I Found The Best Fitting Seat Covers On Amazon | Better Than Factory Fit

[@escheidl]

I've had these for a few months now and they are great! People think they are factory leather. I was having a little trouble with the bottom cover wanting to shift forward leaving a gap. But I just did your trick of using just one disc tying the back and bottom together on each side, (for a total of two discs per seat instead of four) and that solved the issue! Now they are perfect! Thanks for the tip. Nice job on the video. I have subscribed. 😊👍

[@carlosp7233]

I did that but doubled up on the disc for more strength,

[@upthecreekyt]

How have they held up? No tears, fading, or stretching?

[@escheidl]

@@upthecreekyt They have held up well. I just wish they were an inch or inch and a half longer on the seat bottoms. I'm always having to re-adjust them and pull them back to cover the exposed gap where the seat bottom meets the bottom of the back. That is the only issue I have with them. Hopefully they're cutting them longer now.

[@bronxp93]

What brand are these covers? And where did you buy them from. Send link if you can. Thanks

[@Peachess_WNY]

Excellent tips for fitting seat covers! That issue with hiding the gap on non-powered passenger seats is universal, but I found a simple why, to fix it. You just need 3 pieces of black elastic and, 3 of those metal hook retaining clips. Either get the elastic from the straps on old seat covers you are replacing, or you can get it from a craft store. Make a loop with the elastic and sew the non-loop ends to the inside edging of the new seat cover at that gap area - attach one where the seat bottom cover will slip behind the reclining handle, and another one 1/2 the way between and the 3rd just before where the seat edging wraps around to the front of the seat bottom. Attach the metal hook clips to each of the 3 elastic loops and feed under the plastic edge & hook them under the seat. Is it being OCD...yea, probably but, it's worth that little extra step, to get that same clean and smooth look, on both the drivers and passenger side.

[@jporter504]

Just installed front seat covers on my Tacoma. Your video was a big help. One suggestion I have to expedite attaching the metal clips under the front of the seat is to locate a good metal bar or hole in a piece of metal in the proper location and fasten a zip tie there and just clip onto the zip tie.

[@The_Real_Indiana_Joe]

Aren't zip ties awesome? Endless uses!

[@Mushumuffn]

I did this and also used zip ties instead of the clips. I kept finding the clip opening when there was too much pressure on it. Thanks for the tip!

[@jonsanderson6936]

I just ordered a front set from luckyman and have watched a few install/ review videos. They all look good, but they all have the little imperfections you mentioned due to improper install. I'm so glad I found this video and now I'm even more excited for my covers to arrive. I'm now confident that they'll look amazing Edit - they look so good! I never thought relatively cheap seat covers would make my interior look even better. They look just as good and factory as in this video. Highly recommend to anyone still on the fence. I went with one that cover the sides. Not sure I would have looked the one with the entire side uncovered. They still have a pocket for the side air bag

[@Strawman333]

I respect someone who does it right, and can also explain it so eloquently. Much appreciated.

[@zymmer4]

I bought a set of those for my new to me 2011 Ranger XLT..Mine were blue and white to match my blue exterior..They were easy to install..fit like gloves, and smelled like a new interior..Now, a year later, they are still ACES !!! They were just beautiful.

[@Franklin-pc3xd]

I saw this one video on seat covers where the guy was showing off how great his seat covers are. I think they were from Luckyman Club. Anyway, it was weird because there was this huge black stain on the supposedly brand-new seat cover - driver's side. As to this guy, it's really inspirational to see how he overcomes his handicap as an amputee and dopes the installation one-armed - kudos for not allowing the loss of an entire arm to get in your way.

[@thomasdean5651]

The Carhart Precisionfit seatcovers are just as impressive. Different material philosophy, but just as well designed and cut to give the impression they were put on at the factory. Took 4 hrs to install just the front seats on my Tundra, using two hands!

[@blackwing7674]

Great work man, very detailed instructions. It brought some light into some questions I have. I ordered mine last week and still waiting. I’ll come back to this.

[@pewbangpew8109]

Had these for a year now, great look and decent for what it’s meant to do but the material that actually touches your seat is weak. It crumbles all over your seats over time.

[@mikeace42]

Can't believe you did most of this with just one hand! Great video. Thanks.

[@jenny-DD]

That's how he does his woman too

[@-B_G-]

That’s what she said

[@Shunya0101]

@@-B_G-well played.

[@jrjr8738]

@@jenny-DDyoooo lol😂

[@donmr.3555]

You know they do make cheap tripods. Good job but get something to hold the phone while filming so you can use both hands!

[@usa91787]

Follow up: You are correct. These are the best fitting seat covers! I bought them directly from Luckyman Club at about $200.

[@pamlucchino4878]

Did they improve the fit on the passenger seat?

[@Doffythegoat]

Hey man just wanna say I got these for my car not too long ago and your video has helped me greatly in doing this task! One of the best DIYs I’ve ever seen… Great Job!!

[@Deebohhh]

I purchased these covers after watching your video! I found that in order to reinstall the clips that you removed at 4:30, required me to remove the seat as my hand couldn’t fit under there to clip them back in to the factory location. It also allowed me to make sure the front clips were anchored correctly under the seat making sure not to anchor to a cable. No need to remove the seat from the truck but having that extra room by tilting the seat, was key for my installation.

[@SunilPunjabi]

Great video. Do you know if these seat covers are vented or perforated to allow for cooled and heated seats to work through the seat cover?

[@caseG80]

I would think you would want to remove the original seat cover so there's no issues trying to line up tiny holes there website should say if they work or not

[@vsmadhu]

It is a good video with a lot of details and neat look. The only issue is the side airbag, the seat cover will hinder the deployment, god forbid something bad happens.

[@Archifx]

No way. It is an airbag seat cover

[@yolandarodriguez5213]

You are the best I've ever seen you have shown me exactly how to do it with out a problem I watch other videos and could not get the jest of it they didn't seem to know what they were doing you are awesome you are number one in my book

[@shiftwrenchrepeat]

I installed these in a tacoma for a customer after I detailed the truck and was super impressed... im trying to find some that will fit the mercury....but there high backs and I can't find anything..... there are a few companies similar to LMC and I can't find anything that'll work... but can attest to these being great!

[@nancyingram966]

Impressive!! Also impressed that you installed them with one hand, for the most part. Beautiful covers!

[@mikehayden7330]

These look great but the passenger misfit and the headrest are deal breakers for me. If you raise the headrest the edge is exposed and the passenger side looks horrible. Although you doing that one-handed was pretty impressive!

[@MitchellPierson]

Then pay the extra money and get katskinz. The rest of us looking for a cheaper option will be ok

[@jesusguido6986]

Awesome! I installed mine today. About 2hrs of work. But very very happy with the outcome 😀

[@ContemplativeinAction68]

Brother, I hope you are well and I appreciate your video including your authenticity and sense of humor. Thank you!

[@HappyRattata]

ok I followed your instruction, maybe im alone here but when i tried to push the black clips through the back, the back cover was closed? like theres something already there that wont let me push it through. I tried to like unhook the rubber band from the bottom of the cover but i couldnt get it off, so now my seat cover is kind of hanging there with no real support. 2014 toyota corolla, making my life impossible.

[@PonoUkeEd]

The video shows no side exposure on the headrest, but when you go to order them, the side is exposed on the head rest. Please explain.

[@Rayj576]

A+ Job with great detail and tips! You are the reason I will be buying these covers.. Thanks for sharing!

[@fixabadpc]

I found it necessary to unbolt the seats but not bother to remove them entirely, just tip them forward or backward, in order to get access. Not a big deal - very simple and made the process so much easier (for me). Something I found different on my 2012 Tacoma was that my driver's seat was exactly as your video showed (needed to release the clips from the bottom flap of the factory seat in order to pass the 'pucks' through) - however, the passenger side did not require that step at all - the 'pucks' simply pass through between the upper/lower sections of the new covers. Pretty odd they'd make them different.

[@jesusguido6986]

Thanks. I'm sold. I have 400 mi on my 23 tacoma and need to cover up the cloth seats before it's too late.

[@johnward6867]

Jesus, Did these work on your 2023 Tacoma?

[@jesusguido6986]

@@johnward6867 yes sir. 10/10.

[@johnward6867]

@@jesusguido6986 Great. Thank you!

[@jakeb.5489]

​@@jesusguido6986 do these have a strong plastic smell?

[@jesusguido6986]

@@jakeb.5489 can'tt tell. My truck still has that strong new scent! But if any weird smellcwould he from the seats I'm sure I'd noticed.

[@ironeagle2526]

I bought these also for my TRD Sport didn't need back ones that seat will hardly be used anyway thanks for the video I used 4 of those clips per seat worked fine

[@Muddpie3723]

These are super nice looking! I really wish they'd make them for Honda models.

[@noneofyourbusinez]

Excellent review, one idea would be get a tripod or grabbing mount for your camera. You sold me on this cover!

[@dannyc4419]

Wonder if they ever fixed the un powered seat cover? Make it long enough to tuck? Are they still working out?

[@BaysideVirus1727]

Just put the solid black ones on my 22 taco. Solid video! Your method beats the hell out of using all the pieces!

[@urielcoria6511]

Hey I got a quick question would this fit on a 2014 tacoma? Same access cab too

[@noahfarrington6134]

Yes

[@mikesalvato1244]

I got the same covers and I agree with the passenger side outside Cover I'm trying to figure out how to make a type

[@jmg36344]

Can we see what the look like now that they’ve been installed for a while. Thnx

[@matthenderson]

Thanks for the useful video. I was looking for a reasonably priced set of form fitting seat covers for my Tacoma. 👍🏻

[@wildwoodtop]

Is the Faux Leather slippery (butt sliding all over the place) or do they respond like cloth and keep you in place 🤔

[@Archifx]

More like cloth. I actually test drove a Tacoma with leather yesterday. I prefer the feel of these over the leather and I didn’t want to feel that way. It’s just a better seat.

[@usa91787]

I just bought some seat covers for my F150. Similar but not quite the same. I'm returning them to buy these. The headrest area on the ones I have is where I can't stand them. The headrest cover doesn't fit all the way around and the top of the seat is zippered and looks stupid. Great video. I would have used all 8 of those pucks.

[@thinkingimpaired5663]

You did a great job on your tutorial on a solo install of the seat cover. Sad that the company doesn't have a cover available for my frontier. Aren't katskins split leather that's thin? We used to have Katskins installed on a lot of vehicles.

[@minksopro]

Which one did you end up getting and is it for the second gen frontier?

[@thinkingimpaired5663]

@@minksopro I've been so busy that I have yet to choose any seat skin/cover. I just ended up getting something cheap until I decide on a seat cover replacement. My frontier is an 08. I am worried about all the various mechanical issues of the truck, but I have yet to find out what to look for in preventive maintenance. What year is your frontier?

[@sherry3661]

You did a fantastic job putting the covers on while filming!💯👍🏼

[@joenop3393]

Great Tips! I ended up getting these and returned them. The seat portion of the front seats kept coming out. They need to be redesigned.

[@keristabundley1845]

I have a 2022HRV will they fit and how or where can I get them

[@ivyivyivy316]

Best video of this can't wait to install the black ones in my tacoma

[@alanaho4915]

My original 2007 Tundra seats are showing wear but I'm more interested in softening up the seat as they feel hard now... my but gets numb on long trips. How is the padding on the seat? Do they feel comfortable?

[@alternajarsandbladesforble8896]

I have Clazzio Leather Seat Covers for my 2021 Tacoma. These are nice covers too. What's the cost?

[@johnward6867]

Helpful video. Do you know if these work on a 2023 Tacoma?

[@noahfarrington6134]

Yes they do

[@kalliste23]

Since you have extra pucks you could double them up with the cuts crossing so they were more rigid.

[@luissosa4641]

Looks great! To bad they don’t fit on my 2006 Ford Expedition! Any suggestions??

[@ironeagle2526]

Thanks for the video I just put the same ones on my Taco I put some leather conditioner on the them now my truck smells like leather and you can slide in and out easier

[@chiroxxxrt]

Those seat retention pucks won't they move when people sit on n off ? I feel like they will move out of place

[@Archifx]

Won’t budge

[@michaelbatts1642]

Would these fit a 2023 nissan frontier

[@sameertamang2870]

I put the same seat cover. Its been 5 months, still look new.

[@hoosierfan27]

Hi. How are these holding up a year later and prolonged exposure to natural light and regular use?

[@ced264]

Fantastic video. Thanks. Any idea if these will fit a 2024 Tacoma? Nothing listed indicates this. Thanks.

[@susanmalone2788]

Found your video while looking for seat covers for my 2020 Lexus RX350 I just purchased. I wish these were available for mine. Great job on your video.

[@michaeltrombino4486]

This video is great I’ve been debating getting these for my 2022 Tacoma. I hope the back seats for mine aren’t too difficult 😅.

[@Deebohhh]

Easier than the front!

[@rickorourke4464]

You did this with one hand...I think I can do it with two. Great information!!

[@84KingSt]

How are the seat covers treating you nowadays? Do you still recommend them?

[@donovanthompson9947]

I want that same color for my Hilux Surf, where exactly did you find it? Can you post the link here?

[@mikegta14]

The link is in the description

[@kevthedude1]

Do they interfere with the air bags working ?

[@Archifx]

Let me go test. I’ll let you know

[@alanaho4915]

Are you still able to use heated seats, will the heat be felt with these covers?

[@j.b.1897]

I appreciate this more than you will ever know. THANK YOU SIR.

[@pinarellospeedracer]

I will have to say that these seat covers look and fit almost perfect in your truck. great job

[@dennisbalo8583]

Thanks for the video. I'm thinking of getting seat covers for my new F150. However, you didn't go into any detail regarding the side air bags. I was wondering how seat covers work with side air bags?

[@btyhntr]

Outstanding video. Props to you. Respect. Most in depth I've seen. I did subscribe. Thank you.

[@mikem4432]

that looks really nice. I got another seat cover, the drivers seat is the worst getting the clips under the seat is almost impossible to clip together due to the eletric motor for moving the seat.

[@davidleslie949]

So I went to check out the same seat covers for my fourth generation ram 1500 and the seat covers available are the ones with the elastic man straps on the sides of the seat that don't give it a custom look like the ones you installed on your Tacoma?

[@noahearl-jackson5588]

Do they make these seat covers for front bench seating?

[@arlissmills2724]

I have a 2017 Tacoma I have installed two different sets of seat covers can I have a problem with with the bottom cover on the driver side the back slips out I took them off and sent them back have not found a cover that won't slip on the bottom

[@waymire5]

Thanks man. This is gonna save a lot of frustration! Appreciate it!

[@shannond4142]

Do they also have the rear bench seats?

[@saulmarques1934]

I am trying to find out which ones fit 2015 Ford Explorer ? Any help?

[@j2alomar]

If you say Factory ONE MORE TIME!!!! LMAOOO JK. Great video brother! I'm sold!

[@Jan-pw4po]

Thanks for the video. I am thinking about getting this brand, how do they affect the heated seats?

[@botstudioz]

I need this. Will it fit my Toyota Corolla 2020 LE Sedan?

[@wubbagubba8523]

What was the stain on the front seat?

[@Archifx]

Old load

[@wubbagubba8523]

@@Archifx 😂😂😂😂😂

[@marianoneill850]

Do they make seat covers for Fiat Ducato or can you recommend a company that makes them please? Thank you.

[@khem205]

Great work. Thanks for the little tricks. Very beat and looks original

[@tomtomlin7127]

So do you own the co or work for it?

[@Archifx]

Nope. Never even spoke with them. Bought them on a whim and was completely blown away by how well they fit.

[@honestnewsnet]

What's the black mark on your seat cover?

[@Archifx]

Shit streak prob.

[@markwillie]

I think it is sweat from his arm and hand.

[@jontnoneya3404]

I never thought of seat covers - I don't know why but I've had 2 cars with leather seats and one got a hole in the driver seat cuz of me and the other is looking rough. BUT I'm in the market for a new car so perhaps I'll put seat covers on to give them some longer life.

[@kirtlamb4413]

Can use a plastic spackle blade to push that behind the power seat lever.

[@JB-by8zk]

Are these seat covers only for Tacoma vehicles?

[@edwarddunk2731]

Did you maybe get the two seat bottoms switched around?

[@JoshStreetDesign]

Sadly it doesn't seem they make these for the front bench seat option. : (

[@NavyVetJack]

Beautiful job! What’s the white mark on the front of the drivers seat?

[@LegionOfWeirdos]

Wish they made some for my '96 Taco.

[@BillyJ10]

What are they made of? Are they porous?

[@Archifx]

Pleather

[@squawk7777]

Loved the video, just got the all black seat covers today. I like your back seat even more.

[@fredjaeger690]

It will take about six months for those elastic bands to lose their elasticity and for the seat, bottom to creep forward and pull the seat back With it.

[@Archifx]

Still working well

[@fpvraver]

I wonder if these will fit a 2017 Hyundai Santa Fe SE??? They look exactly alike.😊

[@skiitt1988]

I heard you say, that you wished, that there was more material, especially on the passenger side. What if you just take off the original seat covers? That would probably give you that much more material to work with. Just saying.

[@Archifx]

That’s a bad move.

[@torypryce]

Amazing vid, these came out looking OEM!

[@pamlucchino4878]

Do you still have these covers on? How have they held up?

[@paulstrangers2943]

....and your demonstration is bang on.

[@jamesvaughan6789]

Have they stayed in place from getting in/ out of vehicle

[@rhoodj]

Great... good seat covers are never cheap.

[@J-dizzle2021]

I guarantee if you pop that plastic peace off of the passenger seat. You can work that fabric down and pop that plastic piece on which will hold that underneath and look perfect.

[@KT-ed8hj]

Explain

[@ericn8442]

after a year how is the condition of the seat cover?

[@tommythunder9491]

I have a Lexus RX 350 Pebble Beach edition 2009... I got the fronts in just messing with the back set.. They day take the seat out .... What's your thoughts on that.. Thanks..PS. JUST SUBSCRIBED