I got a Prusa Mini+ | 3D Printer | MakerMan

Here i got a seventh 3D Printer (Prusa Mini+ by Fysetc). It is kit to be build, a good way to get busy during the free times.
Having a 3d printer, to make parts for projects
is now easier. i will
be learning to design and use more of 3d printing in my future projects .
This is the link to Prusa Mini+ by Fysetc
www.aliexpress.com/item/10050...
www.fysetc.com/products/fyset...
-------------------------------------------------------------------------------
Music used from KZbin library
-------------------------------------------------------------------------------
stay connected with me in:
Instagram: goo.gl/FfwwnB
Facebook: goo.gl/yLZYTn
to see small projects which not uploaded in this channel.
-------------------------------------------------------------------------------

[@axelSixtySix]

I get the same kit few times ago. As you skipped the auto-check, I can't tell if it was the same story or not. The mount was not flawless as the t-slot nuts was to large to fit the printed parts slots (z-base) My kit had the X motor inverted and had a lot of trouble to get the check up passed : loose connection at the bed (bad crimping), and a faulty hotend thermistor. Hopefully I'm no newbie with a bunch of spare parts on the shelf so I managed to make it work, but you don't buy a kit to deal with issues. Please note the printed parts are Prusa's older versions for most of them, and not always suitable to the provided hardware. The price is unbeatable 174€ here, but the assembly/fixing was a pain in the behind.

[@MakerMan]

I didn't have any issues. I think you just got a faulty unit.

[@axelSixtySix]

@@MakerMan A very faulty unit indeed (parts, wiring, hardware...). I'm happy for you, but I have already noticed that sponsored kits are much often quality passed...

[@Davedarko]

Got myself a non fysetc labelled clone kit, printed the parts myself. seems like it's the same packaging though. the pc4-m10 plug didn't fit, so I had to reprint that part of the extruder. did you get the printed parts with it or did you order them somewhere else?

[@MakerMan]

I got it all with the kit.

[@thomascarey8721]

the part for the pc4-m10 is a separate stl file that Fysetc has a link to. I discovered it after looking thru the documentation and then going to the fysetc github

[@Davedarko]

@@thomascarey8721 I was going from the prusa files and later looked for a part on printables and found one :)

[@RCinematic73]

superb 🎉

[@MakerMan]

Thanks

[@thomascarey8721]

I think it would have been a better review if you added that the buddy board is a 1.0.0 version, the display doesn't have the same optical properties , the bed bearing holders are only wire clamps that can squash the bearing, the unit ships with a minda, not a pinda AND you still have to print the parts. I checked your Aliexpress link and will add that the real Prusa Mini is only about $40 more, shipped, and includes the printed parts & all the upgraded things I've mentioned. I own both the Fysetc and the Prusa. I would only purchase the Fysetc, again, if it was significantly cheaper than a Prusa. When the Fysetc is about half the price of the real thing, I'll buy again.

[@joeking433]

They pack it with newspaper. Hahahaha!