Possibly the best-made KZbin video I've ever seen. So many content producers yammer about nada at the speed of grandma. You got down to business immediately and wasted no time while being perfectly clear. Awesome! Thanks!
@tuetis5 жыл бұрын
I watched this and paused it at every step for two days while I worked on the car. Thank you for being so thorough.
@NoNonsenseKnowHow5 жыл бұрын
So glad to hear it helped you out and thanks very much for the feedback! Means a lot! I know most of my videos are pretty fast-paced. But I try to cover the topic as thorough and quickly as possible. ( mainly because I don't want to piss off my boss haha)
@randalldunkley1042 Жыл бұрын
My Optima 2.4L lost the balance shaft belt , which took out the crank sensor and the engine stopped. Lucky for me, it did not disturb the timing belt. I was going downhill and also lost power steering. Since this is an interference engine I did not incur the usual destruction of the head and valves. I was able to repair successfully with the help of your video.
@bringthethunder3744 жыл бұрын
Replace you’re crank shaft position sensor too while you are at it! Make sure to route wire as they were originally
@NoNonsenseKnowHow4 жыл бұрын
Never seen one fail on these toyota 3.4l. have you?
@NoNonsenseKnowHow4 жыл бұрын
Oh wait I'm sorry I didn't realize this was on the Hyundai timing belt video. Yes I would agree that's a good idea on these!
@bringthethunder3744 жыл бұрын
Yeah whole different ball game.
@timothygodfrey49502 жыл бұрын
@@NoNonsenseKnowHow THIS IS NOT A TOYOTA...
@frankcorbett63905 жыл бұрын
Well done - no nonsense, Id rather hit rewind or pause once than guess where to fast forward to and miss something!! Thumbs up!
@NoNonsenseKnowHow5 жыл бұрын
Exactly! Thanks for your comment. I started making content because I got sick of sifting through people's long drawn-out videos. I do get a lot of comments about the fact that I have to slow things down though. lol
@ericlunneborg907 Жыл бұрын
I just ordered a GMB kit with Mitsuboshi belts. Not looking forward to it, but your video looks to be of great help. After watching it three times I'm confident I can move forward. I replaced a belt on a 2.3 Ford many years ago and it wasn't near as involved as this. I'm off all week from work so I am going to take my time. I'll update you when I finish. Merry Christmas!
@arthurhudgens8213 Жыл бұрын
Those are good little engines..my 04 santa fe has 300.000 miles on it still runs fine and no oil burning..I bought it new and changed the oil every 3000 miles.ive changed out timeing belts bearings and water pump several times lol.its amazing how fast you can do it after you've done it a time or 2..they are reliable the only things that have left me stranded a time or 2 is the crank angle sensor or a coil pack. Very good engines I wish my 2020 santa fe had this type engine 8nstead of the new gdi engine..
@sarahsmith4617 Жыл бұрын
This video is awesome, straight and to the point. Thanks for sharing.
@narwhaljones48212 жыл бұрын
Like others already, dude. This video was great. I have watched this atleast 7 times and paused it along the way multiple times. I'm pretty mechanically inclined already, but this video really helped give me the confidence to rock this job out effortlessly on the timing aspect. The paper towel trick worked like a charm as my Honda cam lock tool was a little to wide. Thanks again bud. I genuinely appreciate you taking the time to make this.
@DanielWagenheim5 жыл бұрын
Great video!! Helped me realize I need to hire someone to do this job!! Truely a gift to do what you do
@bnorwine2 жыл бұрын
Awesome video. I like this style!!! Almost like a 'talking repair manual' !!! Would be a perfect video if there were some comments on how to do this when belt breaks... especially the 'gravity' method of getting the oil pulley lined up correctly.
@ajaylomba6109 Жыл бұрын
Straight to the point without all the extra bla bla bla.. thumbs up. Helped me alot and quick.
@scotthellmer35095 жыл бұрын
The instructions to take everything apart were great. I struggled getting the timing belt back on. There is a video on a Mitsubishi engine that is very similar to this one that was helpful. Key tips for me were: 1. I used 2 wrenches on the dual cam bolts with bungee cords to hold them at the right spot. 2. When you wrap the new timing belt around, you need to end up at the tensioner by the water pump last. You will have to tightly wrap the belt between the two lower sprockets to have a chance. 3. Use spring clamps to hold the belts on at the top sprocket and bottom one 4. When you put the lower cover back on, use some gasket shellac to keep the thing from coming out as you slide it into place.
@rwewew2 жыл бұрын
Excellent video. The speed sensor wire was cut by the timing belt because of wrong reinstallation, on my wife's sonata. Your video was very concise and helpful - thanks!
@tonywastler5944 Жыл бұрын
Wow Ive been watching your videos, and had no idea that this was you doing a tutorial. I thew a balancing belt witch caused the timing belt to slip. 05 Kia Optima so needed help with power steering pump removal. Then there you were here to help. Interference motor bent valves, dinged pistons. I bought a new head from Allied motor parts. On my way back together, and I got stuck. So impresive, thanks man!
@GaryNelson-qs9he3 ай бұрын
This was a big help, thank you
@jsmid85597 ай бұрын
Awesome video brother you saved me so much money!
@brighammmer9 ай бұрын
Paper towels. Brilliant.
@jameskenyon4522Ай бұрын
Very Nice!! Straight forward and easy to understand.
@amybaker8373 Жыл бұрын
It's the only video and I can find that matched my job and I know that I washed it several times and saved it to my playlist cuz it's the only one that could help me
@MrRChitty2 жыл бұрын
Finished the job, your video was spot on and very helpful. Back in the day it would have been a Chilton or Haynes manual.
@williamroberts8006 Жыл бұрын
This was nice to look at. I just put a radiator, thermostat and housing. Then I replace both timing belts and water pump with this 2005 Hyundai sonata 2.4. Thanks for the tips.
@jackdedert29456 жыл бұрын
Easy enough...not. The video is very good. Thank you. I once did a 2.4 liter Ford on the side of the road without even pulling the crank pulley (didn't have that particular wrench on hand). You showed enough detail that I don't think I want to tackle this in even my driveway. That leaves 'borrowing' a garage somewhere or having it done. Not my usual style, but I guess I'm getting old.
@scitzz Жыл бұрын
Excellent! I didn't have to skip thru a ton of nonsense! I run an independent shop and if I haven't done the job in a while, I'll see if someone has thought of s shortcut that works too save time, make sure I've got the specialty tools on hand bla bla blah. I like the clear cut video touching on the operations without showing every single minute of it
@balrajsingh-zp4wq5 жыл бұрын
Thank you so much for this video bro my hyundai sonata this car starting problem day time morning time good start but in day time not start very long self after then start
@NoNonsenseKnowHow5 жыл бұрын
No problem! Glad it helped out
@daniellira41564 жыл бұрын
Awesome video....got straight to the point!!! Need more videos like this for people looking for help, not learning the basics of lifting a vehicle. Hahaha
@NoNonsenseKnowHow4 жыл бұрын
Thanks for your comment. Yeah my videos are mainly geared toward people with prior experience. Occasionally I get hater comments saying I wasn't thorough enough though. LOL.
@JJ-nh8lv5 жыл бұрын
I recommend that you replace the crank sensor while you go all that loose. You have to do all this to change that sensor!
@NoNonsenseKnowHow5 жыл бұрын
I definitely agree that's not a bad idea at all. Thanks for the input!
@zedeadfrank35104 жыл бұрын
Hey that's what I'm doing!!
@MT-gm2zh5 жыл бұрын
Good video sir I remember doing this job years back when I was an apprentice good times
@PatrickKirby-gw2zk11 ай бұрын
Great video. You explained it with great detail. Make more like this..
@dhestondh4 жыл бұрын
Right to the point no extra bull good stuff
@brucefogarty70522 жыл бұрын
really good description and not stuffing around - thanks
@looptyraptor3240Ай бұрын
Well god bless you 🤣 cracked me up
@corypalmerini16106 жыл бұрын
Great to the point. Ty if you have auto repair past experience this perfect way to show it.
@thatguy_jose6 ай бұрын
Hey Chris. Soon as I let of tension from the belt..it made a little clank..not sure if it went out of time...hope you see this man. I'd hate to start it and hear the piston slap the valve..
@alexrobertson151110 ай бұрын
I would love this video if he showed a little bit of putting it back together. I’ve run into an issue on mine that I just got called “elementary” for
@esmnation86053 жыл бұрын
Hey thanks man. I spent an hour trying to figure out how this tensioner worked
@NoNonsenseKnowHow3 жыл бұрын
No problem! Hopefully the video helped out a little bit
@esmnation86053 жыл бұрын
@@NoNonsenseKnowHow oh it helped out a whole hell of alot
@NoNonsenseKnowHow3 жыл бұрын
@@esmnation8605 sweet
@marionrhatigan87063 жыл бұрын
In the video you said there was an hour version. Could you put a link on that. Trying to replace the other belt Camshaft balancer belt. I think that’s the one I have to replace the timing belt stay together but that boat is all torn up in pieces thanks in advance
@NoNonsenseKnowHow3 жыл бұрын
When I was originally making this video I did a quick search and saw a few other videos that were a lot longer. That's all I was referring to. If you didn't find it in your search it may not exist anymore. If it is on there it should pop up when you search Kia 2.4 liter timing belt replacement
@MrQuantom Жыл бұрын
I thought the 2.4 was a Timing Chain ⛓️?.?
@samanthafidler95073 күн бұрын
@@MrQuantom nope belt
@debbieparker34863 жыл бұрын
Thank you it helped us out alot
@EliHernandezy8083 жыл бұрын
I recently had this work done on a Kia Optima 04 2.4L @ a Kia dealership. Believe or not, the tech forgot a component or something, cranked the engine and destroyed the valves. So they end up replacing the head with a reman head, redo the job with the timing kit and I just recently picked up. No issues now except for a weird idling when at a red light or stop. Like if it’s going to eventually stall, but doesn’t. On the highway and roads, it handles great and makes power. What would cause this?
@NoNonsenseKnowHow3 жыл бұрын
Damn, sorry to hear that. It's possible the timing could be off one tooth. But I would think they would have made sure everything is proper and right The second time around. Could be lots of other things too though.
@EliHernandezy8083 жыл бұрын
@@NoNonsenseKnowHow Yeah I know. It’s been a headache. I’ll keep monitoring it and seeing if any changes happen. Driven 100 miles so far 😅 Anyway, great video btw. Clear and concise explanations.
@omar27834 Жыл бұрын
I have a question about this. A “mechanic” changed out on one of my customer’s vehicle. Well he got everything back together and the engine won’t even turn over like it’s locked up I’ve looked at everything timing and etc intake cam was way off of timjng so I fixed that and it still won’t even budge ran perfectly fine before. Did notice a small bend in the oil pan where he just used a jack and no wood
@johncoady9237 Жыл бұрын
Hi great video,,,can I ask I'm going to tackle mine myself,,are the two tensioners on the timing belt just bolted back on or do I have to tesion them first or do they just bolt back on and as soon as I remove the pin then everything is tight,,,thanks
@matthewglaze5398 Жыл бұрын
This is exactly what I look for in a how-to video.
@traigreen6153Ай бұрын
Having an issue with getting our timing marks to line up on cam gears, oil pump sprocket, and crankshaft. Any tips? We got it line up before with the new belt. Turned the crank 8 full rotations and can’t get the marks to come back around
@jtrentful5 жыл бұрын
When taking crank pull off first take 4 bolts out then outer piece of crank comes off without pulling timing gear off then remove the 22 mm crank bolt that's how it's supposed to be done it's the only part of your video I would change.
@NoNonsenseKnowHow5 жыл бұрын
Cool, thanks for the tip
@josephpezza30624 жыл бұрын
And also the belt wasn't broken I had to replace crankshaft position sensor
@onlywenilaugh65894 жыл бұрын
Yep, anytime the timing belt is changes on these, the position sensor should be as well. I'm not sure if it's the cleaning that makes them go bad but seems like a few months after belts are changed, the sensor goes out and you have to do it all over again.
@JoseGonzalez-dv6yi4 жыл бұрын
In the prices but I might if fucked up the timing but this helped ima try it! Thanks man💪🏽
@NoNonsenseKnowHow4 жыл бұрын
No problem Jose. Good luck on the job!
@JoseGonzalez-dv6yi4 жыл бұрын
Yo man I replaced the belt but now my car won’t start any tips
@JoseGonzalez-dv6yi4 жыл бұрын
Sluggish crank and at one point it sounded like there was resistance
@NoNonsenseKnowHow4 жыл бұрын
If it ran fine before, then the belt is either not time properly or you may have forgot to plug something in like a sensor or the ignition coils Etc. Need to go back and Trace all steps. Check for spark, and check your cam timing
@NoNonsenseKnowHow4 жыл бұрын
@@JoseGonzalez-dv6yi that doesn't sound good. Sounds like maybe it was improperly timed and the valves could have contacted the Pistons. Honestly it's hard to give you any advice without seeing the vehicle
@tajhealthnature85705 жыл бұрын
Good 🎥 big job...
@johncoady9237 Жыл бұрын
And my crank sensor is intermittent faulty so ill replace that also do i have to remove the power steering pump to do do
@iamemanbwa1292 Жыл бұрын
To change the crankshaft sensor do I need to take the belt off to slip the sensor pass it?
@bassjunkie64043 жыл бұрын
Do I have to removed timing belt just to work on water pump??
@crunchytacosupreme9371 Жыл бұрын
I have a 2005 sonata 2.4. Yesterday my car lost power it sounds like it doesn't have compression. Today i took off the timing cover and the timing belt is really loose almost off. Is the engine still good?
@ronsmithee77415 ай бұрын
2000 kia optima wheel on crank needs removed to replace belt behind i, how do i get that wheel / sprocket off ???
@MrRChitty2 жыл бұрын
thank you
@jerryhoratio9935 жыл бұрын
good night sir congrat how yu explain timing marks but ich have one more question about hyundai Sonata dumping alot of Gas Not starting what is the causes
@NoNonsenseKnowHow5 жыл бұрын
Thank you for your comment, to be honest with you that's something that I would have to take a look at it in person. I work on all makes and models and they all have their quirks. Have you tried doing a Google search on your issue?
@roibrycker88972 жыл бұрын
Good video ! Thanks for the content!!!!
@twistthrottleatv35045 жыл бұрын
Thank you
@luispena73952 жыл бұрын
Hi, thanks for your help, but I have a question? Where I put the screewdriver that specify the manual?, Sorry for my English!
@tajhealthnature85705 жыл бұрын
Is this the same as a 2004 kia optima.. 2.4..
@NoNonsenseKnowHow5 жыл бұрын
It should be, but I'm not a hundred percent sure
@tajhealthnature85705 жыл бұрын
@@NoNonsenseKnowHow i try to do yhe same job.but my...crankshaft..not turning over any help please
@tajhealthnature85705 жыл бұрын
@@NoNonsenseKnowHow also my cam is a dual cam..as same as yours..those two..holes..is it supose to be at 12clock..
@NoNonsenseKnowHow5 жыл бұрын
Did the Belt break? The only two reasons for the crankshaft not turning over is a siezed engine or a piston is contacting valves
@gandhilegion3 жыл бұрын
It's a simple thing but i cant seem to fit the timing belt cover back on and it's 100% in tact. The bottom right of it i could push some plastic and that side fits but the bottom left side isn't fitting back into place. Took some force to remove, might take a bit to get back in.
@NoNonsenseKnowHow3 жыл бұрын
Sometimes they swell from the oil and heat
@gandhilegion3 жыл бұрын
@@NoNonsenseKnowHow just got er back on, had to maneuver it with a bit of rotation rather than force. Thanks for the fast response and the video. Good stuff
@NoNonsenseKnowHow3 жыл бұрын
No problem. Glad to hear you got it!
@colestaples20102 жыл бұрын
Have you replaced the seals behind the timing cover. It looks like I need to pull the oil pan to get the other cover off. I’m assuming I need to put the motor mount back on to pull everything off
@Demingcowboy4 ай бұрын
~ only missed: How the hell does the lower cover come out? Top or Bottom, I am stuck in an odd point.
@SmichaelLIFE4 жыл бұрын
THANKS!...Iḿ not doing mine, but I have a Clear Idea about what this is worth. 🍻 💰💰💰👓
@NoNonsenseKnowHow4 жыл бұрын
No problem man, yeah you usually get your money's worth on a job like this
@MERF7352 жыл бұрын
how can i put a hyundai sonata car in focus nn machine can start.stp give me an answer i am stuck
@cademmo Жыл бұрын
Do you have to remove the timing belt just to change the water pump
@juanguzman14112 жыл бұрын
i got a problem . I turned the crankshaft clockwise accidentally while having the camshafts locked in the guided positions is there a way i can turn it back counter clockwise without unlocking or do i have to do a whole turn all over again please advise me
@elisacarter40764 жыл бұрын
About how long does this take from start to finish? I was told by an experienced mechanic that it would take about 6 and a half hours.
@NoNonsenseKnowHow4 жыл бұрын
I don't remember what the exact time was on it. But definite not 6 hours. like 4ish id say
@bigdrevil15 жыл бұрын
can you share a link for 2001 hyundai santa fe 2.4l torque specs you show.
@NoNonsenseKnowHow5 жыл бұрын
Sorry Keith it was a while since I've done this video. If you find the specs, and comment them back I will plug them into the description of this video for future viewers. Thank you! And sorry I wasn't up more help
@jarredgrimmett60714 жыл бұрын
Thanks for the video. But piece of advice to everyone else...this job is well work paying someone 400$ to do. Or you need to invest in some really long ratchet wrenches
@SamSam-us2fh5 жыл бұрын
Hi I just changed the timing belt but engine shaking? 😒
@vapeking4665 жыл бұрын
Look up how to not fail hyundai timing belt on youtube for the fix
@BillyRillkratz4 жыл бұрын
Great, thanks!
@joonajks4 жыл бұрын
In your opinion is this a very good reliable automobile for heavy driving?
@NoNonsenseKnowHow4 жыл бұрын
Honestly I'm not a huge fan of these. I mean I've seen plenty of them with 150k miles and more. But they're usually pretty run down and whooped by then. Much better off sticking to a Honda or Toyota if your budget will allow . worth the extra couple dollars
@joonajks4 жыл бұрын
NoNonsenseKnowHow Thank you very much I really do appreciate your input!!
@NoNonsenseKnowHow4 жыл бұрын
@@joonajks no problem at all. Thanks for checking out the video
@kustu3 жыл бұрын
@@NoNonsenseKnowHow At least my 06 Kia Sorento which has this same 2.4L engine, runs like new and it has 155 000 miles on clock. In Finland where I live, many of these Sorento's have over 300 000 miles on them so they should be quite reliable.
@tommymoore94433 жыл бұрын
@@NoNonsenseKnowHow 2004 Hyundai Sonata 2.4L 225k miles, other than routine maintenance, I only had to change the alternator, some sensors and the timing belt awhile back (which I had professionally done) and now have to change the water pump (myself) because the fan sensor went out and caused the pump to overheat and pop, still runs though, just overheats... obviously.
@johnnyrocha97904 жыл бұрын
Can you use a timing gun to set time on a Santa fA 2006
@NoNonsenseKnowHow4 жыл бұрын
no
@vapeking4665 жыл бұрын
I was running about 55mph when mine slipped belt is missing teeth. Car just shut off and would not start. 2004 hyundai sonata 2.4l You think engine is shot?
@NoNonsenseKnowHow5 жыл бұрын
Only one way to find out. Pull it apart and throw belt on. Halfway put it together and fire it up
@XxColts74xX5 жыл бұрын
Do not try and start it up immediately. Make sure your valves aren't bent, or take it to a machine shop to examine your head if you can't. Then throw it together and make sure it has oil in it :P
@mosiwilliams11492 жыл бұрын
Well done
@ouikikazz4 жыл бұрын
How is this different from the 07 motor?
@NoNonsenseKnowHow4 жыл бұрын
I'm not sure, is it different? If you find it's not, let me know and I will update the title. When I posted the video, that's probably just what I came up with based on my short research
@xray3644 жыл бұрын
Why do you rotate the engine manually two times at the end. Is this to make sure everything turns easily and that the pistons don't hit the timing valves?
@NoNonsenseKnowHow4 жыл бұрын
Correct. And then also to re-check your timing marks. But don't worry about the marks on the Belt. Just check that the crank and cans are lined up properly after 2 rotations of the crankshaft
@mecellassmith91066 жыл бұрын
Shops say i need to redo my whole timing belt, if i just need to put tension on it, is that true ?
@NoNonsenseKnowHow6 жыл бұрын
Generally yes. If you're going to put a new tensioner on you might as well replace all the other components while you're in there
@mecellassmith91066 жыл бұрын
Thank you for your reply. I have a new timing belt, water pump, cylinder head, intake valves. Would i still need to replace everything despite new parts ?
@NoNonsenseKnowHow6 жыл бұрын
@@mecellassmith9106 no you can just do the tensioner
@mecellassmith91066 жыл бұрын
Ok,thank you
@bassjunkie64043 жыл бұрын
If I need to replace just the water pump, can I get to it with out touching any of the timing belts?
@MERF7352 жыл бұрын
comment puis-je mettre une voiture hyundai sonata au point nn machine peut démarrer.stp donnez-moi une réponse je suis coincé
@jenniferdeclerck85586 жыл бұрын
Does it matter if my timing marks line up but the oil pump gear is 180 out when u spin the motor over by hand
@NoNonsenseKnowHow6 жыл бұрын
Honestly I would have to look back at the video. I haven't done one of these in a little bit. But no that sounds normal off hand
@josephpezza30624 жыл бұрын
Hello I have a question I recently changed my timing belt on my 04 kia optima 2.4l and I was confused about how the crankshaft is timed I believe I didn't line up the dust shield to the timing mark but also if the two front sprockets at line up will the crankshaft be lined up to the lower timing cover as well ? Sry ik this is an old video I just need advice bc I did this and my car isn't starting I'm sure I didn't break any valves the engine just cranks and dosent start any feed back would be very much appreciated thanks
@NoNonsenseKnowHow4 жыл бұрын
I'm having trouble picturing exactly what you're saying and it's been a while since I did one of these however as long as you line them up as seen in the video and also as seen in the instructions that should have came with the timing kit then you should be good. It sounds like you might be off a couple teeth. If it's not starting and you've checked all your other connections, then the timing must be off. Hopefully no damage occurred
@josephpezza30624 жыл бұрын
Hmm I see bc I lined up the cams with the old belt since it was still intact I just turn the ignition little by little till it lined up top dead center with the marks however one can was lined up and one was slightly off like maybe 2-3mm and what I'm trying to say is basically if u line up the top cams while the belt is on would the crankshaft pulley dampner line up with the lower timing cover mark or do u have to rotate the engine manually
@NoNonsenseKnowHow4 жыл бұрын
@@josephpezza3062 yes always rotate it manually. Never ever crank the engine especially with the belt off. You should take the upper timing cover off and then get the number 1 piston to top dead center on compression stroke and verify that your cams are properly times. It sounds like the timing must be off
@josephpezza30624 жыл бұрын
@@NoNonsenseKnowHow thank you sir I appreciate it very much sorry to disturb just this is my first time I want to attempt to learn how to do it on my own but I think I'll have to just hire a mechanic who knows what there doing and learn some other time don't want to mess it up even more
@officialchetan265 жыл бұрын
Hi I'm having sonata gold 2004 actually my car key is broken but it's transponder is fine can I start my car with another key..... please tell me sir
@NoNonsenseKnowHow5 жыл бұрын
I'm not sure off hand. Sounds like you would need a new key with the proper transponder
@officialchetan265 жыл бұрын
@@NoNonsenseKnowHow sir transponder chip code is get to change right
@officialchetan265 жыл бұрын
Sir one of my friend told me start the car with sample key and put the transponder near to the lock then your car will start. Is he saying correct
@bassjunkie64043 жыл бұрын
Good god that belt is f Ing hard to put back on solo lol
@amybaker8373 Жыл бұрын
I did it myself first time ever I did how ever mess up on not marking crankshaft unfortunately the importance of it wasn't to emphasized I would have been more apt to if it was it was none of my knowledge how how important with but other than that I didn't complete the job things to this video
@cap7aincool5 жыл бұрын
My timing belt just broke yesterday.. 2003 sonta 180k miles.. mechanic says the broken belt probably "ruined" the engine wouldn't even bother with an estimate another wanted a grand. I've DIY previous projects on my car before like head gasket, plugs, brakes etc.. but based off the complexity of this project I think its probably time to let my sonata go :(
@NoNonsenseKnowHow5 жыл бұрын
I would give it a go. Get yourself just a timing belt, put it on there, and put just enough back together where you can start it. if it starts up and runs, then put a new pump in there along with the other components. What you got to lose? It's not that complex once you get in there, especially arms with this video. Good luck, and let me know how you make out if you take it on! You got this
@NoNonsenseKnowHow5 жыл бұрын
Also just FYI, I rarely see engines get destroyed from a broken timing belt. Even on a interference engine, it's usually only about a 30% chance of bending a valve when the belt breaks
@jayg44085 жыл бұрын
Do you still have this car? I need help
@NoNonsenseKnowHow5 жыл бұрын
Sorry no. This was just a job I was doing
@jayg44085 жыл бұрын
Maybe you can still help? Do you have an email?
@NoNonsenseKnowHow5 жыл бұрын
Sorry I try to keep things to the comment section. What seems to be your issue?
@jayg44085 жыл бұрын
The clip broke for the camshaft senor and I dont know the order the wires go into. From too to bottom I have a brown cable and 2 black
@NoNonsenseKnowHow5 жыл бұрын
@@jayg4408 oh I see. Yeah unfortunately I don't have access to one of these so I wouldn't be able to help you with that. You may be able to find a wiring diagram that shows the terminal pinout online somewhere though
@tibtb6585 жыл бұрын
same as a mitsubishi 2.4
@timothygodfrey49502 жыл бұрын
REPLACE THE CRANK SENSOR WHILE YOUR IN THERE...
@dracojames29754 жыл бұрын
If i could spam the thumbs up i would. Couldnt figure out why it was shaking so bad. I Had the timing off by two teeth
@NoNonsenseKnowHow4 жыл бұрын
Happy to hear you got it corrected
@saschan40573 жыл бұрын
God damn good video. But worst time belt change ever for me. If you did it including water pump (5 bolts, 4 different lengths and the f"Ing alternator attached to it.) you know what F"ing hell means. 7 hours Hyundai what the f! Is wrong with you
@NoNonsenseKnowHow3 жыл бұрын
Thanks for the feedback. And yeah definitely not the easiest of belts. Glad to hear you got it knocked out though
@NoNonsenseKnowHow5 жыл бұрын
On Amazon: *2.4L TIMING KIT: amzn.to/2Y7jFEm *CAM HOLDER: amzn.to/2XXzide *LISLE SPILL FREE FUNNEL KIT: amzn.to/32yr6nd *MECHANICS TOOL SET: amzn.to/2NctGIC *PERMATEX THE RIGHT STUFF: amzn.to/2XXsJLY