I Bought A DESTROYED Mustang Mach 1 At Copart Salvage Auction!

[@gilbertwashburn7095]

Whoever was in that car if they're alive it's a miracle

[@Two_trucks]

I wanna know if they made it out alive and the story behind this wreck

[@rickyfuller6807]

Hey guys I wouldn't mind having that block because I know what I could do with it and them heads

[@buddyrebel_Garcia]

He died of aids actually

[@weseethetruth158]

They definitely lived no biohazard warning on the car.

[@mssedmebich1621]

@@weseethetruth158 You can die from internal injuries without spilling a drop of blood. They might also have made it to the hospital before they died.

[@gregoryscott8661]

I don't want anything from you guys. I have a 25 yo son with cerebral palsy. He does everything except walk. He watches every video of yours and now he wants to fix cars. Keep up the great work. You are very inspiring to him. Thank you.

[@commanderdante3185]

The fact that you did such an excellent job breaking it down is a art. This is amazing content.

[@roberttowsley8958]

I am ADDICTED to your videos. Keep up the great work!

[@pavel1809]

not only you me to LOL

[@rev68]

As a happy owner of a '21 Mach 1, I can say with authority, the front fender gaps on that salvage are still better than the gaps on my front fenders.

[@josephsaccomagno2986]

Depending on how deep the damage is to the cylinder wall, will determine if you can bore and hone it or if you have to sleeve it

[@mattfisher4256]

Could’ve saved the cams and maybe the heads and a few of the pistons/rods

[@daveh2612]

I’m stunned how much this car went for at auction.

[@CesarBuildz]

To much? Or too little

[@daveh2612]

@@CesarBuildz way too much, there was nothing of value

[@CesarBuildz]

@@daveh2612 lately that’s how auctions have been, I wonder what others do with them when they over pay. I’m right on the edge on mine right now probably won’t make a penny either

[@daveh2612]

@@CesarBuildz yeah I’ve had to be super picky about the cars I buy now because between inflated auction prices, fees, Transportation, profit margins are just not there

[@robertmasino9643]

At that point it’s not even a car it’s a paperweight

[@silverback8183]

This most likely is the result of mom and dad buying their little angel, who never miss behaves, a high performance car so he can be cool like everyone else😂

[@johnstinnett1571]

RIP... I work on the same street. Second right as you pull in the business park. Always entertaining to see the cars you got coming and going

[@joebear5937]

R.I.P. I hope 🙏 everyone survived that wreck.

[@petervoros8221]

OMG I can't believe how much Good parts you are chucking in the skip!!

[@MadcapMachinations]

I love the reaction to Fernando's comment about the wheels.

[@larrylaverne9547]

Mach 1 emblem, please! Love the video! I just snagged a sweet 2001 Ranger 4x4 for $775 from Copart. My wife & I swapped bumpers & a tail gate from a wrecking yard from across the street, and off we went!

[@Thedoug369]

That musta been a helluva wreck, did y'all find any teeth in that engine? Lol.

[@markduffield1147]

Wow! What a major bummer. I got smoked on this one too. I put too much hope initially about the Mach 1 and I really thought that the motor would be good. I'm curious about the crash that killed this car. What the heck happened? My lord the car must have been going extremely fast and rolled end over and end and finished with rolling on the side for a few more barrel rolls. RIP

[@jezcrook]

Wow you guys are amazing at making great content. I just loved the chip challenge, I could not stop laughing 😂 that car was smoked. Keep them coming as we love your videos in the UK

[@martyjones7225]

R.I.P. Mach 1 The Mach 1 emblem is a throwback to the one used on the1970 Mach1. Designed in the '60s should be enough explanation

[@ADEDButchie13]

Muy picante! I ain’t scared of a lil blue chip. Btw great content boys, this is one of my new favorite channels. Keep up the good work!

[@gd1996]

The engine in my challenger came out of a car just as bad and the intake and so on same deal... water in the intake valves, but runs perfect. The no water in the oil pan was a good sign.

[@TinyAndersontinysauto]

When using the twist off sockets to take off the wheel locks, put the wheel lock in the vise and turn the socket clockwise and it'll come right off.

[@kickit59]

Jeez back in the mid 70's friends of mine were wrecking Mach 1's! Looks like nothing has changed! Back in 03 I rebuilt a totaled 03 GT Mustang! Fast forward to the summer of 05 and it had a close encounter with a 1 ton truck! This time there was no rebuilding it or even thought of rebuilding it because it was bad and the engine was stuffed into the firewall. The bright side of the deal was I walked away with no lasting injuries! I bought another new Mustang and in in 07 I bought a Parnelli Jones Mustang that I still have with 12K miles. I have had great luck with Mustangs as far as surviving the wrecks so I am a fan!

[@katieandkevinsears7724]

I'm jealous. I've always wanted to get ahold of one of those. I had a 2007 GT in Grabber Orange. I turned it into a Twister Special tribute. Fortunately her fate has been brighter than the poor car in this video even though I no longer own her.

[@kickit59]

@@katieandkevinsears7724 Kevin back when I was a kid riding my bike in my neighborhood and there was a local Guy who would drive by in a new orange Boss 302. I was ten years old back then then in 1969. Right then I promised myself one day I would get one them. Anyhow even though I owned some cool cars over the years I never did get my Boss 302. So when I first saw my Parnelli Jones Mustang I decided I had to do it. It now has 12K miles after all these years. And it is original right down to the tires & the window sticker. I was just out to the garage to check the batter maintainer and all is well. So one day maybe in a couple of months I will take it out for a cruise! I wish you luck on finding your dream Mustang.

[@danielsplayhouse3804]

Coyote engines need to be sleeve they punch out the cylinders in the aluminum and then they Chrome them.

[@gilbertwashburn7095]

Old school Craftsman deep well sockets in the 70s work great to remove wheel locks they're thin and expand just enough to grip

[@chucklarussell6443]

RIP, this one hurts my soul 😢

[@chucklarussell6443]

Left you a VM

[@dougwatson6406]

How much for the front calipers? Are the rears any good? I've got a Mach 1 but my calipers are black.

[@stevenhanna242]

The coyote engine is freak off nature great motor

[@thatsmyrc]

Such a awesome channel so very interesting too see what projects you guys bring in. What’s the avg man hrs on a tear down on a smoked out car like this?

[@basvandecamp4553]

I would part out the engine. Or buy an engine with worn rod bearings and damaged crank. Fix that one with the crank and most likely 2 con rods of your engine. Bring the heads to a machine shop to check them and/or repair them and sell those to somebody with a broken distribution. The damaged cilinder block becomes a nice table for your man cave😉.

[@chrishughes1273]

I want your knob 😂 great work guys, tough shift though on this one.

[@andrewbeetz2196]

Yeah boys that thing is definitely smoked, great content though thanks for making it!

[@FadedSparkx86]

You left the Sync Display and computer in there when you scrapped it? That's a couple hundred bucks right there. The 8" screens fit so many different vehicles.

[@scraplifegarage]

It was obvious in person water got to it from the rain.

[@FadedSparkx86]

@@scraplifegarage ooooh rough. Would have been the easiest money on that car. 4 whole screws to glory 🤣

[@LeeC]

MUY PICANTE

[@dcpowered]

Love the one chip challenge and back to work! This could be an idea for every video. Take a break and do something fun for a minute and then keep going with the work.

[@chrisadams1063]

The 4 Coyote engine is an all alone of engine block with steel sleeves. For the pistons, these pistons can be replaced along with the other intarnold parts. The crank shaft. Everybody has to take measurements on these parts, including the rod's Manes and And make sure that it can be useful even when this engine is showing some cracks. It can be repaired, but it is up to the person. To either make the repair or a scrap room. The engine slaves can be reinserted. Can be purchased anywhere. You can also purchase the entire bottom in assembly and the cam shaft. Wherever you want from the aftermarket. Every internal part and external part can be purchased in the After market. The expense you're gonna experience is the expense of 4 cam shafts instead of one. This requires a certain amount of technical know how that makes sure the cam shafts and the rotating assembly are working in perfect timing order. In assembly. The assembly is still worth money. The camp shafts are still worth money. They're worth money because you can send these out to the aftermarket and get a new grind on all 4 camp shafts. Saving money, this is a selling point. As long as the camp shafts have not had any bad reports from any examinations. From any machine shops to get these examined is should be a very affordable price and it should be done. I'm clear in the ground, including the measurements of the intake and exhaust lobes and its separation in between intake and exhaust lobes. The timing chain is also gonna be pretty much good. Condition once it's inspected and examined for chain stretch. It's including the guiding parts of the timing chain assembly in the Ford Coyote, the 8, which is the 302 modular V8. Is the Ford module V8 and 302 cubic inches is the most popular Ford engine that they have ever produced except for the Ford effi Big block and small block ethy blocks. The 302 modular Coyote VA was a demand from the African market. And it's fans of the 302 small block withe single camp shaft and then lifter assembly. This makes it much more popular to have 4 cam V8. Then the 1KMV8, you know, 4K M can produce up to 2000 horsepower or more. For all out Drag Racing, this would not be a small tire setup for street car. This would be a large tire Drag Racing car. But this engine is really popular. It just needs examination of all the parts to make sure nothing has fractured, not fractured. The cam shaft not fractured any other parts in the bottom in rotating assembly, including the rotating assembly of the camp shapps, including inspection of the lifters and lifter assemblies and Springs. And further inspection into the vows. This engine also can produce this horse. Power and be a very potent small block V8 with a available aftermarket. This forward module of the 8 with 4 cams and lightweight vows can really move down the road and down the track, being the street and strip car that someone always wanted. In a whole new way with his traction control systems.

[@2greybear]

I ,as a novice, took one look at that Mach 1, and said to myself..I don't think that one is repairable..Hence a parts car..Enjoy your vids.

[@GearScar]

Its funny that I knew it was a Mustang at the start of the video, funny part is I was like Yep that's a 2001 Mustang can tell by the body.. wait, its a 2021??? I've seen a lot of wrecks, I can tell quite easily that car was airborne and flipped end over end, probably coming to a final stop on its roof, speed would've been the biggest factor in this wreck.

[@freedom6919741]

You guys would be a blast to work with. Always having fun.

[@christopherayers1435]

You can press out sleeves put new one in also area that need fix aluminum weld and fix the areas that need it

[@joshd1033]

Rip to the stang Mach 1 be zooting into a wall and then a pond I’d guess. Just a big RIP 🪦

[@johnroof2663]

That is the true definition of toast!

[@guys72ss1]

What did you say? You want to Bob your knob. . Yes I wanted to Bob your knob. 😂

[@BlueNation316]

Hey man great videos. I remembered you asked about the cars under the red wrap. They go under investigation due to a serious accident or someone was murder. That just mean they insurance company haves investigators and lawyers involved with the case. They’d cars that have been on hold for 10-20years on some lots

[@mostlyautovids]

The only redeeming item in this entire video was the Gear Wrench hack. The crew hated the car before the wreck 😂😂

[@beamngbois]

lol mustangs good video keep up the great work "I want your knob!

[@dylanmantel6383]

Biggggg ol RIP to the dustang

[@raycash9368]

New Subscriber like this type of content !

[@henrythe83rd18]

6:55 I can't believe you used a chisel on 2021 Mustang Mach 1

[@concretecars]

Get a ductile iron blade for your chop saw they never shrink in size last a long time and cut through cars like butter

[@ArmadenRestal]

Just out of curiosity, what M chassis was it?

[@bdahl686]

Well worth buying for the content alone! Awesome video

[@johncarroll5494]

I'm curious-Do you have any knowledge of your purchased vehicles...if there were any fatalities?

[@schafer240]

Cant wait for the Dollar break down on this one

[@PaintingRosesBlack]

22:20 why did you put a ford inside another ford?

[@kobetrux6259]

Shift Knob: "I want your knob!". i would use it for a cool project to build

[@olderbutnowiser6701]

Subscribed. My first time watching you nutters and you are all fantastic! 🍺

[@bobbybailey1705]

Strut bar would look cool hanging up with other parts an skulls an poster hanging up plus with all the lights I use

[@kobetrux6259]

Strut Bar Emblem;"Fords A FRAUD". same as the fender emblem making a cool poster

[@philliphunter7077]

Rip 🙏..... awesome video... hope nothing major broken on your drive train and something cool to come ...would make some good wall of shame pieces... lol

[@kmweightlifting38]

Great video guys!!

[@jayharper2252]

Somebody's last ride was in that mustang. Mercy God!!! I'd like to know what the story on that was.

[@mrsirstripes6244]

I definitely want that knob 100%

[@NovitecGG]

How come you guys don't sell the exhaust? It looked good to me!

[@willieseba]

Great show my friend Ford stand for (found on the road dead) LOL

[@wilfredocaban3542]

When I own a tire shop a good 13/16 socket would remove wheel locks easy I would use a socket or a Snap on star ⭐ the one that has the 4 sides .

[@wilfredocaban3542]

@scraplife_giveawy let me give you a prize 🏆

[@stevenrice7979]

Muy picante, il give it shot fellas... But dam that's a lot of damage eg, valve covers and ac compressor, decapitation

[@Rennsport-Media]

What’s up with that silver 997?

[@scraplifegarage]

U will find out soon enough 😁

[@Rennsport-Media]

@@scraplifegarage cool…but whatever you’ll do- please don’t swap it!

[@Jsiimms]

I was the one who asked about it in the first place! Muy Picante!

[@carsondees7175]

The 5.0 is fine ? Just use a hone on the walls and put it back together? As long as the block is not cracked run it

[@Thedoug369]

The block is cracked in like 3 places.

[@mssedmebich1621]

Arthur Tussik would have fixed it!

[@DEproductions]

How much for the radio

[@BaabsAuto]

Love all your videos. Much love from Nigeria 🇳🇬❤️

[@wrckls535]

I want your knob. huge mustang fan myself would be an awesome utensil!

[@icephoenix1188]

Where are you guys located?

[@colchronic]

Honestly if the rust pitting isn't very deep you can just use a dingleberry ball hone

[@schafer240]

dingleberries are junk--> They out of round cylinders. Stone hone is the only cheap solution if its viable after a mic.

[@cyarrick]

You tossed the hood would have bought from you as wall art at the place I work

[@scraplifegarage]

I can dig it out of the dumpster for u? 😁

[@victorgalan1884]

Did you guys throw away the mufflers 🙈

[@___123n]

Why didn’t you take the seats ?

[@joeemahizerjr6562]

Yeah, you ever think about checking the glove box for a key like that put the lug nuts

[@alexkroeger1]

I want to want the knob, but have no earthly idea what I’d do with it 😂

[@jimkuball3597]

Does the computer have a last speed in it

[@kobetrux6259]

Mach 1 Fender Emblem: "RIP". i would make a cool mustage mach 1 poster

[@akgraywolf1]

I'd ask for that weak ass potato chip, although my doctor recommends not eating molting lava on the 1st date. If you still have one of the "MaCh 1" emblems, I'd be more than certain to display it where nobody but me will ever see it. Your shows are pretty crazy at times but always fun to watch. Thanks for entertaining us all, and keep the speeds as high as you dare. Thank you

[@mattfisher4256]

Could the brakes have been saved?

[@DarrellCallaway-v8d]

Do you ever find blood and stuff in the car

[@dragonladyz290]

Of course you can't find the wheel lock.... It's probably in some Indiana hay field! This thing was definitely "SMOKED"! Wow!

[@devonsimpson8069]

I want your knob! Just started watching a few months ago been loving the videos!

[@solofalcon]

when are you 3 gonna start a Top Gear style show, you 3 have chemistry

[@MTbone7]

May be cool if you knew any history of these cars and what exactly happened to them

[@spearsie60]

I love this part of the channel. I’m 19 again for a few minutes. 😂

[@robertobuenrostro2781]

Comment... Send me any thing. 👨‍🔧

[@outdoorfreakhunting4197]

Get you some Diablo blades for your sawzall!!! home depot sells them 1 blade last a very long time!!!

[@P-J-W-777]

Kinda curious as to how many times that car rolled? Looked like it may have went end over end with the dirt in the exhaust pipes. The occupants were definitely extricated via a roof roll back with the jaws. Done it way too many times. Hope the occupants lived through this.

[@onlydeluxe]

i actually think i found the crash online, street racing ended in the mach 1 flipping 6 times. guy was 34 and survived. was life flighted to the hospital in his area and was expected to live 🤷🏻‍♂️ happened in tulsa. but it also could be a different mach 1, so don’t take it as i found the exact one.

[@scraplifegarage]

This car came from Indiana. Sounds like a similar accident tho!

[@DrRick-dq4bb]

Do you ever wonder whether the driver of such a terrible wreck survived?

[@johnkauffman6347]

I like these SMOKED cars heck it made me. SUBSCRIBE

[@mustangmarty8491]

That car flipped end over end

[@bgm1116]

Do a light hone on the cylinders, if rust penetration is deep there is always sleeving 🤷🏽‍♂️

[@papabearof3]

RIP gives the new meaning to Found On Road Destroyed

[@427oldguy]

Great KZbin show. Need Mach 1 emblem for my tool box😎

[@northernpatriot9078]

wow guys I'm subbed I worked for john Beier in anchorage and I have seen him do miracles but its a lot of work wow good luck guys wow you guys must be Master body man and everything eh