I bought an old Ford 1310 - was it worth it??

[@DomDoesMoms1]

Grew up driving this sitting on my great grandfathers lap as a little boy. This machine is a beautiful tractor no matter what condition. Id love to own one when i get older and settled down

[@charlesmurphy1510]

If your wife lets you buy it.

[@daylencrews19]

I bought a 1310 for $700 last year the tractor dealer quoted a lot to fix the Hydraulics but all I had to do was clean the hydraulic screen like you did and was able to turn around and make a nice profit off of it. They are good tractors put personally I believe it was just a tad underpowered and never really seemed to like the cold

[@99Projects]

That’s awesome man! They don’t like the cold, that’s for sure

[@Majestic-Gaming]

I do recommend getting the crossmember that goes directly in front of the grill for loader support if you haven’t done so yet. Find one or make one!

[@kirk467]

Your battery chainsaw is awesome, I bought a DeWalt saw and it’s been a great investment and light for me to handle! I’m selling my Husqavarna chainsaw! My DeWalt saw is only 12” but that’s all I need since I’ve retired, I only use it to trim branches and it’s perfect for that!

[@99Projects]

I love the battery saw. I don’t think I could sell my husky, it’s nice for bigger stuff but I grab the battery saw far more often

[@kirk467]

Thanks for sharing my friend! Kirk from Louisiana, sending prayers and positive energy your way! 🙏🏻🙏🏻🙏🏻👏🏻👏🏻👏🏻👌🏻👍🏻👍🏻🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

[@99Projects]

Thank you

[@frederickjeremy]

If you havent done so check the oil in the steering gear. Not sure about the 1310, yours should have power steering with the loader so they might not have this problem, but the 1210 with manual steering that has set outside will leak water past the steering wheel, through the steering colum and trash every almost unobtainable bearing in there. Forums recommend changing the oil out and filling it to the brim with john deer corn head grease. I just filled my new one up with red n tacky as i could not find corn head grease. Havent had a problem out of the new one, but that was almost the end of our 1210. It sat for a decade or so until i found a steering gear. All over a 2$ bearing ford discontinued in 1990for a 1986 tractor.

[@jda1961]

turn the key in opposite direction to heat up glowplugs, to make it start easier and the 1310 should be a 3 cylinder disel

[@99Projects]

Thats correct, i knew about the preheat, im not sure why i didnt use it

[@daylencrews19]

These tractors the glow plugs also run what cranking the engine over I believe

[@leemontoya8028]

it's probably a Shibaura K773

[@Cyclone74]

I love the blue color!!! Glad you got her running!!!

[@kirk467]

I love your dog, he’s a good boy!

[@316jd140]

I just ran across a 1300 for sale with a front blade and Woods mower. So I have been browsing youtube videos for some videos of the 1300 and ran across yours. Thanks for posting. I believe the 1310 replaced the 1300 in the Ford line, so I'm sure it would be a good example of what a 1300 would be.

[@99Projects]

They are great tractors, very useful. I’d recommend anyone get one

[@jeremiah-om7zl]

You definitely got the deal, I bought a Ford 3000 diesel and had to put all new rubber. Lines and tires. The cost of the tractor was $1800 the tires, well you know. More than what I paid 😂

[@99Projects]

that was an awesome tractor

[@jeremiah-om7zl]

@99Projects I had a ford 2000 gas also. It was slightly better

[@leemontoya8028]

Just bought a 86 1510 ford, Shibaura k773 4X4 it's got the front bucket three point grader blade, and I don't know what it's called it cut's weeds it's like 7'x7' as well! minimal rust hardly none everything works, big tread tires on the back! payed 1 Dollar.

[@ramper50]

id say you made an excellent trade...

[@kirk467]

I just hope you’re going to change the filters my friend, engine oil is the life of the engine!

[@kirk467]

I’m still catching up on your videos, this one is a year ago! Maybe you can find a three point grader blade for your tractor brother, you can tilt it to taper the road to drain the water to the ditches! Oh I see you have a box blade for your international tractor, what’s wrong with the international tractor?

[@alexlongoria3893]

Yes!!

[@MINItraktor196]

it was interesting to see 👍

[@iwantosavemoney]

Tire up grade would be in my future

[@EagleLakeWoodworking]

The 1310 doesn't have power steering, correct? How you find it operates using the loader with no power steering?

[@99Projects]

Honestly the only time I remembered it did not have power steering is when I’d be running across really rough ground in 4wd and the front end would just kinda pull the steering wheel around. It wasn’t really hard to steer it was just rough. I definitely prefer no power steering on this tractor. It’s one less thing to go wrong and you really wont notice it.

[@EagleLakeWoodworking]

@@99Projects thanks for the insight!

[@99Projects]

Yea absolutely

[@chrisboerman7470]

That filter was nasty!!!

[@99Projects]

I think that’s particularly why it was slow lol

[@chrisboerman7470]

@@99Projects yes sir!

[@theoutdoorsman3581]

Hi just came across your video where’d u get the hydrolic lines

[@99Projects]

Napa I think

[@Onemanstrash1]

you should make a bunch of shorts with your phone from your long content (dont worry , it keeps your long videos as well) , you have decent videos (long form , and the views) you will gain subscribers quickly and be able to monetize your channel. I have more subs , but less long form views. last month I had 198 subscribers, shorts have pushed that to almost 800 as of today. someday I will get where you are.

[@99Projects]

That’s good to know, I’m kinda on the fence about shorts I know there’s a benefit to growing the channel. I put a lot of work into these videos and I don’t want the channel to look cluttered, and take away from the content that takes a lot of work. I feel like shorts make the video page look cluttered, just my opinion.

[@99Projects]

Do the shorts show up on the video page on the PC? I just looked at your channel, it looks like there’s a separate tab for the shorts now?

[@Onemanstrash1]

@@99Projects my channel is a mess lmfao but they seem to be in their own spot. I should actually sort out and edit a bunch of my older videos . that one short I posted got me over 100 subs . It was from a video I took many years ago lol A few big channels seem to be doing shorts as well. I gonna go look at my mess lol

[@99Projects]

I’m not talking about your channel!! Lol I’m saying in general, I looked at your channel, it’s actually organized, the shorts are in their own spot, I like that. I made a short last night after looking at your channel, I’m going to give them a try

[@Onemanstrash1]

@@99Projects Lol , I was though , it is *my videos are unorganised . I saw your short. you will be shocked at what gets you views and subs in shorts ;-) fish cooking on a fire pit got 18000 views , +27 subscribers ;-)

[@dans1104]

So this is where things go to die

[@leemontoya8028]

What??

[@ritagalindo7721]

That's some nasty looking oil 😮

[@rodneybalog4605]

I don't think that tractor ever been serviced lol

[@99Projects]

Probably not. Which is crazy to me that people don’t take care of really expensive equipment with the excuse that it’s expensive and time consuming….so is broken down equipment Kyle