I Combined FOUR Ninjago Dragons! | LEGO Ninjago Building Challenge

[@BricksByMind]

If you enjoyed this video, you can check out more of my Ninjago Building Challenge videos here! kzbin.info/aero/PLAdj_mjFQkuS0VowVvCC7C3jiiBIzfcR9

[@SpidermanFan05]

When's the ninjago sora magazine review yet?

[@SpidermanFan05]

Hey mind I found a lloyd book in Northern Ireland it had s8 lloyd but the book came out in 2023

[@SpidermanFan05]

The books name is ninja power

[@Directtoad]

What if you make the green dragon grading the tower for your next video

[@KletusHatfield]

Dragon

[@Man_of_deen]

2:23 I'd love to see a dragon for Arin. Also I know this is unrelated, but if you could try making a custom dragon for Sora that would be pretty awesome!

[@BricksByMind]

That would be cool! Maybe a brick built dragon head would work for Sora, since it would be a technology dragon…

[@Man_of_deen]

I was gonna say maybe take the parts from her mech and make a robo-type dragon. For the head maybe like the fusion dragon or Lloyd's dragon from skybound. All just ideas though.@@BricksByMind

[@cookerx4]

@@BricksByMind finally you are going to build a dragon for Arin. If you want to know why am so excited it’s because if you go to the original video of the Mech for Lloyd and Arin I asked for you to make a dragon for Arin with the top headpiece of the dragon neck

[@GenesisBlader5565]

@@BricksByMindDRAGON PLEASE!!

[@Man_of_deen]

RIght after Brick Legends video is fitting

[@Marcrozma]

True

[@Shadow_1287]

Mhm

[@jaiveersingh4467]

Yea

[@prittydaniel6059]

True

[@Brickmaker1]

Exactly

[@ShotaRyku]

I recommend a Razor by Gunprimer if you want to remove printing, us Gunpla Builders use it for smoothening plastic but it could also be used for removing printing on plastic

[@kapu5105]

Holy s*** please do the Arin mech dragon! The movie mech dragon was so cool (imo), I would love to see one in my favourite lego color for a pretty solid new ninja!

[@bubbadoo1267]

I would like to see a custom dragon for Aaron, but I'd also like to see you upgrade Sora's bike mech and Kai's race car. Also, why not just paint over the printing next time so you won't have to deal with the hassle of actually removing it?

[@lloydfs5114]

Honestly, both ideas would be cool to see!

[@LeoDoesMinecr4ft.]

id like to see the mech dragon for arin but i have to say bricks by mind you are the goat your videos are amazing

[@DarkRaptor352]

I think a dragon for Aaron would be really cool, especially because of the really unique color pallet!

[@OliveBrick-zn6yv]

Arin dragon mech

[@MrMiraculon]

If you want to remove a print. I accidentally discovered a way how. While attempting to take off a sticker but keeping a print underneath for a Beyblade Facebolt. I found out TOO Much Rubbing alcohol mixed with 70% rubbing alcohol will EAT it away if you let it soak too long. So use those either on their own or combined and then use an eraser or something slightly abrasive to rub the print away.

[@batholomewugwu1046]

An Arin dragon would be amazing and exciting to see so I really hope to see that one first

[@BrandonScott-mi5pz]

EXCELLENT WORK. BRICKS BY MIND LEGO NINJAGO CUSTOM BUILDS 😊😊😊😊

[@midnightwolf96]

I feel like a mech dragon for Arin would be amazing!

[@KURA151]

3:23 Ereser is the best one

[@nightlunastar]

A costum Arins Mech Dragon would be awesome. Maybe you can include these transparent yellow wings parts, but instead as wings, try to use them as spikes on the back. Would be definitly a challenge, because these parts are big.

[@BoltIsCool]

I would love to see an expanded temple! Also unrelated, but do you know if pick a brick will restock Crystalized parts?

[@BricksByMind]

Unfortunately I don’t think so, the parts were on a list of retiring pieces that LEGO put out

[@BoltIsCool]

Ah ok, thanks anyway!

[@drakeo_meateor]

0:22 im looking at mine with my design

[@YoussefAhmedMohiy]

Wow this dragon is very good and i want to see costom arin mech dragon

[@joesiah-ci8hp]

You should combine both ideas

[@morgansmulski]

I would love to see both, but mostly the Arin's Dragon Mech.

[@flamingshowgun9994]

You should make the arins mech dragon

[@tramthun2474]

I say you should make the Aaren dragon first.

[@Mister_doblaj]

THE COSTOM TEMPLE

[@melaniegogel2662]

I really enjoy your building challenges. It would be cool to see Arin get his own dragon since Sora and Wyldfire have their own dragons to ride.

[@ElfyGt]

Dora doesn't have a dragon.or does she?

[@mmesec93]

You should definitely make a dragon for Arin, I would love to see that!

[@Songal18]

Custom Mech Dragon for Arin!! Once again you did a really great job with what pieces you had to work with.

[@theofelixxu2463]

I was wishing you could've kept the wyvern style but still amazing moc!

[@Whip_Chip]

For removing prints with an eraser just keep going at it, the print won’t start to fade for a really long time😂

[@brix_4_life_YT]

Fancy seeing you here

[@Whip_Chip]

@@brix_4_life_YT what can I say? I love minds vids

[@brix_4_life_YT]

@@Whip_Chip Me too and I love your videos also

[@Whip_Chip]

@@brix_4_life_YT well that just makes my day! Any video requests?

[@SpidermanFan05]

​@@Whip_Chipreview the ninjago magazine

[@LeagueofJay137]

Awesome MOC You should make a big temple of the dragon energy cores

[@blyt7]

this looks awesome, i like how the wings look like they are made purely of lightning, next you should definitely do a mech dragon

[@TCOFFICIAL01]

Erin dragon!!!!

[@antoniowilliams6883]

I really want to see the dragon core temple challenge

[@RaiJolt2]

The dragon’s so cute!

[@poketurve28]

The custom dragon with that head mold would be awesome I know I’m a little bit too late but I just found this video ahahaha

[@djt08031996]

Ooh, another MOC by Mind

[@ventoxprimal_16]

A cool mech dragon for arin would be so awesome, mind

[@arimstudios3949]

the nail polish remover technique is the best but you need to be careful when using it and you need to use small doses and the most important part is what nail polish remover you use because some are too strong while others are just right, approximately use weaker nail polish removers for maximum effect.

[@Mkjvj08]

The mech dragon seems cool

[@UltimateSealFan9095]

This is amazing and it looks really organic using very limited parts. Also I have an idea for arins dragon you could make it a fusion dragon between tech and whatever arins power is. Keep up the great work.

[@ethankeidy4872]

I feel like u should do both cause those ideas both sound really cool to do

[@Feethehe]

A Aron dragon would be really really cool in my opinion

[@redshogun2643]

a way to get rid of printing might work by using a sharpie a yellow marker works on getting rid of the printing on a minifigure head (no it doesnt go over it you can see it smudge and you can wipe it off with your finger ) so maybe using a merker close to the colour of the piece may work

[@droid9661]

Temple sound really good tbh

[@zacharylocke87]

when I find a piece with sharpie from little me, I use isopropyl alcohol to rub it off. I haven't tried it on Lego printing so I'm not sure if it will work the same, but hopefully a helpful suggestion!

[@sebchambers7140]

Really want to see the temple!

[@davidsantiago3675]

I LOVE YOUR LEGO BUILDS❤❤❤❤❤❤

[@jjernest417]

Although I am usually someone who prefers to buy the smaller (but non-4+) sets with the occasional dipping into medium or large sets, seeing the way Dragons Rising's two lightning dragons went well together made me interested in both sets. Do you remember the steps you used to build this? I might try building this if I get the three sets I don't have. (I already have Jay's Evo Dragon.) If not, given the way you were able to build one of the alternate designs of 71887 without instructions, I will probably be able to do the same with yours. Also, can this dragon do the "Mom, I threw up" pose? I find it hilarious when you do that with the other dragons in your reviews and building challenge videos.

[@captainyam4995]

A costome aren mech would be cool, I think the mech should be a dragon that would be interesting to see out of you😊

[@abrahammartin4695]

A huge temple, of course!!!!!!!!!!!!!!!!!!!!!!!!!!

[@JacobHughes-r7s]

Cool Dragon like the build

[@THEREALf0cbot]

Video idea:Make bigger versions of the evo dragons,Scale with Lloyd's legendary dragon and Zane's ice creature

[@classyhatgamer3732]

I think a mech dragon for arin would be awesome.

[@mrshowell6151]

I think you should do both of the challenge ideas.

[@Max11273]

Cool moc great job

[@GSLegoMotions]

woah! this is so cool!!!!!!

[@ahmedkhan-oj6ib]

I tried to make this for my little brother (it didn't turn out so good) and since i'm just a kid I didn't have much money to buy more pieces but I was hoping you could make a video or an instructions pdf so i can build it. Just a thought.

[@eeveevaporeon4917]

I NEED to see that dragon

[@YaseenJina]

I would love a custom dragon mech for arin.love your videos

[@ShellingDig9442]

I remove printing by coating it in nail polish then wiping it off before it dries, if you do that a few times the printing should come right off

[@stuartmenzies6509]

I think a Ninjago city dragon would be cool like it came out the ground.

[@YouhaNa-fc8rj]

Verry nice dragon

[@jaxonjohnson7179]

I want the arin dragon more.

[@KURA151]

This dragon looks są similar to Jay's Prime Empire Dragon

[@Bramopjescherm]

Ninjagoooo😮

[@Dualbladedscorpion7737]

For Arin's mech dragon i wanna see it transform into a mech suit.

[@Bric_kproduction]

I would love to see your build of a mech dragon for Arin also since all the 6 ninjas have titan mechs can you do a build change of you trying to build titan mechs for Wu,Gramadon and other characters

[@de3px117]

a big temple would be really interesting to see id like that more than the arin mech dragon tbh

[@willwannaviroj3170]

You should build a elemental Mac for sensei Woo

[@denisepower4515]

I love dragons!

[@one20eight]

For print removal baking soda & water works best for me

[@Smallmight22-py8go]

Absolutely love this guy

[@deepseacocoon]

I wanna see the temple combo first!

[@lucasklaiber7836]

Do both plz I would love it

[@harryodonoghue4334]

For removing printing just get a rubber or eraser and that works great

[@patricktubehd604]

To remove printing use a pencil eraser from on top of a pencil

[@alexmilillo6061]

Metal Polish and a rag Which works better to remove the print

[@Hayware2708]

The dragon looks like the water and lightning fusion dragon from season 6 of ninjago, not a bad thing but this could work as that

[@TobiasBloch-Joergensen]

Do it

[@Gundamfan24k-wr4mv]

I would like to see the Arin dragon moc first

[@KURA151]

2:14 Temple one is better

[@abm8507]

You could use damp sandpaper to get rid of printing that’s what I do

[@realbrickdojo]

I'd like to see you make coles earth golem

[@alexandrugemithchdhehd5900]

😀😀😀

[@edwardh.sutton7187]

you can also make a mech dragon with the head on kai's car from the 4+ set

[@NinjaXGalaxy]

Why not do both challenges 😂 but I prefer the temple because the crystal temple you did a really good job

[@Maximation1]

I personally think that you should do both

[@PChamileon97]

custom dragon also, i don’t know if you have done this but make dragon mech suits for the ninja

[@dinokid1088]

Idea use Jays dragon motorcycle for an upgrade

[@king_of_salsa3218]

You should try to make a alternate version of the crystal council using your minifigs

[@BenjaminBrandt-v2t]

I really want to see an Aaron dragon Mac

[@sonofzeus500]

Aron and temple

[@DEADLYSTORM22]

Do the temple moc!!!

[@OliveBrick-zn6yv]

To remove printing just rub it in sweaty hands

[@ninjabrawlie7424]

Do you have an extra Dragons Rising Nya that i can have last of the 6 ninja i need .

[@AlexMonas]

tell me how to remove printing without damaging my elements Thanks so much for doing all this.

[@dinismatias4142]

It looks great tbh! Also, both lmao!!

[@Roguestripes]

Cool dragon, Not that bad dragon WHAT IS THAT ABOMINATION DRAGON and mid dragon 00:39

[@jeffreymiller2882]

I’ve been trying to build this and I’ve got the head,neck,wings,tail, stomach and legs but I just can’t make that body. Someday I hope for instructions.

[@JessicaCarmenNfonyele]

your awsome keep going!!!!!!!!!!!

[@xiii3791]

I dunno why but I always thought I was subbed to this channel so I guess you earned yourself a new sub?