I BOUGHT A £3400 CRASH DAMAGED AUDI S1 QUATTRO MORE HIDDEN DAMAGE!!!

[@dan.roberts]

Any older rusty older parts you are taking off pre soak the bolts threads/nuts with some form of penetrative spray

[@JustbeingHayden]

Cheers Dan 🙌🙌🙌

[@Mohammedali-j5g]

I’ve just had to subscribe quality stuff. I’ve just bought my first crash damage at 18. Whilst learning mechanic’s at college. Experienced many obstacles as I’m close to being finished and close to listing it.

[@JustbeingHayden]

Thanks buddy 🙌🙌🙌

[@Nathan_R32]

Great video as always mate. Keep up the great work! Shame parts take so long unless you go to the stealers and pay 4x the price!

[@JustbeingHayden]

I know man can be a ball ache 😂

[@sarah3136]

Great video, you're def getting more confident 👌

[@JustbeingHayden]

It’s cause I was happy 😂

[@CoreyWilliams-eg1hn]

You’ll get there mate , In time you’ll get more and more tools everyone starts somewhere

[@JustbeingHayden]

Sure do man 🙏🙏🙏

[@DIGGER-D12]

New subscriber... found by accident but glad i did hooked already, keep pushing on mate 👍

[@JustbeingHayden]

Ayyyyy thank you really appreciate it 🙌🙌🙌

[@J__HUTTON]

Love the rebuilds will be sick when shes done ❤

[@JustbeingHayden]

Thank you 🙌🙌🙌

[@vagireland3567]

Any update on the Subaru buddy while we wait for s1 parts

[@astonrichardson4309]

Your getting there buddy 👍🏼👍🏼

[@JustbeingHayden]

We sure are 🙌🙌🙌

[@jasonboyle7203]

Keep learning

[@JustbeingHayden]

Allways learning 🤘🤘🤘🤘

[@davidhaygarth648]

Impact gun looks fantastic. How much was it ?

[@JustbeingHayden]

Like 170 I think mate 🙌

[@mrhacker99999]

Have to do my rear lower control arms soon too :O

[@JustbeingHayden]

Best of luck 🙌

[@broomad]

This is just like my Audi TT - every nut and bolt on the subframe had to be heated, cut or drilled out. I would get some MAPP gas to make life easier next time 😉

[@JustbeingHayden]

Nightmare 😂

[@leelindsay]

Feel for u bro head ache after head ache. Need decent patience bro 👊

[@JustbeingHayden]

It will come man 💪💪💪💪

[@jasons4129]

🙌

[@JustbeingHayden]

Big up Jason 🙌

[@TheGazza636]

Considering you doing it outside on the floor your doing a half tidy job I reckon mate

[@JustbeingHayden]

Thanks mate 🙌

[@russellwade7810]

The new videos contents as definitely got you fired up great keep them coming 👌👍

[@JustbeingHayden]

Cheers man 🤘 not far now I don’t think 🫡🫡🫡

[@steveb19111978]

I feel your pain bro’, that car is turning into a real nightmare.

[@JustbeingHayden]

😂 get rid of the bad fit the good 🙌

[@MrAshton75]

Do you wish now that you’d never bought it. I watch your videos and remember this is exactly the reason why I no longer fix my own cars, everything breaks everything is inaccessible and everything is always out of stock.

[@JustbeingHayden]

It can be annoying but I love it 🙌

[@STEPHEN-s31970]

Quick jack😊

[@JustbeingHayden]

Mate so bad 😂 so many tools to buy not enough money

[@joncardy7250]

Instead of using your leg to support and undo bolts just put your trolley jack under to support hub

[@JustbeingHayden]

Gives my legs a work out 😂

[@TheM5Dog]

Should rename this channel to bodge-It and Scarper.

[@JustbeingHayden]

Yeah sound 🤘

[@taza5196]

What Happened to the WRX

[@JustbeingHayden]

Will be back in a few episodes 💪

[@mickoreilly9626]

On a mission one car at a time m8

[@JustbeingHayden]

Keeps my mind ticking 🤘

[@jaffa18two]

Please buy a can of WD-40 and drown the bolts the night before and they should come off easy. Also invest in a hot spanner and you’ll have no problems. Think it would have been best to drop the subframe because you could have taken into the garage and seen everything wrong with it instead of struggling on the ground under the car. Keep going though lad it’s slowly coming together!

[@JustbeingHayden]

Makes sense 😂 would of been easier to drop lol Thanks for watching 🙏🙏🙏

[@TobyKnights]

Bro use some wd40 or penetrating fluid I'm begging 😭

[@JustbeingHayden]

I am just not good enough 😂😂😂

[@JordzyBrev]

Heat is better

[@Mousey-vx4zp]

am not sure how you struggled so badly with a pair eccentric bolts but to see you brute force them arb bolts i am far from surprised your only going to achieve rounding nuts or snapping heads off very poor practice and wasted time and cost on things that a simple spray penetrating solvent and a hand tool 1st would solved or if your going to be as lazy as shown at least run in and out a few times to attempt unfreeze the threads

[@JustbeingHayden]

I didn’t know they were rusty 😂 ah well mate come and have a go solid 😂

[@Mousey-vx4zp]

​@@JustbeingHayden no problem where you located and did not matter if they was rusty or not you just kept trigger pulled till something was going to give either the multi spline bit the bolt head or what you was hoping most for it to just remove bolt pretty poor practices as to showing others how repairs are carried out knowledged or not maybe learn to use tools properly and you wouldnt be wasting extra effort time and money on a project that seems to be heading towards costing more than a non damaged one

[@moneywaiter4857]

@@JustbeingHayden Maybe you should just do what the other youtubers do and loosen them off camera then record them coming off easily lol, You will never keep everyone happy, And anyone that has every been lying underneath older cars knows its never as easy as " a simple spray penetrating solvent and a hand tool" Keep this content going Malcolm , your showing the real problems that come with fixing the damaged cars.. not over editing to make it look easy ..

[@JustbeingHayden]

@moneywaiter4857 cheers man nah I don’t mind man I try to show everything man 🙌🙌🙌

[@Mousey-vx4zp]

@@moneywaiter4857 i have plenty experience in motor trade i use to break cars for living and make good profit from them i rarely had to take such extremes to remove bolts in alot worse conditions and while not damage the parts that where to be sold some even from accident damaged vehicles and historic vehicles that had lived in fields for years ive restored vehichles also and the extremes shown in this video could been very easily avoided with common sence and bit more care at the job in hand i just thought that it was maybe best to point out the flaws he caused for himself in haste to remove things and could been avoided just my 2 cents but 20 yrs working on cars on the side road / on floor no ramp and minimal tools alot of the time but ya carnt tell the ignorant can you rather jus reply in a cocky manner instead bad creator ethics that is wont gain followers doing such things like that i would quite happily go to help him and show him how to approach things and save alot wasted energy time and money i have no issues with that one bit for someone who is repairing vehichles that he is most likely goin to then sell on it should be repaired in a appropriate manner and not without any mechanical knowledge it scares me who could end up next owner from poor workmanship

[@5cylinder91]

some you win some you loose. atleast its content i suppose. and yes, as someone said use penetrating fluid, never just attack old/rusty bolts dry, its cringe when watching these other youtubers not use their common sense and blast everthing with wd/double tt/gt85. gt85 is cheap enough like 4 x400ml cans for 13 quid or thereabouts on ebay.

[@JustbeingHayden]

I shall use it from now on 😂

[@5cylinder91]

fair enough lad. the amount of bolts mr Lockwood snaps would be far less if hed of done so, never go in DRY lad, always use lube xD

[@5cylinder91]

tho, dont mix the two differemt types up and use penetration.......fluid on humans, even tho its implied. i dont think the recipricant would appreciate it.

[@JustbeingHayden]

😂😂😂 Lee snapwood

[@5cylinder91]

@@JustbeingHayden hahah 😆 thats was a good one, had to be said! beat me to the punch there gosh dang it. im tempted to start doing videos but dont know how to go about it as my car has all the mods done to it you can do on stock internals. and the cambelt etc isnt a driveway job unfortunately.