Thank you. I was feeling a little overwhelmed by an old single cylinder motorcycle engine I’m restoring. You have put my issues into perspective. Best of luck.
@FlightEngineering19 ай бұрын
However big or small, it`s equally amazing when they come to life!
@Stevo736608 ай бұрын
It is actually a lovely piece of Engineering. I certainly wouldn't like to tackle it myself but I can appreciate what it is. Truly awesome.
@MC-nb6jx9 ай бұрын
Never ceases to amaze me that some clever person sat behind a desk with pen and paper and designed all this😳👏🏻
@calmacgregor70578 ай бұрын
Never seated? Lol
@MC-nb6jx8 ай бұрын
@@calmacgregor7057 … Thanks for that, no idea why predictive text changes words like that? edited👍🏻👍🏻
@thamesmud9 ай бұрын
Its great that you are bringing this old girl back to life. Its sad to see them bent up and gathering dust. I'm sure the brave lads who flew with it would appreciate your efforts. I did my apprenticeship with Paxman during the 1970's so i've always loved the V engine.
@noonehere17939 ай бұрын
Being a pilot and familiar with the merlin i think that your engine was in a controlled crash rather than an uncontrolled crash simply due to the lack of structural damage. Well done find and rebuild!
@jesuschrist22849 ай бұрын
You sure its not a tank engine?
@PatGill-tu6oq9 ай бұрын
Tank engines do not have a supercharger and I believe the crankshaft is different. @@jesuschrist2284
@BaikalTii9 ай бұрын
@@jesuschrist2284 it had a propeller when found. just fyi, tanks don't use props; steel tracks are normal
@harwoods119 ай бұрын
Wonderful sarcasm 😂
@MarkSheppard-x6i9 ай бұрын
Could easily be just a flat spin/fall - no forward motion. Seen a few photos of bombers that have just hit the ground following flak/nightighter loss.
@PurityVendetta9 ай бұрын
I enjoyed your intro video immensely, thank you. I understand this kind of engineering given the I work restoring vintage and classic motorcycles. I found the condition and preservation of the engine remarkable! The college I attended as a 17 year old had a cut away Merlin, supercharger and reduction gear assembly in the foyer of the engineering block. The collage is long gone but the cutaway exhibits are on display in Stoke-on-Trent museum and art gallery as part of the Spitfire exhibit. As a young person I found them fascinating. I admit to being slightly envious of your project, I'd love to work on something so fascinating.
@robleary33539 ай бұрын
Love seeing old bits of kit bought back to life (especially a Merlin). Great job!. Can't wait for future updates. Nuff said 🙂
@urabampot9 ай бұрын
My Grandfather John Kinsella was a draftsman/machinist and then final inspector for RR all during ww2 in Glasgow, building and working on all makes of aircraft engines... So he probably built that engine or worked on it, or inspected it... blew my mind when i saw this... amazing!!... if you can find out if he did by the serial numbers, id love to know for sure... RIP John!! (*subscribed)
@shug8319 ай бұрын
I served my apprenticeship at Hillington, Glasgow back in 1980's. At the rear of the training centre there was an stripping/overhaul section for senior apprentices that stripped Merlin and Griffon engines. I remember they got in a Merlin engine from a crashed aircraft, that had been in a bog for many years. Once stripped, the only component requiring replacement was the crankshaft as it was twisted and that was replaced out of stock parts in East Kilbride! The used pistons made excellent ashtrays mounted on turned wooden bases for various Top Brass in RR. 😉
@patrickradcliffe38379 ай бұрын
I have question about the piston rods. Does the piston rod that runs in-between the split rod ride on the same bearing? I see the split rod has a copper bearing that bridges the split.
@FlightEngineering19 ай бұрын
No, the "blade rod" has it`s own shells and runs on a journal machined on the outside of the big end bearing block. This means that the blade rod only oscillates while the big end bearing in the centre runs a full 360 degrees as in any other engine.
@robhavock94349 ай бұрын
Incredible technology that is not dated, in my opinion, as i am old enough to know how well-made things were done In comparison to today, different steal and aluminium not available today.
@bobmorris45038 ай бұрын
Totally mind blowing. I have worked on one or two much much smaller engines - lawn mowers/scooters etc. To have the wherewithall that you clearly have is a great credit to you. Enjoy getting it all back together and then running the beast . I wish you the very best. Bob
@shaneraven26218 ай бұрын
I bought a 1275 engine to restore for my Austin Healey , I've never worked on an engine before and it scared me to death, And then I see working on this magnificent thing and I have nothing but admiration for you and your obvious skills 👍🏻👍🏻
@richardtarr27458 ай бұрын
What a fascinating project on a beautiful engine! You clearly know the Rolls-Royce Merlin well and have the skills to restore it. A shame there's no way of telling how and when it crashed but I'm looking forward to seeing the progress back to a running piece of history. Thanks for sharing😎
@andrewmacdonald48334 ай бұрын
Absolutely stunned at the condition of this engine...testament to the quality of the materials used and the craftsmanship that built and put it all together....I'm glad you found it...
@RobertLBarnard8 ай бұрын
Beautiful parts. Beautiful pattern work, beautiful machining. Thank you for going over the engine with a camera so well, and for posting it. I've never seen a disassembled Merlin before. Regarding the zero-oxygen water: seems reasonable the water in a pete bogg would be void of much oxygen.
@alistairwillimont9 ай бұрын
Amazing how well preserved it is! looking forward to seeing it progress. :)
@wildcoyote349 ай бұрын
i added a subscription ,, i have always loved the Merlin engine ,,i would love to own one myself ,, I own several other WW2 engines ,,my favorite among them is an Allison V1710 -27 ,the only actual aircraft engine i have ,,,it was originally a P-38 engine ,and i got lucky when i found it becausei have both the original propeller but also the turbosupercharger ,it is in running condition now , i bought it at a farm auction in 1993 ,nobody knew what it was , it was in a huge crate fast forward to 2013 18 years of work and fiddling i ran it at the county fair , and my home towns fall engine / tractor show ,,it along with a half dozen other engines is mounted on a 40 foot trailer ,,the caption on the side of the trailer reads 1500HP the worlds most powerful portable fan
@williambarry80159 ай бұрын
That is awesome 👍👍👍
@monsieurcommissaire16289 ай бұрын
That's awesome. The Allison V1710 is and excellent and rather underrated engine that gradually seems to be getting the love it deserves. It's unfortunate that they didn't get to fully develop the turbo compound version; I understand it generated some staggering horsepower numbers.
@ianandjohnandmaniandreni93239 ай бұрын
You should contact the Guinness World Record people and get that made official.
@wildcoyote349 ай бұрын
@@ianandjohnandmaniandreni9323 it's just a play on words ,,there's another guy with a similar setup to mine but his says the worlds biggest portable fan
@FiveCentsPlease9 ай бұрын
Always nice to see you on KZbin, Peter. I would also love to see a few videos on some the rarer engines you are building as well.
@garydaniels14208 ай бұрын
Someone say P51 .???
@bryanst.martin71349 ай бұрын
Upside down fits a simpler pallet. I have a tiny Subaru motor that doesn't like sitting on anything! A much larger GM 6.5TD that is easy to sit on a pallet. Shipping crates are cheaper if they don't need engine mountings. Nice score Captain!
@FPVMystique8 ай бұрын
What a huge acquisition, from a historical and financial perspective. Congratulations on owning a Merlin!
@triman5008 ай бұрын
My father working with RR Pre war through to the 70s. We was a service Rep with them and did his apprenticeship at Derby ( like myself). He looked after Merlins during the war and post war. Worked through the early jets in Vampires, Venoms, Canberras etc. Pretty sure I have pilots notes for the Merlin. My experience was Ardour, Spey, Phantom Spey , then RB211. Great company RR.
@eddiepires39989 ай бұрын
Fellers like you have the patience and the knowledge to work on engines like these - you are keeping history alive . I will be pleased to see the final result of your project 😊
@karensavarese56849 ай бұрын
It looks to be in great shape overall. A fantastic piece of British engineering in its prime. Love it!,,,Izzy Strong,,,,,
@brucemiller81099 ай бұрын
As an Airframe and power plant engineer in America I would say at 19,000.00DM? or USD or Pounds you did fine. Ive worked on P 51's over the years and can say that ANY engine cases/heads/crank/ supercharger part alone would be expensive. When I started working Mustangs back in 1974 you could buy a Yellow tagged (Military OH) engine for about 12,000.00USD out in calif...a parts dealer had over 100 FS, today same engine would be 250,000.00USD AND another 90,000.00 to have a shop certified it. Well done.
@FlightEngineering19 ай бұрын
Thank you! Yes, they have got more expensive and parts more difficult to acquire here in the UK. The real killer was when Aviation Jersey sold out to Vintage V12s, that hurt!
@Peter.w9 ай бұрын
The Peat did a great job preserving the merlin Peter!
@Ps1198 ай бұрын
Glad you have the ability and motivation to restore this important historical engine. Well done.
@fraserm8039 ай бұрын
Fantastic find, fantastic video, fantastic knowledge for a bloke like me to take in. Love it.
@busterdee82288 ай бұрын
That Merlin probably flipped on its back to play dead until the right guy came along. It appears, now, to be in good hands. Best of luck on the resto; you're doing the 'world' a favor.
@buffaloj0e9 ай бұрын
Amazing, I hope we see more of this. It’s fascinating to watch and not often seen unless you are in the right circles.
@azazeldeath8 ай бұрын
It still amazes me to this day just how similar engines really are, regardless of size, fuel type or even use (generator, car, bike, truck, boat, earth moving machinery or aircraft) of course to an extent, i was only a lowly automotive mechanic, actual modern day turbo fan engine ive never worked on, have worked on radials and even jet turbine engines once. But for the most part they are all very similar. Never saw the inside of a merlin until today, and i could follow along no problem.
@jjhpor8 ай бұрын
That first closeup of the bare lock at about 5:00 really reminded me of a Porsche 911 block. The details of the mounting surfaces for the cylinders with the skinny studs sticking out is a perfecrt match. The crankshaft seems to be built up instead of a single piece. Once again I'm reminded of a Porsche engine but an older one. The early 356 S engines had a built up crank by Hirth. He marvels at how clean the inside is. I've worked on car engines from the 1930s to the '80s and you never see modern engines that have only seen detergent oils with that much gunk inside. I've seen engines with 300,000 miles cleaner than that. I'm not refering to the grit from the crash site but the thick black goo everywhere. Apparently there is no separate cylinder head. That makes an amazingly complex chunk of metal to cast and machine. the old Offenhauser engine used in Indy cars was made like that. I assume, since the block assembly was aluminum that there were iron cylinder liners. Fascinating engine!
@FlightEngineering18 ай бұрын
Yes, detergent oils are the way to go. The Merlin changed over to a separate cylinder head in 1942 due to coolant leakage caused by increasing boost pressures being applied.
@rivalrepairs8 ай бұрын
What amazing engineering went into that engine! it was impressive how it went from 1000BHP to 2000BHP over the length of the war
@keithgarland34049 ай бұрын
Will certainly be watching out for updates etc, have bought and enjoyed your engine build videos, fantastic engines.
@fredfarnackle54559 ай бұрын
It's in pretty good nick, considering, after all those years. Nice find!👍
@jumpfortyfour99659 ай бұрын
love seeing these engines being restored by people who know there stuff ,thank you for a super video I have subscribed .
@MineCraftJunky289 ай бұрын
I hope you get a Wireless Mike For next time. I watched the video and I barely heard a word you said!
@jonfisher45138 ай бұрын
I look forward to seeing what you can do with it. It doesn't appear badly damaged and you sound confident so have fun. Like you, I'd like to know the history of it. You suggested it had been recovered from a Halifax crash site so there your lead I guess. Good Luck.
@JFinnerud9 ай бұрын
I know I am always in for a treat on this channel! Season's greetings from far up north 🎄
@FlightEngineering19 ай бұрын
Thank you!
@171apples1719 ай бұрын
What a beast, id love to work on a motor like that. I bet the pilot controlled it till the end, and maybe it rolled after touchdown. Its crazy that it wasnt seized up.
@davidmuir68498 ай бұрын
Fantastic clip . I worked on the Griffon mk58 in the engine bay at Raf Lossiemouth in the 80s we also reconditioned 4 Merlin’s for Charlie church at the time 😊 Regards Dave from Scotland
@pssstttchhh9 ай бұрын
Bro really pulled the “didn’t see you there” intro
@ATomRileyA9 ай бұрын
Great stuff, looks pretty good considering. Cant wait to see it more of the build up.
@jeremysaunders99169 ай бұрын
An amazing project, jealous and in awe of you skills and knowledge to be able to tackle this incredible engine, well done and look to your future progress. 👌
@zaharib8 ай бұрын
I had the chance to rebuild a RR Phantom II here in Malaysia some years ago. First and only RR I have worked on. The design language of the Merlin engine is very similar to that Phantom engine... thanks for the video sir!!!
@markblundell94618 ай бұрын
My goodness. That was a a lot cleaner than some of the Motorcycle motors I have had to open up.
@woodennecktie9 ай бұрын
yes a sharp eye indeed was seeing the supercharger on top. but it looks like a great project , looking forward to see it run ... have fun !
@richardbaxter20578 ай бұрын
As a “non” engineer type, I’m not qualified to say anything about this engine but I’m amazed by its “cleaned up” state....I love the colours in the different components, something that you don’t normally get to see, unless you’re in a workshop environment and it’s not a bland expanse of “Silver”, either but a far more subtle mixture of mettalics....lovely to look at, even without a technical background! Good luck going forward....will you pursue it’s historical lineage, using parts numbers, etc, or is that too difficult to do, given that we’re nearly ninety years on?
@automan12239 ай бұрын
Kermit Weeks / Fantasy of Flight in Florida USA has a big museum. He is a big name in the restoration for vintage aircraft. If you reach out to him he would probably buy it.
@davekreitzer43589 ай бұрын
Now you can buy the planes to put them in , for a proper display !!! 👍🎯
@JacobTyo9 ай бұрын
It’s been a dream of mine to one day find and restore a Merlin/Meteor engine. In the US they are very hard to find. Until then, I will enjoy watching you build my dream project.
@DavidBall-v5i9 ай бұрын
Incredible engineering for it's time and age. Thanks!!!😊❤
@martinjohnharley2029 ай бұрын
Fantastic interesting video and info. Im not usually into aircraft youtube vids but ive subscribed to you now. Just one sugggestion...maybe get a separate microphone....the sounds is pretty muffled at times and the annoying cracking/shuffling noise when you fumble with the recording device is off putting 👎. I look forward to the next vid.
@stanleybest88338 ай бұрын
Divco rebuilds and inspects crankcases. I'd just compare RAF to USA practices. Cases don't always get shaved for rebuilds. A good engine found is a "Lucky". You should find parts spares. I'd restore it to ready but loose assembled, so it can be later inspected and greased every few decades. A few of my gaskets are leather. So are my engine mount ends. The cores are rubber carved with a Stanley Sureform. Wooden blades is also a good thing. Culver is a USA all lady propsmith. When you paint your mill, please don't try spray cans. A brush is more durable and economical. Spare accessories is a must. Keep a measurements and work logbook. I'd stay away from anything but regular Prestone and distilled water. Leaded gas isn't necessary, anymore. It runs 700 hours between rebuilds. Bores can be nickel plated but never chrome plate a bore or wear surface. I changed my prop seal every 50 years, whether it needs it or not, and the J&J Airparts lady was howling with laughter. A cooler thermostat is possible if you don't run it in the winter.
@johnb55199 ай бұрын
We tend to think that the engines of today are so advanced, but it's such a surprise to see the design of these engines from that time period. If only some of the motorcycle manufacturers used some of the innovations in these engines, they would still be around.
@FlightEngineering19 ай бұрын
True, it even has sodium cooled exhaust valves.
@Classickoolcars9 ай бұрын
Apparently the Halifax’s had really bad exhaust stubbers which used to glow like a beacon……. Night fighters used that to their advantage. 🤦♂️😢😢.
@michaeld97319 ай бұрын
This was a very interesting video. Good luck with the restoration and thanks for preserving a bit of history!
@cujet9 ай бұрын
This made me think of the Merlin crankshaft sitting in the hangar next door.
@johanndork53648 ай бұрын
Thanks for a great video and project. Dad was a Lancaster Sq/L and these always got him back.
@BLOWN8CYLINDER4 ай бұрын
Amazing condition, I'm more interested with it being from a Halifax... We have one at RAF Snaith museum however that sat upside down at the bottom of the Baltic sea for nearly 80 years ! Very interested in the exhaust ! Excellent video Peter 👍
@steveblottenberger10979 ай бұрын
Good job I'm with you on tearing it down and fixing it up restoring it that's my passion and hobby keep up the good work Steve from Annapolis Maryland
@249346378 ай бұрын
Oh wow! That engine is in incredibly good condition taking into account the age, and the fact that it's been crashed, and buried for many years. The thing that really surprised me as much as anything is that you said that it was full of really dirty black oil. I would have expected better maintenence from the RAF / RAAF / RCAF ground crews!
@Tera830749 ай бұрын
wow, i'm so happy to see this engine in capable hand, being restored. you say the crankshaft should have had a serial number stamped, but doesn't! Leading you to believe its been serviced and or rebuilt. i'm sure you would have told us if any of the other parts that also should have serials had them. But is there any hope that there are serials on anything else you haven't yet found? I can't help but feel the history would be so interesting, even more so if this is an engine that's gone thru rebuilds and possibly seen a long service. Given the location that it was found and the fact its rebuilt, possibly from spare/scavenged parts might that not also narrow down the number of airframes that it could have belonged to? I'm not british and english is like my third language so I could not hope to look thru RAF records, but if at all possible, finding the airframe and pilot of this airpale would be one incredible find. Good luck with the restoration and as a new subscriber i'll be enjoying your next episode with a good old cup of tea and biscuits!! Cheer's
@FlightEngineering19 ай бұрын
Thanks! I do have the engine seral number, but there is no database. I can only search through the aircraft records in London manually, and there were just over 6000 built. I hope to find out.
@DScottDuncan6 ай бұрын
Peter! Great find and you're the perfect finder for it! Looking forward to seeing it restored. DD
@neilmchardy90619 ай бұрын
I always knew you were mad peter. And seasons greetings brother. I’d love to visit you in your man cave sometime.
@FlightEngineering19 ай бұрын
Thanks Neil. The Man cave is more like a Man garage now I don`t run the business!
@fuzzjunky9 ай бұрын
i didn't know they were quad valve engines. mind blown
@andrewmacgregor87179 ай бұрын
Lucky man! Best wishes for a successful reconstruction!
@FlightEngineering19 ай бұрын
Thank you!
@ianburit37058 ай бұрын
I would love to be around when renovation has been completed, and it's got to that point where you push the start button, and, will it fire again. Thanks for the video, I`m now hooked.
@scheusselmensch57139 ай бұрын
Really good video with no unneeded words. I quite enjoyed the whole thing.
@christaylor49048 ай бұрын
You don’t seem to mention Non Destructive Testing ( NDT ) but very important with these engines !
@FlightEngineering18 ай бұрын
Yes, if it goes back in the air then most of the steel parts need NDT. At this stage it won`t be flying again or running high power, so I`m not doing any NDT, but I am doing the measurements.
@TheLRider8 ай бұрын
What a superb project. So interesting learning about engineering features from back in the 1930s/40s. That crankshaft is a work of art. Will follow definitely. Best thing to come out of Facebook ever 😂
@davapod7 ай бұрын
Crikey, I gave myself a pat on the back changing the oil/filter and plugs on my Honda Civic. Fantastic stuff, I have subscribed 👍
@lukebrennan57808 ай бұрын
RRHT have a cracking good book on the Merlin in the Halifax. The installation by HP was urm.. sub-optimal.
@FlightEngineering18 ай бұрын
That`s right. I think the thrust line was different to the Hercules powered variant, which caused handling issues. The bearers were also (unusually) bolted together and not welded.
@hoedemakerbart9 ай бұрын
Well you have acces to many parts, for us mortals it would be useless, a static display only 😂. Nice job.. im curious to the end result 👍😉
@anthonyxuereb7929 ай бұрын
Maybe it was upside down because it sat better (and safer), it would have been rather awkward to put it rightside up without a stand propped up by the supercharger and ancillary bits and piece, it seems logical to me anyway
@lowfatedes8 ай бұрын
Aluminium doesn't 'corrode' like steel. The surface oxides instantaneously when in contact with oxygen, forming a thin, invisible, protective barrier against further corrosion.
@shotcreteplus9 ай бұрын
Hello from Canada. Great video and explanation.
@philipberry64779 ай бұрын
Exhaust looks like the engine is from a Halifax.
@FlightEngineering19 ай бұрын
Correct!
@ianlee4878 ай бұрын
I'll be honest I could listen to you all day very interesting and clever guy.
@davidforster86545 ай бұрын
This is very helpful...I'm attempting to aquire a crashed damaged unit for total restoration. I have a complete set of RR workshop manuals to assist. Watching your video is very interesting. My background is 50 years in marine/refrigeration engineering, so at 67 years, this a rather a pleasant challenge. I shall make contact with you if I can successfully 'aquire' this unit.
@Yonner6669 ай бұрын
The old wooden props, very early Merlin
@yogiguitar19 ай бұрын
nice 1 ! id love one of them merlins especially as this ones got history. id build it into a car or a boat
@nzsaltflatsracer80549 ай бұрын
7:32 That's interesting, I've never seen inside a Merlin before. The opposite cylinders are in line so the inside rod bearing runs on the outside of the outer rod bearing & that rod is 5 pieces. Was that a common setup on aircraft "V" engines back then?
@patrickshaw85959 ай бұрын
Yes. Harley V-Twins and Allison V-1710s also used "fork-and-blade" connecting rods. Griffons used one "standard" rod with a gudgeon for a "link rod" to move two pistons with one crank rod journal. Of course nearly all radial engines used a "master rod" with many link-rods attatched to it.
@FlightEngineering19 ай бұрын
Yes, absolutely right. As below, the Allison V-1710, plus all the other Rolls-Royce V12s except some experimental models. The German V12s used a slightly different idea with a common bush supporting both rods, and some Russian engines used a master rod and slave rod with a wrist pin at both ends.
@smplyizzy9 ай бұрын
I thought if an engine like that was to be used in an aircraft it would need to have a log book created and signed off on by an engine specialist? In that light, the components would need to go through a recertification process. No?
@FlightEngineering19 ай бұрын
I am that engine specialist, but this isn`t going back in the air, mainly because it is an early engine for which there isn`t the demand. Nothing on a Merlin is "lifed", ie, you don`t have to have a record of how many hours it has done, you can pass all parts on condition, by visual inspection, measurement and x-ray flaw detection (NDT). Quite a lot of this engine could fly again, but not all of it.
@Steviegtr529 ай бұрын
Sounds like it will be a good engine eventually. This popped up on my youtube, I think because i had watched Lottie the tank whisperer over in Aus i think. She is building one up now. Merry Christmas.
@FlightEngineering19 ай бұрын
Thanks, I`ve watched her videos too, a lot of knowledge there.
@helenfinchsewwrite9 ай бұрын
Great video ,slightly jealous makes our one litre mini engine that we’re working on at present pale into insignificance.Our youngest is always on about getting a big engine maybe we might start looking . Merry Christmas
@FlightEngineering19 ай бұрын
Go for it! The great thing with any engine you have worked on is when it comes to life, mini or ocean liner!
@soysantiagoraul9 ай бұрын
That is true love for mechanics and engineering! Cheers from Argentina
@garypeatling79279 ай бұрын
Magnificent information, did wonder if it had cold start injectors
@FlightEngineering19 ай бұрын
Not cold start, but it does have injectors to help the engine pick up because the carburettor is a long way from the cylinders.
@djdefaut68699 ай бұрын
Guy Martin would love that engine .
@FlightEngineering19 ай бұрын
He would, in fact he already has one which I built😎
@jukeseyable9 ай бұрын
beautiful engineering
@williambarry80159 ай бұрын
If you got a ground running Merlin then you know what the heck you're doing.
@jamesdeath34779 ай бұрын
Excellent stuff! Always enjoy these.
@blackericdenice9 ай бұрын
9:40 maybe if it had an oil filter. It would look cleaner inside.
@pauljanssen75949 ай бұрын
Wow looks like an engine run hard without service was that one of the units used in getting the food shipped into Berlin after the war was over.
@FlightEngineering19 ай бұрын
That`s a good question. I don`t have any history, but I am going to try and trace it using the engine number with the RAF Museum library.
@mikewilson6319 ай бұрын
This is the second Merlin/Meteor crank I've seen that I thought was quite grotty and needing refurbishment but the owner was happy to reinstall. Yours appears less grotty than the previous one but that may be down to video quality. The previous one had clear corrosion pits in the bearing surfaces. When you make the installation video, would you be so kind as to be specific about why you think it is acceptable to refit this instead of having it reground. My experience is with smaller, more highly stressed engines and I wonder if that is the cause of our difference of opinion. Interesting that the oil filtration was so primitive on Merlins.
@FlightEngineering19 ай бұрын
The finish on these journals is ok, they are discoloured. As a non-flight engine, it can go, but to return to flight it would need to be lapped, or possibly reground, yes.
@mikewilson6318 ай бұрын
@@FlightEngineering1 Many thanks.
@matts_shed8 ай бұрын
Great video. Thanks for sharing.
@markclifton149 ай бұрын
That engine looks in great condition considering it was crashed and sat in a peat bog. Can’t wait to see the progress on it. Just a quick question. Would that engine after you have restored it be considered airworthy. 👍
@FlightEngineering19 ай бұрын
Thanks Mark. No, it won`t be airworthy. Large parts of it would definitely go again, but there isn`t a demand for these early marks of merlin for flight use.
@michaelisola63288 ай бұрын
Are there any new parts available such as rings,bearings,valves etc. ? Great video love these old engines!
@FlightEngineering18 ай бұрын
Yes, there are parts around. They made 168,000 engines and a lot of spares survived. Not so easy to get here in the UK now though.
@anthonygregory30229 ай бұрын
What an amazing thing to be able to do.
@bake1629 ай бұрын
Makes me wonder what you do about parts, like gasket sets and rod bearings, piston rings etc
@monsieurcommissaire16289 ай бұрын
In England, everything can be fabricated.
@FlightEngineering19 ай бұрын
We can still get parts for it. Gaskets are new manufacture. There is no head gasket on these, just metal to metal and rubber seals.
@kkuenzel568 ай бұрын
That is magnificent! Where can you find gaskets and seals for this engine? What methods do you use to clean the components?
@christophergould36739 ай бұрын
Isn't there any engine numbers that can be traced to were it was made, and possibly follow a old paper trail
@FlightEngineering19 ай бұрын
I do have the number but there`s no database to link it to an airframe. I can go through the aircraft log cards in London but there were over 6000 Halifaxes made.