I BOUGHT the CHEAPEST Squat Rack on AMAZON I Could Find…

[@BasementBrandon]

I bought the same rack from walmart (Fuel Pureformance branding) for $109 a few months back. They had a bunch of different color options so of course I got white. Got this for a buddy who said he wanted to start training at home so gave him this rack, a bar, bench and about 250lbs of weights. I wouldn't use this rack myself but it's a great low cost option for someone who isn't sure if the home gym life is for them.

[@mrmike4228]

I have the same one, have had it for 2 years now. I use heavy 12 inch blocks to hold the back pins down. With a few plates on them. I also use this for my heavy bag. And trx work. I wouldnt do heavy lifts with it. But its nice for cold days when you wanna stay in. And its apartment sized.

[@JBS7551]

Brandon - Will you review the Pepin Fast Dumbbells?! When?

[@GarageGymReviews]

Agreed. It's a gateway drug to spending $100K+ on gym equipment. "Just give it a try..."

[@BasementBrandon]

@@JBS7551 I haven't received them yet. I believe they'll ship in December.

[@thomasbrogan9102]

I'm bingin Coop videos, And reading Basement Brandon Stories - It's LIKE WE'RE ALL BRO'S, Bro! #35's matter

[@jm0122]

finally something that the average joe may decide to buy, unlike that eleiko stuff that costs a fortune lol

[@Mysticbladegod]

Absolutely. I like seeing information about the budget equipment

[@freedomrings1420]

I bought a rack and bench off of Craigslist 2 miles from home ,100 dollars. The bench is great and I fabricated safety bars and modified the squat rack with bolts and steel I had laying around. Your muscles don't know how much money you spent unlike a woman.

[@MurphGymExperiment]

Walmart progear squat rack is the same specs as our fan fav fitness reality rack from Amazon but Walmart has it at $200. Don’t do cap

[@airgordo4]

Coop has like 2 video with Eleiko stuff lol

[@michaelderenne9838]

​@@airgordo4I think he just means that coop always reviews expensive stuff

[@Lechemilktea]

I’ve had it for three years and its been stored outside all 3 years. 0 complaints. Does the job 🤙🏽

[@praxton]

I used that as my starter squat stand. I was on a major budget at the time. Lasted several months and did its job. It did get to a point where I lost confidence in its stability. When you get over 200lbs squatting and it starts wobbling badly, you don't want to push your luck. It was likely fine, but I felt uneasy. Went up to a Rogue Monster Lite squat stand which I've been using for years now. If you're just starting out and on a budget, it does the job. Just be aware if you're consistent, you'll outgrow it in less than a year.

[@arteelol]

Do you think if you put it by a wall and but bars at the top into the wall it would wobble less?

[@mikep3322]

Had 315 on it for a year and no problems

[@praxton]

@@mikep3322 Yeah, like I said, it was probably fine, but I just didn't feel comfortable using it at that point.

[@thephilosopher5799]

Depends how big and strong you start, I’m a average sized female and I’m still using it after a year

[@sylvainh2o]

have you tested stuff like pullup chin-ups and even muscle ups?

[@Blondeguylifts]

I've squatted 435lbs for a set of 5 on this thing. Walmart offers rack extensions for $115 and a pull bar upgrade, $35 as well as spotter arms. $30 You can upgrade this thing over time, as long as you aren't consistently squatting over 500lbs I think you are fine.

[@larrypecan8405]

I've had this rack outside in the rain in Miami for 7 years. Still going strong. Rusted to high hell, but I only squat about 225 and it is just fine.

[@civonia]

I haven't reached squatting 400 pounds yet, but in a little less than two years I've went from around 187 on a one-inch barbell (with a less-than-safe setup) to having a 1RM of just over 300. Coop's reviews have definitely helped me pick a majority of my equipment.

[@BrandenH-O051]

I know it's been over a year, but what rack and bar are you using? Im in the same boat. Realized gyms suck now, and I am doing basic lifts with a 1-in bar and some weights at home. But i need a rack, and at that point, I might as well get an olympic bar so I can actually progress without fear of my bars allen keys busting out of the handle.

[@Sn00ze333]

@@BrandenH-O051hey have you decided on a rack yet?

[@brandonlaielli878]

Ive had this for about 7 years and moved it twice, taken it a part and put it back together. Would regularly load it heavy. Most of squatted on it was 350. Felt a little sketchy doing that but it has held up. Definitely a good budget option for people as a beginner rack. I purchased their spotter arms as an add on for benching.

[@vincnt9537]

Congrats on being able to squat 350 kg

[@pit5102]

@@vincnt9537 i don't think he was squatting 8 plates

[@edal1179]

This was my first squat rack! I grew out of it around a year. Good beginner item. Like Cooper said, get this and if you stay consistent you can upgrade but great first starter rack.

[@rw0037]

Not sure I agree that the uprights are all aluminum. I literally have this rack, FM-905Q, and have hook magnets on the uprights to hang spring clamps/collars. They also have spotter arms, a dip attachment, a landmine attachment, and side plate holders for this rack. I also got a second weight post to replace the barbell holder. With those attachments, in total, it was $230-ish. As long as you're not a powerlifter, lifting 500lbs for reps, this rack is by far the best value for the average person who's just looking to casually lift at home. Not everyone can drop $500 or $1k+ on a rack.

[@PhilMargolies]

Thanks for the review, Coop! I've been using this rack for about a month now. A few reasons for purchasing this model. * Price (obviously) * Size. Needed to fit in a spare bedroom, as we like to park our cars in the garage. * High SAF rating (Spousal Acceptance Factor) due to the first 2 bullets. 😁 * Starter rack. Just getting into the strength training game. Didn't want to go all out initially. As you pointed out, several shortcomings exist in order to get the $108 price point. * Nonstandard 1/2" holes and 2X2 uprights makes it difficult if not impossible to get attachments that aren't sold by Cap. The only accessories that Cap offers are spotter arms, Olympic plate holders (would be scary to add even more weight to the uprights 😱), pull up attachment, and dip station. * Lightweight aluminum uprights. Good enough for me but seems lighter than 11-gauge. * Missing spotter arms. I know they're trying to make a low budget rack, but at the risk of some beginners not realizing this is a must have and could prevent serious injury or worse. I added these to my purchase. * The J-Cups that came with my rack were identical. Not a left and a right J-cup. And only 1 set. * J-Cups not protected by UHMW. I purchased UHMW tape to project my relatively expensive barbell (more than double the cost of the rack). For my needs, as I'm beginner and not using anything over 150 lbs. at the moment, the rack suits me well. My plan is to upgrade at some point within the next 6 months to a year.

[@jwill121783]

High SAF rating (Spousal Acceptance Factor) ....very accurate. I used the first two point w/ my wife now she even uses it LOL😆

[@seilogramp]

​@@jwill121783 Glad I could help. 😁

[@orangevideo]

I got this rack to specifically use as a barbell stand for a sun-room gym ( 3 out of 4 walls were all windows, so I didn’t have the option to mount hanging barbell racks onto traditional wall studs ). Worked out great both aesthetically and structurally. So depending on your Jcup choices, it’s makes a great display/stand for about 8-10 standard Olympic barbells, or less if you’re including specialty bars.

[@imixmag]

I've had this rack for like 6 years. Mainly got it for pull ups and only use it with light weight. In a apartment and it does the job.

[@Swoleseph]

Excellent video Coop. I would’ve definitely used this rack back in the day.

[@turkishdelight6032]

This was my first rack. The paint from the j cups will chip onto your barbell, and the uprights will bend over time with even less weight. You should only buy this if you plan on upgrading in a year

[@Houcnc]

@@Flint9250 do you know where they sell them i lost mines lol

[@teo1120]

I have this rack since April 2021 and keep it outside where it rains and whatnot sometimes in a tent. It works fine squatting 450 or less but it is wobbly. I added some spotter arms. I also added plate holders on each side to add more stability. Don't plan on upgrading for a bit since I'm not a 500+ squatter at the moment

[@GunnWeiHeng]

I have this rack too, I’m curious how did you add plate holders on the side?

[@briand5047]

I was hoping Coop would cover how is it as a chinup bar compared to a power tower, and stability (with suspension trainers, and as a anchor while using resistance bands).

[@TheWanderingStone]

As someone who owns this exact rack, it wobbles a lot when doing pullups. It also sucks at attaching bands, especially trying to attach to the bottom. I like it for the cost but I'm not a monster and typically just do legs at a commercial gym anyway.

[@fryloc359]

I built something similar to this for doing pullups. My version is narrower and probably not as tall. but like the other guy said it wobbles a lot .

[@tonyshoeball7759]

Not gonna lie, when I was in highschool and wanted a home gym, I would have been able to pretty much only afford this, a second hand bench, and a crappy bar and plates. I would have loved it. Only thing I would want to add are stronger safeties and jhooks

[@charleslee4666]

Hey, do y’all think someone could attach olympic rings to the rack and then use it for rows? Scared the rack isnt sturdy enough

[@kmuck8677]

I have this exact rack and mine is definitely not aluminum as I have magnets stuck to it. Also I've ever had the bowing and bending where the uprights bolt together even at 300+lbs. The paint is practically gone in the spots where I set the j-cups and safeties and the j-cups don't sit flush like you mentioned which has me worried about the pegs snapping but otherwise it's lasted my first year and a half of lifting at home and I've more than gotten my money's worth out of it. My theory is if I ever get too strong for it that will be a good problem to have.

[@alfaalex101]

People like to dream like they be benching 400+lb or some bullshit but in reality if you get even remotely close to the limits of this squat rack for 12-16 reps with perfect form then you’ll be freaky bear mode jacked.

[@blandandturner]

I have this rack. I bought it in late 2020. It was a pandemic purchase. I don’t squat much more than two plates so I didn’t really need a very heavy duty rack. I’ve been using it anywhere from two to the five times a week and I have to say, it’s done a great job fir me.

[@roberthorn2685]

I owned this last year…had to put sand bags and weight plates on rear when doing pull-ups and I weigh 160

[@xenod1066]

Have you reviewed or spoken about the all in one, multi station, style (Marcy, etc.) home gyms? Are any of them worthwhile?

[@fightingwarrior5893]

I think you’ll be fine long term with no more than 225 on that rack. However considering how cheaply made the rack is one of the main bars could probably eventually snap which could be dangerous too.

[@hngloose4]

Great little rack. I used one for a few years and squatted my first 405 on that set up. Only problem was the bolts in the middle made for a less than ideal bench set up.

[@Devin969]

Assembly Sammy didn't add the extra perpendicular bolt at each mid point. It would've made it more stable.

[@NoFate247]

These budget racks absolutely get the job done, especially if your name isn't Basement Brandon or Justin Medeiros. For the average Joe trying to get it done and get on with their day, it''ll hold up

[@KrisGadventures]

So when's the drop test on the spotter arms?

[@tylergran1]

Thanks for reviewing these cheap racks! I know when trying to save money just getting into a home gym safety is a BIG concern. I bought the progear another cheap rack you reviewed because going to a gym is out of the way from where I live and with my work hours, it's a lot more convenient. So I'm glad to see you review the cheaper options for us casual lifters who want to start a home gym.

[@davidjarzynka4760]

When's that drop test coming? 👀

[@Param-Singh]

Have the same rack. Only using it for bench since i bench mid 200s but i don't know if i would feel comfortable doing 300+ on squats with it. Probably will be upgrading sooner than i wanted to

[@Param-Singh]

Also, i bought the safety spotter arms that cap makes for this rack and dropped one side of my barbell on one of them, and it bent the spotter 1/2 inch pin

[@codybrandenburg675]

The uprights are not aluminum, I mashed two used ones off fb marketplace together to make a “full” rack and welded a few extra mounting plates to get what I wanted. Is it the best option? No, but for the price and being able to pick up used ones for 40-60, it does what most people need at a budget until they outgrow it and need better gear.

[@SaisMoon]

I got the rack from Walmart last year. They had it on clearance for $20 bucks. The1/2 inch holes were a pain initially, mainly because I have standard weights. However, I soon fixed most of my problems after going to the local hardware store. The one thing I wish this had is bottom pegs for resistance bands. I have been using eyebolts as a replacement, and even with the spotter's arm, I don't squat over 250. However, as a person of 6'5 and 240, I can comfortably and safely perform pull-ups and ring dips, as long as all my weights are placed in both back plate racks. It has been a great starter and I do plan on switching it out probably next year. Once I get a solid 2 years of training back under my belt.

[@gvh5721]

I actually own this rack. For someone who is working out for health and longevity it works well. As I get stronger definitely will need to upgrade. IT has held up pretty good for 3 years using between 225-315lbs on the squat. The weight changes based on the reps. Ultimately it comes down to goals and what you are working out for. This is not for power lifters.

[@WhosNehptune]

do you still like it ? i ordered this rack off amazon a couple days ago and then this video came into my recommended. when he pointed out how small the pins are on the J-cups it kinda worried me.

[@Strategic.Strength]

Got one of these myself for $40 off FB marketplace. Has done everything thing I’ve needed! Squatted 400+lbs from it. Pressed 300+lbs from it. Done pull-ups at 220lbs bodyweight no problem. Put a couple 45’s on the weight post, and it’s as sturdy as most will need👍🏼💪🏼

[@LavarBurtonfromStarWars]

I have one bolted to the floor, it works for everything I can do and cost me two months of gym membership. Are you sure it’s aluminum? Mine is steel, a magnet sticks to it.

[@calcifires]

Love this cheap reviews series! Would love to see a review of Walmart's FitRX Smartbell, a sort of Powerblock 552 knockoff. Keep up the good work!

[@samkrumme4582]

Yesss I’m using the smart bells now and I love them and only spent 178 for the pair. Now for how long they’ll last I have no idea but so far they are just like the boflex.

[@ishaan90]

PRX on amazon now sells a cheaper version of their Profile One folding up rack called the Murphy Fold Up rack that has its uprights split into two regions as well. Would be very curious to see how that holds up or compares against the profile series.

[@emobunny1477]

Me and my husband met you at the gathering place in Tulsa Oklahoma and I just wanted to say thank you my husband still talks about to today how much meeting you meant it was awesome

[@souljamakinbread08]

If I was anyone purchasing this it some decent especially if your strength increase you stay around loading it to 350lbs maybe 400lbs max & just do more reps if your tryna get stronger on this rack other than that if you need to load more than that then just choose a power rack instead of a squat rack

[@richt5986]

Waiting for the drop test 😄

[@vette6991]

I would be extremely interested in a stress test on a hulkfit pro rack. Seeing as it does have lat pull down / low row along with jammer arm attachments as long as it's well built I don't think much more is needed.

[@nictownsend2005]

Would be able too weld the joints once assembled? Add some scrap cuts welded on the bottom to increase stability for cheap to stop the sway?

[@sethgaston8347]

Videos like this always reminds of how Eric Bugenhagen spent years lifting with the cheapest wobbliest squat rack, all while being a signed professional wrestler and sometimes lifting over 500lbs With it. It’s a MINDSET 🫡

[@adrianpeinado2934]

I have the same rack for the past three years and I haven’t had any issues yet. I do agree that they need something in the middle for better stability. For the price is not a bad rack. I bought he spotter arms as well and they seem to hold up weight. If you want a cheap rack to start your home gym I recommend it.

[@xXSubieSnacksXx]

I have this rack. Gets the job done. Good for pull ups and squats and I hang a pulley from it. Most people aren’t squatting 600 lbs

[@saltandlight1184]

Hey Coop,I've been watching a lot of your videos and really appreciate your reviews. Just have one question for you: if I'm going to buy a treadmill, for walking only, will a manual treadmill work or will it make walking harder? I'm 67 years old and can't do much running but I would like to walk as a means to get leaner. Just trying to decide between a manual or a motorized treadmill. Thanks for your time. Best of life... Dan

[@CVNTGETENOUGH]

What (mobile) gym setup would you recommend? I work security where I wanna pack up my tahoe so [ can workout at work

[@anthonynovak4015]

Could you conceivably weld the joint to make it stronger

[@Jesusdiaz925]

Could you review an Amazon power cage? Like the major lutie plm03

[@crazeeaz]

I bought the steel version second hand. It does what I meed it to do but I wouldn't want it as my only rack. You still get some wobble on heavy squats but that doesn't really bother me. My biggest issue is the bolts in the middle of the uprights are right where I want the j-cups to be for bench.

[@seanabrahams9846]

Coop! You gents looking good. Stronger, fitter, leaner. Well played!

[@kaccidesignkaccidesign8072]

where is the drop test video? A year has passed, why haven't you guys made a drop test video?

[@tbeehler]

Love ya Coop!

[@andydelassus2734]

I see they sell a half rack conversion with plate storage uprights. I wonder how much rigidity that adds?

[@andrewc6863]

I bought this rack not too long ago and it has lasted well through a few good squat sessions with up to 325lbs. I assembled my rack with an impact wrench and put about ten extra ugga duggas on every fastener, so I've haven't yet seen it bend at the upright. I'd recommend this to any beginner or some one who's looking to supplement their training at home when they get snowed in this winter 😉

[@AverageJoeFitness]

That was a cool transition from pushing the box off the table to having it completely built 🎉

[@aaronjohnson8165]

Do you have a review of the Fringe Sport Squat Rack? Also looking at a Hulk Fit Squat Stand with Pull up bar. Any thoughts on those. Budget and space is a factor.

[@xenod1066]

What's the next step up budget squat stand from this? I wonder if there's a way to upgrade the J cups?

[@iron_dorr6268]

You might could add a few extra pieces of metal plates and weld the seams for added security

[@macgotthis]

I was considering this. But also thinking about putting a steel sleeve over the connecting points. But i also won't be squatting over 350.

[@jeffmurnahan]

I want to see the drop test you never did it. I already bought a better one but I am interested to see how it does with spotter arms. Plus with a cheap $100 amazon welder I wonder if the rack can be welded so it doesn’t look like it’s going to split apart?

[@Number704]

I've had one for about a year, it works really good for an intermediate lifter. Go get 2 cans of rustoleum from walmart and it will last outside for a long time. (not sure how long it would last in snow I live in florida)

[@stevewarnell4450]

Can you do a reveiw on the Jacked Up Pro power rack

[@apcfitness]

Unless you're a really top powerlifter you can defo get away with a basic squat rack. I never see the point of buying crazy big racks that eat up space in a home gym. Just put some weight on the weight horns or on the back and it will be super sturdy. Also, you can bolt it down so it will be even more heavy duty. Most of these can hold well over 200kg and not many of us ever touch them weights. There is some stuff I wouldn't cheap on like bars and benches, but racks are defo one thing id advise going a bit cheaper on. Also I have a cheap argos squat stand and have got attachments custom made for it for me. Many people make custom equipment now. I have got converging jammer arms, spotter arms and more heavy duty J hooks made for my squat stand.

[@freedomrings1420]

I got a bench and rack from Craigslist for 100 and modified the rack with safety bars and angle bracelets with material I had hanging around. I also put my 40 lb dumbbells on the feet when squatting. Most people on here I don't even believe workout and act like your muscles know how much you spent on gym equipment like a woman does on things that you buy her. LOL 😂

[@scottvasnik]

Just posted my 70 sq ft garage gym tour. Maybe I should have gone with this rack to save space!

[@robertdoerr348]

Hi Coop, Could you review the Fringe Sport Garage Series Squat Rack?

[@martystrasinger3801]

My budget rack is a Body-Solid GPR378. i got it on sale from a local fitness store for about $500. 3x3, 11 gauge steel. The safety rails that came with it I didn’t like, they scraped the paint real bad every time I adjusted the height. The holes are oddly spaced about 3” apart. The saving grace: the holes are about 1 3/8” diameter which makes them the perfect size to accept 1” black iron plumbing pipes from my hardware store. (1” internal diameter plumbing pipes exactly fit the 1 3/8” holes.) So I made several j-cups with the plumbing, and my main safeties I hammered 1” cold rolled steel bars down the 1” plumbing pipes to make them super-strong. Threaded caps on the pipe ends keep them from accidentally slipping off. It doesn’t have plate storage, so back to the hardware store for 4x4s which I bolted to the rack uprights, and bought several storage pins from Rogue that are bolted to the 4x4s for the 45s and 25s. Change plate storage is, once again, plumbing nipples. The weight of the stored plates makes it very secure. Probably about $900 total for 3x3, 11 gauge with storage, customized to fit my limited basement space.

[@Houcnc]

where can i get extra j hooks i cant find them

[@Cichlidman]

I had that squat rack for years built my bench past 300 loved that rack

[@bobfabian192]

I have this rack, had it for at least 7 years. No problems. I lift daily out of it. Squat in mid 400s weekly. Stop falling for the expensive “home gym community” crap. I lift more than this doofus, guaranteed

[@philliponfitness]

You can put a landmine attachment in the barbell side. Highly recommend the safety arms

[@JBS7551]

Coop - Will you review the Pepin Fast Dumbbells?!

[@Pilxzy]

Do you reccomend any sheds that i can use for a garden gym under £500? thank you a lot

[@Dylan-zi1hv]

I wonder how much it would hold if you welded the joint?

[@ryanroberts7597]

Got the squat rack and barbell in my garage right now. No issues in for roughly 9 months with it. Interested in a review for the barbell. I really like it

[@amauriramirez4584]

does anyone know if you could adjust the height?

[@shawnqjackson]

I have this rack disassembled in my garage. I have not used it in five years. I purchased it 6 years ago. The only notable difference is that my rack is not aluminum. They were steel when I purchased it. I only used the rack as a pull up bar, and to hang my rings.

[@RayRay-zc2ed]

How long do you think it would last if it was setup outside?

[@timmyd9940]

has anyone tried the dip station attachment from cap also?

[@sergioromero5638]

Coop, the gauge for aluminum and mild steel dimensions are different. For example, 12 gauge in Aluminum is equal to 0.08 inches in thickness. On the other hand, for mild steel 12 gaugue is equal to 0.1046 inches in thickness. They might be saying the truth. Just FYI, there are different types of steel 304, 316, etc.

[@garygutowski6584]

Hey Coop, some of the companies are advertising early Black Friday sales on their offerings. Should I jump a squat rack now or should I wait for an even better deal on the actual day? Thanks!

[@mhmd5q282]

How could I order a rack from us and ship it to israel without paying too much on shipping . Im very interested on bells of steel hydra rack .

[@jeffmurnahan]

When are you posting the drop test

[@thebodybeatdownDiTi]

i have a 3x3 rack just like this and im benching in the 300s..have 405 for squats..i put over 500 on the spotter arms..mine dont wiggle in the joint area. However like all these little racks it does wobble more than a full cage..im getting new j-hooks and spotters for mine though..They are the weak point honestly.

[@pankil82]

Does it shake when doing pull ups?

[@donovansnodgrass9160]

where is your shirt from coop? Id like to get one.

[@clipse64485]

I had this same rack from Amazon as my first homegym rack. I liked it well enough. Didn’t do much crazy on it. My squat was at 385 so that was the most I used and it held up well.

[@cftvnetwork]

Does it hold standard barbells?

[@christianmeyer3082]

Can this be used as a bench press and sqaut

[@andruwcolby5233]

I’ve had that rack for 4 years, routinely sqat 350 with it

[@AyoSoma]

Did you do a review on the barbell yet?

[@777Demarkes]

I've been using this rack consistently for almost 2years now and it has held up beautifully. I admit, that at first i was nervous when squatting and doing pullups, because of the "wiggle" that is there. Let me just say that if you stay woth this rack, buy the plate holders that CAP offers... The stability that these add is tremendous!! Personally, i wish CAP offered more attachments for this... I do find myself every so often longing for the jammer arms or cable crossover pulley systems that others have lol... But bottom line, I'm 47 250lbs and use this 5-6 days a week and its held up without any signs of failure (4 days a week the weight is above the connection point on the upright... 2 days pull-up/Chin-up, 1 day squats, 1 day overhead press)

[@sungameloc]

I got a synergee squat stand for 150CAD a few weeks ago on Amazon

[@terrencemartin2621]

I bought this rack, or one identical to it March 2020 off amazing for $119. I even purchased the addon safeties! It worked fine and I did pullups and heavy squats on it. I then sold it in 2021 for about $150 (with the safeties) and bought a Rep 4000 squat rack.

[@kyreegary3620]

What is the name or link for that barbell ?

[@GIFTOFGVME]

The guy holding the level up to the top part of the rack is killing me. moving it up and down like its going to change, then putting it on the backside thinking he'll be flabbergasted by different results... too funny...

[@dylananderson8378]

I got the synergy full squat rack was thinking about getting one of those first but I decided not to so I got my synergy full squat rack and I’m happy with it and love it 👍🏻

[@gumplebumpproductions]

I have this rack and it doesn’t have the same problem with leaning. I think the one in this video needed to be tightened up. That or it wasn’t cut right, which is very possible. Otherwise I agree with everything that’s said in this video. It was cheap, I was on a budget, had a specific height limit and was surprised by how well it works. I’m clearly not lifting any ridiculous weight but it’s stronger than it may appear.

[@travisauth8909]

Gonna be honest, I squatted over 600 pounds on this rack. It always swayed side to side whenever you unracked anything more than 315 and having never used a squat stand before (just high school and college power racks) I assumed they all swayed in a similar manner. My dad came and used it once then immediately bought a rogue monster lite squat stand for my birthday bc he was so scared of the swaying when he loaded up 150 pounds. All in all, I used it virtually every day in some capacity for a year and a half and it held up fine. The J cups obviously scratched immediately and I had to rig safety straps using ratchet straps (bailing with this was always interesting but they did the job). Overall, I’d recommend this as a first squat rack to anyone looking to buy their first rack on a budget.

[@outtrigger]

good dad