I FITTED AN M2 BODY KIT TO MY BMW 3 SERIES FROM ALI EXPRESS

Finally back with a new video! Sorry its taken so long but Ive been very busy in the background. Some more BIG news to come after this video too!!
Thanks as always for the support!

[@Jordan_0121]

Nice one Danny - Always loved the shape of these motors. Keep up the good work lad 👍

[@dnewman_7]

@@Jordan_0121 me too pal, appreciate it mate!

[@alexmacdonald4270]

If it has Xenon headlights, it needs the washer jets, for the MOT

[@E92_KJZ335]

For the bumper line, a few washers under the bumper where the front top screws go in. Thatll lift it the 3mm or so it needs to line up. Relating to the lower grills, best bet would be buy some aluminum grill mesh & cut to size. Attatch with tigerseal 👌🏼 so choose a grill style you like cos removing will be difficult 😂😂

[@dnewman_7]

@@E92_KJZ335 nice one mate, I’ll give that a go. Yeah I’m still having a look around for what grill style I like 🤣

[@E92_KJZ335]

@dnewman_7 these suffer with bumper sag when on standard bumpers. I used washers on my old e92 to combat the issue. Also the seat occupancy sensor them 2 loose wires will go in the opposite clip and that should remove the belt light.

[@austinaustin2751]

You have the best looking wheels on your car.., don't change them mate 🙏 What's the Brand name 😁

[@dnewman_7]

@@austinaustin2751 I bought these for the car mate, they’re Aluwerks

[@ASupraGuy]

Nice one mate! Excited for the garage reveal.

[@dnewman_7]

@@ASupraGuy me too buddy

[@MGSCRAP]

Roll on the next video

[@markcovington4761]

Awesome job so far keep it up

[@dnewman_7]

@@markcovington4761 thank you Mark

[@projectclark123]

Wow looks really good keep it up 😊

[@dnewman_7]

@@projectclark123 thank you mate

[@ruttspeed]

Won't pass an mot without the headlamp washers.

[@dnewman_7]

@@ruttspeed ok mate, that’s good to know then

[@whatsdavedone104]

If you have xenon lights i think you have to have washer jets for MOT....halogen lights don't need washer jets....I stand corrected if I am wrong 🤷‍♂️ The bumper does look very good 👍

[@tartanwallpaper]

A LOT of car for what you paid. 👍🏽

[@dnewman_7]

@@tartanwallpaper I thought so too mate

[@richlee5578]

That airbag is the under occupancy IE if a child was sat in there the airbag won’t go off but you’ve disabled the airbag altogether not really good from a safety point of view it’s like when they fit resistor’s to seat belts and people don’t know until an accident happens this isn’t a rant on you it’s friendly advice cos the world as just seen you do it,bite the bullet fix it properly you’re putting looks in front of safety 😮

[@dnewman_7]

@@richlee5578 appreciate the feedback mate, it is something I will change if I ever come to sell the car. Even the garage where it had its MOT told me to get one of the resistors as it’s a common fault on these cars. Will be a full tear down of the seat to get that mat sensor replaced won’t it?

[@richlee5578]

@@dnewman_7 as far as I know it’s not too bad of a job just take the seat out you can see the pad there and possibly a used one will do the job,I think I might have been wrong about disabling the air bag probably disabled just the sensor but just thought I’d mention the possible repercussions if anything goes wrong later on and the MOT garage shouldn’t have recommended this 😂

[@dnewman_7]

@@richlee5578 yeah I thought so mate, I was going to say the airbag hasn’t been disabled, it’s purely just the sensor for the mat. All airbag plugs are still connected, oh I know mate aha I was surprised when they said it to me