I built a new VORON, this one is even prettier!

[@willcubemakes]

still no subway surfers 😭😭😭😭

[@bcuttytv]

fr where is my brain nourishment, i’m just listening to some guy talk

[@kanrogcreations]

Im in love with the colors! Good job!

[@jerrysmith6798]

purp frame gang!!! I used polymaker ABS and it printed great. 245/105 were perfect settings for me.

[@takuya2431]

looks great! Clean build, well done

[@TheShrimpfather-aka-Martin]

love the colors!

[@3DWolfEngineering]

well done mate, it indeed looks fantastic !

[@TheGunslingerman10]

You should take a look at the crowncooler toolhead, its fantastic to use with a CPAP fan. Awesome build!

[@mitsubishimakes]

Thanks, will definitely take a look at it

[@shinespark9]

Very cool! Does the gantry flip need different printed parts, or other changes?

[@mitsubishimakes]

@@shinespark9 No changes, you just flip it 180 degrees. Super easy

[@jnssmnsn]

Love the colours, hate the shroud and fan design. Have you considered how those fans ruin the vibrations while printing at high speeds ?

[@mitsubishimakes]

I think that is pretty evident in the input shaper graph I show. I will be swapping to something else eventually, but I'm not sure exactly what I want to use yet. Any suggestions?

[@lolthekidison]

Your other trident pretty cool and all but this one is so 😍

[@dopaminedesigns]

Love the color

[@Rolohaun]

Great video, no points as there was no finished trophy :)

[@williamanthony7224]

Double sheer mounts are 💯 worth it

[@mitsubishimakes]

100%! They made such a difference on my last build

[@Walnut3D]

Caza always saves our cheeks... Great build Mitsu, keep the content coming. This is the stuff we love

[@mitsubishimakes]

Caza is a gift to humanity!

[@Davi_Paca]

I really like the design of the extruder, can you tell me the name of it?

[@mitsubishimakes]

The extruder is a mod of Annex Sherpa Mini by Churls

[@jasonwoody8041]

I had nothing but issues with the belt clamps as well. Ended up dropping it and went to xol.

[@mitsubishimakes]

Xol is an excellent toolhead!

[@jasonwoody8041]

I like it a lot. Though im giving the reaper toolhead a good look at the moment as well

[@mitsubishimakes]

@@jasonwoody8041 I haven't heard great things about Reaper tbh, but hopefully it works decently. I'm thinking about switching to a different dual 5015 toolhead thats a bit more rigid in the future. It's not released yet tho so not sure when I can post about it

[@jasonwoody8041]

What have you heard bad about reaper?

[@mitsubishimakes]

@@jasonwoody8041 The COM isn't ideal, and the ducts don't look very rigid

[@imst4722]

schmexy build! y axis graphs might be more due to the ebb36 mount. It could be flexing under the weight of that umbilical. You might want to try making a 3 pointing mounting solution and adding a little ledge that supports the ebb36 from the back in a few more places.

[@mitsubishimakes]

I'll have to see what I can do to fix it, the umbilical I didn't even think about!

[@-Insert_Name_Here.-]

Dude, the printer is definitely pretty. In fact, it's downright beautiful. Quick thought. I saw at the end of the video the top portion of your printer moving all over the place. Maybe try removing those foot stands on the bottom and literally mount it to the table. FYI- There is triangle shaped corner pieces you can print and use as a bolting point.

[@mitsubishimakes]

The wobbling during the first print is just because it was on a wobbly table. Currently the printer lives on the floor and is much more stable that way. Thanks for the kind words!

[@Reds3DPrinting]

Wow, its beautiful!

[@PrintingPress3D]

if you are cutting your own panels i think you could have left the stock z drive mounts!

[@mitsubishimakes]

Very true! Don't tell anyone but I was lazy and just bought panels from MRW instead :)

[@szymonosa153]

what are those xy joints?

[@mitsubishimakes]

Stock Voron XY joints, just flipped to clear Mjolnir's ducts

[@OriOnTheIguanaHunter]

Are you going to install Monolith on this machine?

[@mitsubishimakes]

Yep, thats the plan!

[@nolankiefer5111]

What’s the fan shroud, can I get a link?

[@mitsubishimakes]

The toolhead? Thats github.com/Armchair-Heavy-Industries/Archetype/tree/main/Archetype%20-%20Mjolnir

[@spectermk1]

Really nice build! Though I think the blue parts holding the z-extrusion and the extrusion between the ab motormounts might be oriented wrong not sure if that matters a lot.

[@mitsubishimakes]

If it is wrong, we'll just say I was preparing for monolith early 😉

[@spectermk1]

@@mitsubishimakes I think even for monolith it would be wrong. Its not the orientation you would need to turn it for mono😅

[@Anziilife]

Archetype Mjolnir!

[@mitsubishimakes]

Funny underslung 5015s!

[@Anziilife]

@@mitsubishimakes I prefer less weight on the toolhead, but I'll watch this once the kids have been put to bed and see what your experience is with this. 😁👍

[@mitsubishimakes]

@@Anziilife Mjolnir isn't heavy at all compared to something like stealthburner or takeoff. Still, could save quite a lot of weight going with a CPAP setup for sure.

[@Anziilife]

@@mitsubishimakes I run XoL on my printers for now and I'm looking at Blackbird for my next printer. 😁

[@mitsubishimakes]

@@Anziilife I love xol so much. 5015s provide about 60% more cooling than 4010s though. I cant pass on those performance gains

[@lozovoymax1941]

Yep. Archetype belt clips just do not work. They have a mod for monolith gantry. You don't need the monolith to use modded carriage. It much better than original. Check usermods repo

[@mitsubishimakes]

Yep, that was Scarecrow's mod that I mentioned in the video. In the meantime, Caza's carriage is working fine for me, but I will definitely be using Scarecrow's design when I switch over to monolith

[@lozovoymax1941]

@@mitsubishimakes regarding input shaper on Y axis, I have kind of same problem, but I went with microbowden for shepra. Love that cable management hole and side placement of PCB. anyway... I think that problem might be in the too big screw holes that keep whole toolhead together. Issue is much more obvious on microbowden due to bigger lever but can guess that flat setup has the same problem. It wobbles on Y axis due to screw hole tolerances. Maybe it was supposed to clamp together securely, but that does not happen. At least in my case

[@lozovoymax1941]

@@mitsubishimakes ok, I figured out the problem with Y axis on Archetype. There is nothing wrong with the mount holes, so want to correct my false statement. TL;DR; - check their experimental branch. They figured out that problem as well. Extruder mount designed to be "flying", it does not touch hotend mount. But extruder motor lever force is enough to make it shake, close air gap and hit right at the top of the hotend mount. Solution would be is to do on the top from the rear the same thing as they did at the bottom. Screw it to the carriage at the top from behind. When I figured that out, I've checked their experimental branch and I see changes that addressing this problem.

[@nahuelise4055]

For some reason it makes me think about jet stingray from megaman x4

[@perz1val]

I don't know if it's any good, but there's a white belt on Amazon, so......

[@mitsubishimakes]

Sadly anything other than genuine gates belt is no good for our applications :(

[@bcuttytv]

alright now tear it apart and throw monolith on

[@ravenous14]

I feel like Archetype's old clips were much better

[@rogers.3dp]

Are you going to top hat this one? If so which one? Asking for the algorithm 😂

[@mitsubishimakes]

The plan is to use monolith panels (and maybe even the gantry too 😄). I do really like Jakoob's tophat though, thats the one I use on my 250 github.com/jakub874/Jakub3DPrinterMods

[@jamesm3268]

That fan setup is horrendous to look at in my personal opinion. Why would you use this over a cpap setup?

[@mitsubishimakes]

5015s are a lot cheaper than cpap, and don't require an upgraded power supply. Currently cooling isnt even this printer's bottleneck anyways. The second round of upgrades will include a 7040 and a 350w PSU though, i just need to find pink CPAP tubing 😉

[@REDxFROG]

You'll never get good input shaper results with this hideous fan layout. Also the toolhead has the center of mass very low which is absolutely bad. :-$

[@mitsubishimakes]

I am gonna be testing out a new toolhead that should hopefully overcome a lot of these issues! I've never actually seen someone test the COM of Mjolnir specifically. I'll ask around and see if I can find the exact point, could be interesting to see.

[@coltenmeredith8899]

Mjolnir actually has a *good* COM. Wtf

[@mitsubishimakes]

@@coltenmeredith8899 Can you send me a pic of it? Maybe all we need are some SLM components for rigidity :)

[@ChazMakes]

No family guy and soap cutting videos? Disliked, unsubscribed and reported to the FBI for tax evasion

[@jazzmusiccontinues1134]

Sorry not pretty. Toolhead wins the prize for goofiest least aesthetic design ever. No idea why all the comments are gassing it up but this ain't it chief

[@mitsubishimakes]

To each their own. I really like the dual 5015s for cooling!