Top 3 Rebuilding Gems You Haven't Seen Yet - HH Special Compilation #14

[@lewiemcneely9143]

You sure have a crew there! They always make me smile when they aggrivate each other but always do the best work. THANKS MUCH

[@hydraulichands]

Thank you so much! 😊 They do have a way of making things both fun and impressive. Glad they bring a smile to your face while getting the job done! 😄👷‍♂️

[@lewiemcneely9143]

@@hydraulichands Wonderful job and outlook!

[@winterhorse290]

I love watching these men turn junk into wonderful parts. GREAT JOB!

[@FrankGarcia-tw9qz]

I respect these guys,could watch them all day, better than tv,will done 🎉

[@winterhorse290]

I know it’s because of my 40 years in the oilfield, but can you PLEASE give those guys some SAFETY GLASSES!!

[@GeraldBoone-qy2yt]

It is a little scary to watch!

[@stu-j]

To go with the safety flip flops and cardboard welding masks!

[@crissfloos1389]

Tout à fait ces gars là ne connaissent les équipements de sécurité en plus dans un atelier de mécanique générale.

[@markg7963]

I bet you they wouldn’t wear them.

[@Shirl15239]

How about some shoes or boots instead of flip flops with no toes

[@bristleconepinus2378]

I remember the old Hilo Iron Works that did all the fabrication & maintenance heavy machinery for the sugar mills...they had a horizontal lathe there with a chuck that was 8'-0" in diameter.

[@alizareebrahimi2993]

تشکر از هر سه کلیپ خوب شما بسیار آموزشی بود .❤❤❤❤

[@terry3665]

Awesome videography. How do these guys walk around with barely a shoe and not cut their feet to shreds

[@RogowskiBubba0864]

Again, great work guys.😊 Have a nice weekend, greetings from the Netherlands 😎

[@hydraulichands]

Thank you so much! 😊 We appreciate your support all the way from the Netherlands! Wishing you a fantastic weekend as well! 🌍😎

[@chisdalton9652]

Very clever people......but the lack of cutting fluid and all the dust created by just using water drives me potty and the other but it's better than no cooling at all Thanks for the vidz

[@patverum9051]

Having worked with shop cranes all my life, the last thing I would want is a kid on the crane (looking around) and MY FINGERS on the chain..

[@ringstinga]

Well done and much respect to these hard working guys.

[@FredStpierre]

Precision, isn’t the name of the game with all that dirty equipment and stuff

[@pcka12]

Machinery & conditions not much different to a factory 'service' workshop that I remember from Britain in the 1970s! Before 'elf & safety' arrived. Many of these machines originate in Britain and would have been old 50 years ago when you could find them in British workshops!

[@Shirl15239]

Do they ever check to see it something is true or Sq. They have to throw everything in the dirt must be a country’s law or something

[@pcka12]

@@Shirl15239 look carefully & you will find, squares, rules & measuring instruments being used, since this is a hot, dry country they think that earth floors are sufficient.

[@lewjones7272]

I think I spied a dean smith and grace in the background - looked a little out of place there ,but I think they put it to good use

[@dutchgray86]

Lang lathe as well, very good machinery. But it all looks well worn.

[@keithknowles1700]

Webster Bennet vertical borer

[@isverque74]

Sandvik Coromant precisa chegar aí.

[@shanejohanson1638]

In these videos it's either 300degrees or forty below zero in the shop.

[@duke3326]

English subtitles, please. 🙏

[@Shirl15239]

They make most things out of used metals I have never seen them test the metals to see how hard or even what’s it got in it for other metals

[@DavidEdmundForrester]

I wonder what the I&I numbers are for that shop.

[@tabareserena9792]

siempre los miro diferdo ,hoy en directo , exelent progama Felicitaciones desde San Jose de Mayo

[@jaswantsingh-km4hh]

इंडिया से मेकेनिकल मे पाकिस्तान बहुत आगे है और मेहनती लोग भी है पाकिस्तान के

[@FredStpierre]

How many workers fell in that cutting hole

[@kirkpatterson-pk7on]

great job, tell to smile more

[@tonyjones9127]

Soluble oil, toe protectors, gloves, glasses 😫

[@LanDaiLyLife]

Hello ❤❤🎉🎉🎉

[@Shirl15239]

Look at that drill wobble how can drill a 100% true hole?

[@thebighairy772]

Take a drink every time you see an OSHA violation...

[@Shirl15239]

I can’t drink that much !!!

[@chisdalton9652]

Only lasted 2 minutes well and truly hammered

[@garrypritchard1658]

Thay never do any pre welding prep😢😢😢

[@mikes7639]

At least most are wearing shoes, but yes burning with out sun glasses is really stupid. How good of a job can he do if he cant see. A lot of welding with no hood means lots of flash burns to wake you up in the middle of the nite

[@СтасСвирин-г1б]

Очки? Нет не знаем!!!!

[@patverum9051]

An electric motor driving a generator trough a gearbox...input 15 KW, output 10KW WHY? Convert AC into DC??

[@valentinozangobbo]

Probably a rotary phase converter

[@snarkybuttcrack]

motor drives a generator which then powers the motor, free energy

[@donnienicholson6062]

53:05 Try that without breaking the tap.

[@rodenasjunior]

a torre do torno cheio de folga o torneamento ficou todo picotado

[@crissfloos1389]

Il doit y avoir beaucoup d'accident du travail , ils ne sont pas plus équipé que pour travailler dans les champs.

[@joewest2560]

Enjoy the videos but it honestly bewilders me how could they be so caveman not to put a pair of 50 cent plastic safety glasses on when they are grinding? How could anyone knowledgeable enough to run that equipment be so fucking stupid as to endanger their eye sight?

[@stu-j]

Because the are not forced to use them like most countries ( in the uk it's the HSE ) so no fines or closing down of factories! They use kids as cheap labour also.

[@stevo184]

They get paid next to nothing. Blame the greedy owners whose ONLY concern is $$$ for themselves. The business owners in these companies have no compassion and empathy.

[@grzegorzbudz1776]

To wygląda jak fabryka w czasie drugiej wojny w Stalingradzie podczas oblężenia, albo jeszcze gorzej

[@CynthiaBaidoo-d6v]

Welcome Home Ghana Accra Kotoka International airport and Nigeria Abuja to meet Father and mother Steve and Cynthia Baidoo Crown, Thanks

[@crissfloos1389]

Par contre avec eux les pièces ont plusieurs vies .

[@mortenmyhrmoen7592]

🇳🇴👍👍

[@5filipi55]

😇😇😇

[@nikkinikstra9405]

the environment is an hot isseu in de western world, not in Pakistan. however, great results without modern tools. seems to me boring work

[@ВалерийЧ-х7ъ]

Пакистанские. Рабоче. Молодцы. , вроде бы. Работают. Примитивно. Иногда. Топорно. , но. Они. Работают. Повышают. Квалификацию. И. Лет. Через. 15. /. 20. Такими. Темпами. Догонят. По. Производству. Самые. Развитые. Страны. ,,потенциал. Есть. Желание. Есть. ,,

[@saiautocarecentre8068]

धन्यवाद. जे सत्य तेच आपण बोलता ,असत्य विचार व्यक्त करणारा ना ते केंव्हा पटेल हे परमेश्वर जावो.

[@javierpedrotti]

son geniales metalúrgicos pero a la vez estupidos: no se protegen los pies y los ojos de la soldadura eléctrica.

[@MbHb-c4h]

ھلکہ د کم زء دے

[@johannesneef1094]

Bad Quality, no Safety, dirthy and a lot of trash!

[@valentinMüller-i4s]

The workshop is worse than the secend one !!!!!!!!!!!!!!!

[@chronokoks]

In 10 years they will figure out scraping and will make their machines finally precise as needed. Also then they will start buying cheap chinese DROs.

[@raultellezhernandez2389]

No safety glases,no gloves,no shoes,no helmet,no underwear,no toilet paper only fingers,no cutlery for eating only fingers,Are they semigods or héroes misunderstood

[@markg7963]

I think these guys are awesome. Creative, smart, resourceful. I’m wondering 1. What do they get paid? 2. What does that pay put them in terms of their society? 3. To be in the upper 1% of income earners WORLDWIDE, I think the pay needs to be $32,000 a year. Most peeps in the US have a hard time grasping that. But there are billions of people on this earth that live in poverty. Im just wondering where these guys stand in their own society. 4. Clearly it would be nice to get these guys better safety equipment, working conditions, and better equipment, but you gotta admire what they can do without it. 5. Somebody mentioned lack of precision. Well, how do you know what the precision is? We are used to making things precise because we can. But sometimes it’s not that important. It comes at a cost these guys might not be able to afford.

[@mikes7639]

They built atom bombs you know

[@markg7963]

@@mikes7639 wonder if we can get a video of that process?😳

[@trailblazer1047]

These guys are going to have radiation problems later,they need to cover their hands neck and of course the eyes and face,bad S***,good workers boss needs to get them safety equipment.