Hyundai I10 full service with basic tools(Detailed)

[@prince_kingdomm]

Please make video on Gearbox oil change for i10

[@Soulenergy31]

God bless u bro! Thanks for such an informative video

[@ganamaran]

Nice job, good motivation like chrisfix, please add spec of the consumables. Thanks

[@sandysutb]

Very well explained and informative video. Thanks

[@ingalway]

Excellent video. Thank you.

[@yogeshjaiswal4111]

Very well explained process from an expert .

[@diyguy7378]

Mr jojo 007 , Thanks for appreciating my work....

[@inaciocfernandesfernandes7890]

Informative video nicely explained thanks for the video

[@economics1998]

very nice video. where you got Hyundai genuine spares.

[@PlayJewel]

economics1998 there are many shops dedicated to selling genuine hyundai parts. Or u can buy online from websites like boodmo.com

[@economics1998]

@@PlayJewel Thank you

[@ayushmanmukherjee7556]

Great video! Very detailed and informative.. keep up the good work! And I had a question! Hyundai recommends 20w40 or 20w50 mineral oil from Servo in Santro Xing (2005) So my question is should I go with 5w30 synthetic or just stick to the manufacturer's recommendation?

[@diyguy7378]

Please follow what is written in owner's manual. Regarding oil grade, it remains the same whether its synthetic or mineral oil.

[@kalimyasin9016]

Aur petrol car ka sirvish dekhayye

[@moguaii]

Thanks from Europe

[@briananderson6316]

Nice video good work 👍🇬🇧

[@diyguy7378]

Thanks Brian Anderson

[@bankniftytommorow]

Sir please make the video on coolant change of same car (i10)

[@diyguy7378]

Dear, I had flushed coolant 2 years back only, will check if change is required will definitely change it and upload video as well.

[@bankniftytommorow]

@@diyguy7378 Ok sir ji.

[@adrianbadea1179]

How to change the air filter for clima? 🤔🙄

[@RakeshKumar-sx4dp]

Make service video of Santro Xing

[@GauravSingh-bs8en]

Nice one parformas Yaar

[@briananderson6316]

Can you tell me which Spark Plug Hyundai recommend for the 2010 i10 with the 1.1 engine please.

[@diyguy7378]

You can use Bosch or NGK

[@tnamen1307]

Please show how to check resistance on spark plug HT cable wire hyundai i20???

[@shivakumar-ld4tn]

Namaste, What is the NGK sparkplug no,. For 1.2 kappa engine.

[@sharatkumar2671]

What is the size of oil filter wrench cap ?

[@diyguy7378]

Hi, I don't see any size defined on socket, what you can do buy filter from auto shop and take that to tools shop and ask for socket to open it.

[@makwanasunil79]

I10 car 80 ki speed hone par vibrat karti hai, kyaa problems ho sakta hai

[@diyguy7378]

Car ke tyre check karwao, tyre ful gaya hoga...

[@jaywest7479]

Is it always the good to use the old oil on the seal

[@diyguy7378]

Yes, no issue in that. I don't want to use my hands in new oil 😀

[@hiteshkharbanda1527]

How to check coolent in Hyundai i10 Bcz Coolent Box Mouth is very small So how can we guess about the same Pls reply

[@diyguy7378]

Coolant level is clearly visible in container check in day time, to check quality use screwdriver and insert it in box, coolant should be green in color.

[@رضوان-ك7ط]

جزاك الله خيرا وبارك الله فيك

[@sameer9446]

Very good vedio bro

[@akshunyabajpai9286]

Speak Louder. Are you on tbhp?

[@diyguy7378]

Akshunya Bajpai Hi, No I am not on TBHP.

[@rahulbadgujar9918]

What is ur tyre size... Do they affect handling

[@diyguy7378]

Its 175 70 R13, handling would be better but you have to compromise with average.

[@briananderson6316]

Where is the MAP sensor located and should it be cleaned also ?

[@diyguy7378]

Hi, It's on throttle body, you can clean it using STP carb spray cleaner.....

[@Lebethu]

Thank you

[@makwanasunil79]

Bahut baar alignment karvaaya bhirbhi meri car left side khich jaati hai.

[@ScanAlone]

Bhai company se karao bahar se mat krao bahar se steering calibration nhi ho pati vo company me hi krte hai tbhi thik hogi

[@omkarbhambure92]

I am having same car but in this the rpm is high how to. Reduce it tell me

[@sujitdas2855]

Get throttle body cleaned with idle actuator...that should solve the problem, if not than get the sensor voltage checked, for i10 it should be between 3.19 to 3.21volt, the voltage can be adjusted easily from the sensor, just need to unscrew two screws of sensor adjust it and tight the screw back...though a multimeter is required to check the voltage...for better clarity refer KZbin..."idle actuator cleaning of i10" and you will get various videos..

[@AJ-lv]

hw much engine oil is recommended by company.. 3 litres or 3.5 litres

[@diyguy7378]

Please refer your owners manual...

[@m.f.k515]

Mere channel ko subscribe kro me aisa videos banunga

[@honorplay4631]

Good job bro

[@briananderson6316]

Thanks for your reply 👍

[@ankitgoel6sep]

what is the size of socket

[@diyguy7378]

Sorry oil filter socket size is not written on it, go to any tools shop and ask for i10 or xcent oil filter socket...

[@akshunyabajpai9286]

You have overfilled the oil.

[@diyguy7378]

Akshunya Bajpai No we can't fill as we have tight it horizontally.

[@akshunyabajpai9286]

DIY Guy I am saying that you have filled the engine oil above the F mark on dipstick. It is going to damage the oil seals in the long run.

[@diyguy7378]

Hi Akshunya Bajpai I follow owners manual to check all those specifications...

[@kalimyasin9016]

Vistar se

[@PlayJewel]

U should never go under the car without using iron stands. That jack alone is not reliable.

[@diyguy7378]

Dear John I had used jack stand as well, you can check in video.