I Built a Diamond Playbutton Bass - Pinoy Guitar Builder

[@Fernos005]

That pickup is next level 👍👍👍👍 love your use of inexpensive tools to get the job done A++++

[@GitaraMaker]

Thanks J Kelly!

[@obrev4633]

Great job man! Ang ganda ng bass, ang ganda din ng pagkalaro mo. Keep up the the good work!

[@GitaraMaker]

Salamat bro!

[@geddeeee]

That pickup sounds great!!!!

[@andespenser3017]

That's both a beautiful bass and a beautiful tribute. I hope he sees this.

[@GitaraMaker]

Thanks!

[@ConstrutorMusical]

Great work. Just found your channel. Subscribed!

[@GitaraMaker]

Thanks @Luthieria De Pobre!

[@pedrodocusse2907]

let's flood in comments of davie for him to see

[@GitaraMaker]

Davie on his Community post: "Ask me anything and I might answer you in the next video" Me: have you seen the Diamond Bass Playbutton for the God of Slap? Thanks bro, I really appreciate this 😊

[@APineda2008]

I just subscribed to your channel. Very interesting kase lahat ng mga videos mo. Nasa Pinas kaba?

[@GitaraMaker]

Salamat po! Yes nasa Pinas po ako.

[@APineda2008]

@@GitaraMaker Where do you buy your guitar hardware? Thanks

[@GitaraMaker]

I bought everything online, if you're from our country Lazada and Shopee from brands like Musiclily and Guyker.

[@APineda2008]

@@GitaraMaker thank you so much 🙏

[@wadeguitar9513]

Lupet ng mga build bro, di rin papahuli ang mga pinoy sa pag gawa ng malupit na gitara. Congrats Idol.

[@GitaraMaker]

Salamat @William de Guia!

[@cartoonliker4666]

Great design of a bass guitar. Great masterpiece!!😉👍

[@kwajtube]

Very nice build. I'd love a video tour of your CNC. Salamat po.

[@GitaraMaker]

Thanks! I really want to make a video tour and how I use my CNC, because a lot of people are interested with my CNC.

[@gabrielebellenghi5551]

This was simply spectacular!

[@GitaraMaker]

Thanks!

[@n0zferattu]

EPICO! A P P R O V E D

[@johnalmaden7361]

Always a great craftmanship kuya :)

[@GitaraMaker]

Salamat bro! Sinisimulan ko na yung bagong guitar 🎸

[@chris197761]

This bass guitar built is epic, slap like now.

[@danimasso3789]

Wow, esa pastilla es una obra de arte! 👏👏👏

[@ronaldramos879]

Sir grabe Ang mga inaapply mo idea sa pagbuild ng guitars..Ang mga diy n cnc at iba.. grabe sir.. dream q din mkabuild kso anggang project guitars lng aq..nkakabilid tlga mga obra mo

[@GitaraMaker]

Maraming salamat po!

[@lassievision]

That's so awesome. Epic guitar build right there. Even more impressive is all your DIY tools! Hope lots of people see this!

[@GitaraMaker]

Thank you @Lassie Vision! I do hope so

[@andrewlipic8414]

A bass made out of pine for a 10M platinum play button, love it. Lol That pickup that you made is ridiculous! Love the way you carved all the angles. One of these days, I'm finally going to get around to making my own guitar and bass. I'm not sure that I would try to sell them, I just think it would be awesome to have a bunch of them at my disposal to pick up and play whenever I want

[@GitaraMaker]

About the "Pine" it's a long story lol. Oct Covid hit me and fam, recovered Nov. Run out of funds, use my last money + pressure of Davie hitting 10M. All of the guitar and bass I built are hanging in our living room wall, and soon I'll run out of space haha. I might sell some of them to my friends cause my wife might throw them away one day lol. Thanks for leaving a comment Andrew, I really appreciate it!

[@plhtla2772]

😍😍😍😍 Beautiful bass

[@GitaraMaker]

Wow thanks @plhtla ☺️

[@brickswithbros2049]

The pickup is insane!

[@GitaraMaker]

Thanks!

[@EmmanuelB]

That pickup is next level!

[@GitaraMaker]

Thanks 😊

[@cactus_junk]

WORLD CLASS!!! WE'RE SO PROUD SAYO IDOL THANK YOU 🙏😊

[@BudoReflex]

Bass is great, playing is fantastic!!! 😁

[@GitaraMaker]

Thanks 😊👍

[@Cpt.RedBeard-v4l]

Epic! Аплодирую стоя👏

[@GitaraMaker]

Thanks!

[@clarkninog.santos7967]

Underrated channel galing😮

[@GitaraMaker]

Salamat po!

[@andycpd6669]

Awesome design, love what you did to the body, you should watch crimson guitars he does some cool looking guitars too

[@kennnnnnnnnnneh3687]

you even play the S L A P P at the end...epic

[@GitaraMaker]

I couldn't play further, it's really hard. I should practice like Davie 48hrs a day.

[@Kobby12]

That's so beautiful and amazing 👏..your works are way different from others and I really admire them ❤ ♥..much love from Ghana 🇬🇭

[@jesterariola9624]

Galing talaga 🔥🔥🔥

[@GitaraMaker]

Nice! Salamat Jester!

[@projectdiy985]

The pinas karin pala bro. Galing ah. Hilda rotary gamit mo pang CNC . At ang CNC mo sariling gawa mo ! Grabe lupet

[@GitaraMaker]

Oo bro. Lupet nung Hilda, kayang 3hrs straight na umaandar, hinihintay ko ngang bumigay hehe

[@projectdiy985]

@@GitaraMaker gumagawa rin ako ng guitar, nga lang sa ibang channel ko.. kakaumpisa palang, sakin ginawa kung router yung hilda... Ayus. May mga bagong natutunan na naman ako dahil sayu.

[@GitaraMaker]

Nice! Ano pangalan ng isa mong channel?

[@colb999]

I love watching your builds. Your craftsmanship is excellent, and I love the way you use both traditional hand tooled approach and the CNC in tandem. I'm very impressed and I hope Davie (I subscribe to his channel too) gets to play it and enjoy it.

[@GitaraMaker]

Davie noticing this video would be amazing, playing the bass I made - that would be something out of this world. Thanks for your comment Col B

[@Me-qp8vz]

@@GitaraMaker Hey I just sent a link to Davie504 showing him one of your custom basses. Lets hope he take his head out of his arse long enough to look at it!

[@murmur3966]

Hello Hello From Canada!!! Incredible work on that beauty. Every time I check out one of your episodes, you blow me away with making another really cool pickup that you create so easily. I don't know if anyone has asked you this yet, but if Davie contacted you would you want to gift the guitar to him?? I think you would blow his mind to if he saw your work. Keep up the awesome content my friend and I can't wait to check out more episodes. I hope you and everyone near or dear to you says safe, stays healthy and you all are as happy as you possibly can be. 🤘😁👍

[@GitaraMaker]

Thank you! No, Davie has not contacted me and Yes I would definitely give it to him. I appreciate your encouragement and kind words, this will fuel me to make better content. Have a good day ahead of you stay healthy and safe.

[@leopoldofernandezjr.508]

Omg! Approve!

[@dapussifier]

Ganda! Davie504 pa name 🤘😎

[@GitaraMaker]

Salamat Mr.Worldwide! Tribute sa malupet na Bassist ☺️

[@bluespleasure]

Wow. All of your videos are inspiring and stuning. Did you build your CNC router? If yes, could you please leave some guidance for me ?

[@bullet1218]

Wow Awesome...💯👍

[@GitaraMaker]

Thanks!

[@lsddark2]

OMG!!! EPIC!!!

[@vangelismoraitis]

Check mate guitar and bass makers!

[@jamesh5460]

Nice!

[@Pure_KodiakWILD_Power]

Niiiiice 👍

[@THX-vp9fz]

i would like to spend some of my lifetime to learn at this luthier. Plus i think every bassist/guitarist should watch one or two of those videos to realize how much work and skills are in one instrument. Couldnt harm. ;)

[@GitaraMaker]

Thanks THX 4488! I'm really fascinated how an instrument works and that led me to building one and now it never ends. Thanks for leaving a very nice comment, I have a lot of guitar ideas for this year.

[@guitargeek6182]

OMG!!! Mind Blowing!! I'm not sure Davie504 deserves such a unique bass, though. Now he will have to slap on it like crazy. I mean more crazy than usual...

[@GitaraMaker]

Thanks GuitarGeek!

[@Me-qp8vz]

Davie is an egomaniac unless the bass has his name on it he won't acknowledge it. A shame really. Davie's only let down is his ego....

[@littlebighorn2008]

wonderfool job

[@insolacion1978]

My god !!! Beutiful

[@syrefpudenismail3410]

Alright!!

[@UrbanTreats]

Awesome build, Ive been watching your videos, did Dave get the bass? Also, do you take custom orders?

[@GitaraMaker]

Thanks Urban Treats! No I did not contact Davie, this is just a small gesture to congratulate him. Noticing this from Davie will be awesome. As of now I'm not taking orders, I might sell some of my future builds.

[@UrbanTreats]

@Gitara Maker You should tell everyone to tag dave so be sees your amazing creation 😉

[@CREPOZOIDES.LE.MORBIDES]

[@lucybarney1]

Amazing

[@johnmeynardvillarroel4129]

ang banges papi solid gawa mo

[@GitaraMaker]

Salamat bro 👍

[@johnmeynardvillarroel4129]

ask ko lang self thought ka lang din ba sa paggawa? gusto ko sana magtry ng mga kit eh kaso wala ako alam sa wood working

[@GitaraMaker]

Yes bro self thought lang ako. Kaya mo yan lakasan lang ng loob, yung 1st guitar na ginawa ko nung 2007 drill, lagare and mga paet pa lang gamit ko. Nakaka-adik gumawa ng gitara hehe. Check mo bro yung Instagram ko "Gitara Maker" din, nandun yung mga ibang guitars na wala sa KZbin.

[@johnmeynardvillarroel4129]

will do thanks bro... di kasi ako maalam sa paglagare saka paint2 parang gusto ko lang i-try hehe

[@FunkyFlo]

EPIC! When is Davie gonna reveal it on his Channel??

[@GitaraMaker]

No bro, this is just my version of his Diamond Bass Playbutton. I think what Davie is going to do is make a bass out of his real diamond play button.

[@bustabass9025]

Great project. I dunno...something about the drab color of the body against the natural beauty of the fretboard kinda mutes it somewhat. Almost like ordering a Mercedes with a beautiful natural wood and leather interior, then painting the exterior army tank green. Perhaps a natural wood stain would have been more complimentary. 🙁

[@emman3746]

ganda tunog idol!!!!

[@GitaraMaker]

Salamat bro 😊👍

[@AaronJohnProduction]

bro ask ko lang pano ba wiring ng series sa jazz bass pickups

[@GitaraMaker]

Hello bro! Honestly, electronics is not my forte, nangongopya lang ako ng wiring diagram from Google. You can search for Jazz Bass Series wiring diagram, check mo yung images. Thanks for dropping a question bro!

[@PRScustom]

Pinoy in Florida. I saw your build of Ibanez epoxy. What's the weight

[@GitaraMaker]

The Ibañez Resin is at 3.5 kilos, I weighed a standard LP and it's the same.

[@jobertramirez119]

How much is it to buy one of your masterpieces?

[@moreira.castilho5417]

Parabéns meu irmão por esse dom que nosso Deus lhe deu 🙏🦅🇧🇷

[@dfleon75]

👍

[@mariodwir]

SLAP LIKE NOW

[@GitaraMaker]

Yeah!

[@jmlainez]

Boss. San ka nakakabili and anong brand ng epoxy resin?

[@GitaraMaker]

Sa shoppee bro eto yung link. shopee.ph/product/104552101/4739296386?smtt=0.85237371-1642732126.9

[@jmlainez]

@@GitaraMaker Ayos!!! Thanks bro!

[@lomobster]

Have you got into contact with Davie504 yet? I would love to see him make a video on this.

[@GitaraMaker]

Hi Logan! No I haven't. That would be nice, just noticing this video from Davie will be awesome.

[@neckbridges]

Что за чудо станок фрезерный?

[@GitaraMaker]

Hi Neck Bridges! The machine is a CNC. Thanks for watching!

[@fazlichew]

I Love davie, but don't call him god, last time people call Diego Maradona was called god and look what happen to him.

[@JosePineda-jn8jk]

People can make jokes 😂 jeez

[@andrewaharder]

Lupit. saan ang shoppe mo sir?

[@GitaraMaker]

Hi Andrew, sa Cainta bro

[@April-Seventh]

with all technology around they still cannot make witeless gitar .. still using cable

[@jovanycadenas3839]

Magkano po magpapagawa nang guitara master ?

[@GitaraMaker]

Hello po Jovany! Sa ngayon po di ako nag-bbenta ng guitar, pero sa future builds meron po akong ibebenta. Salamat po for your interest

[@jovanycadenas3839]

@@GitaraMaker ang gaganda kasi nang mga gawa mo master sana mag bukas ka soon nang shop kasi pang NAMM talaga datingan nang gawa mo 😊

[@GitaraMaker]

Maraming salamat bro 😊

[@wahnacleboy]

Damn

[@Imba-gt7qi]

Haha, 504 Likes :-)

[@haosrift6530]

Sir ano fb nyo and if ever magkano magpagawa sayo?

[@GitaraMaker]

Sorry bro as of now di po ako nag-bbenta ng guitar. Pero sa mga future build possible i-auction or sell. Salamat po for watching 😊

[@filipinodoeverything7271]

Pano mag apply sa shop mo sir?

[@GitaraMaker]

Sorry bro, as of now di ako nag-hhire. Plan ko lang muna is solo work, but thanks for asking and watching.

[@gamesteramaninder1145]

Does davie know about this?

[@Me-qp8vz]

hahaha that's not Davie504. Davie doesn't have a wedding ring on his finger....

[@GitaraMaker]

Checkmate! lol

[@Lordbaccus]

2:49 sec into the video I stopped watching! Just ANOTHER BORING P-Bass

[@madi7689]

@Davie504