Hydraulic Car Jack + Bearing Puller = Homemade Hydraulic Puller (The best DIY Creative Smart Idea)

SUBSCRIBE to my Secound KZbin channel link here..
/ @balkanmrdkdiy4741
Thanks to all..
For more DIY Videos press the link ..
• SIMPLE HOMEMADE ELECTR...
And here ....
• MAKE A USEFUL DIY TOOL...
by Mr.DK DIY
SUBSCRIBE LIKE AND SHARE !!!!
My FB Mr. DK DIY page: / youtubecrator
My Twitter page : / dejan_bmb
My Instagram : / mr.dkdiy
Making Hydraulic Puller from a Hydraulic Car Jack
All of my DIY videos I have done for experiment and my challenge, if you make these videos at home and something happens to you I will not be responsible for anything !!!
Welcome to Mr. DK DIY channel
My channel include of guiding videos:
-DIY
-How to make
-Awesome ideas
-Tips....
✅ Thanks for watching!
🔔 Like, Share & Subsribe my Channel
Thanks for your Support !
#mrdkdiy #bearingpuller #hydraulicpuller

[@snoozin99]

You guys that do this kind of work, I swear you are geniuses! Give you a piece of metal and a couple tools and you can build anything. Love your video, extremely cool to watch. :)

[@hugovictorfloresvaldivia1918]

Kp

[@MrDKDIY]

Thanks for your Nice comment bro !

[@PaulJones-bo8gt]

I said the same thing about this guy a brilliant mind for inventing new things Idk how he comes up with so many different things.

[@07uygur]

It is perfect idea but no one has watch the video because it takes 24 min. Normally it takes not more than 10 min.

[@suphiokan3603]

9

[@troye.1309]

Why must everyone add music to their videos? Most of us click on these expecting to hear just the natural sounds of a craftsman doing a job. But instead we're met with ANOTHER music video.... which, imo, ruins the experience.

[@jonperley7304]

Yes your right I MUTE THEM!!!

[@ooowilbur]

Aewww,shut up

[@richardvalter8837]

Ll

[@richardvalter8837]

Wlwlwl

[@smokineaglesrodshop]

good comment, I add music in some of my videos but at a much lower level over large spans of time between direct interaction with the camera. so you would rather just hear the sounds of the project? what if the video is sped up? do you prefer no background music then either?

[@bebamiso4031]

Uvek krasne ideje i iznenadjenja koje pomognu izabrati i odgovarajuci alat .A i uraditi neki dobar posao.Komplimenti Deki umiverzalan si i ujedno jedinstven.👍👍👍👍👍👍👍👍👍👍👍

[@spaight711]

That’s great. Now I’m thinking I might do the same, but change the design to a male thread at the top of the cylinder so that I can thread on whatever custom attachments for different jobs as they come up and make a threaded adapter for the bearing/gear puller. Thanks for sharing!

[@josuejuvenallondonoloaiza7655]

buen trabajo amigo felicitaciones Saludos desde mi Cali Colombia

[@javierboscan6433]

Excelente idea un pequeño estractor muy funcional lo felicito por su creatividad y darla a conocer gracias

[@tabyromescobar2248]

Fico saca rolamento robotizado boa da criatividade e só que é difícil agradar a todos os ENVELHOZOS parabéns😎👍🇧🇷

[@alimolina8769]

Buenos días hermano gracias por compartir excelente herramienta desde Venezuela Edo Carabobo Ali Molina muchas bendiciones 🙏

[@bennockley]

Nice build, would be good for for any workshop!!!, Thank You for Sharing Your Work

[@user-uo1dh1ct8o]

Молодец век живи век учись спосибо.

[@gerardlambert8141]

Bonjour je trouve cette idée merveilleuse et ça va aider beaucoup de mécanicien qui recherche cette outils génial 👍 J'ai remarqué l'utilisation d'une colle avec un spray en bombe cela m'aiderait beaucoup pour réaliser des collages rapide auriez-vous la référence de cette ensemble de colle express je vous remercie et à très bientôt pour d'autres vidéos très ludique merci beaucoup 👍

[@timffoster]

I'm glad YT has a volume knob ;) But other than that, great vid.

[@MrDKDIY]

👏👍

[@candiru68]

Muito bom, excelente criação. Parabéns

[@MrDKDIY]

Thanks

[@MrDKDIY]

Thanks for Watching my Homemade Video Projects >> Follow me on Instagram / mr.dkdiy_official Subscribe kzbin.info

[@donnie1581]

This is genius and I'll definitely be making one. Already have the large puller and bottle jack!

[@inthefreytoo]

🤣@13:50 The oil? bottle - sneaking up for the kill! Great Video! It's such a pleasure to see a "DIY-er" put stuff together using BASIC SHOP TOOLS. Just a drill press, grinder, welder, etc. Good camera/editing skills too! Thanks for the inspiration!

[@rapidfire-0680]

I love the idea, but it's an awful lot of stuff to have to fumble with on top of the weight of the hydraulic cylinder it is kinda ungainly, also the center of the puller usually has a centering cone shape to center in the end of the shaft that the pulley or bearing is pressed onto to help keep it centered while working the puller, but I definitely like the concept 👍

[@user-wo9zt6ko1y]

Спасибо за видео,не плохо придумали, удачи и здоровья вам.

[@cosimomonticelli4479]

Complimenti davvero una utile e bella invenzione.....continui a sorprenderci...ben fatto

[@bebamiso4031]

Si e vero continua segvirlo a fantasiche ideie e molto bravo.Una persona che tutto fa con molto cuore e passione saluti.

[@sergiodrapes3644]

Muito criativo , ótima ferramenta para oficina. Brasil.

[@Seteclata]

Só não entendi como o macaco ainda pode bombear óleo na posição original se foi invertido...🤨

[@Iynkaraa]

Thank you for the ingenious idea, I am sure having just the hydraulic jack getting teared a part was useful for many here

[@MrDKDIY]

You Welcome my frend 😉👍

[@howder1951]

Yes I like the mod with the hose, but I don't understand how it still works in the upright configuration.

[@franciscoduran2752]

Excelente, soy Docente con 36 Años de servicio , Activo . Venezuela, Franc. Duran

[@jernejloknar8011]

I would suggest a battery powered addon, add 20v battery, worm gear transfer and use crank to convert it to rotation in order to pump the piston. Also, maybe add springs to the pullers so they would try to return towards center on their own, making it easier to operate.

[@ramsaranbasnet6050]

Thank you sir Namaste I look fom Kathmandu Nepal

[@MrDKDIY]

👍👍

[@rogacianotorresanzures638]

Excelente gracias x compartir tus ideas geniales 👍

[@erenkocbey]

Harika bir proje :) Serum hortumunun zamanla çıkma durumu? Kalıcı bir çözüm bulunmalı ama

[@jonnygarland4741]

You REALLY did a good job perfect bearing puller there are other ways but you made it really easy

[@MrDKDIY]

👍😊 Thanks

[@skipskip3078]

Nice job there thank you education pays off

[@stevedubya291]

This is extremely useful for all of the people who've made “infinite power” generators, such as the Liberty Engine, and various others. The bearings on their devices have been stated to fail every 6 months.

[@veelink6345]

Mine been going 7 years strong now it's my flux compacitors I am more worried about

[@willsvenson9442]

He weld's everything with an arc welder, that's impressive.

[@MrTibbs90]

I love your videos. They're really cool and interesting. I just hate all the ads. You can barely go a minute without an ad showing up.

[@tioab3l]

Thank you for the idea! I work in a wastewater plant and motors go all the time and getting the impeller off is murder! Have been looking for a much easier way and thanks to you I found it

[@Animo92]

They sell actual purpose made ones

[@donnie1581]

Harbor freight has cheap pullers and bottle jacks too!

[@sylvainpetithomme6326]

très bien en position verticale. a l'horizontal pour moi sa ne marche pas est souvent je doit arracher des roulements en position horizontale. beau travail tout de même .

[@clintk5367]

That's great! Now my new project!!

[@user-yj8rz7zz8p]

Надо же было додуматься молодец нужную вещь придумал!!!

[@billyparker269]

That was totally ingenious what I don’t understand is the infusion tube is it blocked off completely or is it left open at the end

[@thomasedwards3372]

WOW that was the coolest thing i've seen in a long time. you just invented a cool thing and just made millions congratulations. good job.

[@MrDKDIY]

Thanks a lot for your comment bro ...

[@silvanapapais3363]

Come farei. Per. Sostituzione le guarnizione di in compressore fasc di 25

[@truthserum9157]

@@MrDKDIY- LOL they sale them at harbor freight.

[@dougjstl1]

Or you could just use a regular puller and a hammer this is a good idea though probably for bigger gears and stuff I wonder if there's already one out there somewhere

[@CillMhantainSean]

Small to big hydraulic pullers have been around for over 50 years now, and all far stronger than that one as their purpose built…..we made up a rectangular frame out of 50X50X4 mm angle drill 2 holes in to match wheel studs, then use a standard small bottle jack in its side to pull wagon brake drums off….cars and vans too…

[@bobbylee2671]

Wow u must be magical because last time I checked bottle Jack's don't work sideways.

[@gsh319]

very cool, got a few spare jacks lined up for the job.

[@adeilson701]

Excelente trabalho !!!

[@user-lq2pf2rn5g]

Классно. Нет слов. Вся мудрость в простоте.

[@edwinsanchez8577]

Muy ingenioso muy buena idea hermano bendiciones

[@btchhopperou812]

Nice homemade version of what Harbor Freight sells for around 60-70 bucks(w/o coupon), Just a but bulkier than the store bought model! Great ingenuity here- neccesity is the mother of invention, and if you need to get something done, the mothers teet must be suckled from time to time!

[@user-kz6up4yb6o]

¹о..

[@jevgenijsobolev4661]

Браво, умная голова и золотые руки. Очень интересно было смотреть. Bravo, smart head and golden hands. It was very interesting to watch.

[@MrDKDIY]

Thanks a lot my bro 👍👏😉

[@maksimilnitcky478]

В идеале,гайку переделать,сварка как то не очень. А на лапки,резинку одеть,чтоб не убегали.

[@rolinavarro6900]

I think the original puller that dismantle to attach to the jack is much easiest way to use to pull out the bearing from the shafting of the rotor.

[@xachikkirakosyan5873]

⁷

[@kimchee94112]

Agree but he would not have gotten 3.6 million views.

[@jamesgalligan8805]

Not worth the effort as if you had a motor on the bench like that it would be easy enough to replace and putting a jack out of use.

[@edinsonsuarez7705]

Ingenioso invento, no imaginaba que algo así se podía hacer felicitaciones Hasta siempre .

[@mihalycsapo2926]

Nagyszeru

[@burtthebeast4239]

Awesome video Brother!!!!!💯💯💯💯💯

[@MrDKDIY]

👏👏👍

[@mrk101]

Love your video. from vietnam

[@herowillrose3198]

Could convert to air-hydralic instead manually pumps? Liked connecting air hose.

[@ricardofuenmayor9165]

Excelente gracias por darnos herramientas prácticas pa mejorar nuestro trabajo

[@rodolfovicente4376]

Felicidades amigo por su inteligencia siga adelante Atte. Rosolfo Vicente d Guatemala

[@santiagolinares5598]

Muy buena felicitacioned👍

[@ralphmccawley1554]

Ingenious, well done. A good watch. Thanks

[@MrDKDIY]

Thanks

[@dan-o9746]

That is actually a practical tool to have on the bench.

[@thesnake316]

Хорошая идея. Лайк!

[@bobbofly]

Finger-tightening the retaining bolts on the puller legs for a frictional position hold will make setting them onto the bearing a heck of a lot less fiddly. also, a horseshoe shaped washer with a center opening just small enough to catch the inner race of the bearing will aid in removing it in reuseable condition, if you're working in volume with a given shaft diameter & such a thing would be of use. Or - simply alter the flanges to fit on it.

[@crisostomocenidoza9660]

Ok. Ang galing

[@ratujoperalawa8626]

Network q1

[@williamdon3442]

This kinda set up would be slick for doing ball joints which I know would be great

[@carlossilvasilva7161]

oiiiiiiiiiiiiiiiiiiiiii amigo moro no brasil muito bom trabalho parabéns meu like

[@bogusawszczepanik4703]

This is the best free software Ive seen. Respect.

[@Shinu_1200]

शानदार जुगाड़ कल ही बनायेगे

[@gaborilie3370]

BRAVO TIE SUPER NOTA 10 *

[@pliniobastos2215]

Magnífico! magnificent

[@freddyantoniorochahernande6733]

Excelente idea saludos desde Barranquilla Colombia.

[@MrDKDIY]

Thank you my friend

[@johnnyroura6054]

Going to try on my spare car jack. Thanks for the great idea.

[@larrydavis9029]

That's really a great idea thank you.

[@AlzubidiAllzubaidi]

ممتاز جدا ....👍

[@ridhadababi5858]

Nice job its good idea ...Thanks

[@MrDKDIY]

👍😉

[@jeffyoung478]

Great for light duty pulling.

[@howardnielsen6220]

Slicker then snot. Thank You

[@PunkkaRacingTeam]

Good idea, there's even actual pullers like that, at my workplace my co worker was using one, but it slipped even properly mounted and he's a really good mechanic, and it bounced out with a huge force and broke his arm, so definitely a good idea but don't save money in the wrong place imo

[@SkullySkullmeister]

Exactly, safety wise, use the right tool for the job!

[@vinniscarboni4095]

Nice...good job.will make one.👍

[@spelunkerd]

Very interesting idea, fun to watch. Do you think those small welds are strong enough to survive a hard pull? You might need a second ring of steel, just a thick large washer, to distribute the load and increase the weld surface area.

[@howder1951]

I was thinking about the strength of them also. I suppose a steel one-piece would be do-able if a lathe was available.

[@chhengchhay9740]

I don’t like the back ground music too loud. What he did is great 👍

[@manuelguillermoperezramire1047]

Buena noche te deseo en un lugacito del estado d Chiapas t estamos admirando los movimientos d tus manos un abrazo. Atte. Memo

[@pikirkandansalamtobat1743]

MANTAB BOS. FROM INDONESIA 👍👍👍💫

[@SpeedySailor]

If someone wants to make this with out altering the jack [ non-invert], then make a plate to fit over the ram. Attach the pivot lugs to the plate with arms long enough to reach/fit/clamp to the base . This concept is Great, not everyone wants to alter their jack so much. Pullers have a rating and too much hydraulic pressure can break the puller. Nice to be able to replace parts easily. Would be nice to see a portable remote ram with lugs on sides of cylinder to mount removable pullers of various sizes. Nice Idea.

[@bobbg9041]

Honestly I think it still works as a jack. But the size of it dont look like its going to lift 2 tons and if it did not very far.

[@midariss]

Отличная идея. Сделаем также.

[@user-gi2zu8rr7t]

Татар

[@luizmoraes2535]

Muito bom mesmo

[@kenfrazier616]

awesome tool

[@stevenm7566]

Awesome!!

[@drsunilpatil7699]

wonderful idea. Can I purchase it, as I don't have any workshop facility?

[@bezalelex31]

suggest a small notch below claw on the outside to attach a rubber band around all 3 to help keep claw assembly closed and hands free. 😉👍

[@natefrogharley]

Cool, so how did you press the bearing back on? Just curious

[@pfaunimaster523]

We used a ram off old trolley jack. Works on it's side

[@josueltenorio7765]

Parabéns pelo invento.

[@sylvaingravel8045]

Wow! Very nice trick!! I like it. Great job!

[@MrDKDIY]

👍👏

[@malochala]

I like your ingenuity, but I have a couple of questions/concerns. First, by welding your tabs to just the large nut that holds everything together, you are putting a lot of stress on those threads. You could potentially on a hard pull strip the threads and that nut right off. I like the idea of re-arranging the pickup tube on the hydraulic cylinder for inverted use, but how is it still able to work in an upright position?

[@jimjones6657]

The tube is still below the fluid level no matter if upside down or normal

[@tvdinner325]

I use bottle jacks horizontally all of the time, without modification.

[@lewis2553]

@@tvdinner325 So do those roll around floor jacks. As long as the pump is below the fluid level, there's no problem.

[@tvdinner325]

@@lewis2553 Yup! I use them to push out accident damage, horizontally, all the time.

[@dougjones4987]

@@tvdinner325 likewise

[@iansmeath8674]

Very clever, very clever!

[@virgiliobautista5701]

Nice job its good idea amazing from philippines 10 16 2020 any name of spray and for what that for

[@MrDKDIY]

Thanks 👍👍👏

[@raythompson2936]

Nice build, would be good for pulling wheel bearings and frozen brake drums.

[@FrustratedBaboon]

I would have welded a threaded pipe end and then weld a nut to the jaw side so that you can remove and use jack for multi purpose. Maybe you can make a video of it too. XD.

[@rrickyx]

Very good, thanks 👍

[@user-de1ym5ib5r]

굿👍👍👍👍👍

[@appliancerepairshorts]

Awesome video

[@user-zh5pt8fu6z]

Хорошо придумал с трубкой. Советский союз.

[@sunilsenevirathne4245]

Great idea but i would like to know how you weld this steel pieces to that cast iron nut on the jack

[@sojournsojourntraveler1203]

What glue system did you use ? I see your not telling . I am thinking JB weld will do it with slow cure time.

[@MarcosLopez-hb8gk]

Excelente muy buenos los vídeos

[@welthwelth1269]

Best job also finishing is perfect keep it up. My wishes.

[@staninjapan07]

Top video. Whenever I see this kind of video, I feel bad that I do not even have a basic bench or a space in which to use it. Apartment / flat life is bad from that point of view. Liked. Sub'd.

[@VoteTeaParty]

Interesting, but what is really gained? Yes it adjusts quickly, but weight of cylinder still makes is a bit clumsy.