Hyundai sonata 2016 code P001000 engine light on. the fix

Hyundai sonata engine light code P001000. first thing to check.

[@NeurinRo]

Good job!

[@lrncephil80]

Great video

[@THEREBBEL84]

Hello there. What are the part numbers for each parts? Thanks

[@michellecastro6650]

Can this cause to not drive like the dead battery flash on your dashboard or is it another thing

[@marinacamargo2101]

Great video, thanks a lot Are you planning on recording how to replace the alternador on the 2015-17 Sonatas?

[@hyundaihowto]

If i get one that needs it i can.

[@therealmarkkyt]

@@hyundaihowto this was the alternador or actuator that you replaced ?

[@hyundaihowto]

It's a CVVT sensor and cover

[@Shawn-ee6yh]

Amazing video, what would you recommend doing if the check engine light comes on for the same issue but goes off? Sensor was replaced with a universal sensor could that be the issue?

[@hyundaihowto]

All the oil may not have been cleaned out or its leaking in it again.

[@russellschake9288]

I'm wondering if that's what's Going on with mine, edmin replaced the cover Two days later, the check engine light came on with the same code 0010, I have a month to wait before the dealer. Look at my car, what should I do if you can help Point me to what I should do next if you can thank you

[@guillermoruiz2487]

so i followed all the correct procedures as per the TSB, and replaced sensor/cover and motor plug that you did at @5:38. code and CEL keeps coming back on after driving 10-20 miles, ill clear it and eventually comes on again same day. maybe VVT motor is bad?

[@wisamthedream3263]

Same thing here, did you ever figure out the issue?!

[@ohsothick21]

Hello. How much would this cost to get done?

[@warrenhill4409]

Don't see how that fixed the oil leak into the housing. The seal on the inside of the housing keeps oil from

[@mcmma9209]

What sensor is that by where you take that rubber cap off?

[@hyundaihowto]

The E-CVVT cover. Sensor is part of it.

[@Pt702fx]

I was told you need a special tool to replace this part I have a 2017 Kia Sportage 2.4 liter I have replaced once already 1 year ago ? Thank you in advance

[@hyundaihowto]

No special tools

[@johnweaver3977]

Yes you do. Here it is. 09243-C2000 Cam Plug Installer Tool. The guy in the video put the cam plug in backwards and didn’t set it to the correct depth. It’s gonna leak oil into the cover again.

[@honeyesko8470]

​@@johnweaver3977yup. 19mm depth to be exact is where it needs to be using the cam plug installer tool. If you cant get one you can use a deep 1/2 inch socket and mark ot to 19mm

[@stevenwatson2699]

is this covered under recall if the vehicle only has 76000 miles?

[@hyundaihowto]

If its a recall it would be covered, but under warranty i believe the car is to old.

[@juanrodriguez-xy5dy]

Please I need help, a question this code appears in my 2016 Hyundai sonata I changed that part and it was only good for a week ,and same problem back, high rpm, what else could it be since that part is clean. Please help..

[@hyundaihowto]

Was all the oil cleaned out and dry before putting new part in?

[@juanrodriguez-xy5dy]

@@hyundaihowto I don't sure.my mechanic doing this, now it says that maybe need to remove the timing chain some parts inside that may have oil. What do you recommend? Just clean before putting the cover on, or it would be fine to remove parts of the timing chain.?

[@williamgildea8348]

What if you replace this and the same fault comes back

[@cuzzie76]

What year hyundai is that

[@hyundaihowto]

2016

[@AlienThumbs]

Doesn’t anyone know about Hyundai sonata 2016 ? My car is going but it’s not going as fast when I accelerate it’s actually going at a certain speed it doesn’t go faster I already replaced the cover in this video and it was good for a few days then the light came back on and it started going slow again like it’s forcing itself? Doesn’t anyone have any idea ?? I need help no one knows what it is ??

[@hyundaihowto]

Is there oil in the cvvt? May not have been cleaned out all the way or has a bad seal.

[@russellschake9288]

Going through the same issue replaced the cover replaced the Cvvt The light came back on after I had it replaced losing power. But when I stop at a red light. I have my foot on the brake they're car feels like it wants to go I have to hold the brake down Hard to keep it From Wanting to surge forward. And I'm getting gas in my oil. I had the oil change 4 times only drove the car a 1000 miles, Don't know what to do because all the dealers around me Are telling me they're backed up like a month Wait To even look at the car. Add the card at the dealer already. Sat there for a month, they did a low bearing test. They said everything was good. At the engine cleaned 3 times. Bought the car a couple months ago 2016 Hyundai sonata sport 2.4 l. With a 110000 miles on it. For 13000. Ever since I had the car, it's been sitting in front of my house or in the shop and no one can figure it out I've been doing a lot of research online. Never been so stressful in my life dealing with this car., Crazy thing is. This is the first car payment I ever had in my life. And this is the worst car I ever had.

[@SL-pg4dh]

@@russellschake9288 Thats crazy. Have you managed to fix it? i have the same car, same issue. Please let me know if you fixed it and what the issue was, I've tried everything, nothing has worked for me

[@Itsmelavonde]

I'm sorry that you're going through car issues, I too am having issues with my hyundai that I'm making payments on... I'm going to take it to the hyundai dealer. It's expensive but gotta do something. Good luck!

[@russellschake9288]

Firestone suspended mine have a 2016 Hyundai sonata sport 2.4 l., They changed the sensor cover. In my check engine like keeps coming on. With the same code. At the same time, I'm getting gas in my oil. They showed me the old cover and it had oil in it. Had spark plugs change too. Bought the car 2 months ago and been having problems with it ever since. Because I can't find A good mechanic. ,And the dealership's always saying it's a month. Wait, even look at my car. I don't know what to do next. I just can't keep throwing money at this car. When I have extended warranty,

[@zainzwerschke5484]

Did you replace the plug with the cover?

[@SL-pg4dh]

Did you ever get it done? I'm having the same issue, nothing has worked.

[@lrncephil80]

Two questions for you. 1. What failed on thae cover causing the oil to leak? 2. How has the engine replacements on the 2.0L and 2.4L been going lately? Is it dying down, ramping up, or staying the same?

[@hyundaihowto]

The gasket in the cover failed. We still have a back log of engines. We cut appointments down to almost none to get caught up on them.

[@lrncephil80]

@@hyundaihowto thanks for the response, l appreciate it.

[@davesmyth4327]

thank you@@hyundaihowto

[@mp4338]

Bingo, but the pictures go to fast. why you do'nt change the sensor? The kit is expensive and the aluminium is more ok.

[@gwomp61]

If you see oil inside the cover it's because it's getting past the center plug and replacing it is the most important step for this repair. I don't see anything in this vid showing the removal of it or the very important step of removing/replacing a new one the "right" way. For tapping it in to the correct depth, Hyundai has a special tool but it can be done with a deep socket (1/2") and some tape on it to mark the right depth. Sorry, this vid is missing some important steps.

[@gwomp61]

static.nhtsa.gov/odi/tsbs/2017/MC-10109850-9999.pdf (KIA but same process)

[@KillaKliff101]

You know the depth specs by chance?

[@gwomp61]

1/2" socket and 19 mm depth. Mark it with tape and a little tippy tap on the plug with the socket when the cover is on.