HydroForming with a Pressure Washer-PULSE JET

[@Bjokac]

I called myself a sheet metal worker... and then I saw this guy inflate two plates TIG-welded on their outside, with water, and make it a pulse jet. This guy deserves my uttermost respect. What can I do with my life now ? Dude, I would never burn gas in such a thin material, the steel could burn, and ... oh never mind, it's not my life. Just reminding everybody this guys breaks all safety rules we're taught in metal work.

[@Bjokac]

kindest comment ever.

[@benaldo138]

That's why he took it out on his truck to the country. What won't fly in a shop will go over just fine far enough from civilization!

[@urznightmare]

+Charles T technically there's an entire religion on a guy that followed all the rules

[@urznightmare]

+Charles T technically there's an entire religion on a guy that followed all the rules

[@urznightmare]

***** touche

[@colinfurze]

It's like an inflatable jet engine

[@gsppuffer]

How much thrust is developed at this size?

[@friedmanirit]

I'm Your Biggest Fan Colin!

[@nolanbeckmann371]

you should make like 3 or 4 pulse jets, put them in a row and make a jet powered truck or car.

[@colinfurze]

will sort it

[@da-Vincent]

Can you try to make a silencer for this pulsjet

[@paul-martintandetzki731]

Other people: hours of building and fuel calculations. Why can't I get the engine running? This guy: hold my inflatable pulse jet engine

[@adam_-adam]

Wish i had a dad like this growing up, ive been a builder all my life, everything mythbusters did i always did similar projects, and after watching this guy i can safely say he is a better builder than me, and i dont ever think anyone can out build me when it cones to a wide variety or random science projects cuz its something ive done since i was 3 yrs old. But this dude is awsome, glad he takes the time to record his stuff, love watching all your videos.

[@subzeros1451]

Most channels are like "Don't do this at home" but Colin is just like "Make sure you use this while you're doing it"

[@projectzip]

I do wonder sometimes if Colin is insane or a total genius! LOL

[@xn7331]

why not both? lol

[@thebeanus009]

Some may say you need a little bit of insanity when it comes to being a genius.

[@projectzip]

Clay Martin A lil from column A a lil from column B! :-)

[@projectzip]

thebeanus009 Ha ha that is true!

[@staffa007]

thebeanus009 SENECA "nullum magnum ingenium sine mixtura dementiae fuit"

[@colinfurze]

Make a Jet engine with your pressure washer

[@justinoldham8723]

Lol

[@jordanjayd]

You're my fucking idol

[@Finrecon1]

I would love to see you make a pulse jet out of an car exhaust.

[@philzambo]

Clever stuff

[@SarcasticMarauder]

It makes me happy that you've finally got some ear protection, awesome work

[@EweChewBrrr01]

Instant pulse jet. Just add water.

[@wjackstl]

hands down, this is the greatest channel on youtube

[@EvoAirsoft]

How would you even explain this to someone if you sold that truck? Person Buying:"So whats with the burn marks on the back of the truck in the bed?" Colin: "Well see, one day I got bored, and I was like "I'm going to build a pulse jet" and after building it, I wanted it to self destruct it caught on fire in the bed." Person Buying:"I see, i see."

[@theblukatlife]

While petting a cat and saying "interesting"

[@alecrafanan1578]

show him the video

[@heyitschinoable]

+Krizx600 Haha lmao

[@Oo_Grimmel_oO]

+GameGruffs id buy that truck, hard to get one of those in my country lol

[@MadScientist267]

You're overlooking the idea that it's Colin Furze selling the truck... The explanation almost wouldn't need to happen... Surely a pulse jet was involved... This is assuming the truck didn't become a projectile in the next trebuchet or something 🤣

[@fortj3]

You, sir, are insane. Don't ever change. The world needs more of your kind of insanity.

[@r.j.bedore9884]

Just wanted to point out that hydroforming is usually done by inflating metal tubes inside of a mold using water pressure, kind of like blow molding with plastic. The pressure washer was pretty ingenious though. I've been thinking about ways to do this to make bike frames and such and a pressure washer never occurred to me. Good on you, sir!

[@cyrilgigee4630]

I just started watching this channel and wow... he seems like the happiest most energetic man in the world. And I guess I would be too... famous KZbinr and 5 world records. Jeez...

[@axtmann]

Bless you Colin. You truly make the internet a better place.

[@paulvroeg]

Colin, how did you calculate the angle of the bend in the template so that the bend would be 180 degrees when hydroformed?

[@colinfurze]

i did it 180 first which curled over it self so kinda knocked what degree that one went over by of the next one but you can do it by measureing the lengths of the inner and outer edges from start and finish of the bend

[@MostFolkCallMeOrangeJoe]

colinfurze So this was your second attempt ?

[@colinfurze]

3rd i think

[@_gungrave_6802]

+colinfurze as always, Measure 1st, fuck up the 2nd and get it right the 3rd time lol

[@damianwallace7726]

+colinfurze what's the name of the Charles song?

[@Silvertarian]

The things this guys does with the very minimal resources he has amazes me.

[@kavalogue]

He has almost unlimited resources that’s where your wrong.

[@marcwire9332]

Fantastic, the best video on hydro forming on youtube! please post the plans to this unit, I have to build one! Thailand will never be the same again!

[@billbergen9169]

Start bombing germany lol.

[@powder-phun949]

WOW! The automatic subtitles on this one are the best I've seen ever! "Time the shit. yeah, you can use me as well. Sister chat do yeah" "My name's this page the goodnight shit you shit" "The Russians like to send those she wasn't really hot make may guys" "bed bug i went by Jared imploded"

[@Jonny-ub9mw]

"You can use MIG but TIG is better" Yessss Colin that's what us TIG welders like to hear 😂😂

[@silentquad]

that's the easiest pulse jet build I've seen, well done sir!!!!!

[@Sohave]

Your truck realy gets a rough treatment sometimes, maybe you should make it fire and explosion proof. That could be a nice idea for a build, a truck that can withstand everything you regularly need to do with it, firework proof and made so it can withstand the heat from a pulse jet complete with attachments and brackets that allows it to hold and adapt to future projects, sort of a furze mobile!

[@paulluce2557]

Yes... his poor old truck gets brutal treatment... I think it deserves its own KZbin channel....

[@jonathantang6414]

It's a hilux. Watch the top gear episode where they tried to destroy a toyota hilux pickup but fails to.

[@weshall8598]

Seeing the metal blowing up looking like plastic was insane, great video.

[@TheGooddog3]

This guy is the evil genius of maniacal awesomeness!!

[@gregistopal]

Colin breaks every rule there is and it's allways awsome

[@bukt]

Can you make a really really small pulse jet? Like the smallest one you can make? :D

[@stonesie81]

Check out his 'Jettle' video, a pulse jet in a kettle...

[@cartercarrio6401]

You can make a pulse jet in a mason jar

[@theepicchickenyt]

@@cartercarrio6401 I did a few days ago and it’s really cool

[@kutregistratie]

You sir are having the time of your life doing stuff like this and I applaud you!

[@patsta9370]

2:20 anyone noticed that beautiful case hardened blue-gem

[@hacky97]

I love it how you use hearing protection, like that's the greatest danger you ever got yourself into.

[@wyndstryder]

You need to put out a soundtrack list, bro Your gadgets and the tunes are top notch =)

[@бахтиерджураев-ш9ъ]

Colin, ты просто КРАСАВЧИК ) собрать ПуВРД стало ещё проще, просто собрать и "надуть" макет - ты гений ! Сорри, если возникли трудности с переводом, но ещё раз Спасибо от всех Россиян =)

[@elesjuan]

How have you not burned down your entire workshop yet with all this welding, grinding, and cutting on the CARPET FLOOR?!

[@ianswitzer3395]

Because you cant burn down an underground steel bunker :D. Better question is, how is he still ALIVE.

[@crimsun7186]

Except that's his shed and not the underground bunker.

[@kuiper921]

+TheoCampbell jesus calm down he didnt know

[@darkangelsoaps8258]

+TheoCampbell Good lord, man. Switch to decaf or smoke some weed and get your head right. You are gonna pop a blood vessel or some shit acting like that.

[@spartonioxD]

@@darkangelsoaps8258 bit of a ridiculous reply but sure

[@taylorporter4167]

This guy is awesome everything he builds is completely genius

[@muh1h1]

just a welcer and a pressure washer... yeah, right, and a plasma cutter, and an angle grunder and a drillpress... still pretty impressive! :)

[@MysticalDork]

Those just make it faster. Theoretically, you could do it with a hacksaw, a file and a hand drill.

[@muh1h1]

That would be a pain in the butt though, but possible :)

[@tornuptom]

Also pretty sure(correction welcome!) that tig welder and plasma cutter are the same thing? or can achieve the same result?

[@MysticalDork]

Nope. Both have a tungsten electrode and a supply of gas to a handpiece, but that's where the similarities end. Plasma cutters have an internal arc and the gas (usually air) is blown through it, carrying superheated plasma with it out the nozzle to cut things. TIG welders create an arc between the tungsten electrode in the handpiece and the material to be welded, and the gas (usually argon, helium, carbon dioxide or a mix) is used to prevent the oxygen in the air from reacting with the molten metal of the weld.

[@GoofyDaGoofGoofTV]

welder*

[@iantonkin1929]

we have just starting using hydro forming at work. The boss gave me a pay rise. thanks Colin.

[@roboform100]

3:12 you can see how much thrust it produces just before destroying itself. Look at the U-shaped brace. Steel bends like paper.

[@lavaboatcubesupportsukrain7539]

I know I’m late but that brace might have been effected by the heat of the engine so I don’t think it’s a good way to show how much thrust it makes

[@kiapyro]

You sir are the coolest man on the internet. If there was a "coolest man on the internet" aware, I'd vote for you.

[@Whatsthegeek]

Fun Fact: Your truc is on fire !

[@wolternijmeijer9876]

+What's the geek truck*

[@taventube2151]

And your truck isnt on fire?

[@StonyRC]

Holy Sheaatttt Colin ... Just when I think your channel couldn't get any scarier! Brilliant!!!!

[@siminye2228]

Why does the jet turn blue? Sry I don't know much about mechanics

[@colinfurze]

its the metal heating up

[@hamfish225]

thats not mechanics, thats chemistry :P

[@burzvingion]

***** Metallurgy, along with the rest of materials science, IS mostly chemistry (along with some physics for good measure).

[@littlefrank90]

hamfish And physics.

[@lordofedges6487]

Ben Crist Isn't all chemistry physics?

[@Rambleon444]

Colin the enigma- Dressed like a yuppy, mind of a mad scientist, attitude of a punk rocker = Pure entertainment!

[@Schizomanicman]

You sir.... Are BONKERS! AND I LOVE IT!

[@mattydoble]

Don't worry Colin, I predict you'll make a perfect sphere in 2023 😅

[@MGPtommo12]

Alright mate looking for the plans for this but cant find them? Do you still have them?

[@thelongranger55]

Been watching you sense the early days , not the beginning but close , best channel on KZbin , he’s doing this for himself and his own entertainment and happens to make a living at it I think , so jealous

[@mboyer68]

To drown out the sound of that pulse jet with that music is a tragedy.

[@Loebane]

This single video was enough to convince me to subscribe to this channel.

[@YeCannyDaeThat]

Omg how long did it take you to TIG all that together!

[@colinfurze]

you melt the top sheet into the bottom without using a rod so does not take that long

[@traversw123]

colinfurze What model Tig do you have, Probably been asked 11ty times - sorry.

[@stevenwarren252]

colinfurze would there be any chance of using a arc welder to weld it together

[@ryanolsen4643]

colinfurze its called fusion welding

[@butre.]

steven warren I've done it with an AC stick. just get about 5 pounds of the thinnest electrodes you can find

[@ikichullo]

2:25 I saw a cig lighter next to the jet. Please don't tell me that you used that to light it...

[@morphman32]

It's said that there is just a hairs breadth between madness & genius. You my friend are truly one very crazy genius. GOTTA LOVE YA! ! !

[@perrish7482]

You remind me of my friend Collin 😉

[@rohanj2621]

Colin always feels like a mad scientist from a cartoon despite the appearance only missing a costume rest is perfect

[@うんちっち-h7j]

群馬からきたぞー

[@pea-tearwingedlion3422]

Nice welds Colin! Well done

[@stubryanfull]

now put it on a kids tricycle

[@Lardianyt]

I have never done any metalwork so I don't think I am appreciating this as much as I should.

[@yaish9646]

lets hope this guy doesn't kill himself eventually , it would be sad to see a great youtuber go

[@Antoniostubeio]

Another fantastic video.... this was the best fabrication using simple tools i have ever seen,amazing,thankyou for sharing..colin you are a legend...

[@lets_windturbine]

Meanwhile in bf 5 a new rocket came out V1 2.0 by collinfurze

[@Milamberinx]

That rocket ain't new, it terrorised the South East of England during an angry period in the mid 1940s.

[@mailmanx69]

Good thing Colin lives in the UK. That flammable beast would be illegal in 57 states!

[@TheAgamemnon911]

Scott Manley sent me here

[@reinier7865]

and me

[@Skidtire]

+Agamemnon FUCK YOUUU ,its a referance to welcome to youtube video by jelloapocalypes

[@benjaminmarks8765]

Agamemnon how?

[@lorgus100]

how is this guy still alive in 2021?

[@certee]

It felt like that engine was going to whip around and burn you up, please be careful!

[@buckhubach2720]

I have always thought about doing that with a pressure washer, nicely done.. never seen anyone actually try it before

[@HappyTreeX1]

love how he goes to touch the still red-hot jet at the very end

[@Sillyzombie666]

he doesnt, he puts his hands infront to feel the heat

[@braintumourgaming1104]

This is why this is the best channel

[@kleetus92]

Um... your steel truck bed is burning....

[@kleetus92]

+xXMAGNONXx I know that... but it's still not something you expect to see!

[@kleetus92]

+xXMAGNONXx lol

[@malachimort7570]

Using a pulse jet and steel burns.. inside job.

[@Hgf578]

Y does this guy not have a billion subs? He is the ultimate insane genius.

[@orestasvanagas9572]

0:40 subtitles...

[@javinskinner2766]

Don't have to use a tig(type of welding) you can use a mig as well, but this(tig) is better. Also hello person from 4 years ago :D

[@Paolobrokko]

I wait for your video as i used to wait for summer break at school. Nice use of this tube.

[@PandaWill89]

It would have been nice to hear the jet sounds instead of the insanely loud music.

[@Progneto]

This is really amazing. It is amazing how much power water has.

[@tanner7730]

I wanna hear a version of this without the music just the expansion chamber

[@willierants5880]

Holy cow, Colin just hit 8M and he's almost halfway to 9M!

[@TheBirdbearfrog]

I'm going to this guys house when the zombies come...

[@covid-20lit41]

Colin you remind me so much of myself! Keep having a blast man!

[@Petersilie-vm8wz]

do a boat with this technic

[@daleezzell7821]

Sounds like an awesome idea. You could make a boat and have it propelled by pulse jet.

[@Petersilie-vm8wz]

Hell Yeah a Loud fast boat!!

[@stevebirks134]

Just amazing ! - No Struggling - Less sweat in making this than your first pulse jet - interesting to see it moved into shape when you cut it Colin it seemed too wide - But as it were inflated - the ends sort of moved together We will have to remeber that !!! - More of that V to that to that U - keep up the good work mate !

[@astropeter5434]

This guy forgot to take his medicine today

[@E.T-the-alien]

To be honest Colin, you're a genius...

[@tonyjordan56]

You are freakin' insane. I'd love to party with you.

[@paulbains9152]

I loved your hydro-forming technique , can see lots of other uses for making exotic shapes , Thanks !

[@rebelarcher5450]

Would have been nice if you had pissed the stupid friggin music off so could actually hear the fukn thing run

[@nicstroud]

When there's a place up for grabs on Top Gear, if you aren't on the shortlist the BBC will have missed a trick.

[@trowhammerdespoilerofgalax2423]

I haven't checked to see if you are still alive but in one video I've learned that hydro forming metalics is a thing, that it can be done easily and that you're awesome. I've subscribed and Favorited. Boy I hope you didn't kick it.

[@TheFishboy66]

Besides the fact that you are a bloody genius Colin you just crack me up every time with your excitement at the success of your projects. Keep up the good work mate.👍

[@danielvanniekerk7084]

If someone showed me this video without explaining context, I would have thought you were mad, but, as they say, there's a fine line between brilliance and insanity. I would be inclined to vote for the former. Unique forming process, basic design, and best of all, ITS A JET! The inner 8 year old can hardly contain himself. :P

[@VinnieVincent100]

Incredible how you do things and they actually work. Great job!

[@piketubeman]

I like this guy so much I don't even want to mention all the Coc he seems to be on.

[@sonydroid2253]

Mr Furze. You r officially a superhero! keep the videos coming!! how about a monstersized homemade cnc router/milling machine that can mill a spaceship...well maybe not a spaceship but maybe large bits of metal or wood!

[@eadohayut214]

Throughout the video i felt like i was watching an action movie! Instant sub!

[@albertpolak786]

I like this approach - truck is on fire, pulse jet is so hot it will be all gone in a moment, burning tons of expensive gas - but never mind, it is a great fun!

[@CalamityKim1]

You never cease to amaze me.

[@XZenon]

Quite a surprising music choice for this video. I like it.

[@ansi6624]

That was real nice Colin. Enjoyed watching it.

[@justinbellpa]

I love your videos! It's like watching a mad scientist to an awesome sound track! CHEERS!

[@Beef_Strokinoff]

I've been looking for this video for years.

[@ryancraigrice]

Best thing I have seen in a long time!! Epic job Collin

[@nathanaeljames09]

I watch this video when it first came out 7 years ago and now I'm watching it again cause we tackled the pulse jet in my course.

[@kongchingpow]

Colin....you are a mad genius, and I love you!!!

[@CrossWindsPat]

Wow that thing started to make some serious thrust at the end there when it was getting really hot! Enough to cave in that metal! Hydroforming is very cool indeed!