I Bought The World’s Most EXPENSIVE E-Bike Brakes... (Volar Sport Review)

[@logantaylor8600]

Brother we got the same name.

[@logan-taylor]

no way

[@logantaylor8600]

@@logan-tayloryeah

[@140theguy]

Beware the man with two first names.

[@Soeks77]

yes pretty common name

[@Luffy-gx9eh]

@@logan-taylorcan I get an e-bike preettttttty please

[@Xotas-sb6em]

I don’t even have an E-Bike but Logan has some bangin beats and great personality.

[@logan-taylor]

right back at you brother 🙏

[@Sunspot-19]

Logan, the first step in using DOT fluid is to degas the fluid. DOT absorbs moisture annnnnd air. Since it absorbs air, when it is placed under vacuum, it will look like a freshly poured glass of champagne. So, using your syringes, you can eliminate most of the air in the fluid. Degassing prior to a fill and bleed will provide a firmer lever feel and a longer lasting bleed. Second item, true the rotors to have less than .002" runout. Bedding in the pads, ride like a human, avoid overheating during break in. Heat them up with normal riding and then stay out of the brakes for a few minutes to cool the rotor. That will give you a longer lasting pad and rotor with better, fade free dirtin'. Great channel, my friend!! DOT fluid cleans up with plain ole water!! Easy peasy stuff.

[@Danielxperez14]

how do you degass the oil? ive always bled mine the simple way and never knew about this stuff your saying

[@Mastr-Tech]

Bedding in brake rotors requires getting them very hot. So the pad will transfer material to the rotor.

[@Sunspot-19]

@@Danielxperez14 I'll start with the properties of DOT fluid. It absorbs both water and air. Place it under vacuum and it looks just like champaign. First is clean, fresh DOT 4 or 5.1. Next step is using a large syringe with a blockoff valve for the process. Draw the syringe filled with DOT and observe it's behavior. Those gas bubbles are being removed at this point so they do not sully a bleed effort.

[@Sunspot-19]

@@Mastr-Tech After which I get to replace warped rotors. Material transfer happens at normal operating temperatures with a little patience. There is no need to make em turn red!!

[@Mastr-Tech]

@@Sunspot-19 overheating the rotor does not warp it. Either the rotor bolts are torqued unevenly or you make a hard stop and transfer a load of material into one spot. Do a little more research on bedding in brakes for bikes and cars.

[@ameenwahal]

You get the old rotors , the new rotors now thinker and more service area just like a motorcycle brake . Mine just arrived today .

[@LuckyO97]

Where at? I want them hahaha

[@ameenwahal]

@@LuckyO97 i ordered them directly form there website, they are insane best upgrade ever

[@jeterrywoods8500]

Dude I just watch you learning how to wheelie today n the newer videos you just popin that thang now love it ❤❤

[@tumbles94]

I have had these brakes for over a month now on my e-ride pro ss and still really happy with them. Mine do not make any noise and that was one thing I really liked compared to stock. I am also going to order an extra set or two of the brake pads so I will always have some. They do stop very nice and you can abuse them and no brake fade. Oh and I ordered mine direct from Volvendo on their website in Italy and got them pretty quick.

[@logan-taylor]

glad to hear they're holding up!! They're ridiculously powerful haha

[@shockadellick]

@@logan-taylor The e-Ride pro would be the best bike, if they would give it a Gear Box. kzbin.infoUgkxLPttPQZVXcerX6vw9Q7LUVI-PpK2YQSi?si=KMUB-iXfX4J1cjVK

[@MioRissolo]

the noise is contamination from spilling the teeniest bit of dot fluid on the rotors. brakes are usually bled without the pads in

[@logan-taylor]

i took the pads out to bleed the rear, but must have gotten it dirty somehow!

[@Sunspot-19]

The brakes these bikes come with are on par with installing Toyota SR5 brakes on an F350 Super Duty... Good to see there are brakes being offered to make these awesome bikes actually safe to play with.

[@koltenspencer407]

where did you get that rear brake line plastic cable guide? I hate the stock one that comes on the e ride.

[@logan-taylor]

that's just one I had lying around the workshop, but I think you can get variety packs on Amazon for pretty chceap

[@staktikis]

if you wanna fix the brake rubbing on the rotors try to loosen up youre wheels and hold down on the brakes and tighten them back up. It will center the rotors

[@robertsilva5041]

I got you clicked the like and subbed. Love your content and outstanding job 👍

[@logan-taylor]

Welcome aboard!

[@YasuoFarkas]

Hey! What brake do you recommend for stealth bomber ebike 8000W?

[@ConnorGMedia]

Dude your quality and production is style is so killer I love it! #logang

[@logan-taylor]

thanks so much for the support as always bro!!

[@JonnyDuzzit]

Both ya’lls edits are 🔥 idk how you guys do it. Keep killing it!

[@MASC440]

Another great edit mate.

[@logan-taylor]

thanks brother

[@jaydenkirk3874]

You can see the tread in the ground- it’s the tread of the tire from when he went through the puddle

[@Rev8]

Hey! I just bought these and they're howling like crazy, front wheel is rubbing too and stops spinning. I'm really hoping it'll clear up like yours did!

[@140theguy]

In a word... No. You can get real motorcycle brakes for 1/4 of the cost of those. You want to use brake clean on your brakes before you even install them to prevent squeaks.

[@scotlaughlin2487]

Maybe do a brake bedding/break in vid? Seems to make a noticeable difference.

[@koab7781]

I ordered these and you got them already I’m jelly 😭

[@Joe.8671]

You should review the solar eclipse 2.0 ebike

[@liveteklol]

Did you get the latest disk brake version which is thicker and larger ?

[@sunnywang5268]

Hello, I would like to know the size and brand of the tires. Thank you

[@999deathrace3]

nah, the ultra bee brake setup for LBX made by prickly is by far the best. shouldve waited a few more weeks

[@benni16it]

by far the best..? how can you tell? got both to compare? ;)

[@1up.studio]

😮‍💨😮‍💨😮‍💨😮‍💨😮‍💨😮‍💨 build is lookin real nice brotha.

[@logan-taylor]

much appreciated 🫡

[@elmotheconqueror]

"aka... spooky time" that is the realest thing i have ever heard.

[@logan-taylor]

😱

[@VIGGZEN14]

yo, do you have any tip on how to change color on my surron? ik powder coating exist but thats probably to hard for me. it would be perfect if you know like a full wrap or something like that

[@logan-taylor]

i’m working on some cool wraps! that would be my suggestion, but go with a good quality one like ECD - or wait a couple months for the first drop :)

[@VIGGZEN14]

@@logan-taylor ok thanks I’ll wait for the video 😊

[@galaxylorde]

I really wanna see someone to try SRAM Maven Ultimate brakes on these e-bikes, they are soooo powerful for a mountain bike, what will happen on e-bike

[@SurionZega]

Adding them to the ride asap brother

[@SurionZega]

Should I leave the hayes dominion on the local mtb trail with a FREE TAKE ME note?!

[@YOUNGEL3]

Do these brake connect to the back brake light?

[@surron_sefi]

Great video as always

[@Ebbrush3]

i was first to do 250mm fnt/rear on eride with stock calipers ....kicks ass

[@logan-taylor]

it’s a suuuper solid setup for the price

[@chuckdawit]

Hi Logan. Do you have a page you can link, that has the full kit for you brakes? If not I don't see any names of the rotors in your notes? I want to make sure I get all the right parts!

[@kopparsulfat]

The price aren´t bad considering what you get. I changed the front brakes on my Buell 1125r and the front setup did cost more than your setup. :D

[@logan-taylor]

haha that’s a good perspective on it - sick bike

[@dukedub]

Chief, you gotta hose down pads with brake clean

[@robuxgamer9487]

Hey logan ive bought these brakes but after riding them for 4 - 5 days they keep making that sound do u know any fixes for it?😢

[@user-nt5xc2ps5s]

Where did you get you surron?

[@cingkole7893]

Good review!

[@metalofthedeath]

What stem is that

[@Mr.Bozhko]

Is there a place to find where the Seattle meet ups are happening I have a Surron but I can’t find any groups to join

[@logan-taylor]

join saturday night ride on facebook, great way to meet a bunch of people in the electric community here!

[@VinsanityB7]

Yo Logan I just got my e-bike pro ss and I’m in the Seattle area we should link up!

[@russellzauner]

am subbed and love your content but people gotta know caveat emptor - RR burned me on a KingSong S22; glad you're doing okay with them just watch your self...

[@logan-taylor]

what happened? did it get resolved? So sorry to hear that, i’ve never heard anything bad about them before so that’s disappointing to hear :(

[@russellzauner]

@@logan-taylor naw, I think they just bit off more than they could chew THEN the situation got bad for everyone THEN made the unfortunate decision to stiff arm people who wanted to simply just return theirs, new in the box (or even get a refund on the news that delivery was all the old stuff and failure rate would be HIGH - I had not picked it up yet but I was going to lose it if I didn't at that point)...just saying that I've dealt with 3 different dealers and ewheels is the only one of the three that if I was still qualifying vendors back on my engineering team that I would say is okay to be on the list to buy from. Hey if they still want to make it right, I've still got zero miles on my S22. I'm not a bridge burner, just an anecdotal advisor. I vote with my wallet, there are several vendors and companies I won't do business with for many different reasons (most of the time it's human rights violations). There are many other dealers, I'm not choked out.

[@c_i_f_e]

Another great vid! What tires are those?

[@logan-taylor]

shinko 241’s! 2.75 in the front, 3.50 in the rear

[@Tieu23]

Will you be trying Lewis tech brakes , specifically the ep8+?

[@logan-taylor]

i'm curious about them, but they're hard to get ahold of!! If they want to let me borrow a set, i'm all for it :)

[@armyca]

It is old style rotors... New one 3mm thick and 27mm braking surface

[@logan-taylor]

saw those on their website, might have to order some

[@talamies]

I have TRP's is it worth an upgrade? And when are you testing the Privkly Ultra bee conversion breaks? Would like to see how they compare to these.

[@logan-taylor]

TRP’s are great, i’m gonna keep mine in the surron for now if that helps, but the volars feel maybe twice as strong. i also have a couple buds who got the UB brakes on their lbx, i’ll give them a try and see how they compare!

[@Eljairgarcia]

When we getting a wrap video for the eride pro 😮

[@logan-taylor]

you see that white test wrap on there 👀 workin on it

[@SonLe-gh3dz]

Im probably gonna get hayes dominion a4 since those use dot fluid

[@logan-taylor]

great brakes!

[@alroq3904]

Where did they get the rear dual caliper bracket for the volar brakes?

[@logan-taylor]

I think revrides will have it soon, but it's not out yet technically! I'll probably get it tbh

[@206fab]

Fire video!

[@logan-taylor]

thanks king 👑

[@zythfn]

Great video!! I’m thinking about getting a e-bike and am wondering what’s the best e-bike to get overall, and also what’s the fastest e-bike. If you don’t mind could you rank them from 1-3, 1 being the best and so forth, for both speed and overall. Please and thank you!

[@Mr_I_Got_One_Of_Those]

E ride Talaria Surron

[@1.crowder]

What direct mount and riser? Looks like a funn but its polished and looks great, if its a funn where did you get it or how did you polish it? Also the direct mount riser or spacer or whatever its called also looks great and matches the direct mount where did you get that? Thanks

[@logan-taylor]

it’s a funn with an emotobros 14mm spacer. for the stem i just stripped the anodizing & polished it by hand!

[@1.crowder]

@@logan-taylor Awsome, thanks!

[@limitlessstunts]

Is it possible to run the Rippin moto caliper bracket with the VS caliper on the rear so you could keep the 250 mm rear rotor?

[@logan-taylor]

unfortunately not - the mounting holes for the Volar Sport are much wider, so they need a special bracket or adapter. I might just run longer bolts + spacers to make the spacing correct for a 250!

[@limitlessstunts]

@@logan-taylor Dang. Okay thanks!

[@benni16it]

they have upgraded the discs now.. new kits come with 3mm thick rotors insteat of the 2.3mm and 228mm on the back with a wider area front and back to cover the entire break pad. guess thats the better option then a thinner 250mm rotor.

[@surron_sefi]

4:11 or put some spacers

[@victorfuentes4172]

Logan got that sleeper build🤨

[@logan-taylor]

thanks bro 🫡

[@duggdrealer]

" The only solution is to buy more parts and put em on the E Ride " lol

[@shay_mx34]

How come your rev rides discount code doesn’t work

[@logan-taylor]

?? which one doesn’t work? DEALZONE should work great

[@shay_mx34]

@@logan-taylordeal zone doesn’t work

[@TheBoss42x]

What headlight do you have

[@logan-taylor]

Baja Designs S2 sport!

[@Laquoquious]

I’m sure they’re great but my SRAM Mavens are nuttttssss

[@Bengy22]

What rotors are you running with those?

[@logan-taylor]

those do look sick

[@Laquoquious]

@@Bengy22 right now stock 220 rotors. I have not gotten them to fade. If anything it’s hard to keep them at temp

[@InfectAion]

Check the Lewis LH8 bruh...

[@2Fast_Brian]

Try brake cleaner, you may have got some fluid on the rotor, that was the issue with the squeaky rotor

[@Joe-72]

You're great at editing video, for KZbin. I just can't understand the point of testing brakes on the apshalt with cross tires. It's nonsenses and unfortunate and pointless. Before you try some breaks, just start with decent tires for the road. And they barely exist on that bike. But I hope to find the best breaks for my Talaria Sting with road tires (aka, supermot').

[@taj4l]

I subscribed only cause your friend has more subscribers than you. Thanks for the info and video Logan! Plus I’ve been watching your channel for a few weeks now lol

[@logan-taylor]

hahaha thanks sm, i'm trying to catch up

[@JustMoto_15]

What vacuum brake bleeder do you have

[@logan-taylor]

one from oreillys haha

[@ConnorGMedia]

I felt your pain when you pulled your front lever in😂 bleeding brakes suuuucks

[@logan-taylor]

my heart sank

[@JustMoto_15]

If you will upgrade your battery, will you get the 81v

[@logan-taylor]

perhaps…

[@JustMoto_15]

Now thats something I can’t wait to see

[@legna199111]

You shouldn't bleed brakes while mounted cause you can get oil on them and that makes noise

[@logan-taylor]

i took the pads out for the rear 😎

[@SharpenedSteel1]

They cost a little extra because they come with a built in horn.

[@OfficialMonk69]

2:34 ok buddy

[@davius1911]

thanks… now i want them

[@logan-taylor]

they’re pretty awesome ngl

[@davius1911]

@@logan-taylor Swiped that card, now they are on a boat from italy 🤌🏻

[@logan-taylor]

@@davius1911 nicely done, you’ll love em

[@vincentcuttinoo]

discount code isn’t working!

[@logan-taylor]

thanks for the heads up!! just sent a message to revrides to see what’s going on

[@logan-taylor]

FIXED!

[@ijo77]

you should make a scootering video

[@logan-taylor]

electric scooter or kick scooter?

[@201projects_]

Yo Logan u gotta do a giveaway!

[@logan-taylor]

what should i give away haha

[@201projects_]

Any e bike lol like surron,e ride pro ss,talaria triple x, talaria mx4 I was spend so much in the giveaway lol I’m entered in 4 right now you have to do some kind of one. Keep up the good vids ur channels growing!

[@Collin-ij6vt]

The discount codes dont work

[@logan-taylor]

thanks for letting me know - just sent a message to revrides!!

[@logan-taylor]

FIXED!! Just talked with RR, thanks for the heads up.

[@Laquoquious]

The Lewis was meant for surron no? As an mtber, they def not for bikes

[@logan-taylor]

i think lewis started as MTB, then started marketing specifically for surrons? i know if some mtb guys who run them and really like them

[@Laquoquious]

@@logan-taylor good deal. I got sram mavens on my talaria rn. I couldn’t imagine the power on an mtb, nonetheless an extra piston😵‍💫😵‍💫

[@calvinforsure]

as someone who rides mountain bikes alot and has a half decent knowledge of mountain bike performance and maintenance , and someone who would love to own an Ebike. there is no fucking way you'd get me riding one with mountain bike brakes on. you guys are mad. High end mountain bike brakes such as Hope tech 4 brakes are real hard work to maintain for just enduro mountain biking . you guys need lots of better brake options.

[@samonrol9011]

Vor the backbreaks you wont anything more than a magura mt5 Only the front breaks need some more for propper stoppies the pic at 5:53 made me laugh so hard How to burn money 101

[@armyca]

Thats weird way to install front brake line... Also it is upsidedown... Lol

[@randomizr]

at this point bro is just buying the most expensive of everything

[@logan-taylor]

someone’s gotta

[@randomizr]

@@logan-taylor real

[@PerroDelCielo]

if this pads brakes are like car brakes then you shouldnt really be hard testing them after install, when pads are new overbraking can cause them to heat up and crystallize them which can later cause damage to your disc/plate brakes

[@phreshnphunky]

sounds like your rear brakes got a bit contaminated by the sqealing

[@logan-taylor]

i removed them to bleed and everything, but must have gotten some fluid in there somewhere! it fixed itself over time luckily

[@ee-vn3qj]

DEEPER INTO THE STROKE???

[@logan-taylor]

🤫🤫

[@Burronster]

I’d rather have my brakes bite hard than not be there at all just gotta have brake control

[@logan-taylor]

these bite way harder than anything else i’ve ridden other than full moto brakes. there’s just way more modulation when you’re braking hard, which is a great feeling & super confidence inspiring

[@BM-zm1jl]

You're only paying for the brake mounts and rotors. The calipers are probably from aliexpress

[@logan-taylor]

send a link i’d love to test them out!

[@zmr8882]

It appears the rotors that come with the kit have the same contact patch as mountain bike rotors. This defeats the purpose of the larger pads. Dumb.

[@logan-taylor]

they updated the rotors actually, full contact patch and 3mm thick! seems like all the kits are shipping with that now. but even without the full height contact, the amount of pad contact is huge compared to a mtb pad on the same rotor.

[@CHANCEVICE]

its definently not the most expensive brakes there are full moto setups that are a bit more

[@larnak974]

It is the most expensive designed specifcally for surron.

[@bradleyhille6163]

Bike is tricked out😮‍💨

[@samuelpiang722]

Logan why so many bots 😂

[@logan-taylor]

IT'S NOT MY FAULT IDK HOW TO STOP IT

[@RP-xb3vh]

What’s up with the instant porn channel comments 🤦🏻‍♂️ you should get some Super Motos on it! I have the TRPs and 250mm rotors and they’re totally fine even with my 18KW tune but I use regen thumb throttle to help when needed.

[@logan-taylor]

literally no clue, this always happens no matter how much I ban them lmao. I have the same setup on my Surron, the thumb throttle is super nice for hills, might do that on the E-ride too!

[@tacticooldennis]

At $1k I'm gonna have to wait for a Chinese knockoffs next year.

[@logan-taylor]

ima let you test those out first lol

[@tacticooldennis]

@logan-taylor I don't mind being a test pilot. My bomber clone is 99% Chinese already. Stuff made else ware was just imported and rebranded.

[@larnak974]

​@@tacticooldennis Usually yes but the Volar sport brakes are completely Italian engineered. No chinese knockoff sadly...

[@tacticooldennis]

@@larnak974 I dunno, people throw around the "Made in Italy" like it means something magical. It could be a Ferrari or a Fiat. I never heard of Volar prior, but at the end of the day, were all just looking for stronger brakes that are still relatively small and light.

[@KevinAugustt]

Awwww. not for ebikes but edirtbikes? Wanted to get some good brakes for my ebike.

[@ohhmy_c]

Can i plz get a e bike Im a huge fan from South Africa where ebikes can easily reach R20000 So this would really help

[@rays3995]

Call it a e dirt bike not a e bike

[@EMTB17]

100% supporter of these Emoto. They’re all cool as hell. But it’s definitely not a bicycle peep. People need to stop calling it a bicycle. A bicycle has pedals. Try a bicycle because it’s not legal to ride on the street because you can’t register it nor is it legal to ride on trails because it’s too powerful. Stop calling out a bicycle and call it what it is.

[@ObscureGator]

Who called it a bicycle?