do the knobs and faders work in mackie control mode as volume adjust and panning in Fl?
@VoodooGMusic4 жыл бұрын
Yes they do. The control section in Mackie mode automatically maps to the mixers volume, panning, and solo/mute. I don't see much use in this however, since you have such a small travel time on the faders, furthermore the screen on the Code is too small and crude to really make out what's happening, you have to look at the computer screen anyways to see what's going on. Generic links, and controller links will not be removed if you switch to Mackie mode, they will just become inactive for as long as it is enabled.
@pandanda6564 жыл бұрын
VoodooG thanks for the thorough answer... i was looking for such info for a long time
@VoodooGMusic4 жыл бұрын
You're welcome mate :D
@pandanda6564 жыл бұрын
@@VoodooGMusic hey so i basically just bought it, also following the instructions in your video, but somehow in mackie mode my code does not want to automatically map to mixers volume pan, and mute. Is there anything specific that needs to be done in order to make it work
@SemaphoreNewgrounds2 жыл бұрын
I had to rewatch some parts 10 times because I could not process and redo it myself in that speed but this is one of the most helpful videos I've seen for the Maudio code 61 and FL studio, this is exactly what I was looking for. subscribed ^_^
@sidewest6669 ай бұрын
I watched some videos on how to integrate Code61 in FL. Nothing worked for me. Since your video it works..Great.. THANK YOU!👍
@hillyvibemusic3 жыл бұрын
man!!!!!! you saved me from throwing my code 25 out of the window.... thank you so much...
@VoodooGMusic3 жыл бұрын
You are welcome!
@benoitchavet88933 жыл бұрын
Dude your video helped me a lot. You're my mentor for code 25 haha. Thanks a lot.
@jayarecordsofficial2 жыл бұрын
CODE 61 x 20.8.4 ! You are a Life Savior ! much love from Sri Lanka!
@VoodooGMusic2 жыл бұрын
Happy to help!
@xkernalsandersx4 жыл бұрын
Good lord this video just saved me so much headache. Thank you!! ☺️☺️☺️☺️☺️
@VoodooGMusic4 жыл бұрын
Glad I could help :P
@salming83767 ай бұрын
Really helped me thanks
@VoodooGMusic7 ай бұрын
You're welcome!
@phamkimlongle28154 жыл бұрын
Thank you, you really helped me there. I even understood everything you said. Btw are you perhaps from germany? If so, greetings from germany :D
@VoodooGMusic4 жыл бұрын
Yes I am! And you're weclome!
@vedasartham3 жыл бұрын
Thank you very much for the guide. I have M-Audio Keystation61MK3 could not able to have midi control keyboard with FL Studio 20. Kindly help to get the control. Thank you in anticipation.
@anthonybonhomme78463 жыл бұрын
Thx buddy ! You made this really sweet and easy !
@VoodooGMusic3 жыл бұрын
Glad it helped!
@zackachu Жыл бұрын
Thank you so much!
@dajiedsuchiang56623 жыл бұрын
I have a doubt why is my FPC drum not linking with my pads? Ive tried and it didnt worked uk and also i gave it channel 4 for FPC but its not working please help!!
@valentinmueller85284 жыл бұрын
That was super helpfull! Now my inner Bard, can finally feel free xd
@byrdsdawurd54523 жыл бұрын
THIS VIDEO SAVED MY LIFE....I HAVE A QUESTION FOR YOU NOW....I CAN STOP, PLAY AND RECORD FOR THE MIDI BUT WHAT I HAVE TO CONSTANTLY "UNDO RECORDING" FROM FL STUDIO....IS THERE A WAY I CAN BIND A KEY FROM MY MIDI TO UNDO RECORDING?
@VoodooGMusic3 жыл бұрын
No there is not unfortunately.
@zen-kq2yy4 жыл бұрын
amazing! thanks a lot dude!
@VoodooGMusic4 жыл бұрын
You're welcome!
@cassiusfocusyn21772 жыл бұрын
First of all thank you very much for your video, everything works except the play, stop, record, and rewind keys. Can you help me?
@springintveld4 жыл бұрын
thank you so much for making this video!!!
@VoodooGMusic4 жыл бұрын
No problem 😊
@smor532 күн бұрын
when I go to the code editor download link in the description it says "The page you were looking for cannot currently be found" is there any way i can download it?
@VoodooGMusic2 күн бұрын
I cannot find a new link for these editors, it seems M-Audio has removed all official support for these keyboards, which is a shame. If you look into your keyboard manual there are ways to do everything I did here from the keyboard itself, but that will be very tedious and take a lot longer. Sorry.
@lucbue97204 жыл бұрын
Thank you for this video. But where do I downlode the code editor? Thx for your help
@VoodooGMusic4 жыл бұрын
Video description :D Download the correct one for your keyboard.
@EmanuelRodriguez3 жыл бұрын
Wish there was a tutorial like this for the Axiom 61
@Mg-bg7ex2 жыл бұрын
Strange send preset is greyed out on my software cannot select it after saving my presets on keystation 49
@Legoloup3 жыл бұрын
My code 49 says that the preset has been successfully sent but there is not change on the keyboard even when changing presets to refresh
@arthuryarashev23813 жыл бұрын
Thank you so much for this video, I could not figure it out with this keyboard for a long time. I have a question, namely: how to increase the sensitivity of the encoders? I tried to do this through the global settings in the preset editor, but the settings are reset every time. I would be very grateful for your answer!
@VoodooGMusic3 жыл бұрын
You're welcome first of all! Concerning the encoders, I don't know if there is a way to permanently change their sensitivity, I've never felt the need to do that, so I cannot help you there. But if you do end up figuring it out, please let me know.
@Chomik264 жыл бұрын
Will it work on M-audio code 25 with fl studio 20.7.2?
@VoodooGMusic4 жыл бұрын
Provided you use the correct editor I.E. the one for the Code 25 and follow the steps accordingly it should yes.
@Chomik264 жыл бұрын
VoodooG Ok, Thanks!
@timtellstrom22374 жыл бұрын
this is brilliant thank you! But i have trouble switching between diffrent channels, ex i cant switch from fl keyes to nexus on my keyboard. When i hold down the shift button and press the arrows nothing happens. Have I done anything wrong?
@VoodooGMusic4 жыл бұрын
Check if the drums are permanently linked to an instance of FPC, that for some reason disables this feature in FL. If not, you have done the setup incorrectly, check your midi controller section in FL Studio, if that one is set up like in the video, check your code editor preset, if that is also set up correctly, contact Image Line support.
@gustavkonzack97332 жыл бұрын
can u pls help me, i made everything channel 4 of the pads but it doesnt work. There were only some random lights but nothing more. please help me idk what to do. If i root everything on global channel it doesent work too. If i work with the preset editor, the pats dont work!!
@orlandoblack75843 ай бұрын
THANK YOU
@VoodooGMusic3 ай бұрын
You're welcome!
@t_playerpositif80273 жыл бұрын
Are the sounds from the fl studio or the keyboard
@VoodooGMusic3 жыл бұрын
The sounds are from FL Studio. The M-Audio Code is not a synthesizer or electric piano, it is a keyboard controller, meaning it does not produce sound by itself, it controls other devices that do, in this case the plugins inside FL Studio.
@MrLetthemknow1233 жыл бұрын
great work... sounds like the manual in person lol
@dmkproject28092 жыл бұрын
how to configure rec and plan buttons in m audio code 25
@stewbeats31714 жыл бұрын
Very helpful, I got my sliders to work however I was playing with them and they stopped working , not sure what happened
@VoodooGMusic4 жыл бұрын
Maybe you switched the bank for the sliders by accident? Also this part of the set-up is project specific so I recommend mapping everything out on a template project.
@stewbeats31714 жыл бұрын
@@VoodooGMusic yeah I ended up figuring it out lol it was the bank
@Zerk_074411 ай бұрын
when i set up the code 61 and send the preset to my keyboard, only fews button lights on. why?
@VoodooGMusic11 ай бұрын
This could be caused by a few things, I suspect you started editing from a preset that has altered lights. Like any other parameter you can alter the lighting of the buttons different states as well as the states themselves from the editor. Have a look at those and compare everything in the editor to how it looks in the video.
@Zerk_074410 ай бұрын
@@VoodooGMusic thanks
@nathanrex18813 жыл бұрын
ive done everything in this video and fl studio still doesnt recognize my midi controller, any help would be appreciated
@VoodooGMusic3 жыл бұрын
So first things first, do the lights on your keyboard work? If no, have you checked if it is actually turned on? If it is, but there are no lights, the device is broken. If the keyboard does light up properly then the problem might be something else. If FL doesn't recognize it at all, it might be broken, test it out in another DAW if you don't have one, use Waveform Free it's free and works on all systems, if Waveform also doesn't recognize the keyboard, contact M-Audio customer support. If Waveform DOES recognize it, but FL still doesn't then contact Image Line support. I hope I could help you.
@nathanrex18813 жыл бұрын
Yes I my lights on are, my keyboard accepts the presets and even shows the name of it when changed over. But whenever you’re in fl studio the little knob icon that lights up whenever a midi key is pressed isn’t lighting up for me. Are the ports of importance? I read something about it today saying certain ports correspond with the midi in certain ways and i plan on trying that later. Thank you for the reply
@mokilucky89993 жыл бұрын
The pads and the other buttons work, but the keys doesn't work, can you help me?
@VoodooGMusic3 жыл бұрын
have you enabled the correct midi controllers in the midi settings for FL Studio?
@mokilucky89993 жыл бұрын
@@VoodooGMusic i have M-audio code 61, Fl studio 12.3, it used to work before and now it doesn't! I enabled (generic controller) i think it comes from the perset editor, i really don't know how to use it, to activate all the keys.
@VoodooGMusic3 жыл бұрын
@@mokilucky8999 First thing I suggest is that you update your software to FL Studio 20.7. Then I suggest going to the Wonders of Sound discord server, there you can reach me directly and I'll be able to provide some help.
@mokilucky89993 жыл бұрын
Thank you so much!
@mokilucky89993 жыл бұрын
@@VoodooGMusic I would maybe need a keygen for Fl studio 20.7? i have to create a discord account and i'll write you. Thanks!
@hosham16263 жыл бұрын
how do i set up my master wheel ? my pitch wheel is working but my master is not working if i try to adjust it in fl there is a ? on in the left top corner pls help
@VoodooGMusic3 жыл бұрын
Click on view, remote control, and on the left a drop-down should open, there you should see the modwheel, select it and move the modwheel. If it doesn't show up, contact Image line support.
@Phil-R Жыл бұрын
The Play, Stop, Rec buttons etc. don't work when I push them. Don't know why ^^ I'm having the FL Studio 21. Is there any way to map them manually?
@VoodooGMusic Жыл бұрын
Please check if you have Midi In 3 enabled and set to Mackie Control Universal. If it still doesn't work, you're SOL there's unfortunately no way to map these buttons in FL Studio manually.
@Phil-R Жыл бұрын
@@VoodooGMusic Thx for your answer. Midi In 3 is enabled and on Macki. Too bad. Don't know why it doesn't work. But thx for your help :)
@peterparker17382 жыл бұрын
the problem is if i do the FPC thing and setup drums and "receive notes from" - its locked... and if it is locked then my keyboard let me not change to another instrument with they Shift up/down buttons on the Keyboard!! ANy Help Idea??? I really need an independent DrumPadThing, that makes sounds... no mater what Instrument I simultanly use
@VoodooGMusic2 жыл бұрын
I have encountered this problem as well, I don't think there is a solution for that unless you wanna try your hand on midi scripting. If you manage to find a solution that way, please share the script with me. Wishing you luck.
@peterparker17382 жыл бұрын
@@VoodooGMusic is it maybe posible to solve it with changing the octave... if i have the drums set on an octave which is very low.... so it is not on my real keys in front of me anymore... because its just very low on virtual keys like C2 or C1.....
@peterparker17382 жыл бұрын
@@VoodooGMusic or could it be that i load the same keyboard new in as a NEW other device... where only the drumpads are activated?
@kalithekidmusic37614 жыл бұрын
Thank you for this !! how do i set after touch please ? (for example with omnisphere)
@VoodooGMusic4 жыл бұрын
Omnisphere should automatically work with aftertouch, go to FL Studio, view, remote control, and a little list on the left should open, where you have pitch wheel, modwheel and aftertouch, if those aren't there contact image line support, I have no idea what makes them show up or not these seem to be present only when they want to be.
@kalithekidmusic37614 жыл бұрын
@@VoodooGMusic ty for your quick answer. I have this in remote control but still didn't worked. But i find out how to solve it. Let the tip if another one struggle Solution: Current project, generators, omnisphere, MIDI Channel Aftertouch, right click, reset, accept. Go back to the same parameters, right click, on ctrl right click, channel after touch, accept. Remote control, Omnisphere Midi channel aftertouch, left click, set the port on 0, accept and it works
@VoodooGMusic4 жыл бұрын
@@kalithekidmusic3761 Wow. That is quite the Hassle. But that's the deal with FL Studio, if it doesn't work right away, you gotta jump down the rabbit hole, but glad you figured it out, and thanks for leaving the answer here!
@kalithekidmusic37614 жыл бұрын
@@VoodooGMusic no pb, thank you for your vid, I was using my keyboard wrong since 2 years ago, this heleped me a lot
@Cynid333 жыл бұрын
How do you access the editor?
@VoodooGMusic3 жыл бұрын
Download link in video description.
@aledeavollo38913 жыл бұрын
Hi friend. Do you know how to set up a Delta 1010 LT for FL Studio? Could you please help me?
@VoodooGMusic3 жыл бұрын
I have no knowledge of this device, unfortunately.
@andreasferstl46813 жыл бұрын
How do you get a preset on the keyboard I can't set it to Codus I have PRE01 can you help me?
@VoodooGMusic3 жыл бұрын
Rename it in the editor, send it to the keyboard, select it in the keyboard. Rewatch the video, pay close attention, try again.
@ZotasBeats3 жыл бұрын
please, put the code 61 preset for FL in download link =)
@boitimtoi220311 ай бұрын
When my midi is plugged into the computer, it has a very annoying delay. How to solve it?
@VoodooGMusic11 ай бұрын
You need an audio interface to solve this issue. Your motherboards soundchip and PCs sounddriver are not designed for real time midi processing, you need a dedicated soundcard. I recommend the Komplete Audio 6 but honestly any USB audio interface above $70 should be more than sufficient.
@boitimtoi220311 ай бұрын
@@VoodooGMusic lovely !
@boitimtoi220311 ай бұрын
@@VoodooGMusic thanks mate
@hashangunarathne4 жыл бұрын
❤❤❤
@BartaSparta5 ай бұрын
The "Up" and "Down" on keyboard does not get me the preset I just copied from the video :( Help?
@VoodooGMusic5 ай бұрын
This works if you overwrite preset one, perhaps you saved it onto a different slot on your keyboard, try seeing if it ended up anywhere further up?
@BartaSparta5 ай бұрын
@@VoodooGMusic No it just does not send the preset to the keyboard, I even tried to send it to preset 12... do you have any ideas? I'm clueless
@VoodooGMusic5 ай бұрын
@@BartaSparta Hmmm not sure honestly ... that being said I haven't done this in a while. I'm not sure if M-audio still provides customer support for the Code, but if they do, you might be able to to ask there.
@Shy_D3 жыл бұрын
I heard that this midi sometimes doesn't connect to fl studio, is it right?
@VoodooGMusic3 жыл бұрын
I haven't had this experience personally, tho an older iteration of the keyboard did freeze once.
@SakshinA24 жыл бұрын
Thanks, bro :)
@VoodooGMusic3 жыл бұрын
Any time
@abcdabcd32354 жыл бұрын
the m audio code editor can't installed on my Mac because it has to be updated, can someone help me??
@YUNGLEON50003 жыл бұрын
Is there a way to set up my keyboard so that each row of the pads always automatically is binded to channel 1-4 of my DAW? Maybe it was explained in the video and I didn't understand it?
@VoodooGMusic3 жыл бұрын
Yeah you can do that in the Code editor, I talk about it at the start ofthe video.
@YUNGLEON50003 жыл бұрын
@@VoodooGMusic Thanks for your reply! But that doesn't work for me. I want each pad bound to 1 sound on the channel rack when creating i.e. the Basic 808 template. When I did what you did in the video, the pad always play the sound that I currently have selected in the channel rack.
@luyizhou19944 жыл бұрын
I have set up the keyboard as you said. But the notes I played on keyboard is higher and I can't switch it back. Do you know what's the problem with that? Thank you
@VoodooGMusic4 жыл бұрын
have you pressed the octave up/down buttons? Is the midi route note in FL set to a different one than default C4?
@luyizhou19944 жыл бұрын
VoodooG thanks for your help. I fix it.
@t_playerpositif80273 жыл бұрын
Where do you find the sounds?
@dajiedsuchiang56623 жыл бұрын
Bruhh i also mean to join your discord but the link expired!!
@VoodooGMusic3 жыл бұрын
This discord server no longer accepts new applicants and is due to shut down soon. It's spiritual successor will be Shallies patreon discord, which is currently under construction but can already be joined.
@productionbyjonezzz Жыл бұрын
Hello, I can't get the (codus) preset from the preset editor on my code61. when I press the up arrow, it switches to PRE 2 (Preset 2) and when I press the down arrow it switches back to PRE 1 (Preset 1). When I send the preset to my device, it still gives me the message that it has been transferred. I've already reset code61... Without success. Can sombody help me? pleas
@VoodooGMusic Жыл бұрын
Did you change the preset name in the preset editor top right? It sais "CODUS" for me because that's the name I gave my specific setup, I neglected to mention that. The functions you changed should still have applied.
@productionbyjonezzz Жыл бұрын
Thanks for the answer. I changed the name in the upper right corner and I had already thought that the name would be irrelevant. I also tried another name. It still doesn't work. :/
@productionbyjonezzz Жыл бұрын
@@VoodooGMusic can u help me pls?
@babyslickj3 жыл бұрын
There isn't a button for switching between pattern and song mode on the Code, unlike on some other controllers. Any idea if it is possible to link a button for it so I don't always have do the switch using my mouse?
@VoodooGMusic3 жыл бұрын
Unfortunately these DAW controlls can for some reason not be assigned manually. Why Image Line chose to do it that way is beyond me. You may find a way to do it using midi scripting, but that whole process is so confusing and unintuitive that I have never tried it, perhaps you can find a script that allows you to map transport and navigation controls to midi events.
@babyslickj3 жыл бұрын
@@VoodooGMusic Alright, thanks for the info
@prod_vires75933 жыл бұрын
Hey bro, my keyboard doesn't appear on the FL Output and Input Midi Settings, and I have connected to my pc and have dowloaded the firmware. And in the Digital little screen on keyboard doesn't appear Code 61, appears something else, and my friend got the same and it appears Code 61. Midi Keyboard: M-Audio Code 61 Black. If you can help me I really would appreciated, thx
@VoodooGMusic3 жыл бұрын
Update, drivers.
@prod_vires75933 жыл бұрын
@@VoodooGMusic what drivers? I already installed the firmware, so the drivers should be updated
@VoodooGMusic3 жыл бұрын
@@prod_vires7593 Then contact M-Audio support.
@bdxfhsf2 жыл бұрын
How to keep the screen Display fixed on to the Bank Display or fixed on until I touch another button/control for example. Mixing on the fly in CODE25 is a little problem where I want to switch banks for the next set of controls/faders etc I forget which bank I am in so I sometimes go from A2 into A3 instead of back to A1. Just checking in to see if there has been an answer to this but I will contact m-audio support, thanks anyhow
@MA-kx4sx4 жыл бұрын
Wooooow
@ajith34364 жыл бұрын
Send Preset Option in not Working in Mac(muted)...Any suggestions please?
@VoodooGMusic4 жыл бұрын
Is the Code connected to the computer? Obviously you can only send the preset if the device is connected via USB.
@ajith34364 жыл бұрын
@@VoodooGMusic I tried in WIndows and its working fine,seems some bug in Mac...Thanks for your video..Very Useful
@VoodooGMusic4 жыл бұрын
No problem. Contact M-Audio support about the issue, they may be unaware of it.
@spaceshiptripp4 жыл бұрын
Code stuff bro
@alvinzzzarocker3 жыл бұрын
Heyy! is it compatible with fl 12?
@VoodooGMusic3 жыл бұрын
Possibly. I would still recommend upgrading to FL Studio 20.8 Image Line offers lifetime free updates so if you have purchased the software it should be no problem to upgrade.
@alvinzzzarocker3 жыл бұрын
@@VoodooGMusic alright man thanks a lot
@psalmofsongsliveworship37474 жыл бұрын
How to connect m audio code 61 to amplifier?
@VoodooGMusic4 жыл бұрын
You don't. The Code is a controller keyboard, not a synthesizer or digital piano. It does not produce any sound by itself, it has to be connected to a computer or an external synth module via USB or midi.
@SakshinA24 жыл бұрын
My volume is too low can u help me out please 😬
@VoodooGMusic4 жыл бұрын
Turn up the volume?
@SakshinA24 жыл бұрын
@@VoodooGMusic when I use pads with fpc the volume is quite low. Rest all is ok
@VoodooGMusic4 жыл бұрын
Ah. Change velocity sensitivity. You have it set too low. You can adjust the curve inside FL Studio.
@belkacemmoulay1135 Жыл бұрын
It doesn't worke for me !?
@VoodooGMusic Жыл бұрын
What seems to be the issue?
@phlowjaxx4 жыл бұрын
Shout outs to the Half Life fans ;)
@VoodooGMusic4 жыл бұрын
Alright :D
@rustyhangerabortions3 жыл бұрын
You say MIDI 2 and 4 aren't important for FL Studio, but what are they used for?
@VoodooGMusic3 жыл бұрын
In FL Studio they are free channels for midi notes and/or controller assigning, they do not have a predetermined function as far as I am concerned.