I Bought a $3,000 FOUR WHEELER from Facebook Marketplace for the NEW Property!! (BROKEN ALREADY?!)

Today we're shopping for a used 4-wheeler on Facebook Marketplace
--Support my videos by grabbing some Googan Squad gear here: bit.ly/38XVifQ
(GET 10% OFF YOUR PURCHASE with code LOJO)
--Subscribe to My Channel: ‪@lojofishing‬
--Check out the new podcast channel: bit.ly/3n75KtR
--Find me on Social Media Below--
Instagram: goo.gl/pXDu2G
Twitter: goo.gl/uykfmT
Facebook: goo.gl/jSMyGg
#facebookmarketplace #atv

[@lojofishing]

5,000 LIKES on this vid and I’ll buy the CRAZIEST vehicle I can find!!

[@albertoknot8886]

I'm 100% sure we'll get the 5K..team lojo all day

[@jamesratliff9760]

Team lojo all day every day let's go to 5000

[@imari.m5039]

u should try fishing with plastic caster challenge

[@genarohernandez1425]

Giveaway

[@joshuaclaygaines]

I bought the same atv from the scrap yard for $40. Rebuilt the carb and new battery, had it for 5 years now and runs fine. I sell it to you for $3k lol

[@lonnylance6184]

Should have brought someone that knew about 4 wheelers with you!!! That is a pos worth about 500 dollars!! Atleast where I'm from. You can get a used 2010 or up Honda foreman 4x4 for that price, that has nothing wrong with it.

[@calebbarber2932]

Yeah bro he got the stick

[@lojofishing]

I’m a newb

[@lonnylance6184]

@@lojofishing We know, not trying to make you feel bad. When your knew at a purchase, ask for an experienced person to help.

[@wyatthickman5508]

It id like that were i live

[@fullonfishkeeper8473]

I know right, I was so frustrated watching this video I wouldn’t even buy it for $100

[@Thefvckncaptain]

Let me know the next time you’re buying $600-800 quads for $3k… you got absolutely taken on that deal

[@dkinfishing]

Man thought it was just me. Can’t believe he paid that much for that

[@jamesps7515]

Yea man I wouldn’t have paid a grand for this pos.

[@ezrabailey7026]

No vaseline for that purchase. Bad starter, some kind of ticking lol now a fuel problem.

[@lojofishing]

😂 good to know

[@Hogbellylife]

Same thing I was thinking.

[@derekvetter5301]

The jets are clogged from sitting with old fuel in the fuel bowl. One way to see if it's a fueling issue is if you have a manual choke. You can choke it out and if she runs better with choke on then the carb needs a cleaning. I normally use compressed air and welding tip files. I live in Wisconsin and it's almost routine maintenance when they aren't stored properly.

[@upstatemoviecreations]

oh man for 3k$.... you got screwed over

[@dougieriggs7322]

Yeah thats a piece lol

[@Thebassking83]

Most definitely $1,500 tops needs a starter,cv axle,breaks and tune up probably more!!

[@leroyjankins3944]

Pile anybody should be able to tell its not worth 2500 bucks lmaoo

[@dylanbissonette7258]

I saw 3 k and was like 🤦‍♂️

[@KVGFishing]

Seems like it could be a carburetor issue and it might need cleaning (its bogging because it isn't getting enough fuel). Love the videos Lojo keep up the good work!

[@jakejonesy9275]

Or not the right gear

[@ezrabailey7026]

Yea I don’t work on 4 wheelers but yea carburetor or some kinda of throttle boat issue.

[@burmese434]

Do a tune up and carb clean.

[@lojofishing]

I’ll check it out

[@RIP_LIPPIN]

Make sure the right jet sizes are in there as well

[@aidencameron1701]

If it’s like a dirt-bike the “hand brake” is a clutch that you pull in every time you shift and when you take off, slowly let off the clutch and give it gas. There should be a brake down by your foot.(I’m not sure which one)

[@TheBeaverSqueezer69]

Three grand huh? I got some ocean front property in Arizona for sale Lojo 😂😂😂 lol

[@weatherwatchTX]

LMAO

[@albertoknot8886]

Man can't wait to see this man..lojo is a man all trades..one lov brother

[@trentaucion882]

The axel clicking is an easy fix. It’s just out of grease but a new axel is around 120$

[@lojofishing]

Good news!!

[@bassinwithpassion3667]

Uhh, I beg to differ guys. I suggest you get rid of the wasted ujoint and replace with new. Should get rid of the noise. Great vid as usual guys. Andrew 2, I’m warming up to ya. You’re falling into your own. Good job. Have a great weekend guys. Happy Easter.

[@massbassattack4510]

@@bassinwithpassion3667 i agree, like i just posted to lojo, i worked in the tracker facility and its always best to just replace than play with the old one and gamble on the old one holding out a bit longer lol

[@VibN117]

Cv joints greased and new axel and a little comestic, i think it'll go 5-6 more years, as well as spark plus and so on, but i think he needs to do it now before riding it hahaha

[@dabNtx]

congrats on the property lojo a lil tip, always take whatever your buying on a test drive/ride before you buy... most of these issues wouldve been noticed while one the test ride

[@lojofishing]

Good call

[@christophermx2899]

You can fix the breaks by bleeding them then they will work like brand new. If u clean the carb it should run better, and the air filter needs to probably be cleaned. The clicking is just the axel if you get a new axel it should not tick any more. I would change the oil and oil filter too. Also would drain all the fuel and put fresh fuel in.

[@TztokkJad]

List of To-Do’s: 1: New CV joints(I say joints, because when one goes out, the other is usually soon to follow) 2: New starter 3: Clean/Rebuild the Carb 4: change spark plugs 5: Change/Add Fuel Filter 6: Oil Change(no telling when the last one was and always wanna be safe) 7: change differential oil to be safe as well. 8: new fuel lines(fairly cheap and easy to do) The above list is just a compilation of things that need done and things that will give you safety of mind going forward.

[@FranklinHicks-qs4gs]

^^^100%^^^^^ well said

[@AfflictorTV]

Also add brake fluid to the reservoir above the handbrake, then bleed the air out of the line. You can watch a video on how to do this.

[@turnquistpe]

Completely agree with this. All simple fixes and just regular maintenance

[@wvdeerslayer]

The artic cats are notorious for busting cv joints on the axles I've put a few in mine

[@BossPrepping]

clicking is the CV axle. bogging down could be fuel issue or air or spark. always do a compression check when buying older vehicles

[@joshwagner8468]

Another awesome video Lojo. Loving the property vids. By the way Nice ATV... I hope you get it running in tip top shape.... Keep them coming

[@ronaldyeater3322]

Sup lojo. Love the variety! Artic cats are big in New England. Get it a tune up and have them check it out! Do you still have your excavator? Should drive it along trails, and pick up laydowns ECT. Can dredge creek as much as can too. Keep it up. Start making some money off of property, start with a campground.... Ty tc

[@elmostinger6958]

I love the new property vids Loki keep it up

[@juanarappagis4192]

Just always make sure your in the right gear lojo you will get the hang of it when you get it fixed 👍keep the awesome content going!!

[@willmacklin3058]

LoJo. You need the carb cleaned. Tear it down, soak it in carb cleaner. Use a small soft nylon brush, air compressor to blow all parts out, assemble after checking for worn or cracked parts. Change the fuel filter and it might be a good thing to clean the tank too. In regards to the axle. Get a new axle and slap it in. A couple hours with normal garage tools. While you're at it, might as well slap some new brake pads on her too.

[@jdmiller6568]

This is gonna be a good one!!

[@austinballew3423]

I’m sure I’m not the first person to say it, but with it being 20 years old, it may need a carb rebuild or clean. I’d suggest getting it tuned and the carb at least cleaned if not rebuilt. Also love your vids man!!

[@alexmikhael5061]

yes, even if it starts every time from now till eternity, you don't want the bad gasket in the carb (that a rebuild would replace) GO BAD ON THE OTHER SIDE OF THE PROPERTY down in the hole where the CELL SIGNAL GOES AWAY!!! :)

[@mattd7722]

We just finished working on my dads 2003 artic cat 400. We had the carb rebuilt, battery replaced, new starter, and replaced the fly wheel. The issue we were having was when you 'did' get it started, you would give it throttle and it struggled to go. After rebuilding the carb the issue continued. We then took a second spark plug and pluged it in the coil and clipped a wire to that plug then clipped the other end to the spark plug on the engine its self and started it and watched the the spark. The spark wasnt consistent so it took us to the stater and fly wheel. Those year models the magnets were glued to the fly wheel and the glue wore off and the magnets were sliding causeing the miss fire. The stater was in good condition so we just replaced the flywheel (got from ebay). Its a decent job to do so cover all easy bases before opening up the engine. Hope this helps you, we been having it since it left the show room floor they are good atvs with their Suzuki engines.

[@KaurangaIkaKaitiaki]

As a few people might of already mentioned but I'll give my 2cents...from my limited experience with motors like that the issue with when you give it throttle sounds like a carburetor issue, easy enough to take it apart and clean her up something you can do ya self.. and the ticking from the back right is definitely a CV joint if it's ticking in a straight line it's pretty far gone and I'd start to imagine the left side will be close behind it. Seems pricey for what ya got but I love seeing you learn the hard way! Keep it up lojo loving this new lease on life this new property has given ya.

[@ethan24knights30]

It’s not a little pricy lol it’s only worth 5-800

[@fbi1069]

Love ya lojo but 3k was way too much for this

[@lojofishing]

Good to know

[@hhprogressiveconstruction1140]

Before the last two years yes but equipment prices are high across the board .

[@jackattack7782]

@@hhprogressiveconstruction1140 still ain’t worth 3k

[@biggmidwest4349]

As soon as dude needed to tap the starter I would've been out. Or hit him with a low ball offer. You got shnookered. Andrew2 knew it but didn't say it lol. It don't hurt you though. That thing is bad a$$ I thought I even seen it had a hitch. It can tow too. I don't watch TV, just KZbin really. And I always look forward to you and @AyoFishing's videos. Y'all are like me and my brother's and its just so dope to watch. Much love,I hope the beginning wasn't too harsh sounding

[@TazSJ86]

Yep! And owner wasn't there to haggle with.

[@jakebasco446]

Probably part of the strategy

[@VicARRazorback]

Putting a ball on that will very useful. While you have them at the shop. Put a winch on at least one of them. You be thankful you have one. Also get a tow chain with hooks on both ends. Good to put around trees or the other ride when one gets stuck. With that wet swampy stuff you don't want get stuck. I won't owe a ATV/UTV without a winch. I've had to rescue someone one too many times.

[@thickgirlsneedlove2190]

Ohh well I would've still bought it smh

[@OriginalElusiveE]

For the rear end you need to check the CV axle by pulling it back and forth. If the axle makes a clicking noise by hand you will need to replace it. If not the differential is shot... but Yikes, should of done a pre-purchase video haha. We're here to help you big dog. Loving the 1mil property content!.

[@JBLEEZFMT]

Few hundo and a few days away at a good shop and you have a great machine that will last. I couldn't touch one like that after repairs for under 5k in oregon. Great tool purchase for the new property. Dont get discouraged!

[@JBLEEZFMT]

Bring On Another Thousand. Boat

[@thetreavorhays4306]

dont turn into ayo 😂😂😂 with a fb addiction 😂😂

[@mattolivo]

Ok we get it, you have $1,000,000 worth of land. Lol sheesh. Makes me feel inadequate and I thought I was doing pretty good with my life. Lmao hahaha just busting your balls... keep up the hard work, love seeing you reap the benefits. You deserve all of it. Tight lines I cant wait for the next one bro.

[@Steven_Carlson]

Yea I feel the same way a tad bit. I really enjoy lojo but it feels a bit braggish everytime he says it. I'm not really hating just think he should call it something else. I don't feel he's doing it intentionally either. I was excited about my big $4,000,000 plot of land so I understand. Wish him the best.

[@computernerd970]

Definitely should do an oil change to give you an idea how happy the motor is. It sounds to me like it's bogging like it's not getting enough gas. So might wanna look at the carb see if you can do some fine tuning. As far as the clicking in the back end goes might wanna just pull the wheel off and see if the hub is decent then work your way in from there. Another thing that would hurts is to pull the valve covers and check the clearance to the valves. My warrior had a wicked tap when I bought it. All it was were the valves were out of adjustment. So lash them valves.

[@justLori530]

STAHP buying off of market place. Thanks for showing the goats made me smile. Peace & Love Happy Easter!

[@girlfinfishing]

Uh oh! Sounds a little shady for that price. Excited to see all the things you do with your property. 😊

[@lojofishing]

Yeah..little shady lol

[@benjaminrippons2321]

3k for an older 4 wheeler that has issues definitely a bit on the high side

[@rickyjones6393]

@@lojofishing probably could have found a Honda around that price and would be a lot better

[@arcuriotv6894]

Bad deal for the age of that bike. You can do better my friend

[@thickgirlsneedlove2190]

@@arcuriotv6894 Wasn't a bad deal

[@BiggWill1992]

Sounds like it’s having a fueling issue. Carb rebuild would be a good idea.

[@jamiev8908]

I have same fourwheeler just automatic. I love it. Does everything I need and is a workhorse. Sounds like it’s not getting much fuel to it either.

[@centexbasser]

Sounds like it has water in the carb, and the cv joint on the rear right axle is out. A good carb clean and new axle and I bet you'd have a pretty good machine

[@jakegrantham509]

Make sure you start off in first gear and replace your spark plugs. That should stop the dying when you give it throttle.

[@allentapp5766]

Spends 3k on Four wheeler that doesn’t start when you get there, has broken axel and supposedly new rear end.. Lojo trouble shooting “I just must be doing something wrong.” 😂

[@lojofishing]

What can I say, I’m a rookie

[@JRC8639]

I have a grizzly 660 which are notorious about axles going out it is an easy fix you can buy a axle rebuild kit on line Farley cheap or just buy a new axle either way doesn't take long to fix it the other is carb issue have someone rebuild the carburetor and adjust it and you will have a perfectly fine fourwheeler. Fourwheelers can be expensive and they can be cheap depending on what YOU want to do with them. Have fun with your purchase and love the content bro.

[@joshmcpoil7444]

That one of the funniest videos I’ve seen you do LOJO. I was lashing so freaking hard!! That was amazing

[@Lane_rancher_420]

He should’ve got a better four wheeler

[@trevortheking5609]

I wonder how expensive the property was? He hasn’t told us yet. I love lojo but come on man

[@dirtysouthfishing3674]

I was just thinking the same thing. I said to myself “I love you Lojo but please stop calling it the million dollar property”

[@Hogbellylife]

👍

[@hhprogressiveconstruction1140]

I believe he said in early video .

[@brucepreston3927]

I know it can get annoying but unfortunetly that clickbait title crap is what gets people to watch videos and he does have to pay for the million dollar property somehow! lol

[@dirtysouthfishing3674]

@@brucepreston3927 that is true, I love Lojo and maybe I was just busting his balls a little bit.

[@eastonscarrepairs7207]

definitely needs a carb clean ultrasonic cleaners work super well for carb cleans. I would recommend a carb rebuild kit jetting may not be correct could be another reason for the engine bog. the axle may just need to be replaced and I'd probably replace the u joints just cause they could be loose. get the rear up in the air and shake the axle down look for the most slop could be a problem.

[@janiehenshaw9496]

It's a clutch use its basically to shift and roll in neutral also to bump start when rolling down hill if dead

[@jacodagray2759]

Hey just a little tip. If you want it to quit hopping when you shift it into gear, you need to adjust the idle on the carb. If the idle is too high it gives it too much gas and then when you put it in gear it’ll jump. Turn the idle down a tiny bit and it will slip into gear smoothly

[@yswkushh4207]

it has an idle twist on the side of the carb bc i also have a pos artic cat lmao

[@Thebassking83]

U paid way to much!!! $1,500 tops,starter,brakes,cv axle,carburetor and more!!

[@RyanRyker]

You need a starter, carburetor, maybe flush the fuel line, brakes but check your fluid first bc low fluid will reduce your brakes too. Heck due a complete flush on all your fluids including gas. I say flush bc if its a 20 yr old vehicle im sure u got some sediment in there. Also check the gap in ur spark plugs and wires maybe needing a change. Also any filters if they need them. Sounds like a lot but 20 yr old vehicle parts are really cheap. Im still running a 2002 chevy s10 LS truck. Works great, i just stay ontop of the maintenance, and do yearly checks before winter to ensure everythings good going into snow season as im up in Canada. Also that clicking in the rear is prolly a control arm or ball joint, all are easy to fix and u could prolly do it at home. The carburetor will need to be adjusted though. U just arent getting the correct air to gas flow. Itll be a beast whrn shes fixed tho. Good luck cant wait to see how it does when shes fixed.

[@justinbryan370]

I would start by cleaning and/or rebuilding the carburetor. Replace the axle with a new one. And then do regulat maintenance on it. Start with spark plug, fuel filter or lines if it needs it. Oil change and changing oil in the front and rear differentials, check for wear in the ball joints and tie rods amd tie rod ends its all easy to do with basic tools. As for the brakes. They may just need bleeding and new fluid or new master cylinder and calipers

[@kylelong6176]

3k for an artic cat sorry logo love the videos but that is a no go they are one of the worst atv brands

[@sitawney5914]

Say million dollar property one more time

[@remingtonwendt7756]

Dude, it’s 200+ acres with water sources all over, and it’s in the southern US, it did cost damn near million

[@fishing90sports99]

Lojo you make some of the best videos keep coming out with bangers of videos

[@anthonylucido1195]

It is the carburetor 100%, had the same issue. My side by side started perfectly, but when given throttle it would die, just like your 4 wheeler. So just get a carb cleaner kit and clean out the carb and it should work.

[@joshmilnerjm]

Rear hub assembly is the clicking, that's a easy fix and the carburetor need cleaned and adjusted that's why it's bogging and flooding. Breaks need adjusted or replaced. That hand and foot break should have pressure to it. All easy fixes and not real expensive. Motor sounds good though, runs nice. Over paid some but all easy to do. Good luck man, have fun be safe...

[@wickdteddybear1169]

For sure carb cleaning. Drain gas tank and clean that. I'd put new fuel line and filter on it.new plug.For brake good chance the cable is stretched out so could just need a cabin.

[@That_blu_09]

If I remember right from our arctic 500 that’s just a couple years older. Choke lever down is choke and up is not choked.

[@cartersmith4865]

I don’t know much about that quad but seems like that lever that you think is breaks might be a clutch that you need to use to take off and shift gears could be causing it to stall on the hills and the jump it’s doing when putting it in gear and there should be a foot break on right side on the foot rest as well

[@onemoreround6820]

I have been commenting that you have to keep up the grind and now you're really grinding the gears

[@WATCHINGMYBLOCKs]

Thanks for the upload

[@jaywickham2891]

Yeah I just recently bought a 2002 Honda foreman 500 for 3 grand probably one of the best deals runs excellent

[@TheCaptainbeefylog]

Take it and get it a tune up and serviced. Have them give you the laundry list and fix it over time. Sounds like a CV going out in the back. The starter issue is probably a sticky solenoid or relay. Seems like a carburetor rebuild is in order. Duct tape will have that seat looking like new! lol

[@caseynploch8737]

So it won’t go up the hills and through the mud because it is bogging because the carb is old and need to be A. Replaced B. cleaned or C. rebuilt and tuned, the clicking in the axle will take some money but an easy fix, i’d also look into changing the oil and air and fuel filters to be safe as well.

[@wesleyadams9566]

It's most definitely the carb it needs cleaned and tuned I had a moped and 4 wheeler don't he exact same thing cleaned it up and tuned it and ran like a dream

[@rjmiller1263]

I would say in need a new axle, air filter carburetor, and a starter all that is pretty easy work I would do that sell it for more and see if you could work your way up

[@jasonrodriguez3182]

all I can tell you is that for the brakes, just go to any mechanic shop around you and ask them to replace those brakes, looks to me like the brakes are a little rusted and worn out so I think with like $250 you should get some knew brakes, just no sure if installation is included, you know thinks down here in Florida are more expensive

[@massbassattack4510]

Artic cat is now known as tracker off road through basspro/cabelas... they bought the name and rights some time ago but the axels are not hard to replace... i worked in the tracker center for a good time and never seen one that was hard to repair. I saw ones that were older than 20 years come through the shop as well, its good he replaced the rear end. They also dont like low rps/low gas they like to be at high throttle at all times lol a 400 is a good piece of equipment to have thats for sure

[@jamestayse1476]

Probably a carb issue, also check the idle adjustment. Ifs its too high that will cause it to jump when you put it in gear. Love the channel!!!!!

[@gingerbuiltracing5440]

It's the drive belt sensor, if it's not sealed and gets the least bit of water in the belt will slip and normal trip the sensor on the cover which causes it to go into a "limp mode" it's a easy fix just pop cover off. Dry it out good and use clear silicone to reinstall cover, flip the switch that's inside cover and stick back on

[@OXMAN1979]

You should look into the Suzuki quadrunner 500 or king quad. I had a quadrunner and it lasted forever. Only reason I got rid of it was due to needing money. I know the quadrunners have 5 high gears and 5 low gears so you can just run and have fun or make it work. Also mine was light enough the couple times I did get stuck I just got off and lifted the back up and over and away I went. I know there are a lot of good options but the Suzuki I can vouch for. Great vid.

[@fowl_fanatics_509]

Like someone said... carburetor might be plugged up, check out the fuel filter as well that could be plugged up...check the air filter as well man. Might help to change the oli and filter...maybe the spark plug or plugs (if theres more then one)...

[@junkazama9149]

you can recover seat ,change break fluid change pads ,could be u joint look on youtube clean carb

[@Swimbait_addiction]

Hope the new vehicle your thinking about has tracks....the quad sounds like it's not getting enough fuel like the fuel pump or maybe float issues. Maybe just a clogged air filter. Sounds like it's running ok so should be a cheap fix. With a torn boot the axle joint clicking is just because it's probably out of grease. Still all relatively cheap repairs.

[@bfg5291]

There's an awesome ATV mechanic in Ozark, about 30-45 minutes from you. He rebuilt mine around Christmas time and is building me a dune buggy currently.

[@kolbystrnad723]

Hello Joe you need it to hold down your clutch and then shift up into first or second gear that’s why when you just rub it up it’s shutting off another reason why is when you’re not holding down the clutch it’s got nowhere to go so you got a hold down the clutch and then pop it up

[@allenanderson4565]

It's in definite need of a good carb cleaning! Possibly clean the air filter and change the spark plug and fuel filter

[@levicampbell4935]

I would replace the stater and give the carb a over haul and clean the gas tank out and replace the fuel lines and put a good fuel filter. The clicking is your axel.

[@kevinbeansGee]

you got me back into fishing one day i’ll be adding the go to googan rod gold series to my collection i’ll be sure to use your code whenever I do

[@ianmoore5066]

Where I’m from you can definitely get a better one than that for that price. With that being said, I can speak for the prices where you are, and your new at this. I just love seeing you try new things like this. I would also say that I think you have a carburetor problem because it’s doing the same thing that my for-wheeler did recently and a new carburetor fixed it

[@devenwells9632]

I had a 2000 and a 2001 arctic cat 500. I beat the crap out of it and they ran. One was caught on fire and I still was able to get it running cheap and easy. There found more in the north and cold areas of the world. They are cheap to fix and take a beating

[@cyrusking6151]

I just got done watching one of your old videos happy you posted a new one

[@lucebruno644]

Could be the choke cable fully engaging. Possibly just streched maybe u can just tighen it at the engine

[@travisbarr5367]

If you want a good affordable new four wheeler see if you have a CFMOTO dealer close to you. You can get a brand new Cforce 500 that comes standard with power steering, winch, and aluminum wheels for less than $6000. I'm loving the property videos keep up the good work.

[@tylerdeed6018]

The lever on the opposite side of the gas lever is the clutch so when you shift with your foot you pull it in then shift and then let it out

[@motochris8979]

Enjoy it brother but be safe we need these videos and yeah most definitely check your carb maybe throw some carb cleaner to it should smooth right out if not rebuild it

[@PunisherExotics]

Replace the axel and that will be fixed. Tag the carb off give it a good cleaning. Use a wire from a wire brush to clean the jets empty the fuel tank and put in a cheap inline filter then fill it will ethanol free gas and you should be good to go for a long time. Same goes for the starter just replace it and try to use as much oem parts as you can.

[@clydedaniels7257]

As people have mentioned, carb needs work along with cv joints. A new carb runs 50 bucks or less. Use ethanol free gas if you can, when it evaporates it won't leave residue in deposits which will cause issues.

[@johnbaker4847]

OK, you got property, let's see what'cha gonna get... 🤔🙀😝 Yak'ing down the river still sounds like fun. 😊👍🎣

[@fishingwithcollin9024]

Hold the clutch in on the left side of the handlebars it’s the silver thing and slowly let go when you’re slowly giving it gas still be letting go of the clutch and then overtime give it more gas when the clutch is fully extended

[@Wq_edits-x]

You got to rev it up in neutral for a sec when you first get on for it to not bog my atv is a 2001 Yamaha beartracker 250cc

[@OutDoorExplorer101]

deff need to adjust carb, theres a fuel screw and an air screw. turn them all the way in then a quarter turn out at a time until it runs smoother. drain the gas put fresh with additives. if that doesnt work pull the carb soak it in gas over night with the jets removed and soaking then reinstall. adjust air/fuel screw and be on your way

[@trimcrew]

Absolutely carb clean and rebuild. New brakes and cv axle

[@dpineda9851]

I have a 2000 artic cat 500 have had no problems great quad in my opinion on thing is it’s hard to find parts due to them being older and most places don’t carry artic cat parts

[@markdetoma9062]

Seems like a little TLC will fix it tune up carb cleaning spark plugs. Oil change filters changes and a new axle I’d say 3k is fair enjoy it and be safe

[@bradbutcher3984]

If you don't change the starter make sure to carry an long socket extension to tap that starter in the woods. Use a log or something for the hammer.

[@christopherbowling267]

Definitely carburetor, I’ve done a lot of work on dirtbikes and fourwheeler, jets may be clogged with old gas from sitting

[@jj_fishing88]

Got to do some well needed maintenance needs to have the carpet cleaned definitely have to go deal with that axle it sounds like the right rear axle easy fix I have done three of them with my grandfather and yeah that new spark plugs just check everything over real quick and she should be good to go after are you clean out the carburetor or if it’s really bad you may need to rebuild it or get a new one

[@sweatyaerial156]

the way u do things and come about it i love it your such a funny guy

[@NFNADVENTURE]

Replace the axle. Or keep grease on hand. And constantly greasing the u joint. Alot of grease will come out of it because the boot is ripped. Eventually the u joint is gonna snap. Also sounds like it needs fuel. Or a carb cleaned

[@trentaucion882]

It acts like the choke is pulled out. Decent bike! Hell may just be out of gas. With it jumping when you put it in gear makes me think the choke is out or it’s idled up to high

[@ezrabailey7026]

Lol I was thinking if he checked the tank for gas 😂😂😂

[@izghost871]

Seems like it could be the carburetoR stoped up and over heateding bc that fan sould not be over working like that and the axle is snaped in there btw take it to a mechanic

[@joshnations5428]

My grandparents had a four wheeler that popped like that. Mainly going up hills. It ended up being the stick shift up top? The connector bar is loose that puts the engine in gear