HYUNDAI GENESIS COUPE WHEEL BEARING REPLACEMENT

[@_ZeRAuJ]

Going to be doing mine this weekend. Is it the same process for the rear hubs? I'm doing all 4 regardless but any guidance goes a long way. You said 15mm or 17mm for the 4 bolts on the back of the hub?

[@LoniVlogZ]

It's not the exact same because you will have to remove the axle nut other than that it's basically the same.

[@_ZeRAuJ]

@@LoniVlogZ Any source to remove the axle nuts? I'm looking and barely see anything.

[@LoniVlogZ]

@@_ZeRAuJ it's a 36mm nut at the end of the axel if I am not mistaken and you just take it odd then there should be 4 bolts in the back just like the front might be tight back the plus the handbrake shoes won't make it easy but it can be done without taking it apart.

[@_ZeRAuJ]

@@LoniVlogZ It was a struggle but I did it. I'll try to create a video about it but I did end up getting abs lights. 😅Guess the speed sensor went out

[@LoniVlogZ]

@@_ZeRAuJ good stuff 👏🏾 👏🏾👏🏾... and that most likely is because of the speed sensor. They are fragile especially when they have been on there for sometime.

[@daylinkapec-allen7044]

Just had to replace my wheel hub. Connection went bad and corroded my wire and connection behind the wheel hub. Helped out lots! Thanks ! Btw i live in Ontario too so it was cool seeing a familiar plate👌

[@LoniVlogZ]

Happy the video helped and hope to see you around some time 👌🏾

[@malgusdarth7725]

Thank god bro, I needed this video ! Came in clutch

[@LoniVlogZ]

Glad I could help 🙏🏽

[@tylerhunt4983]

love the work, keep up the work

[@LoniVlogZ]

Thanks will do

[@Hector-ht4sy]

Hi what are the tools used for in this video?

[@LoniVlogZ]

Just generic tools you can use a socket set or wrenches.... It's been a couple of years now I don't remember the exact tools I used but a basic tool set would get the job done

[@Christ-1]

Nice, but i would suggest jacking up on front cross member using a length of 4x4 to spread the load. Pinch welds are for scissor jacks and easily damaged.

[@tobagoak3014]

Showing love, jokes, just mamaguyin he for free oil changes in the future lmao

[@LoniVlogZ]

Lol 🤣 😆 🙏🏽

[@hiddenrainn]

At what speed was the rear shaking? Mine shakes over 100km

[@LoniVlogZ]

@@hiddenrainn my rear wasn't shaking just the fronts and that was anything above 60 km/h

[@frankellyqqalmanzar5598]

Elloni the Mechanic lool🔥🔥🔥🔥🔥

[@LoniVlogZ]

Lol something like that

[@123krill]

Just ordered the same wheelhub part you used (WH513278T), how has it held up so far (one year later) still good?

[@LoniVlogZ]

It is still good so far no problems at all

[@123krill]

@@LoniVlogZ Thank you for the update, good to hear :) Will be getting them on tuesday next week, bit of a delay to get them shipped from the states to my country.

[@LoniVlogZ]

@@123krill oh nice which country do you live in?

[@iversonjcameron]

Front is easy....rear takes some time......236k 15 Coupe.....love my 3.8....but plastic peeling now on paint

[@LoniVlogZ]

The rear takes more time because you have to deal with the parking brake

[@ADollarAndAWrench]

Great job brother

[@LoniVlogZ]

Thanks broski 🙏🏽

[@OLDSOULCHALO]

How big do the MM bolt removers have to be to remove the nuts from the front driver's side?

[@LoniVlogZ]

Which part if it's the bolts holdout the wheel bearing it's 17MM

[@OLDSOULCHALO]

@@LoniVlogZ the 4 bolts holding the wheel bearing is 17MM?

[@LoniVlogZ]

@@OLDSOULCHALO if I remember correctly it's been over a year since I did them

[@eltony69]

Bro the bearing need grease or not?

[@LoniVlogZ]

You don't need to grease these if you look at it there is nowhere to add any

[@damianopro7240]

Did it fix the shakiness?

[@LoniVlogZ]

It did for me.....make sure to check your control arms as well and also make sure your wheels are balanced.

[@anthonylopez9727]

@@LoniVlogZ what was the main reason you replaced the front hubs bro? I’m just having trouble with my 16 3.8 rspec, I hear a loud clicking noise everytime I’m on 1st gear and I’m around 1500rpms, any thoughts on that ?

[@LoniVlogZ]

@@anthonylopez9727 no idea what it could be without hearing it and where it's actually coming from it could be anything even a transmission problem

[@LoniVlogZ]

@@anthonylopez9727 and the main reason I changed it was because of the shaking and as you can see in the video they were bad

[@anthonylopez9727]

@@LoniVlogZ sounds good appreciate the reply/help brotha, stay safe 🙏