Рет қаралды 56,975
In today's video, I will show you how I design and manufacture this robotic arm from scratch using SolidWorks and 3D printing, as well as its programming and calibration for operation with an Arduino Nano.
Courses and online store
Order the printed model (Mexico and USA) and the STL (Worldwide) at: aurumingenieri...
Materials List:
Arduino Nano / Uno
Protoboard
Jumper wires
Allen screws 3 and 4mm
2 Micro MG90S Servo Motors
2 Large MG996r Servo Motors
LEDs
Pushbuttons
330-ohm Resistors
and
7805 Regulator
100uF 16V Capacitor
Power supply between 7.5V - 12V at 2A
or
6V 2A Power supply (no regulator or capacitor required)
Download the STL files:
cults3d.com/es...
Follow me on my social media:
Facebook: / aurum.ingenieria
Instagram: @aurum.ingenieria
TikTok: josediazmex
Contact me for business inquiries at:
ingjuandiaz6@gmail.com