50 Days Project || How we made Industrial Gearbox with old school technqiues?

Thanks for watching!!
if you enjoy to watch skillful workers & fascinate old school hacks,
Watch these video to enjoy & learn!! how 90s workers worked under circumstances.
With old machining techniques & old tools, It's the mindset that takes advantage of technology to do what makes the most sense.
I promise it is 2024
Thanks for the visit, Please comeback, Enjoy, Learn & Spread positivity.
Ignore Tags:
#machining #lathe #hydraulichands #machinists #metalworking #hydraulic #machine #restoration #repairing #recycling #pakistanitruck #amazingtechnology #top5 #fastestworkers #skills #skilledwrokers #5 #discoveringskills #1 #oldschool #oldtools #tools #smartwork #

[@andrearau193]

Hart arbeitende Männer, die wissen was sie tun. Mein voller Respekt gilt ihnen👍

[@ffgvjcu1855]

Величайшая работа, которую я когда-либо видел за всю свою жизнь. Благослови ваши усилия. ❤

[@Wolfyjinny]

In the event of a cataclysm, this is where I want to be, these are the guys who will rebuild without all the computers and tech, it may not be micron perfect like today's machines can do but their stuff works and will get the job done.

[@GeorgeLittle-ft2yx]

I’m amazed that all the old boys still got all their fingers and toes😮😮 And I wonder how many sick days they have off with arc eye.

[@scania357]

A lot of work in that project. Always enjoy your channel. Thanks

[@hydraulichands]

Thanks 👍

[@gbrown4796]

Welding on that thickness without some preheat is madness.

[@KonstantinUdakov]

Welding.. they di they best 😂😂😂😂

[@wz8729]

I wouldn't call it welding, I would call it tacking. Welding this thickness requires pre machined grooves and pre heat before hand. Don't forget the non-use of torque wrenches. I guess a crescent wrench and breaker bar is good enough. 😂😂😂😂

[@angie2268]

Love the Foundry sandals and the V belt lifting strops.

[@darrenbrown8991]

Love it. Nice work, guys.

[@rukmaneffendi3824]

Hebat....,tangan terampil.👍

[@nineteen-sixty-nine9373]

For metal that thick dont you need to bevel the edges on both pieces of metal in order to get deep penetrating welds?

[@joebell7057]

Only if you want it to last

[@lolatmyage]

Did you see the 1.5" grinding disc they were still using 😂 To me it looks like they beveled only the absolutely necessary parts with the gas torch, understandable because those cuts take up a lot of time Tbh I dont know why theyre even welding these, they're basic cast parts, maybe because they just have so much ship steel

[@alelie289]

They just need safety shoe😂

[@Doggmatt]

Wondering about those welds... I'm certainly not an expert or even much more than a practiced amateur but man, those welds for that thickness of plate??? It must stick together, obviously this isn't their first rodeo but I'm incredibly surprised! All that being said, my hat is off to these men and boys who work incredibly hard and are so resourceful!

[@KonstantinUdakov]

They do they best from second hand materials

[@411gtz]

All in the dirt. No kidding aside, Awesome!

[@robertmceuen3630]

The guy with the torch burning what looks like 2" thick steel. That is not an easy process, and he is doing it excellent. In sandels.

[@davidlittle9010]

That’s pretty good. I like the crescent torque wrench with extension. 😀

[@maurocunha6244]

Bom trabalho....Well Done boys

[@bozcro]

I guess that's the best that can be done in one's pyjamas.

[@mrjoseywales1865]

Helluva job! But let’s be honest that 100 yr old looking welding shield must have been made from an old milk jug and a cheerios box!

[@Franklinguy759]

Love the ammount of runout on the quill of the radial arm drill press.

[@ocintataable]

Beautiful 3M welding hood, model 2025 🤣😂

[@MsRazvan29]

❤❤👍💪👏

[@stevegreen2432]

Normally I watch 10secs of these type of vids and move on. This one was good. Well done this time. A solid, servicable box. Remember-the box does not need to accurate--only the bearings count. Made at a fraction the cost of a one off casting, even in that part of the world. For once--impressed--good job. All the best (But please get a better welding helmet--I can ignore the safety sandals, but not the lack of a helmet)

[@rolandgirard3955]

You may use "old school" machinery and methods but what you accomplish is obviously more than good enough for what its intended for!

[@KonstantinUdakov]

Too high weight, too high load On surfaces.. low welding quality.. But.. they've do they best! 😂

[@zz1268]

Grandios 💪

[@peanutsmith1462]

There’s some quality engineer watching this right now, losing his shit screaming at the TV

[@saadmhmm]

مجهود كبير وعمل عظيم ..! لكن ماهذه الالة ولماذا تستخدم ..؟

[@OfficeLinebacker-LibsSux]

These men damn sure earn EVERY dollar they make.

[@AMRAMRS]

*Rupees

[@africadreamin]

Obviously, these are not the first such gearboxes they have built, the gearboxes will be run until they fail or replaced, better to be self sufficient than tied to expensive imports, how many families does that workshop support.

[@richardbaumeister466]

All this money for fancy machinery but no money for basic personal protective equipment for your men. Sandals provide no protection for their feet. No eye protection. All of that money is going into someone's pocket. Very Talented people being used here!

[@KonstantinUdakov]

Capitalism 😂😂

[@casper8969]

I want some safety sandals like those.

[@MatthewTinker-au-pont-blanc]

Who designs these projects? They don't just come out of thin air!

[@miles2378]

I guess they couldn't afford larger steel plates.

[@MatthewTinker-au-pont-blanc]

@@miles2378 I wasn't criticiste them, I am curious to know who désignes these machines and how go about it!

[@africadreamin]

@@MatthewTinker-au-pont-blanc Mostly reverse engineering, copying what already exists.

[@karlalton3170]

Awesome job guys 😁🤘

[@arbjful]

@@MatthewTinker-au-pont-blancno not No not everything is reverse engineering. Most times they need to be creative and work with available technology and tools

[@nivdel]

Esses caras são incríveis.

[@namarhodge568]

A really interesting project. It looks like your shop stays very busy in this line of work. What is this gear box to be used on?

[@glennkamers]

Just used to generate KZbin views. Will be broken up after this video ends.

[@andrey020477]

Интересно почему не сделали корпус из литого чугуна , а так молодцы

[@игорьмихайлов-х2л]

Изготовление литого корпуса экономически целесообразно когда есть поторебность в изготовлении партии подобных редукторов, так как для литья потребуется изготовление мастер моделей из дерева или пластика (плюс время на изготовление самих моделей). В случае с изготовлением единичных экземпляров сварные корпуса экономически более выгодны. Я так думаю :)

[@raymondoreilly7569]

Nice welding sheld and the steel toe sandals 😂

[@ChuckD59]

Thanks for sharing, great work! But I'm a little surprised there's no torque wrenching involved. Plenty of other decent tooling kit though.

[@MrJermbob]

First.! Awesome vid. Love from New Zealand.

[@hydraulichands]

Thank you for watching! Glad you enjoyed the project. 🇳🇿

[@powerfury1]

Would be interesting to know do they sell these over seas and what they are used for.

[@Ghufran-um6yb]

These are heavy industry parts, probably for Sugar Mills, may be some for hydro power plants etc.

[@BarryRudge]

1hr 1min, I would hate to be the poor guy who has to remove that woodruff key sometime in the future.

[@1924ab]

Using a rubber belt to lift those pieces is insane.

[@marcusaureliusantoninus9029]

А че ништяк редуктор получился, мне на хундай сонату 1.6 как коробка передач пойдёт.

[@colinclenton7693]

I like the welder's safety boots???

[@KonstantinUdakov]

Safety is first 😂😂😂

[@colinclenton7693]

@KonstantinUdakov really???

[@Jacktheflex]

OMG

[@namarhodge568]

Great job, guys . It looks like single input double output 1 to 1 ratio. I would gues to go on a rock crusher, or some kind of minning equipment. Where is your shop located?

[@ДмитрийОстровитянин-щ8ш]

👍👍👍

[@bobwilson1511]

Never weld on a lathe endless. The part is grounded, not the lathe. Electricity goes through the bearings and causes. An arc The bearings will Have a flat spot on them

[@bobwilson1511]

You should have put gasket between metal before machining.Now you have bearing clearance problem

[@billkichman7770]

They did. See the little paper spacers.

[@NguyenThanh-oi3lt]

❤

[@tamellasuryanarayana8675]

Excelent work jai sree ram

[@ZOVOrkoV-c3e]

Маска сварщика😂😂😂😂

[@KonstantinUdakov]

Hands! Its best mask 😂

[@antonioferreira4446]

Um trabalho maravilhoso, homens muito experiente, gostei muito, só não sei onde vai ser usada, me parece que é para triturar pedra. E qual é o peso dessa máquina, pelo vídeo parece umas 10 toneladas

[@juancantero-i7r]

la segurida, 0 ,amigo juan de argentina

[@DzolyDzamper]

krawędzie nie fazowane, a na co komu przetop...płyta gruba może 5 cm, a to nasmarkane po wierzchu

[@benhoward4294]

Wonder if those old drive belts have a LOLER cert?

[@manolists2917]

Extremely heavy chassis, what use is it for?

[@ИГОРЬГРИГОРИЕВ-ч6д]

Обратно такую шпонку уже нечем будет ввтаскивать....😢

[@KonstantinUdakov]

Высверлить. Потом сваркой уменьшить отверстие и забить другую😂😂 Или разрезать большой диск и изготовить новый😂😂😂

[@badirtadj506]

Macha'Allah excellent travail vraiment des experts

[@1924ab]

Building heavy weldments is one thing but doing it in conditions like that is a crime.

[@demarfogao876]

E uma caldeiraria pesada e trabalham bem, só que deveriam usar equipamento de seguranças

[@ricklarouche4105]

Every job has a Mr. Blue Pajamas…😢

[@stanislavmihalik6540]

They probably don't know anything about preheating and some kind of weld test, and I'm not talking about X-rays because they do it with some kind of powerful press... that's why there is a high mortality rate from work-related injuries...

[@scroungasworkshop4663]

Awesome job. That will still be working in 100 years.

[@kubinka879]

Recycled ship steel?

[@KonstantinUdakov]

Yes

[@bendjeddouhaoues9964]

مشاء الله

[@thepubliceye]

What is the certified lifting capacity of a 5/8 v-belt?

[@warrenjones5077]

How about the earth for the welder😳 I impressed with the ingenuity.

[@ОлегБойко-д5и]

Ето очень богатая фирма у них даже кран есть😂 но на обувь пока еше нет

[@warrenjones5077]

I admire what they accomplish, but I cringe at the environment. Safety glasses boots and maybe not use a belt as a lifting strap, but again well done. 👍

[@SergioZapelloni-wy4qx]

Forse, un giorno, scopriranno l'esistenza dei bancali di legno.

[@ТомСоер-г3ю]

Надеюсь это не должно работать? С таким качеством конечно успехов им в экспорте

[@НазимИманов-ж5х]

А зачем такие сложности . Можно было одним куском и столько швов то не нужно было.

[@paradiselost9946]

1:06:35... missed the swearing angry man that spotted them welding over that open, new, and rather expensive bearing...

[@eduardfrazao3506]

Is this in 1950

[@shanejohanson1638]

No, it's 1895.

[@elvisoshaughnessy4109]

I dont think these workers ever receive pension when they retired

[@horaciorobles237]

el trabajo es muy peligrozo deberian usar lentes para q cuiden sus ojos pidalen a la compania lentes de trabajo poeque a la larga les ba ser un gran problema de vicion saludos del mexicano

[@frank64409]

What welding code are they using? This is a CWI's nightmare that has come to life!

[@wz8729]

you just machined a gear box and to lift it, you put the chain through the hole you just precisely machined. ughhh.

[@Supervisor000]

У них размеры в дюймах????

[@rogerswyer5357]

Know these are poor people but can they really not afford steel caps.

[@andrewrobinson2869]

All butt welds . One would think they should be full welds . They don't beleive in welding to any code. ?

[@KonstantinUdakov]

They do they best 😂😂😂

[@seantap1415]

Take all that time to make sure it's straight and square. And the back were the chain is , is about a 1/2 inch out of straight. It's almost all bullshit

[@billkichman7770]

They jsut make it thick enough and make it all square with the machine tools.

[@elvisoshaughnessy4109]

Every worker their cloths are dirty but exempt person in the blue outfit his cloth clean, what does he do go around and l😂ook

[@sadeqmiremadi3099]

اینا چرا از ریختگر تا جوشکار تا بنا تا راننده همه دمپایی پاشونه مکه گرمه

[@shanejohanson1638]

Tthe welding is atrocious.

[@sadeqmiremadi3099]

مونتاژ الکی جوش الکی دستگاه الکی ساختن

[@baumerbueb]

[@Saul.goodman2705Goodman]

👍👍👍