I Built a Budget E-bike that Goes 30+ MPH????

  Рет қаралды 42,266

Mid Modifications

Mid Modifications

Күн бұрын

Пікірлер: 158
@hiiirome
@hiiirome 2 ай бұрын
o my gosh such a rare sight! someone who finishes his projects! great job bro
@MidModifications
@MidModifications 2 ай бұрын
Thanks bro!
@hiiirome
@hiiirome 2 ай бұрын
@@MidModifications no prob
@E-bikeguy
@E-bikeguy 2 ай бұрын
This is how I started! Building my own ebike there are fun as heck good video!
@MidModifications
@MidModifications 2 ай бұрын
Thank you so much! I put a lot of time and energy into this project and I really liked the way it turned out.
@EMNM22
@EMNM22 2 ай бұрын
You should put Orangeseal sealant in those tires or you can expect ALOT of flats! What I do Is buy the slime tubes. Then I remove the valve and replace the green slime with orangeseal. I just wash it out using really warm water, in case there is some thickened slime stuck in the tube. Hope this helps!
@MidModifications
@MidModifications 2 ай бұрын
Huh. That would help tremendously. I had a slime tube in the back but I popped it and I had to walk my bike a half mile home! I do frequently get flats, so I shall be trying your advice. Thanks!
@HenryMercer-y8f
@HenryMercer-y8f 2 ай бұрын
Cutting you frame could cause cracks but other than that sick build
@MidModifications
@MidModifications 2 ай бұрын
Thanks man. I didn't make a deal of it in the video, but I did reinforce the backside of the cut in the frame with some angle iron to prevent bending, which also doubled as my controller mount.
@radioactivelight
@radioactivelight 2 күн бұрын
The negativity in this comment is unfounded! lol
@scizorunleashed
@scizorunleashed 21 күн бұрын
I love seeing people use PMF, absolutely incredible when done properly. It's what I used on my micro camper!
@MidModifications
@MidModifications 18 күн бұрын
Sick! I found it rewarding after I had completed it because it was such a smooth surface.
@kenstrike8699
@kenstrike8699 22 күн бұрын
Have literally built dozens of bikes, I think this bike build looks good, it looks fun, just enjoy it. Just scoot on past the naysayers, have fun and I enjoyed your video
@MidModifications
@MidModifications 18 күн бұрын
Thanks bro that means a lot!
@radioactivelight
@radioactivelight 2 күн бұрын
I want to see a four-wheel-drive electric gocart with four wheel independence, suspension, and a motor on each wheel!
@MidModifications
@MidModifications 2 күн бұрын
I can do that once I get a lil more money lol
@FE-RoadRunner
@FE-RoadRunner 2 ай бұрын
Instand subbed. Your channel is gonna go far.
@MidModifications
@MidModifications 2 ай бұрын
Thanks, that really does mean a lot to me.
@JackPotts-sf1my
@JackPotts-sf1my 5 күн бұрын
Can you put a link to the wheel and the battery in the controller so I can get it?
@mugensharp
@mugensharp 2 ай бұрын
The frame cut tho XD. good vid dog. I wouldn't ride around on that thing to much though. That heat doesn't have anywhere to go, could end bad.
@MidModifications
@MidModifications 2 ай бұрын
Alright, I'll do something about the battery. You guys do bring up a really good point though because I didn't think of heat dissipation. Thanks bro.
@legoMechanics-09
@legoMechanics-09 2 ай бұрын
looks great i also like e bikes and love making them pls make more e bike vids in the future.
@MidModifications
@MidModifications 2 ай бұрын
Bro my dream is to build a Surron from scratch. I just dont have enough money for that right now lol.
@legoMechanics-09
@legoMechanics-09 2 ай бұрын
yeah i hear you keep working hard
@WiPZ0rGaming
@WiPZ0rGaming 21 күн бұрын
i have the same exact kit down to the grips, 19k kilometers and it still goes strong, also shunt modded and pulls about 45 amps/2.2kw from the battery at 48v, good cheap kit, the controller could have the 3 speed switch function but it just doesn't have wires to it, gets me up to 42mph now, all in all great video dude!
@MidModifications
@MidModifications 18 күн бұрын
Dang How long does the battery last after you shunted it? I wanted to do that mod but I din wanna mess anything up
@WiPZ0rGaming
@WiPZ0rGaming 18 күн бұрын
the current draw went from 27amps stock to i had it at a maximum of 74amps, thats around 3.5kw, had to turn it back down to 45amps so my battery can breathe, the max range of your ebike will surely change but as long as you dont go all out and hit that max draw your range shouldn't take that big of a hit, just make sure your battery cells/bms can run that amount of power without starting a fire. Also motor heat will be a big issue in the summer without any mods.
@YTOnlineReviews
@YTOnlineReviews 2 ай бұрын
such a amazing and rare sight.
@tanishsetia4174
@tanishsetia4174 Ай бұрын
Could u plz give websites where u bought everything from 😅😊
@MidModifications
@MidModifications Ай бұрын
Im sorry for the late response, I didnt see this comment until just now. Motor: www.ebay.com/itm/175398867248 Battery: www.ebay.com/itm/355791684097?var=624868478314
@Spykersan
@Spykersan Ай бұрын
Not bad. I do worry a little about heat dissipation for the battery. I don't know how hot this particular one might get but adding a basic heatsink should help ensure it gets the job done. Cutting into the frame is a bit iffy too. Some welding of the battery frame to the frame could help with overall stability but that's also a whole other thing right there. It's not a significant chunk out of it so it should be fine but frame work is always hit or miss with modifications.
@MidModifications
@MidModifications Ай бұрын
Yeah I have been getting a lot of comments about heat dissipation. I think that it should be fine, but just as a precaution I was planning to add some sort of heatsink or air cooling system just in case. The frame cutting was a bit sketchy too. I added reinforcement to the back of the frame where I cut it, so Im not worried about that one as much.
@Darklait
@Darklait 25 күн бұрын
E bike that goes Brrrrrr is the only thing i heard
@Bs.zay.
@Bs.zay. 2 ай бұрын
saw my bs.zay bike lol good video!!!!
@MidModifications
@MidModifications 2 ай бұрын
Thanks man! I wish I could wheelie like that, I'm still practicing.
@danielyaseen
@danielyaseen 3 күн бұрын
Just a quick note, NEVER cheap out on the battery. While in this case he seemed to be fine, a lot of the time, the cheaper batteries are not tested and use really cheap components, which can be flammable and destroy your creation, or even worse, hurt you.
@Bo0O.0om
@Bo0O.0om 29 күн бұрын
700th subscriber🎉
@MidModifications
@MidModifications 28 күн бұрын
I got you bro!
@ben_headley99
@ben_headley99 Ай бұрын
Really good video. Edited and thought out really well.
@MidModifications
@MidModifications Ай бұрын
Thanks man, I really appreciate that!
@somebody9348
@somebody9348 20 күн бұрын
Subbed as soon as i saw this, can you give us the items and where you bought it from?
@JCEMEGA
@JCEMEGA 2 ай бұрын
100th subscriber 🎉🎉🎉
@MidModifications
@MidModifications 2 ай бұрын
YEAH I HIT 100!!!!! I'll give you a shoutout in the next vid.
@JCEMEGA
@JCEMEGA 2 ай бұрын
@@MidModifications you sir are amazing thanks !
@jonasmeier417
@jonasmeier417 Ай бұрын
Never cut the frame! Why not putting the battery on a rear rack?
@MidModifications
@MidModifications Ай бұрын
I wanted it to look visually appealing. A battery on the back in my opinion is ugly
@Elihoffs95
@Elihoffs95 2 ай бұрын
Great video as always Mr. Mid
@MidModifications
@MidModifications 2 ай бұрын
Yussuh
@alexhur1319
@alexhur1319 2 ай бұрын
great video man i have a ebike called the mate from 5th wheel and i dont like on how fast it goes, breaks or suspension this just gave me a whole lot of insparation to mod it and beef it up. Btw you produce videos like you have 500k good video dude!
@MidModifications
@MidModifications 2 ай бұрын
Thanks bro! Yeah go nuts modding out your bike, it feels real rewarding making things go faster.
@Nathan-In-Recovery
@Nathan-In-Recovery Ай бұрын
great job !
@MidModifications
@MidModifications Ай бұрын
Thanks man!
@samuelcotnoir2705
@samuelcotnoir2705 Ай бұрын
I know nothing to building bikes…. I would work more as a nurse to just buy one! Great vid tbh!
@MidModifications
@MidModifications Ай бұрын
Thanks man. I'm sure you could build one if you wanted to :)
@faizanali2947
@faizanali2947 2 ай бұрын
We need a more detailed step by step tutorial please
@MidModifications
@MidModifications 2 ай бұрын
If I have time I'll try to make you one.
@Yes-sw8gh
@Yes-sw8gh Ай бұрын
Never ever cut into a frame, especially not with the torque you're putting on the frame afterwards. You should've just figured out what measurements you needed before you bought that tiny mountainbike.
@MidModifications
@MidModifications Ай бұрын
Fair point. Next time I wont be cutting my frame lol.
@stingray1047
@stingray1047 Ай бұрын
I’m pretty much doing the exact same thing but I already have the bike so this vid is really helpful 👍
@MidModifications
@MidModifications Ай бұрын
Good for you! I hope your project turns out well
@mattesrosner100
@mattesrosner100 24 күн бұрын
ayo, love the build, would it be possible to mount that motor wheel as the front wheel?
@MidModifications
@MidModifications 8 күн бұрын
Yes it would! I just wanted a rear wheel so I could wheelie
@jhhgaming7294
@jhhgaming7294 13 сағат бұрын
1:50 how do you do the photo
@MickyBee73
@MickyBee73 Ай бұрын
Well on you for doing a 'self-build' 👍 They are sooo much fun! I'm not a massive fan of the whole battery/frame modifications you did, but hey it's not that bad, and hopefully the frame won't break on you. I would've mounted the battery the other way, and put the controller inside the frame too (but hey, we're all different). But overall you did great & it looks pretty cool too. About 18 months ago I did a self build too, using a 26" Scott mtb & 1500w Voilamart kit with a 52v20ah triangle battery (fits perfectly inside the frame) and I love it... I hope you and your self built e-beast have many a great journey, all the best my fellow e-builder/biker!!! ⚡🚲⚡ 👍👍👍 Maybe get some Schwalbe (marathon) tyres for it, and a suspension seat-post, makes a massive difference to ride quality and with the Schwalbes I've done over 6000 miles with zero punctures.
@MidModifications
@MidModifications Ай бұрын
Woah I could definitaly use some better tires cause mine constantly go flat. Like every 2 hrs. A suspension seat would be good too, I could get on using that. Thanks for your advice!
@MickyBee73
@MickyBee73 Ай бұрын
@@MidModifications you're welcome, and the Schwalbe 'marathon' not even the latest ones, as I bought these around 2 years ago...they are amazing tyres, after 6000+ miles they still grip excellently and I've had zero punctures, I also use Schwalbe inner-tubes with the tyres... The inner tubes are cheap (around £5 each) and I think I only paid about £45 for the two 26" x 1.50 wide tyres.. they are also great for speed too and work great in the wet as well as the dry... Can't rate Schwalbe tyres highly enough.. I'm doing a 3000w build in the next few months (if I can save enough😅) and I'll definately be putting Schwalbes on it, but I might try the newer 'marathon plus' version.. Apparently the 'marathon +' have a slightly thicker inner anti-puncture lining in them than the standard 'marathon' as in the Schwalbe tyres they have what's called 'green guard' anti puncture lining inside them, amazing tyres ⚡🚲👍
@wrryuo1245
@wrryuo1245 Ай бұрын
What if i just wanted to ride it normally, i don't see any on and off button or even a key
@MidModifications
@MidModifications Ай бұрын
The on button is on the display. I do sometimes ride it like a normal bike, but then I feel lame pedaling when I dont have to.
@Riots32
@Riots32 2 ай бұрын
Nice job, good vid, nice editing, awesome thumbnail and is entertaining, which I was as good as you lol!
@MidModifications
@MidModifications 2 ай бұрын
Thank you. I put a lot of time into this video and Im glad you enjoyed it!
@lucifermorningstar3714
@lucifermorningstar3714 Ай бұрын
can u make a full tutourial step by step
@MidModifications
@MidModifications Ай бұрын
Possibly. Im in the middle of another project rn so it wouldn't be immediate.
@lucifermorningstar3714
@lucifermorningstar3714 Ай бұрын
@MidModifications wow , I'll wait for a few months , I'm really glad you saw my message
@nachobusiness4355
@nachobusiness4355 2 ай бұрын
Build a crazy cart
@MidModifications
@MidModifications 2 ай бұрын
Ok bud, I shall put forth an effort to do that :)
@blazee_gt3755
@blazee_gt3755 21 күн бұрын
i subbed gangy
@acasualminecraftplayer270
@acasualminecraftplayer270 2 ай бұрын
super nice video for a channel with not a lot of subs!
@MidModifications
@MidModifications 2 ай бұрын
Thanks man! Im trying to get up there in subscribers.
@ConorBaughmam
@ConorBaughmam Ай бұрын
What brand is the motor and controller?
@MidModifications
@MidModifications Ай бұрын
Viribus Its a cheap ebike parts manufacturer
@Casp3r.aka.Droid.
@Casp3r.aka.Droid. 2 ай бұрын
Only problem is it doesn't look super clean.
@MidModifications
@MidModifications Ай бұрын
You don't think so? How could it be cleaner?
@NeidasPocys
@NeidasPocys 22 күн бұрын
what size is that frame i want to build something close to that but i down want to cut the frame
@MidModifications
@MidModifications 22 күн бұрын
Its a small frame. Idk the inches or anything but I remember that it is size small
@Votexingtimes
@Votexingtimes 2 ай бұрын
can you tell me where you got all the parts for the ebike
@MidModifications
@MidModifications 2 ай бұрын
Here are the links to the electronics. Battery: www.ebay.com/itm/355791684097?var=624868478314 Motor kit: www.ebay.com/itm/175398867248 I hope this helps you out and hit me up with any more questions. :)
@harloss9839
@harloss9839 2 ай бұрын
cutting the frame so it buckles and bites into your battery? great idea...
@MidModifications
@MidModifications 2 ай бұрын
Im starting to think I should have included this in the video, but I did reinforce the frame after I cut it. I didn't want it to just die on me after I rode off a curb or something.
@toughfeller1141
@toughfeller1141 Ай бұрын
what wheel size is that mountain bike?
@MidModifications
@MidModifications Ай бұрын
26 inch wheel.
@rohanjukes
@rohanjukes 25 күн бұрын
plessss make more content
@MidModifications
@MidModifications 24 күн бұрын
You got it!
@ironpr
@ironpr Ай бұрын
How do you take out the batteri to charge it?
@MidModifications
@MidModifications Ай бұрын
The battery had a built in charging port, so I just cut a hole in the canvas and made a plug so I can plug the charger into the side of the bike
@ironpr
@ironpr 21 күн бұрын
@@MidModifications thats kinda cancer no?
@huetrwiny
@huetrwiny 26 күн бұрын
you should make a custom mini bike
@MidModifications
@MidModifications 26 күн бұрын
That is actually the plan for the next video
@huetrwiny
@huetrwiny 25 күн бұрын
@@MidModifications W, also i watched ur videos ur super underrated keep up the good work 🤑🤔😯
@RemyArmstrong-c8y
@RemyArmstrong-c8y Ай бұрын
How do you charge it just wondering
@MidModifications
@MidModifications Ай бұрын
The battery came with a charger.
@tbull1545
@tbull1545 2 ай бұрын
this is a death trap. cutting the frame then covering a battery that heats up with poor mans carbon fiber is insane. there is no where for the battery to dissipate heat.
@MidModifications
@MidModifications 2 ай бұрын
Heat dissipation. I didn't think of that when I was building this. I will be sure to consider that in the next build I do that had a big battery in it.
@E-bikeguy
@E-bikeguy 2 ай бұрын
If he's not over working the battery it will not even get warm let alone hot
@acasualminecraftplayer270
@acasualminecraftplayer270 2 ай бұрын
are you making a new project? i really want to see a new video!
@MidModifications
@MidModifications 2 ай бұрын
I am in the midst of building another creation. I wont say too much but this build will also go 20+ mph!
@acasualminecraftplayer270
@acasualminecraftplayer270 Ай бұрын
@@MidModifications sick!
@BalajiKatabathina-r5d
@BalajiKatabathina-r5d 2 ай бұрын
How much cost bro
@MidModifications
@MidModifications 2 ай бұрын
Like in total for everything? $420 for the original bike and $80 for the upgraded forks.
@BalajiKatabathina-r5d
@BalajiKatabathina-r5d 2 ай бұрын
@@MidModifications Indian carency tel me sir
@MidModifications
@MidModifications 2 ай бұрын
35,000 rupees
@BalajiKatabathina-r5d
@BalajiKatabathina-r5d 2 ай бұрын
@@MidModifications tq sir
@toughfeller1141
@toughfeller1141 Ай бұрын
hope that frame wont snaps
@MidModifications
@MidModifications Ай бұрын
Ikr. I added support on the back and so far its held up nicely, and I will admit I've takin it off some big jumps.
@toughfeller1141
@toughfeller1141 Ай бұрын
@MidModifications Dont test it by risking ur life man.
@Timberius
@Timberius 2 ай бұрын
Cutting the down tube is stoopid! 🤣🤣🤣🤣🤣 You should have bought another bike.
@MidModifications
@MidModifications 2 ай бұрын
It had held up pretty well so far. I did realise that cutting the tube was a dumb idea so I added a support on the back of the cut tube, I just didnt show it in the video
@Better_History
@Better_History 25 күн бұрын
BRO theres no way you spend hundreds of dollars and months on videos with just 3k subs, your literally gonna have 50k by the end of the year
@MidModifications
@MidModifications 24 күн бұрын
I hope to Imo. Thx for the encouragement tho!
@thewaffle3945
@thewaffle3945 Ай бұрын
having 2t engine for about 200$ with few mods about 100$ and having it go 47mph is way more fun than e bike
@MidModifications
@MidModifications Ай бұрын
Wont lie that does sound fun. Gas is just too loud for me thought. My neighbors might give me a noise complaint.
@thewaffle3945
@thewaffle3945 Ай бұрын
@@MidModifications stock muffler without any mods is about 80-95db loud so neighbours shouldnt have problem with that
@Motivif
@Motivif 28 күн бұрын
How do u charge it
@MidModifications
@MidModifications 27 күн бұрын
The battery came with a charger. I just glued the charging port to the outside of the bike.
@LoneLxstify
@LoneLxstify 24 күн бұрын
5:08 who sees that bug (first bug comment)😊
@Profile-pictureX
@Profile-pictureX 14 күн бұрын
I saw it
@MidModifications
@MidModifications 8 күн бұрын
Lol I went back and watched that part. Idk where the bug came from, im just glad it didnt get stuck in the glue
@ConnorCanRead
@ConnorCanRead 20 күн бұрын
Who sold a chris king headset for $50?? What is your used bike market like?
@MidModifications
@MidModifications 8 күн бұрын
Ikr I just bought it on offerup
@ianmangham4570
@ianmangham4570 2 ай бұрын
Why would you butcher the frame 😮
@MidModifications
@MidModifications 2 ай бұрын
I didn't rly have a choice. I wasn't gonna put it sideways and the only other option was to cut the battery lol.
@ianmangham4570
@ianmangham4570 2 ай бұрын
@@MidModifications Just have it at an angle inside frame
@ianmangham4570
@ianmangham4570 2 ай бұрын
​@@MidModificationsMaybe next time buy a bottle 🍼 type battery 😅💯🙏
@MidModifications
@MidModifications 2 ай бұрын
I would have cause they fit much better but it was like $40 more to get one.
@-NITRA-
@-NITRA- 2 ай бұрын
is it waterproof tho?
@MidModifications
@MidModifications 2 ай бұрын
I mean I haven't tested it but I could probably withstand like rain or something. Not being completely submerged though.
@-NITRA-
@-NITRA- 2 ай бұрын
Oh alt Thx for answering soo fast
@MidModifications
@MidModifications 2 ай бұрын
For sure!
@ecocentrichomestead6783
@ecocentrichomestead6783 8 күн бұрын
Regardless of current teenage word salads, "sick" is still a negative term.
@MidModifications
@MidModifications 8 күн бұрын
Ok mom Jk, you do sound like my mother tho
@Calthecool
@Calthecool 2 ай бұрын
I wouldn’t trust those cheap blue rectangle packs, they are known for poor build quality. Also cutting aluminum with a normal cutoff disk will cause aluminum to melt into the blade and potentially overheat the blade and make it explode. However I’ve personally done it before and taken it slow and it hasn’t happened to me yet, but it’s just something to be aware of. I’d like to see a 72v build, I also built a 48v bike as my first bike and thought it was fast, but a good 72v bike is on a whole different level. Try to get a good triangle pack so you don’t have to massacre the frame.
@MidModifications
@MidModifications 2 ай бұрын
Yeah I want to make a 72v build as well. I really didnt want to cut the frame, but it was either cut the frame or cut the battery lol. I was looking into the triangle packs but they were a tad more expensive than the rectangle ones and I was short on money at the time. I will also remember not to cut aluminum with the normal disk, thank you for that!
@Ant23.11
@Ant23.11 2 ай бұрын
Wheelie it bro
@MidModifications
@MidModifications 2 ай бұрын
Bro Im still practicing. Its harder than I thought it would be.
@Ant23.11
@Ant23.11 2 ай бұрын
@@MidModifications I might build this to wheelie. I keep getting in trouble on my dirt bike ion mind 20 mph wheelies
@Ant23.11
@Ant23.11 2 ай бұрын
​@@MidModificationsHow easy does the wheel come up
@MidModifications
@MidModifications Ай бұрын
Its hard to pop it up. It doesn't have a ton of torque, so you have to pull up real hard to get it to come up.
@ЕвгенийТихомиров-р1ж
@ЕвгенийТихомиров-р1ж 2 ай бұрын
7:25 I swear bro if the video ended there
@MidModifications
@MidModifications 2 ай бұрын
Ik bro I did that just for you
@ELY3M
@ELY3M Ай бұрын
Build electric bmx bike with single speed.
@MidModifications
@MidModifications Ай бұрын
What do you mean single speed? Bmx bikes dont generally have gears.
@ELY3M
@ELY3M Ай бұрын
@@MidModifications I meant no gears and debriller and only 1 chain
@MidModifications
@MidModifications Ай бұрын
@@ELY3M Ok I got it :)
@ruggericci
@ruggericci 2 ай бұрын
wouldn't ride it, that frame is fucked.
@MidModifications
@MidModifications 2 ай бұрын
I did reinforce the frame where I cut it, I just didn't include it in the video.
@DA-jw6nm
@DA-jw6nm Ай бұрын
"any good engineer would do". sorry, NO engineer would cut the frame and place the battery at the (now) weakest section of the frame. serious fail!
@ironpr
@ironpr Ай бұрын
Blah blah blah
@MidModifications
@MidModifications Ай бұрын
Lol.
@MidModifications
@MidModifications Ай бұрын
I wont deny it was kinda a sketchy operation and I dont think I'll be doing it next time, Its held up nicely.
Building a 10,000W Hyper Ebike (Tesla Battery)
15:02
Calthecool
Рет қаралды 180 М.
I Converted a Nerf gun into an AIRSOFT gun
5:52
Mid Modifications
Рет қаралды 9 М.
REAL or FAKE? #beatbox #tiktok
01:03
BeatboxJCOP
Рет қаралды 18 МЛН
Cat mode and a glass of water #family #humor #fun
00:22
Kotiki_Z
Рет қаралды 42 МЛН
I Built an INSANE Electric Mini Moto (+60mph!)
21:19
Sur Ronster
Рет қаралды 7 МЛН
3D Printed belt bike conversion
5:30
Westloki
Рет қаралды 30 М.
I Bought the Cheapest and Most Expensive Electric Bike kits on Amazon
22:29
Bikes and Beards
Рет қаралды 2,4 МЛН
HUGE Power Upgrades on my DREAM SCOOTER
30:07
Two Stroke J
Рет қаралды 3,1 МЛН
I Built an INSANE Mini Drift Cart
11:08
Mid Modifications
Рет қаралды 579 М.
163 Bicycle Hacks and Tips for Everyone
1:48:47
Berm Peak Express
Рет қаралды 962 М.
I BUILT the CHEAPEST 1000 watt D.I.Y E-Bike on AMAZON
12:59
Dude Stuff
Рет қаралды 61 М.
Powering an E-Bike using Disposable Vape Batteries
14:21
Chris Doel
Рет қаралды 1 МЛН
I Built a 15,000W eBike and it's WAAAAY Overpowered
10:00
Gaius Garage
Рет қаралды 566 М.