I Bought a RUINED Piece of Gibson History | 1978 Gibson "The SG" Original Prototype

🟢My Website: www.troglysguitarshow.com
🔴Reverb: tidd.ly/4aFiyhC
❓Private Help Sessions: troglysguitarshow.com/help-ap...
⚫Amazon: www.amazon.com/Zither-Wooden-...
🍭Shop Sweetwater + Support the Show ➡️ imp.i114863.net/trogly
I bought a ruined piece of Gibson history for far too much money - but when it comes to 70s prototypes of popular models... you kind of have to take what you can get! This is the "The SG" Prototype that someone routed for a Kahler!
🐕 Episode Guide:
0:00 - Intro - Check Links in the Description
0:13 - Gibson's Budget Guitar History
1:20 - Unboxing
2:12 - Why You Would Buy a The SG
3:30 - Coil Split Switch? & The Paul Prototype
4:24 - Inside Look / Specs
17:10 - Clean Tones
19:18 - Dirty Tones
21:48 - Final Thoughts
23:02 - What to Watch Next!
🎞️ Videos Mentioned:
0:50 1979 Gibson The Paul
• What Les Paul Should Y...
1:04 2019 Gibson "The Paul" 40th Anniversary Reissue Walnut
• Does It Live Up to the...
1:08 1980 Gibson "The SG" Walnut
• Why Would ANYONE Buy T...
1:12 1980 Gibson Firebrand 335-S Standard Maple
• Remember That SOLID BO...
5:01 2008 Les Paul Super Custom
• UPS RUINED a Dream Gui...
8:51 1977 Gibson Les Paul Artisan
• 1977 Gibson Les Paul A...
9:12 1962 Gibson Les Paul SG Standard Ebony Block
• Buying a 1962 Gibson L...
❓Private Help Sessions ➡️ troglysguitarshow.com/help-ap...
💰New to Reverb? Get $10 on Me ➡️ reverb.grsm.io/earn10
🍭Shop Sweetwater + Support the Show ➡️ sweetwater.sjv.io/x90ZDO
👕 Merch: www.teepublic.com/stores/trog...
🥇 Patreon ➡️ / trogly
📘 Facebook ➡️ / troglys
📸 Instagram ➡️ / troglys
🟢My Website: www.troglysguitarshow.com
🔥 TikTok: / troglys
🛒 Current Inventory ➡️ reverb.grsm.io/CurrentInventory (also on website)
✉️ Email for Business Inquiries ➡️ [e-mail]
❓Guitar Questions ➡️ troglysguitarshow.com/help-ap...
⚙️ Gear Used to Make the Show: (AFFILIATE LINKS)
Guitar + Recording:
George L's Guitar Lead: ebay - goo.gl/6SjCeG
Shure SM57 (Amp Cab Mic): ebay - goo.gl/JK9bAC
Audio Interface - Roland Duo Capture EX - amazon - amzn.to/2tkIBed
+ Universal Audio Apollo Twin: amazon - amzn.to/2uYeeKN
Headphones: Focal Listen Professional: amazon - amzn.to/2tonXtI
Rode Videomic Go (backup audio): amazon - amzn.to/2vHNzm5
Lens: Lumix 12-35mm : ebay - goo.gl/NP6dQd
Computer: Mac Pro 2013 - amazon - amzn.to/37L9eb4
Editing Software: Final Cut Pro X - ebay - goo.gl/oiU3L2
American DJ Eco UV Bar Plus Blacklight: ebay - goo.gl/1E4ELt
Camera:
Panasonic Lumix GH-4: amazon - amzn.to/2Se3akM
Camera Gimbal: amazon - amzn.to/38KxYk9
Camera Slider: amazon - amzn.to/3bTIXK1
Rode NTG-2 (vocal + room mic): amazon - amzn.to/2UjxmxA
Affiliate Links are found in this description + comments section - clicking and purchasing items from partners will help financially support the show.

[@Trog]

What is the coolest vintage prototype that you've seen? ❓Private Help Sessions: troglysguitarshow.com/help-appraisals/ 🟢My Website: www.troglysguitarshow.com 🔴Reverb: reverb.com/shop/troglys?_aid=growsumo&gs_partner=Trogly

[@jeromestevenfaigin6059]

Luthier are like happy kids and they want to showoff their skills, I like the Canadian Luthier he could blend the block to close to it's color.

[@clarkbabin9799]

Was thinking that you could fill that area in by the bridge and do your own ebony block. And then you said it. Just looked up the Songbird museum and its definitely a destination I'd like to make. But don't know why they are in Chattanooga instead of Nashville or Kalamazoo.

[@clarkbabin9799]

Most of them after market Kahlers and other trem systems I've seen were always set up to deep. Compared with a guitar that it was installed at the factory you can see the difference in height.

[@mattyburrows9059]

Slashes..must be good coz Gibson sell copies of his copy

[@mattyburrows9059]

​@@jeromestevenfaigin6059 so why hasn't the luthier fixed the same problems they've had for decades..angle on the headstock.make it less.the weak neck.multi laminate it and have it straight through like a bass

[@peejay6930]

It wasn't a "crazy modifier" it was a "guitar player" 🙂

[@vmann-jd5yw]

Agreed, not "some bonehead". It was a cheap Gibson at the time and not a "piece of history" The real boneheads are the idiots who spend half a million dollars for a guitar when anyone can spend one percent of that for superior playing instrument with finish that doesn't fade or crack and a headstock that won't break if we look at it incorrectly.

[@russellmorgan5611]

Is it just me or did anyone else notice, the trem didn't actually affect the performance of the guitar despite the criticisms ?

[@stewartross13]

@@vmann-jd5ywTrogly continuing to boot lick Gibson into oblivion and calling players and people who make player-friendly modifications “ruining” and “crazy modifiers”

[@jsnowdendavies]

@@russellmorgan5611there were always stories of 80's trems sucking tone - this one sounded just fine and it seemed to do all the whammy dives and soars just like it should. I'd love an SG with a stud-mount Kahler!

[@devilsguitaristmusic]

​@vmann0207 The real boneheads are the ones that care about how much others spend on guitars or what guitars others have.

[@mykehutchings]

Who would’ve thought that somebody would take a guitar that sounds and plays amazingly well and actually play it - making it into the tool that they needed to express themselves…

[@larrydj549]

Hes a collector. He just wants to take them all and lock them away forever😂😂😂

[@emdeel5709]

@@larrydj549 or sell them on with a massive profit and drive up the price with hype

[@seanwoodburn2616]

A lot of us were looking at those guitars as kids trying to get that first Les Paul. Keep in mind that the $200.00 difference now is nearly $1000.00, so it was a fairly significant difference for the target market. The Les Paul Standard listed at $749.00 The Paul listed at 529.00 so for a kid it was definitely more approachable. A very cool slice of history.

[@frankwebster9110]

Back when you could get a pack of smokes and a gallon of gas for just under 2 bucks...

[@timscarrow9151]

Got my LP in '82 used for 675.00. Got rid of a KILLER SG custom to get it though. Thank you Dad, I miss you.

[@cataclysmicconverter]

Hey, don't feel bad, the Mod shop ruins 'em all the time!

[@frankwebster9110]

Yeah but, they are officially ruined lol

[@TylerJohnstonGuitar]

@@frankwebster9110 Authentically ruined

[@wesleyalan9179]

@@TylerJohnstonGuitar Lol😆

[@WackyT08]

Not ruined. It's a working person's guitar, not a "garage queen". If only it could tell it's stories.

[@acoffeewithsatan]

Yeah, this wouldn’t have been a particularly valuable nor sought after model for quite some time, more of an affordable guitar of the time. Its player enjoyed it but thought it lacked some extra features and so it was more reasonable to have it modded than sold to fund another purchase.

[@derangedhermit2879]

It has a misaligned Khaler bridge improperly installed, to where it’s fully bottomed out with jacked up high action, it’s basically ruined as a workhorse main guitar, at best it could be relegated to a slide guitar with its high action…8)

[@jonathanhudak2059]

WackyT08 but whoever installed it did a hack job of it so in a sense they did kind of ruin it

[@brunswicksquaremusic5905]

People who work don’t want trash guitars either.

[@matthewajello1299]

I’m so sick of collectors like you shaming guys who modify bottom of the barrel guitars to suit their needs, guitars are meant to be played especially inexpensive ones like a the Paul or the sg, guitars are like people, they have stories and history and scars, they reflect their player. it’s not destroyed cuz someone put a kahler on it, just love it and play it as is and don’t hold a grudge against the guy who had it modified

[@jonathanhudak2059]

Its only because its rarity as a PROTOTYPE

[@WilliamHaisch]

You could fill the hole and route the top with a center channel, inlay a strip of figured maple so it looks like an *inverse spotlight special* 😂

[@brandonjackson5865]

I actually think the Kahler looks pretty cool on it, I’d leave it alone and play it. It’s already a player anyway. I don’t think anything unless you wanted to paint it , filling it wouldn’t look as cool as the Kahler in my opinion. I normally don’t like SGs but that one is pretty awesome looking to me.

[@timscarrow9151]

They just don't play or intonate well, Mine is filled a has a Bigsby now.

[@brandonjackson5865]

@@timscarrow9151 I’ve never fooled with a Kahler much but I’d imagine a bigsby would be a whole different kind of nightmare for me. I have really heavy hands and probably couldn’t keep one in tune even if I didn’t touch the bar.

[@timscarrow9151]

@@brandonjackson5865 I had to replace a falling bridge, and raised the bigsby off the body to decrease the angle, it works better than I thought, I also am ham-fisted.

[@brandonjackson5865]

@@timscarrow9151 cool yeah I guess with the right angle across the bridge and good bridge slots and a nice nut a bigsby could probably be about as stable as any other non locking tremolo and they look really cool on some guitars too . Surprisingly I really love the way that flying Vs look with bigsbys on them. About the only trem I’ve ever had luck with is my old RG550 with an edge lo pro on it and as long as it’s set up correctly it’s rock solid reliable, I’ve been messing with a Wilkinson fender style trem I put on my Baretta special I got because I always wanted a single PU super Strat and even though I’ve got locking gotoh tuners and a graph tech nut my high e string won’t return to pitch and I see all these guys on you tube able to get theirs with supposedly stock hardware to return to pitch every time, but I think they all have to dump the bar or pull up to reset their standard trems to return to pitch. I’m stubborn and if they can do it why can’t I lol ? Even though I rarely use a bar except for just messing around anyway. I’m mechanical minded and can look at the parts and think ok this should all work but it doesn’t always and it can drive me mad if I let it. The older I get the more picky I am about intonation and fret buzzes and rattles , stuff that used to not bother me a lot, really annoys me being just a little off. You know ? Get off my lawn so I can yell at the clouds and shit ? I’ve always thought Kahlers looked cool on certain guitars too like the bigsby in a steam punk kinda way, I want to try something with an ever tune but I haven’t had the chance yet it sounds like it would solve most of my annoyances but I think evertunes are ugly so who knows, guitarists we’re a fickle picky bunch

[@watchtheskies]

The surface mounted Kerry King signature Kahler solved all of the issues that I had with earlier Kahlers, Kerry must have requested a lot of changes for his signature model, it is so much better engineered than other Kahlers

[@gregj.gotham4402]

A dear friend now gone purchased a Firebrand Les Paul burned in Gibson headstock plus the chainsaw case. Man I loved that guitar of his, he paid a total of 480.00 used plus tax in 1983-84 the guitar was made in 1982.

[@dougwilson8489]

Personally I love kahlers, I think that they are better and easier to install than a floyd rose. I don't get why everyone hates them.

[@crilf5830]

Lack of intelligence doesn’t help. Kahler made/makes great products. I would prefer a proper install or the guitar to be made with a Kahler flat mount in mind. Les Pauls should never have a Floyd but I’ll accept a Kahler.

[@ICantStopMakingNoise]

Before I knew anything about guitars - before I even really knew how to play - my first guitar was a 1979 "The SG". One of my uncles had left it in his childhood bedroom at my grandparents' house for decades, and my grandfather just let me have it one day. I owned it for about a year before I had to give it back to avoid family drama, and I've been telling myself I should get another, for years. Anyway, I was stoked to see you cover this one.

[@wesleyalan9179]

Dang, would've been cool if you could've kept it😑

[@greendaykerplunk]

@@wesleyalan9179 probably was cooler not fighting with his family lol

[@wesleyalan9179]

@@greendaykerplunk I'm sure that's a fact,lol😄

[@jonathanhudak2059]

Cool story too bad they just didn't let you keep it

[@user-gr6tl5xh6t]

@@greendaykerplunk guitar wont leave you family will

[@theabguitarshow1747]

I had the chance to buy this exact guitar down near Philly and the seller never messaged me back on marketplace. We came to a price, figured out a meeting time and then when I messaged him that I was on my way, NOTHING! This stings to watch this one. Could’ve had it for $500!!

[@leokrissandy5579]

definitely not ruined, just a guitar player mod it to suits his needs

[@Buffrt66]

You have to remember these were the budget guitar when they were new. Some people bought them to build their own model. That is fun you know?

[@alfsmith4936]

No.. Fun is buying guitars from desperate Reverb sellers, making the same video as last week and selling them to KZbin fans.

[@chip9177]

You have to leave it as it is. It is telling a story. Trying to hide the mods would almost seem like a lie.

[@jameshughes6049]

Evening all!! I just ordered a Gibson SG Standard in Heritage Cherry today. My first SG!! It'll be here tomorrow.

[@raytorvalds3699]

Congrats! That is very exciting!

[@jameshughes6049]

@@raytorvalds3699 Thank you.

[@jonathanhudak2059]

Howdy James congratulations!! 👏 my 94' SG Standard in heritage cherry was my first "good" electric guitar and my first Gibson, love it and still have it 29 years later. Enjoy your new axe!

[@frankwebster9110]

The ebony block with some cool inlay wood be a perfect way to restore some dignity to that old rocker. I love the sounds of it!

[@borasmussen4794]

I absolutely love my 79’ The SG! Now I know what the holes in the headstock were from lol! Someone had a locking mechanism above the nut. Mine still has factory pickups and electronics and tuners. I had to replace the bridge and tailpiece with a klusson harmonica bridge and tailpiece. Awesome guitars!!!

[@strat0871]

I like it, even with a Kahler, which is a good system, except for the garbage locking nut. Sounds good too.

[@jaydenstramel562]

Throw an evertune on it and just use it as a player

[@justin3947]

I’ve modified my guitars doesn’t mean they’re ruined it means they’re mine.

[@jonlennon3348]

The neck is walnut but it is quarter sawn to expose different grain.

[@alexandriashannon7438]

Take it to a luthier, they can do wonders with filling the hole putting it back.

[@hardac7943]

I would leave it be as someone who mods an change things it was someone's pride and joy. As it will end up in a display case it shows the history of players too. Even if it wasn't done the best it tells the best story as is.

[@justanish6966]

I actually ENJOY the floating trem on this... keeps it in tune also.

[@stevengrimes8737]

One of my big gear regrets was trading off my 1983 "The SG" in Electric Blue. I saw it again about 12 years later, and the next owner abused it terribly. The headstock had been broken and poorly repaired, and the body was severely cracking on both side of the neck joint. i plugged it in , and it still sounded amazing, but it was so sad to see the condition it was in.

[@therabbitcanada]

I've filled in routes like that no problem. Flush off the edges straight, route out the small area bigger to make it totally square, bring the guitar with me to wood dealer, match it then cut, glue etc

[@Shiznitt_]

Walnut has some of the nicest wood grain. The kahler should stay/upgraded as part of its history.

[@harrisonandrew]

Just after I left school in the late 1970’s, I worked in a music store selling guitars. I always thought that the Gibson guitars like The SG, The Paul and those bolt-on’s you showed were complete planks. I hated them. I was fine with the Gibson Les Pauls and Semi-Acoustics - they were playable. However I felt the Japanese guitars always came in set up way better and were the ones I’d pick up to play when the store was quiet. Obviously I was young and inexperienced but I knew what I liked. Having said that, I bought a Fender Stratocaster and a 25/50 Les Paul (Ebony) from the wages I earned at that store.

[@chuckburns9900]

What would it look like under black light?

[@rindred]

If you decide to get that ebony block inserted to fill that gap, get them to model the SG block you showed in the video, and have a MOP inlay that says "The SG" like the severed truss rod cover. Then you could a shim for the nut rout in the headstock and just put a period-correct SG cover on it, since you'll have the name on the body.

[@metalextras]

Perhaps that Kahler block make it sounds even more heavy!

[@chadwcmichael]

I’ve painted wood grain before. If it were my guitar and it was time and money, I’d be ok tackling that…but it isn’t so I won’t. There are all kinds of tips and tricks though, it wouldn’t be that hard to fake it to “factory”.

[@zoinkiezz]

The kahler may be helping to counteract some neck-dive

[@jonlennon3348]

I think if you refinished it a good luthier could mat a piece of walnut to fill the hole and he could make the screw holes on the head stock.The older fella at stew mac could do it.

[@Wargasm54]

I don’t get the kahler hate? Kahlers are cool. And they lock to hardtails if you don’t want to use the whammy.

[@ringsystemmusic]

It’s more the “modification of a guitar nerds on the internet deem important” with this episode.

[@timscarrow9151]

From firsthand experience, Kahler craze was 1983, the output jack is a replacement, and the neck wear looks right, I have worn mine that much twice now.Mine also has nice fretboard gouges from wear .

[@stewsim]

Adjust the little screws beneath the levers for proper locking…

[@johnnyennis9864]

It was clearly a player's guitar and they never intended it to be a "collector piece". The modifications show this was likely completed in the hotrod era, and fit what was common at the time. I think it's an excellent representation of guitar culture at the time, and it shows how guitars are tools for a lot of musicians, and not meant to be in museums.

[@donbuttaccio4464]

What is the name of the band & song for the riffage at time stamp 19:42, I hear it often on guitar sound testing here.

[@SteveOuimette]

My first "real" guitar was a Gibson "The SG". Fantastic guitar for a first guitar but I'm not too sure I'd feel the same about it today. Would love to try one again to see.

[@Dokkensound]

I had a late '70's SG standard in the brown finish. I did some extreme string bending and added a cam lock nut like that with a tp6 tail piece. I just put the truss cover in the case. Didn't consider it ruined and never planned to sell it. Ended up being stolen or I'd still be playing it.

[@robertwittjr1198]

yes it would be hard to match the wood, but it could be done. stewmac channel - Patching a Big Hole in a ’53 Telecaster; an apprentice went after it with a dull beaver to install a bigsby vibrato...dan did an awsome job making it "normal" again. great find.

[@roopher2]

I have one of these that I bought new in '79. It's completely stock but mine has the wide harmonica style bridge.

[@robpaige2376]

I'd be interested to know more about the proportions, given that there's no tenon cover and the neck butts up to the neck pickup. Is it the same body length as a regular SG? It just struck me as odd, as the only time I've seen an SG without a tenon cover is when they've had bolt-on necks.

[@robempire]

You should look up an acquaintance of mine named Dave petillo in new jersey. One of the best Luthiers in the game. Dude is a wizard when it comes to guitar repairs. Check him out for sure if needing any major guitar repairs. He may be able to actually hide that cut out on the bridge.

[@brian770]

wish they would have kept the jack on the side like this one, its the only reason i never bought a SG, hate the front jack look.

[@loudguitars69]

What is so wrong with Khaler trees? I had one on a Aria Pro II RS Knight Warior and loved it!!!

[@chrisghiardi117]

Sounds great especially considering the mod. You could pull the behind the nut lock for locking Grovers. The key with Kahlers was keeping the roller saddles clean and moving and enough down pressure on those saddles. Also the many adjustments could be a mystery.

[@Maxreverse]

Sounds awesome. Great find.

[@joermnyc]

The Output jacks on the production run are “deep panel” jacks. It’s a smaller hole than any other jack, so that might have been a cost saving choice.

[@scottgiering2015]

Trig- I owned an early 80’s firebrand SG and it had a finish called- antique mahogany/walnut. I can’t remember if it was mahogany or walnut but it did have dozens and dozens of what looked to be small tack marks like someone shook it around in a box to give it a relic look. Would you think this would’ve been the first case of a relic guitar by Gibson or even Fender. . .very interesting question you should look into that finish ,thanks

[@mangaaxis]

I can see why you could think it's mahogany, but if the camera is showing right, that's totally a walnut neck.

[@Trenchhhj]

why did he cut the truss rod cover? 😭

[@doomgoon2755]

id laminate walnut and ebony ,hit it with the router all the way up too the neck tendon and place the laminated strip in , route for pickups also filling the hole and run the og bridge setup. neck through ish..

[@meining-mech4378]

Always enjoy SG type guitars. The ebony block idea sounds like it would work out nicely for hiding that awful pit for the Khaler.

[@HelterSkelter199]

I would have the hole filled, repairing a kahler route in an SG is well inside most good luthiers wheel houses. If it were me I'd just do an honest repair, neither mix/matching woods or "faking" a invisible repair.

[@jaklcide]

Kahler FTW

[@jeromestevenfaigin6059]

Again - this can be restored to a point maybe a line will show the lose pin is a dowl incert and recorded to set the pin tied.

[@shfla7293]

$500 in 1978 is equivalent to about $2,307.06 today… so much for a “budget” guitar

[@brycebryson9657]

Would be dope to rout like a small bit out of the top to form a line from bridge pickup to the rear. Then put wood veneer/piece in to make it look like a racing stripe or something

[@kollabrock]

I own a -79 "The SG" that the previous owner bought new (1979). I got it maybe 1995, the pickups had been replaced at some point and the frets were totally worn out, so I had it refretted the following year+a new nut. When Gibson released the Burstbucker-pups I put a #3 in the bridge and a #2 in the neck, and I still play it just like that in 2023. It sounds great and actually stays in tune as well, a real no-nonsense workhorse of an instrument

[@viperBSG]

send it to StewMac! They'd fill in the Gouge and look almost original.

[@Gordanovich02]

I think I'd be tempted to try and wedge the Kahler and just use it as a fine tuning fixed bridge. Ditch the Rube Goldberg locknut and source a new trussrod cover.

[@jasonwaltrowski2315]

Just think if someone put a Floyd on it, the guitar would have a nice big route in the back as well

[@jonm1544]

Everyone says that the zebra The SG bridge pickup is a T-Top but I believe it’s a Velvet Brick. If you A/B it against a T-Top, it’s not the same. The Velvet brick is still a great pickup but it sounds more compressed to my ear. Open to other opinions.

[@houseomiller]

A really good luthier like Dan Erlewine over at StewMac, which is pretty near you, can make those patches in such a way that it's nearly invisible, especially under the bridge and tailpiece, and under the truss rod cover. As the honest seller that you are, I don't think it would bring back any lost value, but it would look a helluva lot better.

[@leahcaudill6559]

I bought,a LPJ for 600. No binding, just basic wood, it's a 2013. The good thing about it,is it's got the 490&498 pup's

[@steveparish9210]

Can't the Kahler trem be removed and brought back to stock speck?

[@JohnnyZnuff1]

Restore it!

[@jimilee459]

I love that series. I have a 79 The Paul that’s still one of my go to guitars.

[@user-ql1pc7pi9x]

Really good pickups. They had a nice bite to them.

[@reno145]

That is far from ruined. Lose the locking nut, throw on some locking tuners, set it up and rock on. Just lose the trem arm.

[@jeromestevenfaigin6059]

All that is not hard to fix pretty close depending on the Luthier you can trust.

[@dimitardimitrov1173]

What did he use to clean the tar off?

[@cataclysmicconverter]

It will chug!

[@saltpeter7429]

We'll have to get Ola to weigh in on this one.

[@jonnyhafer7376]

my band mate the one who traded you the original silverburst for the r9 has a super clean the sg he swapped the pickups but still has the t tops. when we played in a differnet band 20 years ago he had he SG and I had The Paul

[@Xaltar_]

Easy enough to restore, a nice well matched chunk of walnut and a competent luthier could bring it back to stock with minimal evidence of it's alterations. I only say this because it's a prototype, otherwise I would leave it be as part of it's history. I miss the days when something like this (non prototype) could be had for next to nothing and actually be enjoyed by players rather than be over priced collector fodder. Guitars I used to see sell for $400 - $600 now sell for anywhere up to 10x that.

[@petercappiello8192]

The Firebrands were junk guitars.I sold them when they were new.Parents bought them for their kids for Christmas.We even got asked if we could paint them.

[@butchlauer]

In 1980 at 16 I bought my first Gibson. An SG firebrand that unfortunately had a decapitation about 3 months after I bought it. I got it fixed and gained a sweet black stinger on the neck. To my point, what is worse, a headstock break or a kahler rout? I'm gonna just leave that out there for everybody, but I would have dive bombing the shit outta mine if it was kahlered back then. Always loved the pickup switch and output jack locations also.

[@jimmyjames2022]

Nice find, the walnut SG prototype looks very sweet! Despite the questionable trem installation. Where is the neck tenon, I couldn't see it? Back of that neck looks sanded to me.

[@jw_au]

Great idea with the ebony block

[@zeusapollo8688]

I think you could fill that hole and even if it was not perfect it would be very hard to see under the strings

[@RoboSteave]

I love the walnut look and it sounds great. If I were you, I'd leave it alone and enjoy it for what it is.

[@JonWilde]

Late but is that the riff goodbye by sr-71? 19:41

[@mikeydep89]

i have a 79, got it with duncans in it, unfortunately not the original t tops

[@tonyy.8852]

What's wrong with kahler tho? Yes it does have a bad reputation, but still quite a lot of artists use it

[@Trog]

The vintage ones just aren't that good... I've had a modern kahler that was pretty nice though

[@jaspera6908]

social distortion at 18:50?

[@thebuck1152]

Twoodfrd could probably do the kahler delete. He does some amazing repairs on his channel! The best headstock repairs I've seen

[@brucejoaniewilliams3213]

Agreed, Ted does THE BEST guitar repair I have ever seen. His approach is thoughtful, his skills are amazing. And his history lessons and commentary make it all come together quite nicely. Check it out all of you!

[@thebuck1152]

@@brucejoaniewilliams3213 right! His old world skills and knowledge are mesmerizing to see in action

[@supedersen]

Drop the intro, please !!!

[@BlueSpirit.]

Sounds great! 😊 very full with detail.

[@CJMacNeil]

Wow! This thing rips! Very cool guitar 🤘🏻

[@p.aaronjones4174]

A fellow I know made that EXACT modification to a walnut Gibson SG just like that. I was there watching as he used a drill press to rout the trem chamber. Early 1980's. Could be. I don't recall how he handled the truss rod cover. Trying to find out now.

[@jonnyhafer7376]

i had a the Paul from 1978 with a khaler and the route looked identical to that i had it patched and put the regular stuff back on. makes me wonder did they ship with khalers or were they that popular to install back then

[@che2335]

❤ the Kahler

[@coreybagley5579]

Great sounding guitar

[@TM-ev2tc]

You need to check out Neil Young's guitar Old Black. A 53 Les Paul Gold Top that has been painted black.

[@cataclysmicconverter]

That ol' gal has been around the block a few times. An amazing guitar. I have a Deluxe with his setup, a Firebird pickup in the bridge with a P90 in the neck and it screams.

[@cuda426hemi]

Note the horns are hardly beveled at all - almost as flat as the no bevel '72-3 "Deluxe" SG w/2 scratch plates and embossed 'Gibson' chrome 'buckers and Bigsby. 🎸