i Bought a Yamaha JOG! Time to Make it FAST!

[@GodtJR]

No matter what you do, DO NOT change the engine on the jog. They come stock with the minarelli short block, which means the space from the front wheel to the back is very short. This makes it extremely easy to wheelie. Some cvt work and it's just powerwheelie with stock exhaust, carb and cylinder. With a 70cc it rides so smoothly. I had one a little while ago, it's on my channel if you wanna see how it looks, but that thing was just mint. If you change the engine it will be super hard to wheelie and half the fun if even.

[@okeyhehe1728]

Jogs especially the last gen two strokes are super common in new Zealand, only problem I have with jogs is that installing bigger carbs can be a bit of challenge due to room

[@MOPBOYZ]

i can def see that being an issue, it’s a tight fit for the carb!

[@knallerttuning-dk9666]

with a voca manifold and polini 28mm fits perfect!

[@Sommer2216]

yes as knallerttuning-dk9666 is saying it is possible, you can get a manifoldt to point the carb forward between your legs and then you can have a bigger one on. The yamaha jog is very popular in denmark@@MOPBOYZ

[@profile_gg8648]

i have have 19mm carb on my jog r

[@ThomasLea-c9m]

I used to have a keihin 30mm on my old jog with no fitment issues at all. With a little modification to the inlet something as big as a bing 36mm carb will fit in there too.

[@anrod185]

I had two jogs one blue and one black. I bought from a guy in FL. I just cleaned the carbs and they were so fun.

[@curtisventura8543]

just discovered your channel because im buying a jog in a couple weeks. perfect timing. cant wait to see what you do

[@MOPBOYZ]

heck yea man! good investment !

[@marino2039]

I really love the combination of black and purple on the jog, it maked it look mint.Keep up the good work.

[@jshumphress13]

It is worth it as an adult. As a 13 year old, I night a 1994 in the same colors for $400. LOVED that thing. If I could one local, I would buy it.

[@PrendeAlgo]

In Puerto Rico, in this condition the Yamaha Jog is valued almost at $5,000+. Right now One is selling near my workplace for $4,000. 😢 0 paperwork. It breaks my heart.

[@MOPBOYZ]

that’s insane!

[@Bikelife_boogs]

I’m a elite guy but love the jogs I’d suggest getting the polini 360 intake helps a lot with fitting the bigger carb in , also do zuma front end and maybe rear but horizontal motor can make some good numbers!! With little mods our 3kj is absolute ripper

[@alistairrobinson3865]

Sweeet looking bike!!! I just bought a totally original 2002 aerox liquid cooled with 3000 miles on for 700 British pounds in uk, im beyond stoked!!!

[@iain1970]

I had a Mk1 Japanese built Jog (1990) and tuning parts were unobtanium at the time. Loved it though, even with the pink seat.

[@Gkoikarper]

Full malossi Cilinder 70CC Vario + CLutch Springs rollers Carb min 21mm maybe higher ? deppending on the setup etc 70CC malossi exhaust

[@AZReal707]

I just bought a 1995 Yamaha Jog Today 800$ I'm Hella excited to learn and work on it

[@niklashansen5308]

Something you should do is getting the European handle shield and light housing headlight and turn light they are much nicer and pretty

[@The_Legaciez]

2fast 100 cc would be awesome too see on it, they run very well on Yamaha jog’s or if you wanna continue using 70cc’s try using Malossi 70cc MHR it also crazy with Yamaha. Once saw a 2 cylinder 100cc 2fast Yamaha Jog. But up to what you prefer! Mild or Wild is always what you personally like.

[@sub2mee842]

Dude i just Said that, my guy😂

[@The_Legaciez]

@@sub2mee842 Doesn’t really matter who said it first, I personally think Yamaha Jog’s are a great way to make a machine that can run very fast. But there is always the other mopeds of fx. Hiper Motors which are Piaggio Zip, Stalker, Nrg, Typhoon and many more. Those are the ones with most power within them.

[@sub2mee842]

@@The_Legaciez yea I agree but I just meant like we had the same idea

[@The_Legaciez]

@@sub2mee842 Fair, I think a lot of Europeans would say the same too.

[@heybusdrivah]

Lol I used to own this exact bike I traded it to a guy in Pahrump for a 93 honda z50. The story is, I bought it from the original owner in Ruidoso NM. It was sitting for years.. The old guy had it in a shed. He said his wife wrecked it and they never really road it again after that. Im happy to see it found a great owner! @MOPBOYZ

[@heybusdrivah]

Btw just picked up an all original 2000 yamaha zuma prebug

[@federalnoise]

I had one of these when living in Australia. It is still better than most of the mopeds today. It averaged 46mph top speed +- 15mph bearing in mind I weigh in heavy. It was a fun bike and very practical. Good luck with your purchase.

[@noahnorup4136]

100cc 2fast and make it water cooling then a c16 yasuni exaust and malossi rem. Then the rest Also needs to be upgraded. It Will go around 100 mph

[@kristoffereriksen2425]

i would say wild setup because yamaha jog's and pgo comet's are very light and easy to tune and that makes it very fun

[@kerm1t_z_fr0g18]

Would love nothing more than to see you go all out and make something like you haven't before so get the long stroke crank like a 45x90 and a 90 kit or 100fast and make an absolute beast out of that thing trust me will not be regretted

[@degenerateactual3080]

A good alternative to the Yamaha Aerox that was sold here in the United States is one of its competitors in the same class, Aprilia, SR50. Then, again, the Malaguti F12 is already super similar to the Yamaha Aerox, and would pretty much end up being the same bike.

[@Ercan_Sctrc]

Yes, I have an Sr50. Aerox and SR50 are quite similar in structure and engine

[@Imdzos]

I picked up a jog a few months back and it is so hard to find videos of them, can’t wait to see more jog videos

[@AJvelour]

Jogs are honestly such a good bike to have in general you can do so much to them

[@hidden_bread5570]

I found an elite for $650 in my area and was planning to buy it, I just sold something and was going to buy it. I honestly wanted to buy a new exhaust for it since the listing shows a massive dent in it. Hopefully it doesn’t have any major issues

[@preslavnikolov923]

Jogs are fun for stunts mine has 70cc ported kit exaust variator and new springs 21mm delorto carb whit malossi filter pod its good but you can also get a advanced key for the stator its made by tnt I think it advances the timing a little bit but makes it ride better

[@Joeyfordayz2301]

I understand you guys cant get ahold of scooters From other countries. But if at anytime, if you decide not to get an Aerox or a runner. Then you should get a gilera stalker. Cuz thats what i own and the motor is awesome. But I doubt if I would ever see that happen

[@Skullspiderscootersquad]

The jogs have a short case horizontal just required different belt then regular zuma horizontal

[@obeyrockillas885]

Gy6 boy here red honda ruckus 171cc big bore slammed love the vids bro!

[@middlesiderrider]

I have an '01 Honda Elite SR that I bought for $20 two years ago. It's hit mechanically but it has all the bodywork in decent shape. I've slowly been gathering the parts needed to fix it, but I'm broke so it's taking a while. The last thing I got was a TWH 48mm cylinder kit to replace the scored stocker. Hoping to get the scooter built this winter so it'll be ready for spring

[@MOPBOYZ]

awesome man, good luck with the build!

[@middlesiderrider]

@@MOPBOYZ thanks. I wonder if the Jog engine has factory trenched cases and angled reed block like the Vino? I've got a junk '03 Vino that I also bought for $20. The reed petals are way bigger than Zuma engines too

[@jbdoublewide8757]

fire. the jog and vino cases have a factory trrench done to the cases that the horizontal minarellis dont.

[@MOPBOYZ]

i didn’t know that!

[@volvo850r3]

Keep it stock man. I have a Malaguti Yeaterday. Same basic design as this. Oil tank infront and carb is mashed in there .

[@BoozySZN]

intro beat is goated.

[@MistaB44]

Perfect pick up scenario where it's worth paying a pretty penny. It's also the exact jog I've wanted since day 1. I've only had 1 chance to scoop one, and it got away from me. I'd say build it to be fast, and beat on some elites. For the giveaway I have an elite 😉

[@MOPBOYZ]

glad i didn’t let this one get away!

[@reecehignett95]

I have a gilera 180 in the uk does 90mph, wheels still at 60mph there so good, there worth 2500 pound to 3500 pounds here

[@viktorfriis07]

Nice Jog! but get a Jog as/fs headset for it. I think it fits right over, and it looks sooo much better

[@MOPBOYZ]

you need handlebars too but i def want to do that !

[@pk93cov]

My.opinion make the maliguti the fast bike and the jog another stunt build? Another jog be easier for you to get them maliguti, so maliguti clean and fast LC build

[@RCgarageTexas]

GY6 That needs a better clutch setup lol 50cc with 80cc top end 21mm carb high flow exhaust need to do a cam next but do not wanna bent the valves lol read about that a lot

[@raffinajarian7028]

I had 2 of these scooters 15 years ago there called jog artistic in my country and different light housing best scooters gd luck

[@xplay751]

That's hell of a score,I've been looking for one out my way

[@gavinjarvis8870]

Been watching you for I think at least 5 years now lovum

[@elibrooks5647]

Jog ftw. The 3kj is a good platform for a build. I got a jog aprio from Japan makes power easy you just need to get a aftermarket cdi to get past the rev limiter they have. Not sure if the us models are the same

[@YamaHondaGarage]

I’d just do a mild build on it since Jogs are getting harder and harder to find so just spend more money on the F12

[@evanharris584]

I just got an f12 but I’m having trouble finding parts for it in the us, any recommendations?

[@kerm1t_z_fr0g18]

@@evanharris584pedparts mate best place for all mopeds that are on there

[@jakeze36gang51]

Super clean jog I wanted to pick it up for when I come down to Vegas!

[@MOPBOYZ]

we gotta ride next time!

[@wedelsgarage9023]

You should really try and find Aprilia Sonic, they're awesome and they're minarelli too. Btw Yamaha jog are im my opinion one of the best stunt scooter

[@karlried9823]

You should track down one of the air cooled Piaggio 2 strokes that made it to the USA. I just snagged a 2005 Piaggio Typhoon I plan to build up. You could always find a 2 stroke Vespa and build one of those.

[@MOPBOYZ]

i had 2! derbi gp1 , water cooled piaggio hyper2 engine in them!

[@karlried9823]

You can easily swap a 125 2t case from a euro bike onto these. I'm looking at doing a 125 case swap and building it to 172 or 180cc like they have overseas@@MOPBOYZ

[@andyanders58]

Love the new ride. A,elitejog..hook that baby up Trevor. Can't wait. Old man mop

[@myntx6957]

Down where i live theyre atleast 2500$ used and basically new ones are about 4-6k

[@nicholashernandez1494]

Resto mod, clean upgrades but sticking to the original look

[@curtfox91]

Just got one to white same style put a 70cc bbk it rips so hard. Im never selling mine

[@spike_2112]

ive got a gy6. it has a 70 kit and polini variator, i was thinking clutch or carb next haha. love the vids man!!!

[@johnvanderbeek7535]

Dope ride my dude and if its not a wheely bike its gotta be a speed deamon! stoked to se what you do with it

[@MOPBOYZ]

exactly! thanks man!

[@JDATWAY]

we should be allowed to import them next year or so it will be 25yrs old next yea the aerox came out in 99 i think

[@mototommy5525]

If it uses the 1st gen horizontal engine it's gonna be fast when tuned! 1 of these was my 1st legal bike on the road, now I have 2 last gen jog rr liquid cooled

[@RVruckus]

Love the channel, been riding a ruckus but thinking about a pre bug. You guys are awesome.

[@MOPBOYZ]

def get a prebug!

[@MTHDMYNRD]

It be cool if you convert the head cover to jdm version of the jog but then you’ll probably lose that purple trim

[@cheythompson740]

Here in New Zealand we commonly get the jog, the really hard to find one is the CE50e jog

[@SchmityFPV]

Love the colors on the jogs, white ones are clean 👌🏽 (Elite)

[@marekszs]

i love those mini edits in every beginning. keep them they fire🔥🔥🔥

[@MOPBOYZ]

Appreciate it man!

[@pellegrnfeldt6748]

i have had around 30 jogs now and plz get an eu style headset for it. it looks so much better.

[@leimomikailio6739]

Wish I had a jog to mess with we rarely have um in hawaii, but love the stock style of it and it has many varieties of aftermarket parts for this bike a bit pricey but well worth it, nice bike man keep up the content

[@tjomg9354]

Finally , nobody on yt has good jog content

[@Santana442]

i have a honda elite ch80 but always wanted a yamaha jog!! clean pickup!!

[@nilsrsnr1077]

yes in germany parts for the jog are easy to find but i did not know that the US dont have the aerox

[@jonathankorsgaard5023]

Cool but i feel like you have to get another headset like from the jog As or Fs. And I have a Aprilia sonic which is the same motor and it is a fantastic wheelie bike. So I imagine it is kinda the same with the jog

[@benlarsen3416]

Your ability to acquire these units is savagery.

[@MOPBOYZ]

i spend a lot of time on offer up lol

[@Thats_Bogus]

Always with the A1 Content !, I got that GY6 Metruck Build

[@tobywaring9531]

Again the north east is where all these scoots are. On marketplace right now there are at least 30 jogs in NY, Boston area. There's an aprilla too

[@roccod.5688]

Im sure its gonna rip just like the others. Go for it. Have an elite.

[@MOPBOYZ]

can’t wait🤙🤙

[@jeremiahjohnson8092]

That's a sweet jog. I myself am looking for a white and purple jog. There hard to find. I would build it to be fast. Keep up the good work. I love your scooter channel.

[@MOPBOYZ]

thanks dude, good luck on your search!

[@joepje0318]

Hi, i heard u talk about maybe getting a yamaha aerox, im from the netherlands and i have one that u can have for free the engine is missing the carb and clutch but the plastics and everthing else is complete. And i am willing to cut the frame up for u and dissasemble it for u. It was my first scooter project so its pretty build already, not anything fancy tho but it had a dr70cc cilinder a malossi multivar and a pipe i even have some spare plastics.

[@jayrivera933]

Been wanting to get a job like that man that thing is pretty clean I’ve got a Honda sb50 AF16 on the way nice Build cooming!😅

[@seanbailey8545]

Love this Colour way, its so sick.

[@briannasmith6213]

Keep it original. As I have aged I have learned. The jog is a classic

[@isaiahkaid1627]

hell yeah stoked you got a jog! I got a honda elite 😀

[@melanci6745]

Thats a really beautiful Jog, congratulations ! I got one from the same year and colour, but the front, the rear lights and the panel are different from what we got here in Brazil, i find that really interesting. Also they are really popular for tunning here, we normally use a Yamaha RD135 carburator and the Malossi/Eurocilindro big block kit's. I'm anxious to see the development of your project, have a great time!

[@MOPBOYZ]

yea USA spec on taillights and headlights is always goofy on scooters! thanks dude!

[@melanci6745]

@@MOPBOYZ Here in Brazil a lot of people find the USA taillights and headlights more beautiful and not goody at all hahahaha

[@nflocplayz6424]

Super clean build, might have to pick up some merch 😏

[@SnakeVenomTV12191]

jogs are So fast dude, i love them. Mines around 120 pounds

[@danieldoyle253]

Can’t wait to get a scrape bar before Ferry 2 Ferry next year 🤘

[@xtayber6112]

Gi-Lera ( Gilera Runner ) not Galaria. And yeah they are the best or the best and they are very loved in the Netherlands, if u get your hands on one it will be sick

[@BondanHeru]

Try import 2000's matic scooter, yamaha mio 1st gen headlamp. It suit with body line

[@blueballs5150]

What’s a good budget scooter that is easy and cheap to upgrade?

[@matthewnorris203]

I like your shop - organized and all the tools you need there. Honda Elite

[@MOPBOYZ]

makes life easier when you got a bunch of projects for sure ! ahah

[@Jeevd08]

you can buikd the block a minarelli horiz just buy a frame and a new hood set and ur done

[@johantorne7362]

Try it with stage 6 mk2 Racing and a yasuni c16 and maybe a 24mm polini carb, that thing would be fast

[@MOPBOYZ]

that’d be sick!

[@idnman1259]

Best looking Honda jog i ever seen 😮

[@nicklasskanal3602]

ive got an yamaha jog AS.. but its so cool to see a jog on your channel, keep up the good work :)

[@Ottahhhh]

Would love to see an Aerox on the channel but didn’t realise how hard it was to get them over there damn man😢

[@aidan_berg7715]

Got a 94’ elite just finishing up refurbishing need that belt and that brake for my quick stroker elite 😂 Also built the jog my buddy’s got one they’re fun to build and a bunch of parts of ali express that work for it real fun to build 🤙🏽🤙🏽

[@mitchankrom3771]

Literally my dream bike please keep it for a while

[@MOPBOYZ]

that’s the plan dude!

[@punatario8794]

Can’t wait to see what you do to your jog. I have the same one in blue and gray.

[@Donbscooters757]

These are so cool i have wanted one These things for the longest time and yeah he's right hard to find and most time there in rough condition

[@pk93cov]

Build that jog bro they wicked ped builds

[@karimtv2]

its from a artistic special or a fine selection if you need those parts

[@topgeek2985]

Let’s gooo been waiting for this, wheelie build for sure ! Got one myself as well bro, I’ll send you some pics

[@anthonyclaudio5920]

I want to see a full level 10 build all the other brands have been done in usa u should do all level 10 parts it would be insane 2 fast is sick polini molossi but level 10 is just crazy for jogs and dio

[@Greve0512]

Do a stage 6 mk2 racing cylinder, a yasuni c21and 28mm carb on the JOG

[@w1ll911]

Get 4 grams rollers and it will powerwheelie completely stock

[@scooterbomb2152]

Excellent stuff. I have one of these as well waiting in line for a build, Same colour combat too. We got every model jog here in Australia except those weird posh ones with round noses.

[@MOPBOYZ]

awesome man, you have good taste hahah!

[@Camvba]

sick video man, awesome jog!

[@552racing]

Ive got a 90 2ja JDM import jog up here in canada best bet ive had for rare parts is yahoo auctions got a full new body panel set for $300cad

[@veldhuijzenscooters3086]

I have both a Peugeot v-click with a 150gy6 and a Honda elite both really fun bikes to drive but I use the elite to go to work and back and I lost my airfilter box a couple days back🥲