I Broke The LS S10 RIGHT BEFORE ITS FIRST DRIVE...

[@danielblocker8008]

I dont know why seeing that gas pedal installed was so funny but that had me crying! 🤣 -Mashed potatoes

[@harcormor]

Omg I laughed entirely too hard at that!! 🤣🤣🤣

[@jovinboyal]

It’s like that meme. Not running LS- upgrade Sort of running LS- upgrade Great running Ls- upgrade (Clears codes) High idle LS- fuck go back. Also. Mash potatoes 🥔

[@HEATHENYT]

😂

[@NITSUD89]

Guarantee you have an air pocket near your coolant temp sensor that is making the ECU think the engine is still cold... Let's get some likes so he sees this!! Usually the port on the head goes from head to head

[@ironman12328]

When you clicked so fast that the video is still 360p.... damn

[@Saab2Stroke]

still 44minutes later its still 360p lmao

[@LoL-tc4cm]

1 hour and its still 360p

[@Sneekyy.]

Even now it still is 😐

[@anonymous5072]

I have 1080p

[@anonymous5072]

@@christopherc1976 I’m confused

[@sethminter805]

The coolant leak on your head runs to the throttle body. You’ve also got an oil line that runs to the throttle body

[@Mikkovaikka]

"dude I can't believe this actually worked" a phrase I've been hearing a lot on this channel lmao

[@FlankedShots]

The first nipple is the crossover tube for the heads, connects both heads in the front under the intake. The nipples out the rad are for the transmission cooler lines

[@eman12910]

An inch or two shy under there, I feel ya man 😂😂😂

[@bruhitswilliam9188]

On the Throttle body put a filter with air intake hose its going to help a lot starting it up.

[@spmusiq4239]

It’s dope watching Brad and Robbie back to back... Mash potatoes 😌

[@KingASE88]

360p gang

[@sebastianolsson9063]

I hope this is clickbait. But I can't lie, I'm excited to see some carnage🤣

[@rajsieunarine8436]

Mashed potatoes

[@elirobinson5199]

I was thinkin the same thing😭

[@houseofsmokegarage6867]

Yes! The bank 1 sensor 1 and bank 2 sensor 1 O2 sensors need to be plugged in! You will be reading really lean and it won't run right.

[@eli2685]

i love youtubers like Robbie that show the hard and not so enjoyable parts of working on cars that you normally wouldn't see and therefore expect. also, mashed potatoes!

[@corrinabean8955]

PLEASE LOOK AT BUILT OFFICIAL HE HAS SUCH A COOL CHANNEL IF YOU LIKE THIS

[@novaracer2000]

The intake air temp sensor is part of the maf, it wont run right without it,you can convert it to speed density in hp tuners and not have to use the maf. You would need to add a iat sensor

[@justsomeone89]

I think its running in limp mode. It runs lean and doesnt run when you pull and clear all the codes. Then it runs even leaner... So no start. When it warms up it will run. Check Map sensor if it needs one. Temprature sensor check (coolant and intake) and does it have maf normally? It needs that, otherwise It will always be like this. Without sensors it will always run in limp mode and the current tune for that is a lean mixture. Normally it would run on a rich mixture in limp.

[@Fadedmane1]

Feel bad for you man you tried everything to get that truck started all I can say is men is to don't give up on yourself don't push it over the limits

[@SpeedLane78]

Mashed potato!! That gas pedal made my day 🤣

[@vazago3854]

Well Robbie I can attribute your videos to my recent purchase of a project. After years of debating and thinking I just don't have the know how, your videos gave me hope and I recently came across a deal that was too good to pass up. Bought myself a 1984 ford ranger because of your s10 build and I can't wait to get wrenching on it, thanks for the encouragement with every video you do!

[@matthewtucci6318]

Robbie, I think you also need a different coolant overflow that has a cap that will hold pressure since that rad doesn't have a pressure cap. Hope that makes sense

[@Motorcyclefan17]

You need that mass air sensor for it to run right

[@randomvideoman1234]

I usually fill them when there's no fill cap I fill them from the overflow resivwar

[@CASVSXX]

Sorry about the buzz kill but tbh I always thought you should get the correct harness one for looks so there not a bunch of looms everywhere but two when you pull the motor to do the rust correction it will be that much easier to pull and reinstall

[@aluminus]

Cant wait to see these projects evolve

[@aluminus]

mashed potatoes btw

[@alancottrill]

Keep the LS S10 content coming!

[@ignassiuika2677]

360p?

[@nissanmikey]

You need to run the maf and iat for that thing to run nice in stock form.

[@yetiproductions1727]

Just to let you know you will need a presser return bottle on coolent . Not a window fluid container. Because wires go to it that goes to computer. Hope this helps a little.

[@Officialflacolow]

Robbie it’s alright man I mean you’ve gotten far with the s10 man you’re doing good I recommend in the mean time working on the 300zx

[@orabates1823]

It would help if you attach the MAF sensor (Mass Airfrow Sensor) that gos between the factory air cleaner and the throttle body. The way that you have it right now the PCM (Computer) does not know how much fuel to add to the motor. The MAF sensor monitors the amount of air going into the motor. The computer reads this and then tells the injectors how much fuel the motor needs to run at the correct air/fuel ratio. You can also modify the transmission lines so that you can use the factory battery tray location.

[@kylenunley21]

When you remove maf the pcm relies on ve tables and require o2 sensors. Without the o2s it’ll somewhat run if you have a maf. O2s are a pretty big deal on these though

[@meanmachine1972]

Love your vids. I'm learning a lot about working on cars thx

[@stratisgryparis6131]

"For the sake of getting on the road today, I built that", little did he know...😂

[@thecolliwog141]

Do a Holley terminator x and harness

[@TheNinjaMonkey43]

Glad youre just biting the bullet and getting the wiring redone for the S10. It was getting pretty haggard tbh. But i think this will help it get together a little nicer before you go ahead and do a full rebuild on it. Mashed potatoes

[@alexdotzko]

Back after a while of dealing with my own shit! Glad to see you're well. Mashed potatoes since before the wish video on the BRZ baby!

[@ajmasson]

I got a fuel cell for sale located in Muskoka!

[@Ryoneftw]

Loved the video and I always love the fact that you show us everything that goes wrong in the process, because when you finally do get it, man it feels so good. Mashed potatoes.

[@Officialflacolow]

Robbie can’t wait for the s10 to finally start running well 🔥

[@KeyRider]

Hey Robby the dip stick you put in won’t have the oem length so your fluid level won’t be right autos need to have the proper level to work and shift right to much fluid you’ll blow seals out not enough rough shifting and could burn clutch packs out if low enough.

[@hotrodfarmer6308]

That’s why I’ll always keep a small block 400 in my s10 no computers or sensors air fuel spark and she purrs well growls but I like the ls engines but I’m old school

[@rauldiaz70]

Nice 👍 where’s the update video?

[@keithlarsen8423]

u gunna turbo it?

[@cyruslever586]

I just realized when he did the close up... he looks like the grown up version of Dewey from Malcom in the middle 😂 🤣😂😂🤣🤣🤣❤

[@ptdteam2018]

You can't really delete the MAF sensor. When the MAF goes bad or is unplugged the ecu automatically goes into speed density and runs on the map sensor. When you cleared the codes if once again started looking a for MAF which isnt there so it wouldn't run.

[@getsum049]

yo that gas pedal part had me rolling! stoked to see the s10 build continue and hope you work on the genny soon. mashed potatoes

[@Shred72]

Coming from someone with a W140, how the hell did you even start it without a maf. HOW WHAT MAGIC

[@SeruiX]

5:33 lmfao, I can't... Mash Potatoes

[@mattkirby6239]

Any updates on the s10 I follow your channel and currently doing a 5.3 swap in my blue 87 s10 and love the s10 videos. Did you ever get your harness back. I’m ready to see some updates!

[@SelfAwareDegener8]

Mashed potatoes! You made the right call. Cant wait to see the s10 rippin

[@Insane98]

The computer realy does care about the o2 sensor being cleared. I just did mine on a audi, and it did the same thing. Except I can keep it running until the o2 error comes back up.

[@Oscarjaimez60623]

Mash Potatoes. Great vid bro. I always enjoy relaxing at home watching stress yourself out with all these car issues lol.

[@juliandavila7676]

What kind of spark plugs wire are u using

[@juanc1503]

I’m loving these S-10 videos

[@blue2fifty]

I love the other guys (I feel really bad because I’m blanking on it) Vstar it’s clean

[@blue2fifty]

Oh and mashed potato’s

[@corre7505]

for you who does your own parts such as brackets etc. I suggest you purchasing a 3D-printer, it is easy and cheap to produce parts. And you can print in plenty of materials. From plastic to metal, carbon fiber and nylon, but that is just some examples. Pretty stiff and reliable materials. If youre interested, comment back and we could keep in touch on mail or DM, if not somewhere else

[@jamesvesely131]

It will be worth the wait! Can’t wait for the results! Mashed potatoes. That sounds good lol

[@habibalekozai8130]

Yo bro how much hot wheels do you have

[@aricius7130]

There is no time to wait for HD. 360p is enough

[@RebuildandRenovate]

Mashed potaters 🔥

[@bengthansen9851]

Mash potatoes. You're doing a great job Robby keep it up love your videos. Have a nice day from sweden

[@dubssalamander]

Civic vid??

[@errPopu]

MASHED PERTERTERS

[@tylerjohnston9189]

Mashed potatoes! I love what you’re doing man. If you run speed density off of the iat and map sensor you don’t need a maf, and if you plan on boosting it, it’s better to run speed density anyways.

[@brandonfox0619]

Mashed Potaters or something like that

[@xxdogukanboyxx4902]

Hey man, love the content! What year is your BRZ?

[@anonymous5072]

“Two little nippys wantin to hang out” 💀😂

[@nathenb27]

Yay a long vid again

[@gabefields8494]

Mashed potatoes. This build has me super excited to complete mine. Keep up the good work.

[@noahj9172]

I love the NF hat!!

[@christiangutierrez83]

Robbie: What are you doing this is a car channel? KZbin: You legit had several episodes on 4 wheelers.... so... yeah... (Mashpotatoes)

[@ardennielsen3761]

EGR valve + open headers = vacuum leak ? ? ?

[@joelnavarrete7347]

Last time I was this early, jasmin wasn’t even wide bodied

[@nuclearism36]

can`t wait to see it again but in 1080p

[@ahora6197]

Every video is soo good. -Mashed patatoes

[@sasohribernik8806]

Don't forget to put the expantion tank to the highest point of the engine since you don't have a filler cap on the rad!

[@pharris1015]

When is it coming? It's been 5 months!!!!

[@HOTWaffles343]

Mashed potatoes lol I always stay till the end

[@GoonIsGone]

Any updates?

[@TrshHxntr]

mashed potatoes! excited for the s10 to run and drive, have a good day robbie!

[@essquizzy]

“Mashed potatoes” - Robbie

[@kylerbeaugrand7745]

Early love the vids man

[@cyruslever586]

I drive a subaru with basically open headers. I understand how loud it is haha

[@ervinv48]

Do you think putting a push start on a 04 Civic is worth it

[@reesevanelgort7384]

Mashed potatoes is a good source of food

[@maxinhooo9679]

Yeeees over 20 minutes 😍

[@Jordan.McDowell]

You can run the dual exhaust on the passenger side

[@NYToken]

"we have a pretty big news next week" I want to hear a really big news lol

[@brandoncrider3697]

I vote frame resto while you wait on the harness, also mash potatoes and stay committed!

[@mysterious.jackal]

Dam that sucks spent so much time building it and now ripping it apart again...😞 MASH POTATO!!!!

[@kmyers7027]

Yo! I hope you've gotten my package can't wait for you to see what I made for you! and Mashed Potatoes you secret keeper!

[@OzunaOne]

That gas pedal has me 😂😂😂 - smashed potatoes

[@brandonlouissaint2872]

Aww and the build was going as good as mashed potatoes

[@matthewbrayton8166]

That coolant passage probably goes to the throttle body.

[@scarletstreetmedia1897]

Mashed Potatoes, stay committed can't wait to see this truck going proper!

[@AdamTucker5]

Potato Mash?

[@kennyman338]

Those are steam ports to cool your heads you'll need it.

[@rubenwijtman2736]

got an notification, didnt hesitate

[@jarodhulsizer1247]

mashed potato's. been watching all the videos to the end

[@ir6303]

MASH POTATOES 🥔