200]

I remember that restaurant! The good old days. Love the channel man. I just bought a hat from the store.

[@You-Anakin-Skywalker]

i live in the netherlands and i have been following your video for a while now. still there are many differences with usa and europe regulations. like propane wii they have to pump back if not 10,000 ticket we also have to give up every gram of loss otherwise ticket and much more hassle

[@AquaTech225]

Went to school for hvac dropped it when I only had a summer thing left. Wish I had went after it more. Started two business since that are doing great regardless. Still got that feeling Now atleast. That I would of enjoyed hvac a little more having businesses in that field. Maybe oneday who knows. Can kinda kick myself now. I mean I still know enough to do my own fixes an get my own back up an going. But long as it’s been unfortunately forgotten a lot. Enjoy your videos man keep em coming.

[@connorscott5713]

First thought I had was someone flipped a three phase supply for everything and never checked rotation. I encountered one where the building was renovated the electrical service was replaced. Someone only checked rotation on single phase fan motors and it turns out the original service had rotation flipped in a few spots so three phase compressors turned backwards but the fans turned the right way. They were just lucky that it happened in winter and they hadn't damaged anything from turning compressors backwards.

[@inothome]

Wiat, a bunch of contactors did not need to be replaced??? You feeling ok? Keep up the good work and work safe.

[@Eddy63]

Good 1 Chris ... Pay attention all you young techs , you'll learn something ...

[@disneyplus5793]

You should make a vid were you explain certain parts just need replacing to prevent full loss of a unit. People sometimes just dont get why something needs to be replaced and why it will cost them more if they dont...

[@Jeepjones85]

This is the kind of stuff I see a lot when I live, cheap customers, and they never have their equipment serviced and when it fails it bad lol

[@arthouston7361]

At 7:30 or so, we see the typical bad work done by the 80% whose previous job included asking the question, "would you like fries with that?" Bad work by others keeps you and me busy. Also, you mentioned that your area has problems with the electrical grid. This means that when a phase leg becomes de-energized, you can open a breaker when the other two phase currents increase. If a unit is running, a phase loss will open a breaker very predictably. Units where power is a problem will often get an ICM450.

[@warrenzonator]

8:12 lol blown fuse just kicking there at the bottom of the box for who knows how long

[@tyzxcj34]

Awesome work always learning from your videos. Thank you

[@DigitalIP]

So i have a non HVAC question ive been trying to get answered, while its not your field i was hoping someone could answer since electrical work is common.. So when my house was built there were a number of outlets that instead of installing GFCI receptacles they made it so the GFCI is handled by the breaker, would adding an actual GFCI receptacle cause any issues with the breaker portion thats supposed to be handling it?

[@JGnLAU8OAWF6]

It should work but there is no guarantee that receptacle GFCI would trip first, even both of them could trip at the same time.

[@Live4Ibanez]

Nope, that would not cause any issues. Perfectly fine to do. Breaker will act as a standard breaker at that point

[@DigitalIP]

Sweet, thanks guys

[@FishFind3000]

@@DigitalIP I know you can’t have gfci in series as they will mess with each other from what I remember. But if you have a gfci further up the line and all the outlets are connected in series off that one it will still protect you

[@etherealrose2139]

Are you sure it is a GFCI breaker? They exist but code usually has AFCI at the breaker. They perform two separate functions. They also make dual function breakers. It'd make sense to have AFCI breaker and GFCI at the first receptacle.

[@alexgutierrez5597]

Hey everyone. I just graduated my HVAC trade school and I am wondering besides this guy what videos I can watch to learn more as I make my way into the union here in Arizona. I am already universal and I am super excited to work this trade for the rest of my life. Any help would be greatly appreciated.

[@haydenuk02]

Keep up the great work and thanks for the content stay safe and take care

[@alexanderlewis239]

Some quick fixes on many units,,,, It is sometimes to easy to rush through a simple problem ,, reset a high pressure switch and miss the real problem that was the cause ,,,, I did that many times , sometimes because the foreman wanted people to get around to many jobs and achieve the impossible..... Thank you for the video,

[@drtweak87]

Dude Ill have to recommend you. i live in corona. I do IT work for and have clients with Commercial buildings and they can never seem to find people who can do the job right! How far out will you go from Mira Loma?

[@petersmart1999]

Most important thing to have while working on Carrier units= Self Drilling Screws,seems like the doors just never go back on quite right 0r strip out

[@oldrango883]

🤔 they can be dangerous lol, I once lost my vacuum installing a panel 🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️

[@Rskinsg1]

I’m jealous of the good water pressure you always seem to have. It’s hit or miss on the east coast.

[@richardscathouse]

Getting that way out west too! Lower pressure all the time, the state would instead divert it to Nestle, 🤬🔥☠

[@briancarno8837]

I worked on those type of units and larger (Trane Carlyle Etc) in the 90s in the UK also quite a few water condensors Baltimore A C and a weird thing where the indoor units had a reversing valve so could be heating or cooling called versa temp but I think that was from the UK 3 phase power is 415v over here

[@andrewbello983]

Last year I replaced 33 of those stinkin' Weather makers on one roof. I was glad to see them go, 20yrs old! There were the same 7 or 8 that constantly needed attention or repair in the last year.

[@abdullah_q8171]

Hi wich new package i go with r22 or 410 for good cooling , i live in kuwait the temperature in summer reach 130 Fahrenheit ..? Not: in my country still they sell case r22 package.

[@JWimpy]

At 4:36 the center phase lead has been overheating. I don't know if you noticed it or not. But I know that you are aware that will trip a breaker.

[@elizabethvaux4420]

I was doubtful the sanitizer was going to be effective against mold but I did some reading of their SDS for it, and holy shit. If it gets in your eyes it *will* cause permanent eye damage if not blindness. Main takeaways are that it has BZK which is a great antiseptic, DDAC which is a great antibacterial/antifungal agent. It also has two other compounds that are popularly used as pesticides and occasionally industrial bathroom and carpet cleaners. All of these items will destroy your respiratory system, as well.

[@MrFrancist1]

Thank you. Thank you. Now i know whats X is for!!! That was my question on the other video!!!! 🙏🏼

[@0x42NaN]

I don't have a clue about ACs, they aren't that common in Germany, but I really enjoyed your vid. It definetly teached me some stuff.

[@Woltox1]

I love watching these vids, relaxing tho I dont work in that industry.. Thooo, from a diff country where things are different but seeing cables "floating" in the air is making my eyes burn, is there never used trunking inside the AC to keep the cables safe/tidy ?

[@matkremzar5474]

Ball joint separator fork tool. Surprised you don't have a tach for setting pulleys. Good videos!

[@falloutguy8878]

Blimey Chris you had your work cut out there? Nice job on getting them up and running? Keep safe dude

[@csterett]

The “tuning fork” is a tie rod/ball joint separator. Replacing a tie rod in your vehicles steering isn’t as bad (usually) as replacing a ball joint. Both may require a sledge hammer and can lead to a lot of expletives. What’s really fun is on GM models where the old ball joints are riveted in. So you either have to grind or torch off the old river heads. Of course this cab also lead to desire to set of a couple of sticks dynamite on the whole thing!

[@Sicktrickintuner]

It’s a “pickle fork”

[@lustfulvengance]

In the past when I have owned old GM trucks that have that riveted in bullshit I would just replace the entire control arm if the ball joint wore out! Usually the bushings are almost completely shot by the time the ball joint takes a crap!

[@dashcamandy2242]

You're absolutely correct in the abundance of expletives when replacing a riveted GM ball joint. I still have nightmares about doing the ball joints on my '94 Cavalier.

[@josephjakubec3171]

Its been a pickle fork for the 50+ years that I've been in the auto repair trade.

[@darkdelta]

I think Dodge trucks did that rivet trick also, but that's been a few years ago.

[@bobbyossenbeck6402]

Using a I call it a pickle fork but it is really a ball joint separator either way it is really hard on the front bearing of the motor especially when the pulley is bad a 3 or 2 jaw puller can save some expense but that is what kept us electric motor techs in business

[@dylanlutz5057]

Thanks for the content!

[@ehsnils]

8:48 - yikes! That's a weird mounting of the pressure switches. Seems like that would be very sensitive to vibration and metal fatigue.

[@dumptrks]

Great Video Chris..very in depth..keep up with your great and informative videos! You Rock!

[@Catayst-123]

Great Video Thanks for Your Expertise Take Care

[@FastSlothVideos]

Your job is extremely important, sir.

[@Barracuda48082]

Stay safe out there.