I built a very big wrench

[@Sleeepy.]

"Don't do anything weird though..." He said, 100% certain that in two weeks he will have dozens of incredibly phallic handles in his P.O. box

[@alexschwartz4412]

I was about to add one to the collection but now that he's mentioned it I know I can't be the first; just not enough practice I guess

[@DoctorNemmo]

Yup, I was sure I wasn't the first one to think about that. Ah, the male mind.

[@lucusloc]

I too want to post "inb4 a mailbox full of dildos". The next video in this series is going to get demonetized for sure. We should buy some merch to offset that. . .

[@gordonshumway9792]

Would be funny if he would get a perfectly shaped and comfortable grip however it has phallic shapes carved and painted all over it.

[@kevinleee3408]

Yep thought the same thing

[@jackblack-mj6wk]

Only William can get another successful KZbinr to be a camera man for his second channel

[@micahjones2090]

Ummmm… they’re boyfriends

[@smith7602]

Cameraman Kev

[@b0inGy]

While wearing the shirt for a 3rd successful youtuber.

[@aussiegarbo752]

lol your right!

[@dank_69_420_memes]

​@@b0inGywho's shirt is it?

[@puerabusus9396]

he actually crowdsourced excavator parts what a guy... im gonna send him a dick grip tho

[@kmyerslp85]

His whole response to new handles is going to be blurred with all the phalic grips. lol

[@Cerorororo]

Have to make it comfortable so he is conflicted about not using it. 😂

[@brentlypustelak2574]

I immediately wondered when he asked for grips how many people were going to buy sex toys and dremel out the hexagon shape for the grips.

[@thesleepingone]

My first thought when he asked for grips was the number of male knobs he might get.

[@fredfredburger27]

Damn it time to hit the drawing board again

[@BendsSpace]

Tip: For the excavator handles, you can take literally any 3D model, import it into CAD, scale it to the right size, then subtract the 3D model William linked from it. Anything is on the table :)

[@TreesPlease42]

What an insightful bend of the rules

[@The_Lamp1]

so an among us one is inevitable

[@BendsSpace]

@@The_Lamp1My thoughts exactly :D

[@JPierson217]

As a Guy that Worked on Hydraulic Cylinders I can tell you we never torqued them on. Just a ton of red loctite, and as tight as you can get, it will work. When you take it back apart, pop your piston seal off and burn the loctite out, and the nut will come right off.

[@sharkbaitgaming]

Eyy yes this guy knows! Torquing doesnt always stay either, seen so many vibrate loose and self destruct. Just smother it in red and send it home with the biggest impact you got and shes good haha.

[@awesomestuff9715]

@@sharkbaitgaming dont forget to slap it twice and say "that's not going anywhere" the previous person who worked on the excavator probably forgot to do that as well

[@JPierson217]

@awesomestuff9715 Thats the #1 cause for most Hydraulic Failures. I guarantee he didn't give it the final slaps.

[@michaelransdell]

Look if two men and a torque wrench and loctite can't keep it on, 1000lbs of torque never woulda.... Lol

[@paulovitorsouzanunes4854]

Nothing like a TIGHT nut, emaright?

[@Skatolorian]

I really resonated with what Will said about "sometimes its just about finishing something". Im making mandalorian armour out of steel and was able to sit down today and figure out the electronics for the alpha numeric display. Didnt do any beating of steel, but i did make progress. And im pretty happy with that

[@gregw1076]

Isn't the whole point of making something like that out of steel is that you get to pound on the metal to get your frustrations out?

[@l4gging4days43]

That’s gonna be heavy as fuck

[@Skatolorian]

@@gregw1076 normally yeah! And it does wonders haha. But I was stuck needing to finish the electronics for the LED chest plate display before I could move onto bashing more metal. I think I'm over the worst of it now though. The rangefinder moves and most of the chest LEDs work

[@Skatolorian]

@@l4gging4days43 You'd think so but it's not actually that bad. I've done a few conventions so far in steel mandalorian armour and it's not until the 5 hour mark where it takes a bit of a toll. The latest set of armour I'm working on looks better and has more details with metalwork and electronics, but it's not going to be any more heavy

[@sheeptar-8362]

after 7 pumps I can confirm that is indeed a bigg ass torque rench

[@BIGMANLOGJAM]

After 7 pumps I need 5 minutes, a Gatorade and a cigarette.

[@ChrisRX13]

Ass torque

[@eggyparrot3844]

I regularly watch FarmCraft101, who deals with this type of heavy equipment diy in pretty much every video. Seeing the same type of problem approached with William's crackhead engineering energy makes a weird contrast to John's calm, methodical, almost stoic farmer energy. Great video

[@chengus.z]

My favourite part was when he said “ITS TORQUIN’ TIME” and torqued all over the place

[@kajin807]

I thought you were joking XD

[@NadiaSima-x1o]

Off brand morning time

[@JaredConnell]

He was pretty torqued off

[@thomasfernandez6180]

YOUR NOT PART OF THE TURBO TEAM

[@John_C_J]

Which reminds me of Torque (2004), which was one of the movies of all time.

[@Slumode]

Attempt 1: Hi big Willy, I’m leaving to the navy in a few months and I have something you might like. I have a “new” Acura to replace your old one. I have no where to put my car for when I leave. It’s a 2011 Acura TSX Sport Wagon AKA: The Sporty Boi. It drives, is legal, and is a wagon (What more do you need?!) Price? One crisp hand shake. Seriously, I have no where to put this car and I figure this can replace the crack mobile. It’s free.99. My name is Slumode everywhere.

[@Jdbye]

Fun fact, mechanics will often make their own tools if what they need is difficult to get. So you're right on point :)

[@gliixo]

1:52 I’m not surprised William could effortlessly devour his own child in one bite like that.

[@KaiserBruh]

hey william, last video when you guys got the bus you mentioned how there was alot of "exhaust" coming from the bus. the color of the exhaust was blue, which means that the engine is burning diesel and oil (probably why they wanted to sell it). but this shouldn't really be a problem, by the sound of it that should be a Ford 7.3L power stroke, and it isnt uncommon to see that with those engines. the most common cause of this problem is worn/bad piston rings. to fix it you would need to rebuild the entire engine. however, be sure to check the oil level often

[@bigchooch4434]

Why would you need to rebuild the whole engine? Do worn piston rings imply that the cylinder bores would need refinishing?

[@aidanbotham442]

@@bigchooch4434 You might be able to get away with new rings but more often than not the cylinder bores have kind of machined themselves to the rings and they'll chew up any new ones. And at that point why not reseal it all and get rid of any other problems you might have

[@KaiserBruh]

@@aidanbotham442 exactly. tearing the entire engine apart completely is the biggest hastle, and to not send it to get machined is doing yourself a massive disservice. in my experience as a mechanic, the cylinder walls are usually the ones to cause this due to cavitation and poor air quality (which makes them rough and in turn ruins effectiveness of the piston rings to keep oil out if the combustion chamber) especially a school bus that is running everyday for hours in city traffic, they usually get beat up pretty bad internally (always running and schools not having the budget for proper/consistent services such as changing oil, lube and fuel filters, and air filters (which lets sand and dust into the combustion chambers and causes what i previously mentioned) so getting it machined, maybe bored out a couple thou with better pistons seems appropriate. but this is a school bus they bought as a gag, so just refilling the engine with oil as needed should work for them lol

[@tissuepaper9962]

"If it isn't burning oil, it doesn't have any"

[@TheBackyardScientist]

Have you seen how the engines are mounted in this thing? it would be SO MUCH WORK to pull the engine. Half of it is in the cab 😅

[@wayyninho]

I don’t believe the ratio of ADHD per minute in this video is FDA approved.

[@opi_is_me1576]

William saying don't send him any weird grips pretty much guaranteed he's gonna get some weird ones hahaha.

[@JRWperformance]

69% of them will be dicks.

[@2spark631]

"Finishing that one task" is exactly what I needed to hear. Hardware has been down at home and it definitely leaves you feeling helpless. Glad you're back up and running!

[@Pluckaiy]

The more videos i watch the larger your yard seems to get

[@daltoncrow6486]

I really enjoy just learning things with big willy on his 2nd channel. My wife and I often watch these at dinner. We both still love the remote controlled dog video. Love the content!

[@PartyItUp4Ever]

lol i thought this said "his wife and I" (as in Will's wife) and i was laughing like a jackass

[@qcheg]

0:16 I see Caretaker has mastered the art of evasive manoeuvres around Big Willy and his contraptions

[@georgiamcflyy4772]

torque is stored in the nuts

[@Gunbudder]

this is WAY cooler than a torque multiplier lol. i'm hoping you just went right to making this instead of finding what a torque multiplier is first

[@wumbojet]

Boring nerd thing or BIIIIIIIG wrench? I think the winner is obvious

[@Epic_Eggroll]

yea leverage is way cooler than gear ratios

[@Carlos-Mora]

Chad Archimedes has entered the chat

[@DaniCal1forn1a]

Hidden boring geared thingy or LOOOOOONG boi? Long boi is funner (and also a bit more dangerous, naturally 😈)

[@AllenKll]

uhm... this IS a torque multiplier

[@DC__23]

This is becoming my favorite channel! It’s chaos, educational, exciting, heartwarming, confusing, everything! Love it

[@AdmrlSpeedy]

I work at a place that specializes in manufacturing hydraulic cylinders for heavy duty mining equipment. There are a few options we use to keep the piston from backing off depending on the application and size of the cylinder, but none of them involve torquing to 1000+ ft lbs. Also the cap on the end is called a gland and if you use a longer pin wrench with an actual handle and secure the cylinder in a press or vise, it's way easier to tighten.

[@evanmcdonald9134]

I just watched 10 second channel vids and I don’t think I’ve comprehended a single thing that has happened. My brain has been slowly turning into TV static for the last 2 hours this is pure beautiful content right here

[@SomeoneYouDontKnowOfficial]

This has to be the most productive video Big Willy has ever made

[@bradywalters]

only william could drop some really good mental health advice and then INSTANTLY switch to "I'm gonna dig a hole now." thank you william osman 2

[@Zardif]

Is digging a hole not mental health related?

[@Alexm920]

Can't wait to see William driving his new dual-drive dildexcavator in two weeks time.

[@xyz-zyx]

3:35 Why does he look so chad while explaining how to measure torque lmao

[@Dr.Coconut1245]

i cannot exaggerate when i say this is my favorite series on youtube. every weekend i excitedly await a new video from william osman 2, and to see what antics or maintenance you have been up to

[@helix-tfa]

I feel like Willie is slowly getting more and more unhinged over the years, and I’m all for it

[@intellectualiconoclasm3264]

I would say you were the first engineer I ever saw who road a short bus. But I've known A LOT of engineers. I'm also aware of the confluence between higher level science degrees and neurodivergence. So this checks out 100%, especially when you threw a Florida-man in there.

[@dustinpurcell4489]

Hey Will, dont beat yourself up too much about forgetting to put that cylinder cap on before that piston. I once watched a engine crew forget to put connecting rod nuts on a top fuel hemi engine. They had gotten the entire engine back together and were about to put it back in the car when someone noticed. They were on a strict time crunch as they were rebuilding it in the pits. Needless to say I learned two very important lessons that day, always double check your work. And it is very funny to stick random nuts and bolts in other peoples work stations.

[@pilotdog68]

This might be my favorite William Osman video of all time. Satisfying resolution.

[@placeholderhandle99]

0:05 "Now I can swear" 0:10 "Holy moly"

[@GreatNW]

Man it is actually so cool to see you getting into this for one in all my time working with equipment I have never bothered to actually do cylinders myself so good on you for that and two the creativeness to actually build your own torque wrench like that is awesome

[@thepieguyinthesky2363]

Our church used to get the whole youth group to use hand sanitizer before food, but then they starting like snorting it so they had to stop.

[@JereR]

Clicked on the video because of Erik’s shirt design! ❤

[@TheNak]

The Internet Comment Etiquette shirt he's wearing is one of my favorites from Erik! Also this video is awesome!

[@KoKoKen]

osman and son's coming along remarkably well

[@7thDayAdventures]

Probably rebuilt at least 1000 cylinders like this. Many requiring new pistons, rods, or barrels. Never torqued one in my life. Just heavy duty impact and a little lock tight.

[@herbata9865]

4:31 camera blinks

[@jonshellmusic]

"Don’t do anything weird, though." And suddenly I hear a chorus of William Osman maker fans saying, "Challenge Accepted."

[@GruffDk]

Living vicariously through will is literally living one of the dreams of all time

[@DudeMandango]

Love the shirt! Pappa Erik will be pleased.

[@CallumMuldoon]

william, torque wrenches become less accurate if you drop, ratchet or loosen a bolt with them them because the spring can get damaged. Hope that helps.

[@DerangedScout]

I have only just discovered this channel despite being a fan of you for half a decade give or take. HOW.

[@MellowMakings]

3:54 the youtube like/dislike area lights up when it detects someone say "hit that like button"??? im scared????

[@The_Oddocto]

New feature, calm down

[@MellowMakings]

@@The_Oddocto this is lifechanging information

[@JeffLange1]

I just mailed my 2 grips for you, made them out of ASA for some UV resistance.

[@hadesbearer]

Actually drew the freebody diagram and changed my mind, comment below wasnt entirety correct. --Torque doesn't lever multiply like this, only force does. Draw the Freebody diagram of the setup you have. 250 in, 250 out. You still only applied 250ftlbs in this setup--

[@jsax01001010]

You are kind of right but kind of wrong. Torque does multiple with leverage (after all, look at the units; torque is literally a force multiplied by the distance from which it acts), but it doesn't multiple the way William stated in the video. Let's say his torque wrench is 2ft long. When the torque wrench indicates 200ft•lbs, it means he applied 100lbs of force at the end of the 2ft wrench. (2*100=200) Now when he adds the 5ft breaker bar, it only adds to the distance that the force is acting on, but the force is still multiplied by the total distance, so the 2ft wrench plus the 5ft bar would be a total distance of 7ft, and with a force of 100lbs, that would make the torque at the nut 700ft•lbs. To make 1000ft•lbs of torque at the nut, William would have to apply 143lbs to the end of the wrench, which would mean setting the torque wrench to 286ft•lbs.

[@hadesbearer]

@@jsax01001010 yeah, you are right and I was wrong. Ended up drawing the free body diagram last night and talking to some friends. It's a good assumption trap this one.

[@jsax01001010]

@@hadesbearer You were still right to say that he didn't make 1000ft•lbs at the nut, something that I didn't see any other commenter point out. Torque wrenches in general are a pretty good assumption trap. Most torque wrenches aren't directly measuring torque; they are generally measuring some property related to how force is applied to the handle which is used to infer the torque at the fastener. If you change anything related to how force is applied to the handle or how it's transferred from the wrench to the fastener, it can significantly alter the applied torque versus the torque indicated by the wrench. A common mistake when using torque wrenches is choking up on the handle or pulling with a second hand further up on the wrench. This will overtorque the fastener beyond the torque set at the wrench.

[@NoBody-bm9if]

@@jsax01001010ouh nice comment. At least he was safe to not over-fasten it I guess. Another common mistake is to use some sort of extension because it’s easier to apply the torque on the big boys.

[@K3NnY_G]

6:30 - Amazing Jessie Pinkman impression.

[@Slightly_Happy]

The most comfortable joy stick knob, in my own opinion, would probably be a B&M or Hurst "T" style handle. Just tweak the design, and they would probably work nicely.

[@Zanta100]

we all know he gets atleast one set of dong shaped grips....

[@ForeverANube]

It's gonna be a penis or something phallic in some way.

[@JaxsonGalaxy]

😂Ha! The baby foot creeping into frame really got me.

[@ipv6tf2]

“Don’t do anything weird though” Oh William…

[@tbranscom1]

I know its late but you should never use a thinwall socket, or a 12 point soclet for high torque situations, that one is both. its dangerous

[@WorldRaceMVG]

6:21 I love how even though it's bleeped out we still know exactly what he said

[@LS-jj4sy]

Came to the comments hoping someone would have translated cuz I don't...

[@WorldRaceMVG]

@@LS-jj4sy like balls in an asshole

[@shpup]

kevin whipping the bus around brought me back to a time when my friend rented a uhaul and showed up to my house unannounced. i was very drunk and I got in the back. I told her to drive real fast and I got smacked around like a beyblade

[@KillianTwew]

If you build a Torque Wrench, you also need to build an Untorque Wrench. Cause youre going to absolutely destroy that 200LB one if you try and loosen that with it

[@TheBest14184]

He can just use the extension without the wrench…

[@rednax99]

William is gonna have the best dad lore when his kid grows up

[@Smokinjoewhite]

wait, you have a printer and just need the files right? Make sure you print it in flexible material, so much better on the hands. I made wheelbarrow handles recently and nylon and ASA was horrible with extended use, TPU is the way to go. Preferably softer than the standard 95a. Or you could use 1mm walls and 20% infill so it still has some give to it if you don't have really flexi TPU.

[@mikehowe2768]

The irony of two geniuses riding around on a short bus there’s got to be a good joke in there somewhere

[@badicusvibesimus182]

After having that little goblin introduced into your life, a win like this was needed.

[@KennisEGG]

It's rude to say that about Kevin

[@yatox8]

A couple hadugas with a breaker bar is all that is needed to torque down a bolt. Don't worry I'll make ya some knobs.

[@DiederickABecker]

I'm glad the second channel is now monetized, considering it's become the main channel. Also, William is getting ripped, will CatWarehouse do a Big Willy calendar?

[@Marcus43256]

watching this video ive realized william osman is turning into whistlin diesel

[@Croatilillious]

i see william is sporting excellent merchandise from neon grizzly. truly a cultured gentleman

[@johnstevenson3628]

Only William Osman can be this strangely educational while talking about making a makeshift 1000lb torque wrench.

[@corb805]

I wonder what the chances are that someone makes a handle for the excavator that is not entirely safe for monetization

[@vincehoffman179]

i thought this was one of those videos again where someone gets a big wrench to see how quickly it can destroy/strip nuts or bolts. am pleasantly suprised you actually used it for a good reason :)

[@Tilt_TM]

Can't wait for William to test all of the dick-shaped excavator grips

[@whydoineedthisB]

This is My favorite group of scientists and engineers on youtube.

[@YoungGandalf2325]

5:49 I think you might get in trouble, or get some very concerned looks at least, if you drove a school bus around and gave candy to children.

[@reececrump8483]

William Osman and the excessively large wrench is my favorite YA fiction novel

[@Mike__B]

Williams : Lets put a bunch of Loctite on these threads Me : What did William forget to put on the cylinder? Also Me at end of video : Yup someone's going to send in a CAD for a big veiny... grip

[@KillianTwew]

5:23 You guys should really consider converting that thing into electric with Tesla motors so its terryfing

[@andz23]

One of the creators, where the second channel is better than the main one...

[@djtreq]

I feel like his second channel now is what his main channel used to be like before the fire - same chaotic energy and working on random stuff, just with farm equipment rather than a laser cutter.

[@jmonsted]

The chaotic energy of William and Kevin is... certainly a thing.

[@jmankman4671]

Jesus what a torque ratio 😅

[@BobbyBasketballl]

I've been restoring a vintage motorcycle and that moment of "FFFFFFFF" when you realize you installed things in the wrong order is all too familiar.

[@Smokinjoewhite]

Owning a bobcat and tip truck I can totally relate to this. Especially on the job having a breakdown and having to repair your machine with a completely under equipped toolbox. Or sticks and mud.

[@zach2384]

The light jog when you're fucking sick of what you're doing at the time. So relatable.

[@garyfreeman7122]

Subtitles at 5:02 say "Kevin is the proud owner of a Jew bus". Now I'm wondering what Kevin plans to do with the Jews he collects. Rocket-propelled Jews? Filling Jews with aluminium? I don't know, it just doesn't seem right somehow

[@kismet8010]

I enjoyed the freeform jazz during the momentary chaos

[@halfofp1]

8:19 the only shape that should go here is rubber dong

[@_TheMentor]

Never thought William Osman would slowly convert to AvE

[@LRXCNUMBERONEFAN]

I can tell you smell William

[@Barrel4336]

That's rude, you gotta tell him to distill his sweat into a cologne to sell on the internet

[@garydeleon1230]

i love seeing the beginning of your whistlindiesel arc

[@HamuraiJack29]

A "foot pound"? Is that a unit of energy? I'm convinced engineers come up with this stuff just to make people angry. It's like "Watt hour", they avoid saying Joule at all cost.

[@zcomputerwiz]

I've never related to anything more than Will's screams of frustration.

[@nmoon4237]

You should make a wrench that latches onto stripped nuts.

[@samh.6788]

I work on rotary wing aircraft, the nut that mounts the rotor system to the helicopter always has crazy high torque. For the ch47 thats about 5-7000 ft/lbs. Breaking that nut loose sometimes can take up to 12,000 ft/lbs of torque.

[@4got10jedi]

I always love seeing Chelsea in the background, just going about her day.

[@ronaldzhemelon3882]

"dont do anything weird, thought", and thats when big willy realized people who were not going to do anything weird would now do anything and everything in their power to do something weird ._.

[@greywhite2903]

Those top exits on the school bus are not ment to be opened unless the bus is tipped on its side

[@jackbrett1365]

I used to some light mechanic work on trucks and removing the wheel nuts sometimes required an effect similar to this but we would just place a socket and a solid (non ratcheting) breaker bar on the nut then we would slide a 4 foot long steel tube over the end of the wrench in order to get more leverage onto it. not sure if works the same as what's happening here but it almost always did the trick

[@javidaderson]

I love that he made sure that you can only drive one specific size of bolt, forget the X-ray machine this is the most William invention because it is both a incredible useful and useless invention.

[@Alexander49586]

It's got a 1/2" square drive on it he could turn any size he wanted. He could conceivably step it down to a 1/4" drive and put a super small socket on there which I could totally see him doing

[@kodyswanson4304]

How many t-shirts do I need to buy to get a ride on Kevin's bus?

[@kodyswanson4304]

*no I do not value my own life

[@EPMTUNES]

This is the most useful thing youve done on this channel and its not even close

[@CzBMusic]

I'm glad you used proper comment etiquette to make this video

[@hellofafella]

7:10 when youre the first to get murdered in among us

[@broodpluto2004]

I love you man you're so wholesome in a chaotic way you're probably one of the only KZbinrs I've ever bought merch from