Hydraulic Pump Repair

[@andrewarmstrong9194]

Can you tell me where the solenoid is that activates when you turn on the auxiliary hydraulics, mine keeps blowing fuses and I'm trying to track it down but I'm not sure where that valve is

[@Goatshack]

What size is the s wrench?

[@Goatshack]

I have a 185 robot that the engine died on me and won't turn over, made some noise a few days earlier that seemed to be coming from the flywheel end, and then was quiet, after about 5 minutes, it won't turn over, starter was bad, changed starter, battery is good, load tested it, new starter, still won't turn over, something is locked up

[@devondonohue8428]

yall ever have any other issues. mine drives 100% but little to no lifting power. hardly lifts its empty bucket reved wide open

[@bobbycain3229]

Im having the same problem an they told me it was the control valve ,have you figured out whats wrong with yours

[@devondonohue8428]

@Bobby Cain I pulled my pump. 20 minutes job. Split my gear pump and the seals were munched Inside. Rebuilt it with a princess auto oring kit and it works flawless. Adjusted my relief valves down a bit. Previous owner had them to high and blew the seals in the pump.

[@bobbycain3229]

Heck yeah glade you got yours going an thanks for telling me what you did so i can try that an hope it works for me

[@devondonohue8428]

@Bobby Cain I've learned this machine basically Inside and out. Any time