I Bought the World’s SMALLEST INFLATABLE PAINT BOOTH!

[@djoyce777]

Thanks for posting this... after watching your video, I settled on the smallest inflatable spray booth by VEVOR. This one comes with 2 blowers. I purchased an explosion proof fan and am in the process of building a 3/4" PVC pipe frame so I can finish my guitars without having to keep the fans on at all times. Thanks for all of the great ideas! There aren't many videos of small inflatable spray booth set ups out there. Hope you post another video of you spraying. Best of luck to you!

[@flyinphil6884]

No worries man! I was in the same boat, and there aren’t many reviews or videos of these little booths. I’m glad I bit the bullet and got one, though. While it is no substitute for a real booth, it has been fantastic for the first few little projects I sprayed. The pvc skeleton is a must, as I’ve been able to kick the booth off about 20 minutes after finishing my spraying.

[@ANDY-we7mr]

HI PHIL I GOT A GROLLIA PRO SPRAY BOOTH OF EBAY MATE 13 FT X 8FT ONE PROBLEM MATE SAME HERE PHIL ONY ONE PUMP I SOLD OVER SPRAY ALL OVER JUST BROUGHT ANOTHER ONE BUT PHIL I HAVE THE 12 INCH FAN LIKE YOURS PLUS MATE THE ELEPHANT 🐘 TRUNK MATE WHAT GOES ON THE VENT ON THE SIDE 😊

[@flyinphil6884]

Hey man! So I use the one pump to inflate the booth, and I just tie the other inlet into a knot. I use my 12 volt extraction fan to suck the fumes out, and the wall filters on the booth essentially become intake filters instead of exhaust filters. In order to keep the booth from becoming too much of a vacuum, there is a small vent in one of the top tubes of the booth that I open when I use the extraction fan. If you watch my latest video (painting a glass flake guitar), I explain a little bit more about the actual use of the setup!

[@QUANTUMRESIN]

New subscriber here!! Just came across your video on spraying flake. Found this video…figured I’d sub and watch all your videos

[@flyinphil6884]

Thank you, I appreciate it!

[@hadieyni5538]

Thanks for all🙏

[@kr2513]

I wonder if you could use a booth coating in there

[@flyinphil6884]

You know, I seriously considered grabbing a 5 gallon pail of spray mask so that I can pressure wash off the walls every once in a while. I’ve already sprayed in it once (video coming soon!), but I may do that anyway to increase the longevity.

[@Cammoron50]

What do you mean by, " I don't wanna be that guy" when you said you dont want to hit your neighbours with the paint overspray and smell?

[@flyinphil6884]

I was just thinking of you, sweetheart!

[@Cogeeto]

This fan isn't explosion proof, based on it's manual. I have the 10in Vevor, and the motor is mounted on the outside. There's also a 12in model with the motor on the outside. Be careful with this one!

[@laurentmaggi5448]

Do you think the vevor yellow one are explosion proof ?

[@hadieyni5538]

New subscriber here 😊

[@flyinphil6884]

Thanks for subbing!

[@icepick765]

Bruh ur on KZbin!

[@flyinphil6884]

Haha you bet!