HYBRID FREEZER GETS AN INTELLIGEN UPGRADE

[@alistairmackintosh9412]

"So it shouldn't be a big deal". Famous last words...

[@ivoryjohnson4662]

Especially on a Friday

[@johnstrh1]

"That traps way crooked" THEMS SOME FIGHTIN WORDS

[@DanO181919]

The guy that said that probably want be there on the next videos 😂

[@HVACRVIDEOS]

Lol, but yes

[@jamalchilds8485]

Why is a trap needed on the suction line?

[@achannelwithnopurpose1977]

I will say that this channel has inspired me to make videos of my own trade work in the fire alarm field. I’ve already made a video where I helped a tech troubleshoot why hornstrobes weren’t making any noise while the panel was in alarm.

[@HVACRVIDEOS]

That's awesome, what is your channel name?

[@cesaralonso5701]

I don’t work on hvac but I always watch from beginning to end . Very interesting and I learn a lot ! Keep up the great content!!!

[@HVACRVIDEOS]

Thanks for watching, I'm glad you like then

[@kens.3729]

Always Great to See a Business Owner willing to Spend their Dollars. 🤔👍

[@garywelch1964]

I saw you reduced the suction line after the ptrap , well done. I cannot tell you how many time in nearly forty years I saw this done wrong.kudos to you for expertise!!!

[@itsprimetime9865]

it is wrong he's not suppose to do that he should of went with 5/8 right from the coil

[@garywelch1964]

@@itsprimetime9865 No by going 7/8 to 5/8 on a horizontal run there would be trapped oil in the evap.always come out of an evap with suction size to a trap and if necessary reduce at the top of the trap.

[@itsprimetime9865]

@@garywelch1964 no

[@CameronKettner]

It needs to be reduced after the 90 going down from the coil but before the 180 degree bend in the trap. The reducer after the trap is going to potentially cause issues with oil being stuck in it. Also if you reduce on a horizontal section of pipe then you cause oil to get stuck in the pipe / possibly evap before the reduction. Reducing it after the trap is definitely better than reducing it on the horizontal section after the coil, but reducing it on a vertical section before the trap would be best, as you would be increasing velocity through the trap helping the oil return. If you you reduce it after the trap you will reduce the velocity through the trap, possibly enough that you will not have oil return.

[@keenanwalker6597]

Intelligen is a game changer. It is my go to equipment now.

[@rdubinda239]

I absolutely LOVE the Intelligen equipment, it works SO good where I've installed it.

[@HVACRVIDEOS]

That's cool

[@melvinlazear8068]

good job as always chris and it was smart of the customer to replace the equipment before it failed completely retired hvac tech in southeast missouri

[@jeffreystinebiser7724]

Always learn something watching you. I really enjoy and watching and learning from you

[@HVACRVIDEOS]

Thanks bud

[@garypoplin4599]

6:33 - You have the condensate drain heater connected to the defrost heater terminals. Would it not be better to connect to the fan circuit to prevent ice buildup in the drain during the call for refrigeration? Thanks for all your detailed video posts. 9:43 - Interesting. I would have expected a class C IP4 private network space (192.168.x.x) rather than a class B. I guess they’re anticipating a lot of devices connecting to each network (over sixty-five thousand hosts per subnet).

[@HVACRVIDEOS]

I will discuss this on my livestream this evening 10/21/24 @ 5:PM (pacific) come on over and check it out kzbin.infoMOU3KyZBJr4

[@jonleiend1381]

Theses units are super easy to set up. Spends 15 minutes setting the date and time LOL :-)

[@uzlonewolf]

To be fair, he said easy, not quick 😂

[@jonleiend1381]

Could have you skipped setting the date and time manually and just sinked it with your tablet after you got connected?

[@HVACRVIDEOS]

Lol

[@jasonyeager9102]

Love the Intellgen line from Heatcraft. I still need to get down to Stone Mountain Georgia for the training so we can provide a better warranty for the customer.

[@vladlad8341]

Hey man I really appreciate the extra detail info on the new heat craft units operation and ways to make my work more efficient. I’m in Cincinnati and about to go through heat craft training. Looking forward to what I can improve on.

[@HVACRVIDEOS]

Good luck, I hear they put on a good class

[@russellhltn1396]

Efficiently is all well and good, but as they press harder for more, the systems are going to get more complex and it will cause problems. Look at all the complex stuff that's been put on cars: Computers to set the mixture, variable displacement oil pumps, fuel pump modules, complex battery management systems, etc. All to squeeze out an extra 1 MPG. And when they go bad, it gets expensive to fix.

[@kat2641]

Extremely nice an neat install!!!

[@HVACRVIDEOS]

Thanks

[@NorthernS0utherer]

Im glad he said it my ocd was throwing flags

[@helmsajr]

Nice work Chris Love the wifi hook up.

[@chrismarku]

Great work, Chris. Onto the next 💪🏼

[@fshn76]

I haven’t ran across an Intelligen system yet. I have a few Trenton units that use an EEV. I really like the EEV setup. From what i have read the Trenton digital controllers are designed and manufactured by KE2..

[@HVACRVIDEOS]

I did not know that, interesting

[@marcoferreira226]

Nice work, Thanks for sharing tips at the end of the vid.

[@HVACRVIDEOS]

Thanks for watching

[@jetegtmeier71]

a door sensor record might just be REAL useful when asking if the door was propped too long causing the freezer to warm up too much :)

[@HVACRVIDEOS]

Good idea

[@mysticknight9711]

3:42 -- safety glasses do not work when they are on top of your hat brim

[@HVACRVIDEOS]

Uh oh

[@4davebert]

Love intelligen, we spec it for all our new builds.

[@ZeroStatic]

Thanks again Chris for another interesting and informative video ❤❤❤

[@HVACRVIDEOS]

Thanks for watching

[@ZeroStatic]

@@HVACRVIDEOS Always a pleasure to see you looking after your customers so well, good tradespeople are hard to find and you certainly seem to be more diligent than most. I am amazed that your customers are so tolerant and allow you to video your work. I wish I were closer to your location but I am in Australia on the other side of the planet. Maybe on my next trip to the USA, I might try and find some time to visit there and buy you some lunch.

[@SAAJ6000]

Lets hope you never have to change the defrost heaters with that evaporator install 😂

[@HVACRVIDEOS]

My thoughts exactly

[@johnwalker890]

Good job Chris........

[@HVACRVIDEOS]

Thanks bud

[@docdat3468]

The Multisystem board would be great with a notification system to the guy in charge of the equipment that if something goes wrong they can call a tech out

[@Paul-IE-Repairs]

Definitely work from the top down, that way you don't burn you self on the previous braze joint

[@SproutyPottedPlant]

Ooh Heatcraft not Sporlan this time! What an awesome piece of equipment that Multisystem board 👍

[@skipsandvig8888]

What do you think about the smart defrost option? I’m skeptical.

[@Spencer1609751]

Are they using stainless steel fasteners on the New Unit?

[@ThePowerofElectricity]

"This video is brought to you by Heatcraft Refrigeration"? Wait wait wait. I think we go off on the wrong foot here...

[@HVACRVIDEOS]

Lol

[@DigitalIP]

is it possible to add like some kind of coating or a sleeve or something to help prevent rusting on certain pipes etc?

[@HVACRVIDEOS]

You could

[@soeveth]

Doesnt the Day light Savings question in setup ask if your time zone uses it? for example I live in the central time zone but we dont use DLS where I live so I would say no. But you said that Cali does change its time so that should be a yes.

[@jasonjohnsonHVAC]

What is the typical superheat with an EEV on a reefer unit. I know comfort cooling very well....but in all my years in this trade and the many reefer units I've worked on.....never touched one with an electronic expansion valve. I know the chillers i work on have typical ranges. Example air cooled chiller is typically 8-10° SH, centrifugal chillers run very low superheat from 0.5°- 5°. I got a kick out of how jazzed you were to see the data on your iPad. It's cool to see reefer equipment getting into the more modern available types of extracurricular controls. As a side note...I wonder if that card has the ability to except AI's....you could use some CT's and see if fans are running, compressor is running, heaters are running....etc etc. Analog Inputs give you the ability to see multiple modulating values.

[@HVACRVIDEOS]

8-10 for medium temp 6-8 for low temp is where I aim with eev’s

[@johnsullivan3909]

I noticed all copper drains is that code in Cal?

[@armandodeleon5047]

4:35😂😂😂😂😂BURNN BABY, man I do the same thing all the time🤣🤣

[@HVACRVIDEOS]

Lol

[@SilentServiceCode]

You are in DST until the first Sunday in November (PDT). If you'd set the locale and DST setting properly on your equipment, the time would work properly.

[@Saatse1]

Hi, is it possible to make this soldering job with induction heater?

[@EdwardOrozco12]

Nice.

[@HVACRVIDEOS]

Nice

[@4davebert]

When you say they beat the hell out of the equipment, I think you may be at one of our locations 😂

[@HVACRVIDEOS]

Lol, possibly

[@SoullessProductions]

Sporlan sit down. Heat craft taking this one.

[@HVACRVIDEOS]

Lol

[@RETread-xh6fr]

Safety goggles to protect the forehead? Nice! 😀

[@HVACRVIDEOS]

Lol, yes

[@Fluxkompressor]

Doesn't this condensing unit have a head pressure control valve? You said it does not need it if it has an EEV. Now I'm confused

[@HVACRVIDEOS]

I could have misspoke but I’m pretty sure I said it doesn’t have a liquid line solenoid valve if it had an eev….. if I didn’t say that , that’s what I meant to say

[@jorgegomez973]

Hey Boss does this hybrid freezer uses condensing unit and evaporator for freezer?

[@HVACRVIDEOS]

Yes

[@JAMESR.-xo3tt]

I like the intelegen system but in my area KE2 is used a lot more

[@markusbaath3045]

Why not use The new press cupling tools and press couplings

[@CSXRailfan6588]

Most installers would just put in the unit and not bother checking the transformer I see it all the time and the way I think of it it worked like that for years so I leave it because as soon as I change it to be right something will break

[@Nyarly_Relyeh]

I wonder, why the door sensor is an option, but not a requed one?

[@HVACRVIDEOS]

I will discuss this on my livestream this evening 10/21/24 @ 5:PM (pacific) come on over and check it out kzbin.infoMOU3KyZBJr4

[@Nyarly_Relyeh]

@@HVACRVIDEOS I do feel pity - 5PM PST is 3:00 AM in my time zone, so I could not watch it live

[@RefrigerationDevil]

Why 27 degrees lol 😂, they must really use that box

[@HVACRVIDEOS]

They keep partially defrosted chicken wings in the walk in so they can quickly cook them in the fryers.

[@JP-sd2cw]

cant you damage the system if you power it up under a deep vacuum?

[@HVACRVIDEOS]

I will discuss this on my livestream this evening 10/21/24 @ 5:PM (pacific) come on over and check it out kzbin.infoMOU3KyZBJr4

[@JP-sd2cw]

@@HVACRVIDEOS I missed not sure if you answered this.

[@dunckeroo1987]

An open color door can waste lot of energy. Cool room curtain strips or an air curtain could be installed if cooler door needs to be open for extended lengths of time.

[@HVACRVIDEOS]

You are absolutely right, it's a good idea to use a curtain to save energy if it needs to be open for a while but often times the customers don’t want them because the cooks ruin the curtains and they constantly have to replace them

[@paulsilver1625]

I really hate pump down cut out. So bad for the compressor.

[@skipsandvig8888]

@@paulsilver1625 it’s a must with refrigeration equipment with a receiver. Imagine off cycle like ac….and there goes the liquid charge equalizing into the suction line. Very bad for compressors.

[@ather1717]

Heat craft???

[@dunckeroo1987]

I changed my car's AC to hydrocarbons for the refrigerant : works better and leaks less. It claims to be an azeotrope mixture of synthetic propane and butane.

[@scottgambers8013]

Great job as always very informative. 1 question how come you still braze instead of using zoom lock

[@HVACRVIDEOS]

Good question, personal preference, cost, sometimes it's just easier

[@glennschlorf1285]

What could possibly go wrong

[@itsprimetime9865]

that P trap is gonna cause you issues on the long run ... should of went with 5/8 from the coil

[@yinggamer7762]

I’m a p trap noobie, how will it cause issues / what is a p trap for?

[@itsprimetime9865]

@@yinggamer7762 he shrunk 7/8 to 5/8 on the rise oil will have tendency to drop back down since vapor is light .. P trap or u bend is used when you have a height travel greater thenn ie: 5 ft Different line sizes call for higher or lower p trap uses

[@skipsandvig8888]

Actually the connection size p trap and then reduce on the riser is the better method.

[@itsprimetime9865]

@@skipsandvig8888 no ....

[@yinggamer7762]

@@itsprimetime9865 you only need it when the condenser is above the evaporator?

[@JustRickToday]

WHY DO YOU HAVE CAPS LOCK ON ALL THE TIME?!

[@SproutyPottedPlant]

The reason is because he put caps lock on and typed! It’s easy to use and free. Some older computers even had a physical latching caps lock key!

[@HVACRVIDEOS]

It's stuck on my keyboard

[@GentianElezaj-d5w]

just because it is 4 degrees below 32 F doesn't make it a freezer

[@andrewcourtney443]

This video is brought to you by WHAT

[@HVACRVIDEOS]

Lol

[@steveblake8766]

678 thumbs up

[@HVACRVIDEOS]

Boom

[@paulsilver1625]

American electrics are amazingly backward. I think

[@HVACRVIDEOS]

How so?

[@seagullsbtn]

It didn't blow up

[@BerryJoyko-u1m]

Ok Thanks for not having that other intro and changing it. no diferent than the other new one you had. very annoying to hear the same thing over and over. not just your vids. everyone uses the same. actually really like your videos. always lern something new. detailed. show all the good stuff. hello from ON.

[@HVACRVIDEOS]

Thanks bud

[@DanielDavis1973]

The way I remember daylight savings is "S"ummer = "S"avings. Spring forward (lose an hour of sleep) - Fall back (Sleep longer). Winter is regular time, Summer is Daylight savings.