I Built a MINIATURE Turbofan Engine. Assembly and Start of the Model Kit

[@MrSychnant]

Its a credit to the companies that put these kits on the market without knowing if they could sell enough to cover manufacturing costs. Good video too.

[@STEN3326]

I want to hear the noise and not music !

[@Passions]

It sounds like a cheap toy that's why the music plays.

[@jodyssey9921]

I didn't see any fuel and there are holes in the side, also don't those fans need to be balanced perfectly? Quite a bit of rattling when bolted together, real jet rpms would tear it apart, if I had to guess it only runs by the electric motor.

[@Kruzin87]

Yea as cool as it is it's not real jet engine that runs off fuel that's why the wires are coming around it to the control module that probably has batteries in it to make it turn faster and what not a real one would have alot more parts that's for sure and be crazy more expensive lol but it's still cool though if it didn't cost so much id def like to build it

[@AndreMcHenry]

This is a display model, people.... Not a functional jet engine

[@jaredcoleman5376]

@@Passionswell its a model

[@georgegregg9795]

That is very very cool. I was a mechanic at United Airlines engines. I moved all over the shop. Tear down and building. All the different engines.

[@larz46north18]

ya . allison 250c20 hot end inspection Next. 👨‍🔧

[@alextag79]

Let's face it. For a split second we hoped it would work on kerosene!!! Another great assembly! Good boy!

[@MayorMcheese12]

Fr i want a functional model! Nothing more satisfying than it actually functioning after you’ve put it together.

[@saltuha]

I hoped for this until the last moment!

[@aliciachapman2956]

Did u just call him good boy?

[@aliciachapman2956]

Weirdo

[@mazillaplays]

@@aliciachapman2956like a dog 😂

[@elliot8595]

Wow really well filmed. I did actually think it was going to fire up and actually work though.

[@wallacelarry1813]

This is only meant to be an open engine to show all working parts, when you see all the compressor blades these would all be enclosed since this is where massive pressure is built, then massive air and exhaust pressure is blasted through rear blades which turns front fan, for control of all this you would need much more electronics, and everything would be sealed, but this is so impressive for a see through working turbofan engine

[@lalogreiner]

Exactly, it's about showing the principle!

[@davidstorm398]

You would need jet fuel and a fuel pump and oil for the bearings and an oil pump and a ignition source and ignitors and a starter and an air source and...

[@jeffery7281]

The kit is so great, exactly the same as how the actually engine will be assembled. Also they cleverly utilized the accessory gearbox, not transmitting torque from the tubine to the gearbox but instead reverse it to transmitting the torque of the electric motor to the engine rotor. Great design!

[@isaacstewart2527]

Absolutely incredible build, looks amazing

[@yman4918]

Ahw!!! For a minute there I thought it was going to be a real mini GE turbo fan engine. 😞 😥

[@leedeerman]

I’ve just had this delivered. Incredible kit. Can’t wait to build.

[@tonybarnes3658]

Gorgeous model. Great to see the fan, compressor, and turbine. What a shame it runs on batteries and not kero! Love the smell of burning kero on the flightline. Bloody expensive but a lot of work in all those parts

[@danielsanbsas]

¿esto es solo un modelo ? evidentemente funciona a aire pero ¿sirve para un rc ?

[@danielsanbsas]

y no entendi los dos ultimos barrales que no se lo que controlan

[@8kigana]

@@danielsanbsas just a stand alone model for display because if you noticed, the plastic parts wouldn't work for kerosene.

[@michaelkovalenko1429]

What a beautiful video for mechanical enthusiasts! Expensive toy, but I'm thinking of buying it.

[@warlordspartan]

I also built this engine it takes sometime but everything fit direction were excellent the sound is great

[@oscar90210]

Wow! You couldn’t make it easier. Thanks for sharing 🙏🏻

[@proteusnz99]

What beautiful engineering.

[@patricklastname5646]

Fantastic kit!

[@southernman523]

The best part was so badly spoilt. To listen to the engine come to life

[@Zooumberg]

It's not a real engine. Did you see the last part he put on, the black part. That's actually a small electric motor that turns the engine and it's probably running on batteries. Did it not occur to you that he didn't put any fuel in it. You can also see a cutout in the compression chamber so you can see the blades spinning.

[@5eleven]

Now we need a suitable jet for that engine🤠

[@crackerbarrel6965]

So it’s essentially an electric motor that shows how things spin around.

[@Skyprince27]

Yes, all that machining & money and it doesn’t even burn anything; what a waste.

[@crackerbarrel6965]

@@Skyprince27 That’s what I thought when seeing how precisely machined it is, all kinds of hardware to insure it’s held together correctly, then you add amperage with a cool little “throttle” and all it does is hum and spin all those parts around. Oh well, to each his own. I mean, how long at looking at blades spinning around until you’re bored and it ends up in the closet cuz I bet it wasn’t cheap either.

[@Skyprince27]

@@crackerbarrel6965 Probably if you have $5000 to spend on a birthday present for your 12-year-old son or daughter who want to grow up and build jet engines, it would be just the thing.

[@RGF56]

@@Skyprince27 Machining for $89 USD ? 3D printing I think 😉

[@Skyprince27]

@@RGF56 It’s obviously all cast & machined aluminum and must cost about $5k

[@RustyInventions-wz6ir]

Wow. This engine is on another level. Good job

[@trevorsmith4881]

Also $1000

[@masterpooshi6031]

Why is it a good job? He didn’t build anything. He just put together the pieces. Someone else built it.

[@d.b.1176]

Looks cool, the poors are complaining bacause the site doesn't accept EBT.

[@raphael0208]

I think this is the coolest thing I have ever seen in my life

[@vmaxmadness]

Every school science lab should have one of these.

[@musicmike1960]

Who else wanted to hear the engine and NOT the music?

[@alyssablacksun]

I think I'll buy it, I'm starting to like it a lot

[@Geoff-n1d]

You assembled a meccano kit -- the real skill is designing and making the components

[@SpamMouse]

A most excellent video, thank you for the upload and great editing. My first thought is would it make a good desk fan, or is the motor/bearings too noisy?

[@landismcgauhey7217]

Great editing in particular!

[@sebastiansebastian20001]

Rewelacyjny model silnika. Jestem zachwycony. Uwielbiam to.😊😊😊😊😊

[@FIREFOX25]

Very cool u just need to find a boat engine model kit now👍👍👍

[@aviadin3502]

Beautifull video and kit. Pity it is so expensive. What did you use for lubrication? Is it mandatory? Thanks.

[@chrispowell6992]

I used to work for GE Aviation. Bravo!!!!🎉❤

[@shushant7701]

It's a very cool airlines engines, moved all over the shop. Amazing. .

[@tonywild1963]

All that work and no real flames. Could of bought an airfix one. Still it just shows the technology that went into building an engine

[@TDog-ic7do]

I want one now!😳

[@Lewy005]

I want one of these so badly, but there’s no way I could ever spend 1k on something like this right now.

[@jamessmith6162]

Absolutely, I was just saying the same thing. But what I find so disheartening, is that they make getting into these hobbies too freaking expensive.

[@reconforsales7708]

@@jamessmith6162 probably cost them 20 dollars to manufacture

[@renaudgoudal5811]

Nice work! Ok, it’s cool to see things moving inside but I regret it’s not moving with kerosene!

[@judebrad]

C919 wants it's engines back!

[@AndyBonesSynthPro]

We have a functional mini-turbofan, that is cool in itself. So I still really need to see a legitimate miniature copy of a VTOL/ STOVL jet in action, performing vertical takeoff, thrust vector into horizontal flight using stable aerodynamic lift, then thrust vector into a controlled vertical landing. Work on a mini-Pegasus rig, or F135- LiftSystem mockup, develop a proper airframe, make a quality video of that process happening & I guarantee you will have an infamous place in history

[@梅凌君]

了不起的科学家 👍

[@sandymacdonald2838]

This is verycool build.excellent video.

[@sh3llz2]

Very cool hobby kit. I wouldnt say it was "BUILT". More like just put together, like a cool lego kit. If it was designed, 3D printed, machined, then, put together, I could CONFIDENTLY say I BUILT IT.

[@tritiumrecords717]

I can't believe people make these, 3d printing has come so far

[@MarcioAparecidoFrancisco]

Com esse projeto fica bem fácil montar um super sônico (utilizando canais de pressão e sucção em retorno aumentando a potência impulsionando os cilindros e transformando em energia que pode ser armazenada em eletricidade continua e desempenhando para um impulso maior)😊

[@teeken8850]

That is so frinkin cool!

[@MaximizedAction]

Do two of those and string a pod to them 🤩

[@LG123ABC]

I was hoping that it would actually fire up. Good video though.

[@Hans_Magnusson]

I reminds me about LEGO and Meccano…! I bet me and my son set a record building the Lego mobile crane. It also comes in multiple bags, I bet a bit more affordable though 😂😂😂

[@davidc9012]

FANTASTIQUE j'adore !!!! 👍👍👍👍👍👍

[@King_TuTT]

that's really friggin cool!!!

[@andyroo3022]

Nice model of a jet engine.

[@PDZ1122]

What's with the rubber gloves??

[@ocotillodavid2296]

The music is to cover the fact that the engine didnt fire. Its being turned by battery power.

[@Thunderboid]

nice warped parts!~

[@richardgiacomo8979]

Show!!!!Quanto um kit desses????

[@jebbait1669]

I like this because it isn't bullshit. More of this please.

[@jasonvincent1818]

Seriously cool, but $1000 for the kit?

[@tarestorations]

Wow ,very awesome !

[@CJ-nt4cs]

Was hoping to hear it spool up. Still nice video

[@andyroo3022]

It is a display model that just turns on an electric motor from what I can see. There are cut outs to see the compressor blades inside. It would never run with the cu touts. ( No Compression of the air fuel mixture) and has no real injectors and fuel supply.

[@mutwazagyematthew7331]

Its so good i have learned

[@SJR_Media_Group]

Former Boeing.... I love Turbofan Engines...

[@carlo6230]

NEXT LEVEL

[@Pedro40932]

¡Muy bueno, muy bien logrado!

[@xvbt5704]

J'en assemble des vrais tous les jours 🥲

[@albertoramonacosta1212]

Impresionante para fabricar tal cual casero los moldes todo muy complicado la gente hacen mas simplificado y funcionan igual obvio para proyect homemade thank Arg

[@winnertoujour]

you are genius you could work for many countries who's developing jet engines. you could earns millions brother

[@ВладимирКасьянов-я4в]

Двигателя ,аксесуары, наклейки. 😮😮😮😮😮😮😮😮😮😮😮😮😮😮🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉русских не обманули, а об............ 😮😮😮😮😮😮😮😮😮😮😮😮😮

[@CarlosCastro-hg7hq]

Excellent video

[@Vicentimo]

That noise🤩 4:00

[@dabneyoffermein595]

I wish they would make these with precision parts, there's a wobble in the cut-out viewing of the compressor blades section

[@blueberrymascarpone2786]

The engine of Tweety's flying birdcage🐥

[@ianbrox]

Cool. It's made of Chinesium!

[@singleproppilot]

Awww. I was hoping it was an actual running engine.

[@Bangferdiecast]

What??? This cool👏👏👏

[@re_ever]

Какая роскошь! 😍🤩🥰

[@garysheppard4028]

Ah yes, this is the engine kit that my Facebook feed has ads for selling for $30. They even use this same video. A $1K kit for 30 bucks? What a deal! And totally not a scam...

[@pierremainstone-mitchell8290]

WOW! I want!

[@OnerousEthic]

Wow so cool!!!

[@robski39]

Beautiful

[@SkydiveHake]

Build two and make a pod racer

[@jean-micheldeleaz7248]

Joli assemblage 🎉

[@andyl2201]

AWESOME 🤩 Engineering 👍

[@omarjassar4650]

Does it produce any pressure ??

[@bobwaterfield7222]

Very nice, WAY expensive but nice

[@desiekosaputrodesiekosaput8915]

guy...mendapatkan ini dimana & berapa harganya? guy...where did you get this & how much did it cost? Tanks

[@danomite8423]

Very cool!

[@ВикторЧижонок]

Я так понимаю начинаем расширяться, скоро будем летать а не ездить, устанавливать так сказать, а вернее бить мировой рекорд

[@maheralazzawi7814]

good job

[@tacfoley4443]

It's a thousand dollars!!!

[@reconforsales7708]

for the 1k price tag, i should be able to fit it to my glider and go flying around the world! there is a company called JetCat that makes these that ACTUALLY work|!

[@youreale]

Nice toy.

[@АлександрСкобченко]

Я уж думал он реально на керосине работает...

[@runnygames9027]

you could make that run for real if you reverse enginer the cutaway plates and make them whole

[@jeremybentley820]

How frustrating - does it actually run? Why did we not see that? If it works it probably pumps quite a lot of air throughbwhat looks like a the 4 stage fan jet.bHee Heee! I love to try and buld someting like that. How wonderful.

[@understandingmcqs6471]

I like your video and wish to assemble like you, but unfortunately it is not available in our country

[@r1250gsarider]

Build ❌ Assemble ✅

[@hello1414276]

Engine Strip and Build, Modules Assemble and Disassemble

[@pedrodiaz5540]

¡ Outstanding !

[@scottwood2247]

So you put it together.

[@azrielstrife2557]

Reverse threaded hardware or flipped footage?

[@francisfos]

génial !!!

[@commander452]

I like it, where can I order one